p8lite bootloop (can't go to fastboot and bootloader) - P8lite Q&A, Help & Troubleshooting

Hey guys, i have readed all the posts with p8lite bootloop on this forum but no one is helped me. So my problem is that i wanted to set custom rom for this phone but after that he just goes to the bootloop and i can't doo anything with him after his battery discharged, and i can't charge, it just blank red led and that all, i can't go to fastboot or bootloader or anything more just huawei logo thats all or when i press volume up/dwn and power on the screen just apears icon that batery is not charged. With fastboot when i press volume dwn and power he just restarts and just huawei logo no more reaction too this. Sory for my bad english. Someone can help me please? Solved, delete thread. just needet to remove baterry for 5 mins

Sorry but i have the exact same problem, how did you remove the battery, the battery from p8 lite isn't removable....?

Related

logo m and no recovery HELP:(

hi i have flashed cm902 rom it booted up but it dont like me cause makes eroros so i wanted ro reflash with old stock 2,3,3 and with recovery bootstrap i thinked what i wild came into recovery but it just hanged and now no recovery only white triangle with yelow! and only logo m, so maybe someone hav this problem earlier and can help me?cause now im searching half day of work for searching for solution.
thanks fo anny help
Dont worry. Do this. First use the wall charger and charge your phone for at least 30mins. So if your phone is off then it will charge till 70-80%. Check if it is charging by looking at the micro-usb port lighting up.
Now go to the White triangle with ! mark. Then press @ button. You will get options. Select erase data by pressing volume button and then clicking enter button on your keypad.
After the wipe has been done pull out battery. Then start RSD Lite on your computer. Put the battery to your phone. Now press both volume up and volume down together and then power button for 2secs. Leave power button. You will see it in bootloader.
Now load sbf file on RSD software and wait for it to recognize your phone. Then click start. Thats it. Your phone should be ok.

Defy (green lens) JB 4.2 Stuck at CM loading screen and battery problem

So, I've bought this phone about two weeks ago (used) and it was running on CM 10.x (not sure but I think 10.1) and JB 4.2.
Everything was running nice and then about week ago I started to get messages like *google play has stopped* and *google.service.....*...... has stopped* and those were coming at random moments and I could just press ok. It started to bother me but my PC was on repair so I couldn't install new rom or anything. And then few days ago when I was about to go to the bed I've seen that battery was pretty low, but I didn't care. So when I woke up in morning, and when I was about to leave house, just of curiosity I pressed power button about 3 times (fastly) and it started booting, but I had to go so I leaved it and I don't know did it pass CM loading screen or not. And while I was still away my brother took the phone, plugged it in the wall and right away tried to turn it on, it passed GoogleM logo but CM was loading for 10 minutes (that never happened before) so he took the battery out, put it back in and leaved it to charge. Them I came home and took the phone, there was battery charging animation on screen and it was 22%, I've turned it on, it passed GoogleM logo but stuck again at CM loading screen. About 10 minutes passed and I've decided to unplug it and wait for it to load or to eat the whole battery and at the same time i've put one other battery to charge (I have 3 batts' and one charger for em').
Battery drained. Then I tried to boot it with other charged battery, same thing happened with loading and battery indicator was red, I was confused. So I tried bootlader but it said battery was too low. I've put the whole phone on charging again, when it was on 100% I tried to boot it, on CM screen battery indicator went red right away. I waited for few minutes and then took the battery out, when I have putten it back in it started to charge from 0%! When it got to 55% I've menaged to acces bootloader, then I turned it off.
Then also something really weird happened, my battery charger (you just need to put battery in and plug it in the wall) usually lights in blue colour when I insert battery, when it's plugged in wall and charging it's some sort of pink and when it's full it's blue again, so now when I insert 1st battery (onyx) it has blue light only if I press it at some points, and when it's being plugged in wall and charges, colour is dimming (weird).
With 2nd (from motorola) it lights blue when I insert it, but very weak, and dimms while charging.
When I insert 3rd (from motorola) there is no light at all, but light dimms while charging. All of em' worked before that CM loading problem. And I can't acces recovery mode (I press power button + volume down), caution sign appears with android guy behind it.
I would appreciate any kind of help. And sorry for my english.
I think something happened. The batteries got broken or find a friend who got a defy/ defy + , he can give you a full charged battery and try to flash a SBF , and after that , flash cm7 ... cm10.1 ... cm10.2..
How to flash a SBF ? You need RSD LITE. And a good SBF , for you defy ( I mean for your BL , mine got BL6 , BL= BOOTLOADER)
Press Power button + VOL UP , the phone will enter in download mode , and connect it through the USB at the computer , open the RSD lite , select the SBF , and click the device , but before you press start , acces Motorola stock recovery ( POWER BUTTON + VOL DOWN) , an android will show up , you have to press like 10 seconds , the android will show up , but nothing else , press search button or VOL UP and VOL DOWN at the same time , and wipe data and cache. Put the phone back in download mode , and press start .
Danarkin22 said:
I think something happened. The batteries got broken or find a friend who got a defy/ defy + , he can give you a full charged battery and try to flash a SBF , and after that , flash cm7 ... cm10.1 ... cm10.2..
How to flash a SBF ? You need RSD LITE. And a good SBF , for you defy ( I mean for your BL , mine got BL6 , BL= BOOTLOADER)
Press Power button + VOL UP , the phone will enter in download mode , and connect it through the USB at the computer , open the RSD lite , select the SBF , and click the device , but before you press start , acces Motorola stock recovery ( POWER BUTTON + VOL DOWN) , an android will show up , you have to press like 10 seconds , the android will show up , but nothing else , press search button or VOL UP and VOL DOWN at the same time , and wipe data and cache. Put the phone back in download mode , and press start .
Click to expand...
Click to collapse
Thanks I will try that, but what SBF should i flash since my bootloader says 9.10 (in left upper corner) and I'm from Croatia
zmarkod said:
Thanks I will try that, but what SBF should i flash since my bootloader says 9.10 (in right upper corner) and I'm from Croatia
Click to expand...
Click to collapse
No , in Download mode mine says 9.10 too , try flashing some SBF , maybe they will work. http://forum.xda-developers.com/showthread.php?t=966537 There you go. There are a lot of SBFs. I got the U6 (BL6) China , but take care of the flashlight , mine is burnt ;( . Because I played with it when I was on the china SBF.
Danarkin22 said:
No , in Download mode mine says 9.10 too , try flashing some SBF , maybe they will work. http://forum.xda-developers.com/showthread.php?t=966537 There you go. There are a lot of SBFs. I got the U6 (BL6) China , but take care of the flashlight , mine is burnt ;( . Because I played with it when I was on the china SBF.
Click to expand...
Click to collapse
Thanks, so U6 kills flashlite? And how do I put phone from stock recovery to download mode?
Yeah , but only if you activate it , if not , it will not kill your flash , to put the phone from stock recovery to download mode , choose the first one , and after that Press the POWER BUTTON + VOL UP ( Download mode ).

Huawei p8 lite stuck on logo and wont charge

Hello guys,
I know these topic is there a lot of times wrote, but i found i have one more problem that the others.
I was installing custom rom through TWRP, it looked like all went successful but phone get stucked on huawei logo.
I tried a lot of things from lot of forums. I downloaded update.app, basic recovery, but when i wanted to install it. I recognize
I didnt charge phone through night. Now my phone is discharged and i cannot go into TWRP or fastboot. When i plug it into charger
it charge only to start bootloop ( i suppose). i cannot go to twrp or fastboot cause when i hit volume up and power button, telephone just restarts
and shows he is discharged. When i let it to do what it want, it charge a little, then start bootloop. After bootloop discharge battery, process start again
It looks like phone will charge only a little just for bootloop for a small time.
Anybody knows what to do? I am sad
Nidure said:
Hello guys,
I know these topic is there a lot of times wrote, but i found i have one more problem that the others.
I was installing custom rom through TWRP, it looked like all went successful but phone get stucked on huawei logo.
I tried a lot of things from lot of forums. I downloaded update.app, basic recovery, but when i wanted to install it. I recognize
I didnt charge phone through night. Now my phone is discharged and i cannot go into TWRP or fastboot. When i plug it into charger
it charge only to start bootloop ( i suppose). i cannot go to twrp or fastboot cause when i hit volume up and power button, telephone just restarts
and shows he is discharged. When i let it to do what it want, it charge a little, then start bootloop. After bootloop discharge battery, process start again
It looks like phone will charge only a little just for bootloop for a small time.
Anybody knows what to do? I am sad
Click to expand...
Click to collapse
Just put it for charge don't wory about bootloop after sometime disconnect charger and hold all three (volume and power) button until you see Huawei Logo....Theb release power and keep holding volume buttons....
And remember to put your UPDATE.APP in dload folder on your SD card before all of it
HaiderHady said:
Just put it for charge don't wory about bootloop after sometime disconnect charger and hold all three (volume and power) button until you see Huawei Logo....Theb release power and keep holding volume buttons....
And remember to put your UPDATE.APP in dload folder on your SD card before all of it
Click to expand...
Click to collapse
thanks, but dont i have to install stock recovery first? i thought i removed upgrade one when i installed TWRP...
but ill try to have it in charge for hour then ill try holding buttons.
Update:
I let phone in charger for a hour. After hour it is still flashing red, when i try to hold buttons, phone just turn off and then flash red.
<- it didnt charged.. i still think problem is it charge a little, then start booting, --> booting discharge phone --> phone will turn off --> automatically
start charging a little --> then it start booting again --->then it repeats.
I know I am stupid, i should just let it in TWRP before it discharged, but it happened what now?
It looks like my problem is to charge now, do i have to do some manual charge?
Nidure said:
thanks, but dont i have to install stock recovery first? i thought i removed upgrade one when i installed TWRP...
but ill try to have it in charge for hour then ill try holding buttons.
Update:
I let phone in charger for a hour. After hour it is still flashing red, when i try to hold buttons, phone just turn off and then flash red.
<- it didnt charged.. i still think problem is it charge a little, then start booting, --> booting discharge phone --> phone will turn off --> automatically
start charging a little --> then it start booting again --->then it repeats.
I know I am stupid, i should just let it in TWRP before it discharged, but it happened what now?
It looks like my problem is to charge now, do i have to do some manual charge?
Click to expand...
Click to collapse
I have the exact same problem, sitting here with my bootlooping p8 lite and can't charge it.
I charged it overnight and even then it was flashing red and showing that the battery is low.
Can't boot into recovery (TWRP) or Bootloader, just don't know what to do, is there a method to charge it or boot somehow?
Sometimes you need phone to be connected to pc to reboot into bootloader. I have read from somewhere that if you connect phone to pc and hold only "volume -" it will boot(I haven't tested myself). I once had similiar problem with honor 4x and just trying to reboot it like 3h it somehow got to bootloader. I also had problem not charging.
keikari said:
Sometimes you need phone to be connected to pc to reboot into bootloader. I have read from somewhere that if you connect phone to pc and hold only "volume -" it will boot(I haven't tested myself). I once had similiar problem with honor 4x and just trying to reboot it like 3h it somehow got to bootloader. I also had problem not charging.
Click to expand...
Click to collapse
Alright, I've already tried it when connected to pc. But I'll try it once again with just pressing volume down
I'll give there update
Nidure said:
Alright, I've already tried it when connected to pc. But I'll try it once again with just pressing volume down
I'll give there update
Click to expand...
Click to collapse
Conectado​ to PC try power button plus volume up.
if anyone curious. just block volume down with some gum or chain or something and then put it to charger. It will not start bootlooping
Had the same problem just let the phone discharge for a few days (when you press the power button it should not blink red) then hold the volume button in the middle and plug it into the pc it should boot into recovery mode. Download the stock firmware for your model(UPDATE.app) and use the update extractor to get the boot, system, cust & recovery images and install them using fastboot commands. Or you could download the unbrick files from the mega thread for your device (dual or single sim) and replace the boot, cust, system & recovery images with the ones of your stock firmware and the use the install bat
I solved this problem by disconnecting the battery 3 months ago

My huawi dont work!

Hello, so today i was trying to root my Huawei P8 Lite with BetoOS rom. When i installed rom my phone reboot and now phone stucks at huawei logo and thats it.. Nothing happening even after 1h.. I press volume up + power button and nothing, just logo and thats it... What i can do now???
P.S. Sorry for my bad english
http://hi6210sft.blogspot.com/2016/05/unbrick-huawei-p8-lite-via-fastboot.html?m=1

P9 Lite won't boot into recovery mode or in normal mode....

Hey all,
I received a huawei p9 lite (VNS-L31) from a friend of me. He asked me if i could take a look at it as he said he updated it and now his phone is broken.
I was taking a look at it but as soon as i want to power it up it don't respond, as soon as i put it on a charger (Phone or usb)
A red light is blinkin, then i can hold the power button. Then the red light is blinking 3 times very fast and then it just go's back to blinking.
I tried also some other things but none of them work.
- Wont boot into recovery mode
- Will boot into fastboot
; Phone Locked
; FRP Locked
- Tried the 3 button download mode (Wont do anything to sadly...)
Anyone got a suggestion what else i can try to do to make the phone work again if its not perma broken yet?

Categories

Resources