Hi,
I'm having a real though time trying to connect my galaxy s1 to a pc. Have tried everything, like kies, direct connection, reseted the device, and no joy.
When I plug the cable it makes that sound as it is connecting but it doesn't show in the PC anywhere, nor even in Device manager.
It can get pwr from the usb cable when is connected; already tried with another cable and same thing.
My final goal is to unlock it.
thanks for any help
have you tried put yoy're phone in depurating mode?
I guess yo mean Debugging mode, as I couldn't found Depurating anywhere. Have selected it and the same effect
HI
I had the same problem after getting nowhere with it, for some reason and I don"t know why, I put it in download mode and then connected it to odin and my PC found it I then disconected it and its been fine eversince.
Jim
#Samsung Kies always makes problems on Windows x64 !
##I would recommend, if you got 32-Bit Computer, to use that ;-)
#If you Want just flash over Odin, then is this driver package enough
##[Link]--http://download2us.softpedia.com/dl/85b009d47a0940e89eee2297a531d100/4f577870/300141878/drivers/mobile/SAMSUNG_USB_Driver_for_Mobile_Phones_1.4.8.0.exe
#The Package is also enough for If you want just to connect to mass Storage (Phone's SD Card)
Don't Forget to Thanks, if it was useful for you!
_______________________________________________
Hi there.
By direct connection you mean the USB Mass Storage mode, right?
It might be some weird, random problem with the samsung system drivers. I used to have such problems about two years ago, back in the days of Froyo. Have you tried re-installing them? There was a link to proper drivers file in one ICS installation tutorial, and those drivers can be downloaded here. If you go about trying this method, lemme know if it worked.
Cheers.
PS: Unlike diklooc there suggested, do not never EVER go back to x86 OS. That's the worst advice. Kapisch?
Did you check your usb port in System ?
Sometimes it stuck with another lastest device
Hi,
have tried everything, and finally only in a WinXP32 could be abble to get the error shown on the file atached.
But nothing (warnings) come up in Device Manager
Unninstalled everything (kies) and tried to install only the driver and nothing happens.
Should I try to mount it on a linux?
or is it dead?
thanks
i have this problem too
wat chan I do???
my sgs can not connect to my PC
This may help...
Hi there - I don't have the same phone as you, but I did encounter the exact same problem. I've been searching around and it looks like the most common fix was to simply replace the cable. I don't know what kind of cable you have, but my phone (a Samsung Focus i917) uses a mini-usb connector. I found that my Amazon Kindle used the same connector.
When I was using the Samsung cable, I'd get intermittent connects and charge power. The OS would report unknown device. When I switched computer's = same result. I switched to my Kindle cable and the computer instantly recognized the device and installed the drivers. After 12 hours of troubleshooting, factory resetting my phone (blah - lost everything) it turned out to be the cable. I know that this isn't an easy troubleshooting step for most people, because who has an extra cable? I just got lucky that my Kindle uses the same connector. I'm now suspecting (due to the prevalence of this connectivity problem coming from people with Samsung phones - there are a LOT of reported issues) that there is probably a Samsung cable problem in general.
Good luck with your phone.
try
try select mass strong ...
Tips and unlock advice.
nasdriver said:
Hi,
I'm having a real though time trying to connect my galaxy s1 to a pc. Have tried everything, like kies, direct connection, reseted the device, and no joy.
When I plug the cable it makes that sound as it is connecting but it doesn't show in the PC anywhere, nor even in Device manager.
It can get pwr from the usb cable when is connected; already tried with another cable and same thing.
My final goal is to unlock it.
thanks for any help
Click to expand...
Click to collapse
Nasdriver, I currently have a similar problem but mine is related with Samsung Kies as I can't get either my older SGS1 or my newer Samsung Nexus to get recognized by Kies. I also suspected the cable thing and even read it could be a USB port issue but neither of them was my problem (I have 3 cables and 8 ports on 2 computers that result in the same thing). I can connect other devices with the same cables and they work, so I suspect my problem is focused around the Samsung device drivers.
My advice is if you can go in a systematic manner, first focus on the cable (easiest to replace), if you get the same results with a new cable, then focus on the USB physical port, clean it with some Isopropyl alcohol, if the port works for other devices (camera, other phones, etc..) on the same cable but not with the SGS, then try reinstalling the samsung device drivers.
Oh, and if you want to unlock your phone, the EASY way is to download the Galaxy S Unlock application from the Android market (no affiliation) it's free (but the developer does accept donations) and it WORKS. I won't bore you with my 3 week journey trying to unlock my Bell SGS phone here in Canada, had I found this app first I would have done it in less then 2 min saved myself a LOT of frustration.
Good luck
Hi everyone!
I've tried loads of stuff to try and find a solution to this problem, but couldn't find one so far.
Basically, I have what I believe is a u80 SmartWatch. It has a micro-USB port, in which the watch detects if it is connected to a socket charger or a PC.
When plugged into a PC, a notification on the watch tells me it's connected to USB, and gives me only one option: "COM Port". When I tap it, I get an error "Not allow or conflict". Obviously this watch wasn't made anywhere where English is the first language. I changed it to a couple of other languages, and tried again. This time, in other languages, the error changes to "USB: UART2 is busy".
The watch is not detected by any OS or computer that I've tried. It doesn't appear in device manager or USBDeview, therefore I cannot attempt to install drivers to get it functioning.
From what I've read, my watch could be a cheap clone or remake of a u8 or u80 smartwatch, but the developers would have had to get the watch OS on there somehow. I don't intend to flash it, as apparently that can damage clones. I am just trying to access the file system to play around with it and/or tweak some settings.
Does anyone have any idea what these errors mean or how to fix them?
Any help is appreciated.
Thanks!
Bump
Bump :3
Hi
What do you get if the watch is switched off before connecting.
Billythewizz said:
Hi
What do you get if the watch is switched off before connecting.
Click to expand...
Click to collapse
Nothing unfortunately, it just starts charging.
I bought a GT88 off of ebay, brand new. Is there anything i'm missing with this thing? Particularly...
Well, i'll jump right to it. In the menues there is an option for apps, and "uninstall all".
Are there apps i can get for this thing?
Will it work with a freedompop sim card?
What extra things can i do with this beyond the simple menu?
I put a sim card in it... and nothing happened. I can't find how to set APN settings...
i DID find that there's a repository of watch faces as vxp files that are pretty easy easy to install by just putting in the microSD via the cable
Wonder how to fix Gt88 Smartwatch Display
Good Morning.
I have a Gt88 Smartwatch and it said and stated it was IP57 Waterproof so i was showering with it i dont know if screw was a little loose but the Watch Powers on but the Display isn't turning on, its turning on their is audio but the display isn't picturing, I tried opening it up and seeing if their is a display adapter or display ribbon but their isn't. I cannot figure out how to get the display picturing again, i tried to update all the drivers via My M32Cd i7 model Computer i also tried removing the Bluetooth device from devices on windows 10 and reinstalling and setting it up but the display isn't working but that is how all the new smartwatches should be Manufactured compute and function ( through the Computer and computers ) .. can you perhaps send me a video of the procedure in which fix the display.
Thanks.
Akeem Ricardo Wade Ross.
How do I put a password on a gt88 smartwatch?
Maybe I'm searching for the wrong thing but I'm just finding people having the same problem but not what to do about it. After the 7.1.1 update whenever I connect a USB cable to the PC it just goes into charging mode and I haven't had time to mess with it until now.
I've tried several different cables (that always worked until now) and 2 different windows 10 PCs, but even with the different options in the developers options section (MTP, charging only, etc) I never get that option in the notifications section under power, what do you want to do with this? etc.
I'm trying to unlock the bootloader but even in recovery it just says to connect a USB cable and nothing shows up PC side like it used to before the update.
Anyone know what to do about this or point me to a thread I missed with a solution?
Thanks
edit: or even if its possible to revert to whatever stock version it came with?
edit2: Tried a xubuntu livecd, same deal. Kind of rules out OS. Wonderful, going to have to do some ass backwards way to get music on here.
Hi everyone!
I'm totally new to android, even more to android head units. I bought one on Aliexpress (I join pictures of informations) and after days to install everything, everything works fine EXCEPT USB. They charge, but can't transfert datas.
I spent last 5 last days on internet to find a solution but nothing works. That's why I'm here, I wish you guys could help me, I'm getting crazy
So far I tried:
- Clean both 4 and 6 pins USB many times
- Connect just one at a time
- Format multiple USB sticks in FAT32 (even NTFS and exFAT to try also)
- Go to Factory settings using 1617 and 16176699, looking for USB parameters but I don't have the "usb mode" option (picture joined)
- Tapped multiple times on Model in parameters to access debugging mode:
- USB debugging ON and OFF
- In USB configuration, no matter what option I select MTP, PIP, etc.. It select Charging. Sometimes it stays on MTP but when I click on MTP again it goes to Charging
- Probably others things I forgot
PS: I don't have "extra settings" tab on Car Settings, and a lot of options I can see on forums or videos neither
I wanted to upgrade firmware (I don't know if there is a newer one, android is chinese to me) or maybe downgrade it but without USB it's complicated. Maybe it is possible to share WIFI and download it directly on the HU?
The seller always answered me on my previous questions (even so his answers never helped) but when I talked about USB he never opened my messages
Thanks a lot by advance and I pray someone could help me
Search results for query: K2001
forum.xda-developers.com
marchnz said:
Search results for query: K2001
forum.xda-developers.com
Click to expand...
Click to collapse
I already have searched on the forum using K2001 and many other keywords. Most people don't have my problem, or don't have answers. I gave more informations than them so maybe it can help for finding a solution