phone details
samsung galaxy note 4 (snapdragon 805)
5.1.1
sm-n910f
baseband version: n910fxxu1coj3
I was following a guide but then came across a few questions
I am trying to update to 6.0.1 i need some advice about which rom to install as automatic update will not work. Little unsure what region rom to use i am from Australia and this phone model is not a Australian model i am guessing i should use one of the United kingdom ones?
A google search revealed N910FXXU1COJ3 firmware version for Samsung Galaxy Note 4 (Snapdragon) (SM-N910F) from region DBT what is DBT? is there a 6.0.1 DBT?
Just make sure the model number of the firmware matches that of your device. After you have installed it onto your device and just skip through the set up process. Then perform a hard factory reset but wipe the cache partition first. You should now be able to get firmware OTA updates on your device.
Intensify85 said:
phone details
samsung galaxy note 4 (snapdragon 805)
5.1.1
sm-n910f
baseband version: n910fxxu1coj3
I was following a guide but then came across a few questions
I am trying to update to 6.0.1 i need some advice about which rom to install as automatic update will not work. Little unsure what region rom to use i am from Australia and this phone model is not a Australian model i am guessing i should use one of the United kingdom ones?
A google search revealed N910FXXU1COJ3 firmware version for Samsung Galaxy Note 4 (Snapdragon) (SM-N910F) from region DBT what is DBT? is there a 6.0.1 DBT?
Click to expand...
Click to collapse
DBT is just the CSC code, its Germany. Best and most stable I would say is to flash the 6.0.1 united kingdom BTU one.
DarkGuyver said:
Just make sure the model number of the firmware matches that of your device. After you have installed it onto your device and just skip through the set up process. Then perform a hard factory reset but wipe the cache partition first. You should now be able to get firmware OTA updates on your device.
Click to expand...
Click to collapse
I am very new to doing any of this would you happen to know of a good step by step guide?
i am not allowed to link the one i was looking at as i do not have more than 10 posts *sigh
Intensify85 said:
I am very new to doing any of this would you happen to know of a good step by step guide?
i am not allowed to link the one i was looking at as i do not have more than 10 posts *sigh
Click to expand...
Click to collapse
Download the firmware from here. Once downloaded extract it to pc.
https://www.sammobile.com/firmwares/download/111876/N910FXXS1DPK1_N910FBTU1DPI1_BTU/
Download odin from here. Version 3.10.6 seems to work better.
http://forum.xda-developers.com/showthread.php?t=2711451&page=19
On device go to software info, tap build number 7 times until developer options is available. Go on developer options and enable usb debugging.
Open odin, click AP and insert the unzipped firmware.
Turn phone off, once off hold power + down + home until phone boots to download mode.
Plug phone into pc and wait until it says added in odin with a blue COM box. Click options in odin, check auto reboot and f.reset time. Uncheck repartition.
Then just press start, it will flash the firmware and reboot. The first time it boots it may take like 20 mins or so.
Yea I'm having a similar issue too. OTA and smart switch says that my phone is up to date but I know it is not according to sam mobile. My device is sm-n190s XSG and I flashed a stock 5.1.1. Rom months ago. I know I can update via Odin if I wanted to, but how do I update the normal way if I wanted to in the future?
Related
Samsung Galaxy S4 I9505 Original
I am having the problem of not seeing the option in Network menu to enable 4G/LTE. I am running 4.3 right now. Our service provider Ooredoo in this country (Maldives) has released 4G and several others with the same model phone as mine can switch to 4G. I was wondering if there is any fix for this. I did hear about rooting the phone and deleting a file to fix this problem. I can't find out which file. and I have already downloaded a 4.3 firmware that said would fix the problem and flashed it. But there is no change.
And I am looking for the 4.4 Official Firmware for Galaxy S4 I9505 which can be used in my country.. Maldives.
And also is it possible to Downgrade the phone back to 4.3 after I flash 4.4?? From what I know so far it isnt.
I will post more information about the phone soon. Don't have it atm.
Thanks for any help you guys can provide.
Zephiroth said:
Samsung Galaxy S4 I9505 Original
I am having the problem of not seeing the option in Network menu to enable 4G/LTE. I am running 4.3 right now. Our service provider Ooredoo in this country (Maldives) has released 4G and several others with the same model phone as mine can switch to 4G. I was wondering if there is any fix for this. I did hear about rooting the phone and deleting a file to fix this problem. I can't find out which file. and I have already downloaded a 4.3 firmware that said would fix the problem and flashed it. But there is no change.
And I am looking for the 4.4 Official Firmware for Galaxy S4 I9505 which can be used in my country.. Maldives.
And also is it possible to Downgrade the phone back to 4.3 after I flash 4.4?? From what I know so far it isnt.
I will post more information about the phone soon. Don't have it atm.
Thanks for any help you guys can provide.
Click to expand...
Click to collapse
1. Install Kies 3. Look for the 3 letters btw parenthesis close CSC. It will give u the code for know what firmware you have to download.
2. Go to Sammobile.com, log and sig in (pic 1)
3. Look for your firmware and download it
4. Flash it through ODIN like in the pic attached 2
5. Enjoy it
Joku1981 said:
1. Install Kies 3. Look for the 3 letters btw parenthesis close CSC. It will give u the code for know what firmware you have to download.
2. Go to Sammobile.com, log and sig in (pic 1)
3. Look for your firmware and download it
4. Flash it through ODIN like in the pic attached 2
5. Enjoy it
Click to expand...
Click to collapse
Alright so I was directed to a firmware on Sammobile
/firmwares/3/?download=27582
Model: GT-I9505
Model name: GALAXY S4 LTE
Country: Unknown
Version: Android 4.4.2
Changelist: 481100
Build date: Wed, 19 Mar 2014 10:39:06 +0000
Product Code: OMD
PDA: I9505XXUFNC9
CSC: I9505OMDFNC1
MODEM: I9505XXUFNC9
Does the country being Unknown have any effect on the firmware? The I9505XXUFNC9 firmware is said to be the international one but there is one on Sammobile that has country/carrier of Russia.
Thanks.
Hello i have a Samsung galaxy note 3 on three network , i am new to all this and i have googled my question many times only to become more confused. I was curious when my phone will get the lollipop update for uk phone. Future thanks to anyone who can give me any information. P.s im not rooted
zaravacher said:
Hello i have a Samsung galaxy note 3 on three network , i am new to all this and i have googled my question many times only to become more confused. I was curious when my phone will get the lollipop update for uk phone. Future thanks to anyone who can give me any information. P.s im not rooted
Click to expand...
Click to collapse
Hi,
What model of phone do you have? The LTE SM-N9005? If so (and I hope someone could either second this or correct me if i'm wrong) I believe you could flash via odin (and you do not need to be rooted to do this) the lollipop update that O2 has. 5.0 is available for the UK via the sammobile website, so if the basebands remain the same and the phone is the same model, I believe you could just download the 5.0 update from sammobile and flash it via odin.
Since you would be flashing an official version of sammy's rom, you won't need to be rooted, nor have a custom recovery.
Cheers
zaravacher said:
Hello i have a Samsung galaxy note 3 on three network , i am new to all this and i have googled my question many times only to become more confused. I was curious when my phone will get the lollipop update for uk phone. Future thanks to anyone who can give me any information. P.s im not rooted
Click to expand...
Click to collapse
We need know your model and firmware that you are using. Install this APP and add some screenshots here.
reply
Ok phone model is SM-N9005 And firmware is N9005xxugng1
zaravacher said:
Ok phone model is SM-N9005 And firmware is N9005xxugng1
Click to expand...
Click to collapse
so, you are using the sm-n9005, and the firmware u have is the same one as the firmware that the 02 UK version runs in 4.4.2.
Unless I'm mistaken, and if anyone sees I am please correct me, you could flash the 5.0 version with odin for o2 UK. I don't see why it wouldn't work, since it seems you have the same phone and firmware currently in 4.4.2
cheers
zaravacher said:
Ok phone model is SM-N9005 And firmware is N9005xxugng1
Click to expand...
Click to collapse
Your device is using of UK (with CSC: BTU). It still without Lollipop update. I recommend don't flash via ODIN any firmware and wait for future updates (via OTA) if you aren't rooted.
zaravacher said:
Ok phone model is SM-N9005 And firmware is N9005xxugng1
Click to expand...
Click to collapse
You have
Model SM-N9005 Model name GALAXY Note 3 LTE Country United Kingdom Version Android 4.4.2 Changelist 1955971 Build date Mon, 28 Jul 2014 12:56:29 +0000 Product code BTU PDA N9005XXUGNG1 CSC N9005OXAGNJ3
BTU no current update and likely to skip to the next build of Android .
O2 UK firmware can be used on this phone flashed via Odin .
http://www.sammobile.com/firmwares/download/45137/N9005XXUGBOB6_N9005O2UGBOC1_O2U/
Hi, I have a question about update lollipop via OTA.
I have the international version of the note 4, the sm n910h without logos. I just unroot the phone and when I try to update via OTA to lollipop it says i have the lasted version , but I have 4.4.4 kk.
The question is I cant update via OTA if i have unroot my phone?
Thanks and Im sorry for my bad English.
variel30 said:
Hi, I have a question about update lollipop via OTA.
I have the international version of the note 4, the sm n910h without logos. I just unroot the phone and when I try to update via OTA to lollipop it says i have the lasted version , but I have 4.4.4 kk.
The question is I cant update via OTA if i have unroot my phone?
Thanks and Im sorry for my bad English.
Click to expand...
Click to collapse
No You Can't Get OTA update Even you Unroot...But If you Have Still Stock Recovery than You can Update your Mobile VIA Samsung KIES by Unrooting...
TechLife said:
No You Can't Get OTA update Even you Unroot...But If you Have Still Stock Recovery than You can Update your Mobile VIA Samsung KIES by Unrooting...
Click to expand...
Click to collapse
HI, I do have the stock recovery and I try with kies but nothing happened.
variel30 said:
HI, I do have the stock recovery and I try with kies but nothing happened.
Click to expand...
Click to collapse
Than You Have To manually Update Your Mobile By Flashing The Lollipop FirmWare in ODIN...Follow Below Instructions
Download Phone INFO ★Samsung★ To Check Origin of Your Mobile's Country & CSC
After Checking The CSC & Origin Download Lollipop 5.0.1 For SM-N910H Related To Your CSC & Country Origin From Sammobile Firmware
Download Odin3 v3.10.6
Flashing Guide
Backup Your All Data
Make Sure The Drivers Of Your Note 4 Installed On Your PC ( As You Said You Tried with KIES So Drivers are I think Installed But Make Sure )
Do Factory Reset By Going into Recovery Mode (Volume UP + Home + Power Button Simultaneously )
Power OFF The Mobile
Go into Download Mode ( Volume Down + Home+ Power Button Simultaneously )
Run ODIN AS Administrator on Your PC & Attach Your Mobile With PC
In ODIN ID:COM BOX will Show Bluish Color (It means Drivers are Installed for your Device)
Extract The Zip File Downloaded From Sammobile,It'll Extract To .tar.md5 File Extension
In ODIN Click on AP To Browse The Extracted Frimware
Click on Start in ODIn ...Flashing Will Be Start ,Take Some Time To Complete
When ODIN Say Remove The Device Remove It or It'll Automatically Restart the Device
Just Check Auto Reboot & F.Reset.Time Option in ODIn , Leave All Other Options As It is
I Hope It'll Solve Your Issue
TechLife said:
Than You Have To manually Update Your Mobile By Flashing The Lollipop FirmWare in ODIN...Follow Below Instructions
Download Phone INFO ★Samsung★ To Check Origin of Your Mobile's Country & CSC
After Checking The CSC & Origin Download Lollipop 5.0.1 For SM-N910H Related To Your CSC & Country Origin From Sammobile Firmware
Download Odin3 v3.10.6
Flashing Guide
Backup Your All Data
Make Sure The Drivers Of Your Note 4 Installed On Your PC ( As You Said You Tried with KIES So Drivers are I think Installed But Make Sure )
Do Factory Reset By Going into Recovery Mode (Volume UP + Home + Power Button Simultaneously )
Power OFF The Mobile
Go into Download Mode ( Volume Down + Home+ Power Button Simultaneously )
Run ODIN AS Administrator on Your PC & Attach Your Mobile With PC
In ODIN ID:COM BOX will Show Bluish Color (It means Drivers are Installed for your Device)
Extract The Zip File Downloaded From Sammobile,It'll Extract To .tar.md5 File Extension
In ODIN Click on AP To Browse The Extracted Frimware
Click on Start in ODIn ...Flashing Will Be Start ,Take Some Time To Complete
When ODIN Say Remove The Device Remove It or It'll Automatically Restart the Device
Just Check Auto Reboot & F.Reset.Time Option in ODIn , Leave All Other Options As It is
I Hope It'll Solve Your Issue
Click to expand...
Click to collapse
Thank you very much for your help. I will try and see what happen.
variel30 said:
Thank you very much for your help. I will try and see what happen.
Click to expand...
Click to collapse
Gud Luck :good: ...
If You Get any Error/Dificulties To Understand Than Let Me Know ...we'll try to Sort out the issue than...
TechLife said:
Gud Luck :good: ...
If You Get any Error/Dificulties To Understand Than Let Me Know ...we'll try to Sort out the issue than...
Click to expand...
Click to collapse
Hello again, just one question: Is there a chance something may go wrong if I do this? Like brick my phone or something? This is gonna be my first time doing this and am a little scare.
Also i dont know what firmware download because there are two:
Model SM-N910H
Model name GALAXY Note 4
Country Trinidad and Tobago
Version Android 5.0.1
Changelist 4945475
Build date Tue, 19 May 2015 13:13:03 +0000
Product code TTT
PDA N910HXXU1BOE2
CSC N910HUUB1BOD1
Model SM-N910H
Model name GALAXY Note 4
Country Trinidad and Tobago
Version Android 5.0.1
Changelist 4461737
Build date Fri, 20 Mar 2015 10:32:45 +0000
Product code TTT
PDA N910HXXU1BOC5
CSC N910HUUB1BOB2
And my phone is PDA N910HXXU1ANK5, base band N910HXXU1BOC5. So i am a Little confused.
variel30 said:
Hello again, just one question: Is there a chance something may go wrong if I do this? Like brick my phone or something? This is gonna be my first time doing this and am a little scare.
Also i dont know what firmware download because there are two:
And my phone is PDA N910HXXU1ANK5, base band N910HXXU1BOC5. So i am a Little confused.
Click to expand...
Click to collapse
Tell me your Country/Region So I can Suggest you What to Flash
TechLife said:
Tell me your Country/Region So I can Suggest you What to Flash
Click to expand...
Click to collapse
Im from Honduras, Central America. And the phone Country: Trinidad and Tobago
variel30 said:
Im from Honduras, Central America. And the phone Country: Trinidad and Tobago
Click to expand...
Click to collapse
Flash This one it's Latest & updated To May 2015, Don't worry about anything Just Be careful & Keep all Steps accordingly I Mention in above Posts
Model SM-N910H
Model name GALAXY Note 4
Country Trinidad and Tobago
Version Android 5.0.1
Changelist 4945475
Build date Tue, 19 May 2015 13:13:03 +0000
Product code TTT
PDA N910HXXU1BOE2
CSC N910HUUB1BOD1
TechLife said:
Flash This one it's Latest & updated To May 2015, Don't worry about anything Just Be careful & Keep all Steps accordingly I Mention in above Posts
Model SM-N910H
Model name GALAXY Note 4
Country Trinidad and Tobago
Version Android 5.0.1
Changelist 4945475
Build date Tue, 19 May 2015 13:13:03 +0000
Product code TTT
PDA N910HXXU1BOE2
CSC N910HUUB1BOD1
Click to expand...
Click to collapse
Thank you very much for your help. I will try and see what happen.
The firmware are available for two regions: UK (BTU) and the Czech Republic (O2C). You can download these Nougat-based firmware files and flash your compatible Galaxy S7 models manually (you should also be able to update your device through Samsung Smart Switch on your PC). Galaxy S7 edge firmware shouldn’t be far behind, and we will be sure to let you know once those show up in our database.
For S7 Edge : https://www.sammobile.com/firmwares/download/120208/G935FXXU1DPLT_G935FOXA1DPLT_BTU/
For S7 : https://www.sammobile.com/firmwares/download/120140/G930FXXU1DPLT_G930FOXA1DPLT_BTU/
Source: sammobile.com
will it work on dual sim s7 edge (sm-g935f)
sagor1 said:
will it work on dual sim s7 edge (sm-g935f)
Click to expand...
Click to collapse
Yes
Right .. I've been reading and researching this .. but can't find a definitive answer. Perhaps one of you gurus can assist. According to Phone INFO I have the following setup:
Bootloader/PDA/Baeband Version: G935FXXU1DPLT
CSC Version: G935FOXA1DPLT
When I try to use/install the Galaxy Gear VR, I keep getting "network error". From my research, this is linked to the CSC. Question is, how do I restore it to base CSC - without rooting?
Any help would be appreciated.
Cheers.
nice. can somebody upload the firmware somewhere else cuz i have to w8 9 hours to dld from sammobile
antenehnile said:
Yes
Click to expand...
Click to collapse
Thanx...
so i read on the other thread 1st i have to download mm btu rom...than i can flash this is it true?
or i just download this and flash it via odin?
sagor1 said:
Thanx...
so i read on the other thread 1st i have to download mm btu rom...than i can flash this is it true?
or i just download this and flash it via odin?
Click to expand...
Click to collapse
The other thread was created when the full firmware was not available yet, the workaround was to flash mm btu then update to nougat. These are the nougat firmwares as they are now available, not the mm ones. so you just have to flash them and you'll have nougat on your phone.
naryraza said:
The other thread was created when the full firmware was not available yet, the workaround was to flash mm btu then update to nougat. These are the nougat firmwares as they are now available, not the mm ones. so you just have to flash them and you'll have nougat on your phone.
Click to expand...
Click to collapse
Thanks Brother.
https://drive.google.com/drive/folders/0BzXXEylDgfZ0MU1EVnh3YnAtc0k
now i am downloading this (2.15gb!)....is it legit? (find it on other xda thread)
Instructions
Extract (unzip) the firmware file
Download Odin v3.11.1
Extract Odin ZIP file
Open Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
is this right instruction?(sammobile)
Because i am so confused about cse,csx,btu......etc on the other thread
I haven't flashed a different CSC cause I don't want to lose features such as the Mobile data toggle, currently on the Arab firmware since my phone is a Duos, anyone know if BTU has the Mobile data toggle even on 7.0?
daLareid said:
I haven't flashed a different CSC cause I don't want to lose features such as the Mobile data toggle, currently on the Arab firmware since my phone is a Duos, anyone know if BTU has the Mobile data toggle even on 7.0?
Click to expand...
Click to collapse
I didn't try yet another SIM but duos options are there... so Insuppose you wont have any problem with it
Sent from SM-G935FD w/ TapaTalk
I have a Samsung Galaxy A9 Star (SM-G8850) purchased on the Chinese market. Once updated to the latest firmware I get:
AP: G8850ZCU3ASA1
CP: G8850ZCU3ASA1
CSC: G8850CHC3ASA1
Model: SM-G8850/DS
The firmware comes with all the usual Chinese crapware and I would like to switch it to the Hong Kong (TGY) firmware in order to access Google Play Services and use it outside China. I have found the official pages detailing the firmware versions (CHC for China, TGY for HK) and the appropriate page on SamMobile with instructions for uploading a new firmware using Odin.
Is this process safe and/or reversible? Do I need to root or install TWRP recovery first? Are the China/HK versions of the phone hardware-identical? Is there a guide for this for a similar phone that I could attempt to follow, is there anything else I need to consider relating to partition size? Is there a different way to install GApps and Google Play Services on a Chinese market phone? Has anyone tried this before?
Thanks for any help!
Update on progress. Unfortunately this is currently not possible for me since I updated the Chinese firmware from bootloader U1 to U3, and the latest version of the TGY firmware still uses U2. I think it would be necessary to root the phone to downgrade, which would trigger Knox.
CSC CHC: G8850ZCU3ASA1
CSC TGY: G8850ZHU2ASA1
Attempting to flash the old version results in "SW REV CHECK FAIL [abl]Fused 3 > Binary 2"
For anyone who has not yet updated, if flashing directly with the same bootloader level doesn't work, this guide seems likely to work:
https://forum.xda-developers.com/galaxy-s8/how-to/guide-changing-csc-s8-s8-root-t3799045
Using combination files available here:
https://combinationfirmware.com/combination-samsung-galaxy-a9-star
Would appreciate reports from anyone trying this. I will be waiting for a TGY build using U3.
Another update. TGY Build G8850ZHU3BSEB was released, with U3 bootloader and Android 9. Using this firmware, it is possible to change the phone from the Chinese CHC firmware to Hong Kong TGY firmware. The phone changes its model number from Galaxy A9 Star to Galaxy A8 Star. Simply download Odin 3.13.3 and the firmware from https://www.sammobile.com/samsung/galaxy-a8-star/firmware/SM-G8850/ and flash.