CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.1.* (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial CyanogenMod 14.1 (v2awifi) ROM for the Samsung Galaxy Tab Pro 12.2. The following will not be supported here:
Custom kernels
Mods
Xposed
Do not ask for ETAs. If you do, I will ignore you and your post.
SEANDROID ERROR
If you see a message at boot about Recovery or Kernel is not SEANDROID Enforcing, you can ignore it. This is just telling you that you are not running Samsung stock software. It has no effect on recovery or the ROM itself nor related to either.
I don't support Xposed and any logcat which includes a Xposed module will be ignored.
You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Bootloader Information
You need to make sure you have a Lollipop bootloader installed or else your device won't boot. Here you can go grab the latest bootloader and odin and flash it in download mode. Read all the steps before you do this.
Make sure you have a full backup because just in case you something fails.
Here are the steps to flash this via ODIN:
Make sure you have a full backup because just in case you something fails. Here are the steps to flash this via ODIN.
Reboot your tablet into download mode. Do this by first switching off the phone, then pressing and holding the volume down + home button together and then pressing the power button. Press volume up button to enter download mode.
Open ODIN on your computer. You?ll see the ID:COM box turning yellow with a COM port number upon successful connection with the tablet.
In ODIN click the BL button, select the bootloader firmware. It's a tar file.
Make sure Auto Reboot & F. Reset Time options are selected in ODIN
Click on the start button. When the process is completed your phone will reboot.
Installation
Download the zip(s)
Install a compatible Recovery (This will not work with the P900 recovery)
--I have built a new version of TWRP with the MM kernel. MTP, Vibations, ADB now work and there are performance increases. The rom will need to allow v2awifi naming for flashing in recovery. Link
Perform a nandroid backup of your current ROM (optional)
Wipe data/factory reset
Flash CyanogenMod
Install the Google Apps addon package (Optional)
Reboot
Issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs or it didn't happen! You can use this: Syslog App
Downloads
Nightlies
Latest Nightly Date 12/23/16
Device Builds
Google Apps
http://opengapps.org/ - Thanks to the OpenGapps team!
Use the 7.1 and Arm options when downloading.
Issues
"Ok Google" voice fucntion is not working
Lower than stock audio volumes
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging, & documentation.
Source:
Kernel: Link
Device Tree: Link
Credits
@Valera1978 Initial device tree
@UpInTheAir for his kernel magic and misc fixes
@chhaggerty, @tbjr50 and @titidu3701 for their testing efforts
Exynos5420 Dev Team ( @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588 )
XDA: DevDB Information
[7.1.x|SM-T900| Unofficial CyanogenMod 14.1 (v2awifi), ROM for the Samsung Galaxy Tab Pro 12.2
Version Information
ROM OS Version: 7.1.x Marshmallow
ROM Kernel: Linux 3.4.x
Status: Stable
Created 2016-12-23
Last Updated 2016 -12-23
XDA:DevDB Information
[ROM][7.1.x|SM-T900| Unofficial CyanogenMod 14.1 (v2awifi), ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
thompatry, @deadman96385 @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart @tincho5588 @ShevT
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Galaxy Tab Pro 12.2" (Wi-Fi)
Based On: CyanogenMod
Version Information
Status: Stable
Created 2016-12-23
Last Updated 2016-12-23
Reserved
Deathly Adiutor App
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Deathly Adiutor is an open-source, modified version of Kernel Adiutor made specifically for Exynos 5420 devices.
Features
Power Saving:
S-Pen Power Saving - Same as in Touchwiz, disables S-Pen detection if it's inserted in the slot
S-Pen Input Booster - Instantly increase CPU frequency when the S-Pen touches the screen
Touchscreen Input Booster - Instantly increase CPU frequency when you touch the screen
Touchkey Input Booster - Instantly increase CPU frequency when you touch the capacitive buttons
Touchscreen Glove Mode (Not all screens support this)
CPU Control:
CPU Settings reworked - Deathly adiutor back-end was cleaned up to work specifically with our CPU
CPU Thermal - Control all thermal throttling points for the CPU (make your device run colder... or even hotter)
GPU Control:
GPU Time in States - Same as CPU Time in States (Times in each frequency)
GPU Frequency Control (not yet supported on Nougat)
GPU Voltage Control (not yet supported on Nougat)
GPU Governor Control (not yet supported on Nougat)
Battery control:
Full power statistics - See current and maximum charging currents and current source of power
Unstable power source detection - Lowers current until the power source is stable
Customize charger current limits - Make your device charge faster (safe, if the charger can not supply enough current, the board will dynamically decrease the current)
Screen-On current limiter - Limit charging if screen is on (to avoid overheating)
Speakers:
Privacy mode - Disable main speaker if headphones are plugged in
Earpiece volume
Left/Right speaker volume
Speaker equalizer
Headphones:
Left/Right channel volume
Mono output mode
Headphone equalizer
App Themes:
Light theme - White and Red
Dark theme - Grey and Red
Credits
This post was written by @ZakooZ
This app is brought you by the exynos5420 developer team: @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588, @ShevT
Translators:
@ShevT - Russian
The following people deserve distinction for their major contribution:
@tincho5588, responsible for 80%+ of the code for the new features
@deadman96385, the main maintainer of the Deathly kernel and most of the remaining code
Downloads
The app can be found in the Play Store:
Free version (with ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.ads
Donator version (no ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.adfree
Helping the developers
You may have noticed there's 2 versions of this app, one ad-free for donators and one with ads.
You can help us by clicking ads you're interested in for the free version, or purchasing the donator version!
We will use the money generated by this app as common money for the developers of the team. It will be used to pay for our web-hosting (we own a gerrit server and a domain name, exynos5420.com). It will also be used to buy a new device if one of ours breaks.
Translating the App
You can also help us by translating the app to your language:
1. You can start by looking at the full english language file: Link
2. Then compare it to your unfinished language file. You can find it here, under values-xx/strings.xml, xx being your language abbreviation.
3. You can then fill-in the missing strings in your language file. Here's an example of what a proper update looks like.
4. Then you can submit your translation by using our gerrit. If you don't know how to use gerrit, just PM the translation to your favorite developer and he'll get it merged!
Reserved
Finaly, a working Nougat for the awesome tab pro.
Love this tablet but the support from samsung is terrible. Stuck in 4.4 Kitkat and the tab deserves an better version.
Had a working Lollipop but it was buggy like hell.
This release is working perfect, and above all, its fast and smooth.
Nothing like the buggy Lollipop.
Keep up the good work, love this release.
How do I get rid of the popup message "com.android.phone has stopped" with the close app option which never causes the message to go away? Should I reflash the device? Please advise I am not a novice with rooting or flashing devices but a 1st with this model.
Any help would be appreciated.
---------- Post added at 03:26 PM ---------- Previous post was at 02:53 PM ----------
lexena said:
How do I get rid of the popup message "com.android.phone has stopped" with the close app option which never causes the message to go away? Should I reflash the device? Please advise I am not a novice with rooting or flashing devices but a 1st with this model.
Any help would be appreciated.
Click to expand...
Click to collapse
Never mind I fixed it! I just cleared dalvik cache and wiped to factory settings.
Can you work on one for the galaxy tab pro 8.4? I am going to try to flash this one on it, to see if it even works, but I would like to see android 7 work on my daily driver
teknonerdz said:
Can you work on one for the galaxy tab pro 8.4? I am going to try to flash this one on it, to see if it even works, but I would like to see android 7 work on my daily driver
Click to expand...
Click to collapse
Already started
Sent from my SM-T320 using Tapatalk
Possible bug while watching any video
First, thank you so much for your work. Everything went smooth. After install and installing some apps, I noticed when I watch video, from any app such as watchESPN, Facebook or youtube, the video starts out normal and then zooms in to the top left side of the video. Anyone else having g this issue? I thought it was some accessibility setting, but it is not. This is definitely a bug. I don't think it's a hardware issue because this did not happen with KitKat.
Thank you
Hey great Work.
Does it work with the 905 too?
Or is the differnt CPU a problem?
Thx for answer
Awesome rom been using it since posted i used kernel app to increase gain on the volume sounds a little better but i cant wait for updated fix on it thank you so much for your hard work
jeffdattilo02 said:
First, thank you so much for your work. Everything went smooth. After install and installing some apps, I noticed when I watch video, from any app such as watchESPN, Facebook or youtube, the video starts out normal and then zooms in to the top left side of the video. Anyone else having g this issue? I thought it was some accessibility setting, but it is not. This is definitely a bug. I don't think it's a hardware issue because this did not happen with KitKat.
Thank you
Click to expand...
Click to collapse
I just saw this happen on my device as well.
Hey all. I found a typo in some of the code that caused a bad build. I apologize and I new build will be coming out tomorrow from Jenkins.
Is this new build out? Thanks!!!!
thompatry said:
Hey all. I found a typo in some of the code that caused a bad build. I apologize and I new build will be coming out tomorrow from Jenkins.
Click to expand...
Click to collapse
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://download.cyanogenmod.org/
KLTE GSM CM Forum
KLTVD/S CDMA (Sprint/Verizon/USC) CM Forum
I couldn't find a thread dedicated to this, so..... As well all know, CM has turned on the builds for the Samsung Galaxy S5 variants and builds have been churning out for the past few weeks. However, they are still weeks behind @albinoman887's unofficial builds, missing various fixes and what have you. So this is a thread for those of you who wish to try out the official nightlies and want to post bugs or feedback without cluttering the unofficial's thread. If you want to help get things going smoothly, contact Ethan Chen (https://twitter.com/intervigil) and ask him to push Matt's (albinoman887) changes through. With that said, some info from albinoman887 (sorry, had to borrow this):
albinoman887 said:
Built from CM source
Service
Text
Data
Call
Audio
WiFi
Google Now
Bluetooth
GPS
MMS
Video playback
Audio playback
Internal/External SDcard mounting
Camera
Video recording
IR Blaster
NFC
Touchscreen in some games....
Lots of CM features you expect are missing at this point. All devs are working on adding all your favorite features of CM back in.
CM Camera app is buggy as hell right now, use Google Camera
Do NOT use superwipes
Wipe data, cache, and dalvik cache
** (if you are simply applying an update to this rom base this might not always be required)
*** ((but do not report bugs if you didn't full wipe))
Flash ROM
Flash GAPPS (in 2nd post) (No other gapps packages are officially supported!)
Reboot
???
Profit
To enable Developer Options and Performance go to Settings, About Phone and repeatedly press Build Number.
If you use ADB read this: PSA by CM
If you use reboot to recovery read this: PSA by CM
Regarding new Superuser: PSA by CM
Read the FAQ thread here before posting any questions in this thread: FAQ
And any and all users in this thread who contirbuted or will contribute to making this ROM as stable as possible
Esa Laukkanen aka elelinux
Cyanogen Inc & Team-Kang
Garwynn XDA
albinoman887
Contributors
albinoman887
Source Code: https://github.com/Team-Hydra
Click to expand...
Click to collapse
WARNING! This ROM is for the SM G900* snapdragon only! This will not work on the octa-core or Exynos versions
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
CM-12.0 Install Guide
Note: CM for Galaxy S5 LTE is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.
Download CM-12.0 and gapps-lp zips, kernel, TWRP 2.8.4.0 and other zip stuff and put in /sdcard
ROM: http://download.cyanogenmod.org/?device=klte
gapps: http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900
Use TWRP 2.8.1.0 tar flash thru odin http://techerrata.com/file/twrp2/klte/openrecovery-twrp-2.8.1.0-klte.tar and thru this recovery flash this one Ktoonsez TWRP 2.8.4.0
http://goo.gl/LgBsuk
[*] Wipe data and cache.
[*] Flash cm-12*.zip.
[*] Flash gapps*.zip. You must flash gapps after every upgrade to CM-12.0 since /system is formatted, wiping your previous add-ons.
[*] Reboot phone.
for now on CM12 nightly works best with Ktoonsez kernel http://goo.gl/LgBsuk
thread: http://forum.xda-developers.com/showthread.php?t=2777842
Upgrades
Upgrades from previous versions of CM-12.0 are the same process as install, except you do not need to wipe anything. Contrary to popular belief, you do not need to even wipe cache and dalvik-cache when upgrading between CM-12.0 versions. You only need to wipe if you are doing a major upgrade, switching to a different ROM entirely, or attempting to fix bugs caused by bad backups or corrupt app data.
other stuff
Camu camera and camcorder app: https://play.google.com/store/apps/details?id=com.sumoing.camu&hl=en
Emoji switcher https://play.google.com/store/apps/details?id=com.stevenschoen.emojiswitcher
Whattsap time/date fix https://drive.google.com/file/d/0B9hyzUTns_hgX2xiTTJjQjNXd1k/view?usp=sharing (flash thru recovery, reboot and it works.)
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
---------- Post added at 12:18 AM ---------- Previous post was at 12:05 AM ----------
28.01. nightly, kt 28.01. kernel works fine..
is quick unlock still not merged in CM? like it was in cm 11.. i have to pull screen up and than unlock..
using Camu camera app https://play.google.com/store/apps/details?id=com.sumoing.camu&hl=en
which gapps package guys you use? nano, pico?
except one fc of stock dialer and 3 hours of good working..
tinko975 said:
WARNING! This ROM is for the SM G900F snapdragon only!
28.01. nightly, kt 28.01. kernel works fine..
is quick unlock still not merged in CM? like it was in cm 11.. i have to pull screen up and than unlock..
using Camu camera app https://play.google.com/store/apps/details?id=com.sumoing.camu&hl=en
which gapps package guys you use? nano, pico?
except one fc of stock dialer and 3 hours of good working..
Click to expand...
Click to collapse
Change that red text to "WARNING! This ROM is for the SM-G900* Snapdragon variants only! This will not work on the octa-core or Exynos versions."
I might also want to add that it is said that it is best to use the official Gapps from here, but the PA Gapps have worked fine for me.
I have contacted Ethan Chen and he said that he just hasn't had time to look at the S5 lately. Sounds a bit promising.
My results on the 1/28 nightly with ktoonsez' 1/25 kernel build:
* Bluetooth pretty much set, occasional minor hiccups on my car audio but otherwise great.
* Bluetooth does still occasionally completely crap itself and stop audio playback after a long period of time (>5 hours). If this happens, a reboot is required, and trying to turn bluetooth off and back on results in an FC in Bluetooth Share.
* Camera is still crashing when taking low-light photos.
Haven't encountered any other issues so far.
Edit: OP mentioned TWRP recovery; I'm using philz touch with no issues.
On 900i (kltedv) doesn't work NFC !
The 1/30 nightly has issues with the Recents menu - it seems that the majority of the time, trying to activate it from within an app silently fails. It does work from the home screen, though.
sylvisj said:
The 1/30 nightly has issues with the Recents menu - it seems that the majority of the time, trying to activate it from within an app silently fails. It does work from the home screen, though.
Click to expand...
Click to collapse
Confirmed
The issue with the recents menu in the 1/30 nightly is resolved in 1/31.
I'm testing 1/31 with ktoonsez 1/9 aosp kernel (last one with Samsung sources) for my Bluetooth issues.
we want cm on our g900h since samsung have released source code
Airboner said:
we want cm on our g900h since samsung have released source code
Click to expand...
Click to collapse
oh wow, you weren't kidding - they released source for all the g900* builds, it seems - even my g900t.
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=g900 in case anyone didn't know
Maybe we can get some clues for fixes to the bluetooth issues now
sylvisj said:
oh wow, you weren't kidding - they released source for all the g900* builds, it seems - even my g900t.
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=g900 in case anyone didn't know
Maybe we can get some clues for fixes to the bluetooth issues now
Click to expand...
Click to collapse
and what meaning has g900t with the question that i asked metioning on g900h ?
P.S. sry but maybe didnt get y
Latest nightly with latest kernel cpu profile ktoonservatique using dark holo theme
Airboner said:
and what meaning has g900t with the question that i asked metioning on g900h ?
P.S. sry but maybe didnt get y
Click to expand...
Click to collapse
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=g900h
They're all there. All of them.
sylvisj said:
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=g900h
They're all there. All of them.
Click to expand...
Click to collapse
i know but still cant get the reason u quoted me metioning about your model :/
anyway. as i said,since samsung have released opensource of g900h
i would like cm to develop on g900h
Airboner said:
i know but still cant get the reason u quoted me metioning about your model :/
anyway. as i said,since samsung have released opensource of g900h
i would like cm to develop on g900h
Click to expand...
Click to collapse
Not sure how that would allow them to develop for the 900H?
12-20150201-NIGHTLY-klte
Just flashed the latest nightly coming from touchwiz stock on my NZ SM-G900I.
Issue 1: NFC won't turn on, just stays grayed out when you press it.
Issue 2: WiFi connects no problem to 2.4 and 5GHz networks, but it is so ridiculously slow. Maxing 100Kb/s download, and 40Kb/s upload, but the average is a lot slower. Reboot hasn't changed the speed at all, so I'm thinking it's a radio issue. It also takes a long time to connect to any cellular network after reboots.
Issue 3: (not so much an issue) but it now shows my device model as SM-G900F in settings, but it is definitely a SM-G900I model.
GuyInDogSuit said:
Not sure how that would allow them to develop for the 900H?
Click to expand...
Click to collapse
i dont know but hope that somebody will try
Flashed 02.01. with stock kernel. No fc after reboot and reboot is not so long..
in one moment i loose mi 3G data and after 3 reboots it come back..
My is still booting slow and i have still the system process fc error.
What recovery are you using?
tinko975 said:
Flashed 02.01. with stock kernel. No fc after reboot and reboot is not so long..
in one moment i loose mi 3G data and after 3 reboots it come back..
Click to expand...
Click to collapse
1.2.2015. build with stock kernel. I'm truly impressed.
Sent from my SM-G900F
LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0.1 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
This thread is for Unofficial LineageOS 13.0 builds for klimtlte (SM-T705). The following will not be supported here:
Custom kernels
Mods
Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
First time flashing LineageOS 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Install the Google Apps addon package (Optional)
Reboot
klimtlte Builds
Google Apps:
http://opengapps.org/
Kernel
https://github.com/exynos5420/android_kernel_samsung_exynos5420
Device Tree
https://github.com/exynos5420/android_device_samsung_klimtlte
Aytex, who made all of the banners on this post.
@Barracuda77777 (For helping along the way)
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits - the base @Barracuda77777 and @nvertigo67 started of from)
@eousphoros (for his device git)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
Exynos5420 Dev Team (@deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart )
Deathly Adiutor App
Deathly Adiutor is an open-source, modified version of Kernel Adiutor made specifically for Exynos 5420 devices.
Features
Power Saving:
S-Pen Power Saving - Same as in Touchwiz, disables S-Pen detection if it's inserted in the slot
S-Pen Input Booster - Instantly increase CPU frequency when the S-Pen touches the screen
Touchscreen Input Booster - Instantly increase CPU frequency when you touch the screen
Touchkey Input Booster - Instantly increase CPU frequency when you touch the capacitive buttons
Touchscreen Glove Mode (Not all screens support this)
CPU Control:
CPU Settings reworked - Deathly adiutor back-end was cleaned up to work specifically with our CPU
CPU Thermal - Control all thermal throttling points for the CPU (make your device run colder... or even hotter)
GPU Control:
GPU Time in States - Same as CPU Time in States (Times in each frequency)
GPU Frequency Control (not yet supported on Nougat)
GPU Voltage Control (not yet supported on Nougat)
GPU Governor Control (not yet supported on Nougat)
Battery control:
Full power statistics - See current and maximum charging currents and current source of power
Unstable power source detection - Lowers current until the power source is stable
Customize charger current limits - Make your device charge faster (safe, if the charger can not supply enough current, the board will dynamically decrease the current)
Screen-On current limiter - Limit charging if screen is on (to avoid overheating)
Speakers:
Privacy mode - Disable main speaker if headphones are plugged in
Earpiece volume
Left/Right speaker volume
Speaker equalizer
Headphones:
Left/Right channel volume
Mono output mode
Headphone equalizer
App Themes:
Light theme - White and Red
Dark theme - Grey and Red
Credits
This post was written by @ZakooZ
This app is brought you by the exynos5420 developer team: @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588, @ShevT
Translators:
@ShevT - Russian
The following people deserve distinction for their major contribution:
@tincho5588, responsible for 80%+ of the code for the new features
@deadman96385, the main maintainer of the Deathly kernel and most of the remaining code
Downloads
The app can be found in the Play Store:
Free version (with ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.ads
Donator version (no ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.adfree
Helping the developers
You may have noticed there's 2 versions of this app, one ad-free for donators and one with ads.
You can help us by clicking ads you're interested in for the free version, or purchasing the donator version!
We will use the money generated by this app as common money for the developers of the team. It will be used to pay for our web-hosting (we own a gerrit server and a domain name, exynos5420.com). It will also be used to buy a new device if one of ours breaks.
Translating the App
You can also help us by translating the app to your language:
1. You can start by looking at the full english language file: Link
2. Then compare it to your unfinished language file. You can find it here, under values-xx/strings.xml, xx being your language abbreviation.
3. You can then fill-in the missing strings in your language file. Here's an example of what a proper update looks like.
4. Then you can submit your translation by using our gerrit. If you don't know how to use gerrit, just PM the translation to your favorite developer and he'll get it merged!
Bugs:
Fingerprint sensor
You tell me
is there fingerprint option to unlock the screen and please tell what is ril, because im going to flash it.
thanks and great job
Sathvik27 said:
is there fingerprint option to unlock the screen and please tell what is ril, because im going to flash it.
thanks and great job
Click to expand...
Click to collapse
simplified: ril is the hal for modems (SCNR):
https://en.m.wikipedia.org/wiki/Radio_Interface_Layer
https://en.m.wikipedia.org/wiki/Hardware_abstraction
What happens if RIL doesn't work? If camera doesn't work, can i use third party app and will camera work then?? Please help me, I'm a newbie
Sathvik27 said:
What happens if RIL doesn't work? If camera doesn't work, can i use third party app and will camera work then?? Please help me, I'm a newbie
Click to expand...
Click to collapse
About the camera, I would venture to say that what they mean by posting "camera" under the topic "Bugs", is because the hardware does not yet have a driver for the Marshmallow based software? Thus my guess is that no 3rd party app would work. I think this way because if a 3rd party camera app did work, they would have mentioned that in the OP and besides it makes no sense that a 3rd party app would work and the stock camera app not, right?
Please feel free to correct me if I am wrong.
Camera doesnt work means there is a problem when trying to link camera's hardware so all app that uses the camera (3rd party cameras, skype,etc) cant commect to the camera's hardware .
There are 2 minor issues in the latest build:
Issue #1: There is a lag with the sound. Sometimes the sound works well as it should, but most of the time there is a huge lagg when putting up volume. Some of the ui sounds play 10 seconds later. Here is a video of demonstration: https://youtu.be/qwE5JukYPHI
Issue #2: There are graphical glitches sometimes. The device os stuck on a screen and you have to wait until system ui stops and reopens. This does not happen so often, but it happens. Video of demonstration: https://youtu.be/ht-v1OWgeNg
Anyone else here who can report these issues?
Sorry for the bad video quality, but my old tablet only got a 5MP Camera to record.
If you need any logcats or specific logs, just let me know and I will help you.
Gesendet von meinem SM-T705 mit Tapatalk
I believe there is an error in the first post. It's written:
"Important information:
This thread is for Unofficial CyanogenMod 13.0 builds for klimtwifi (SM-T705)."
The SM-T705 is the LTE variant though, i.e. klimtlte.
Radio is detected in latest build and the stupid sound lagg is gone! Thank you deadman! ??
haimann95 said:
Radio is detected in latest build and the stupid sound lagg is gone! Thank you deadman!
Click to expand...
Click to collapse
Not sure how you have it working on that build currently i only have ril working on the 2/29 build because i have disabled selinux.
deadman96385 said:
Not sure how you have it working on that build currently i only have ril working on the 2/29 build because i have disabled selinux.
Click to expand...
Click to collapse
Hmm, I don't know if my ril actually works at all (I don't have a Sim), but there is progress because it detects the radio now, which it didn't in older builds.
deadman96385 said:
Not sure how you have it working on that build currently i only have ril working on the 2/29 build because i have disabled selinux.
Click to expand...
Click to collapse
It detects the SIM card, but mobile data doesn’t work. I didn’t test calls/text messages.
Thanks for the great job, deadman!
I just don't find the newer builds, could someone give me a hint/link? Or do I need to build it myself from the repo?
porarbear said:
Thanks for the great job, deadman!
I just don't find the newer builds, could someone give me a hint/link? Or do I need to build it myself from the repo?
Click to expand...
Click to collapse
Here you go: http://sean.sspencer10.com/klimtlte/
Thanks, I tried both newer ones (29/3 and 1/3) today.
My feedback:
Both are not working on my device, even after a complete Wipe:
If I flash just the ROM (and Modem before) it starts to the Screen "Starting Apps", hangs there for about 10 minutes, then the Bootscreen comes again and that stays (at least for an hour when I turned off).
When flashing the pico-version of OpenGApps right afterwards (and Wipe Dalvik/Cache) I get to see the PIN-Entrry for my SIM (so ril runs obviously), at the same time I get a message that Media has been closed (crash), the a message that System UI has been closed, then Media again an off it goes: Bootscreen forever again.
If I can provide further Information please let me know. I haven't tried a larger OpenGApp-Package, does that might help?
Edit: This problem occurs just with the build 20160229, the newer build 20160301 works, but there ril is not working again (so probably you know about the problem already).
I am using the TWRP klimtwifi recovery. Is it possible that this prevents me from installing the latest unofficial build? I get an error in TWRP telling me my tablet is klimtwifi although I know that it is a SM-T705.
And can anyone point me to a working klimtwifi TWRP recovery?
EDIT: found it under the link in post #16.
And I got now the 0307 one installed but IMEI is still unknown.
03/01 works but i still have no sim card
03/07 and 03/08 hang at the samsung screen, on a clean flash and ive tried upgrading from 03/01
NO VOLTE PLEASE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android, Reimagined.
For the best experience, view the thread on a web browser like Chromium or Firefox.
Desktop: Brilliant. Mobile: Good. Tapatalk: OK. XDA-Labs: Horrible.
Code:
YOU are doing modifications to your device.
YOU are responsible for what you do.
We are not responsible for any damages, data loss or any type of unexpected,
bad or damaging results! If you have **SERIOUS** problems with this software,
please contact the developers or maintainers. We are not liable for anything
bad that happens to your device.
Some people occasionally describe them as heroes.
Don't be stupid and bet on that though, please be responsible for what you do.
We prohibit you from overclocking to 1337 GHz, thinking that an OEM would
replace your glorious space heater etc.
We recommend you to take the advice above regardless.
halogenOS Checklist
Although no data should be lost or damaged by the flashing process,
we advise you to follow the following steps if you are coming from another rom:
Please take a full nandroid backup!
Please copy your back up to an external device.
Backing up your Internal Storage is also recommended.
When completed, please clean flash the build!
Although you usually can dirty flash halogenOS over other ROMs, considering the other
ROM has the same Android version, it is not guaranteed. In case of serious
crashes please do a clean flash.
If you get app crashes after dirty flashing over XOS 6 or another ROM, please just
clear the app data of those apps, and it should work fine then.
XOS is a new generation cutting-edge OS for Android based on Code Aurora Forum releases.
What is XOS?
halogenOS, also known as XOS is a new Android ROM which ships with the global aim to
become a modular ROM which keeps as high as potentially possible operating
performance on your mobile device while still maintaining a sufficient feature
base of nice, small and minimal features that would not be available via any
external feature base, extension, mod or plugin.
We hope you have a truly halogenified experience!
Internals of XOS
At core, the ROM is composed mainly of components from CodeAuroraForums (CAF),
featuring only extremely minor set of components from CyanogenMod (CM) which
have been added to source in order to allow for better cross-device compatibility.
Our LOVE to others
A huge thanks goes to those behind the CodeAuroraForums (CAF), the CyanogenMod
organization and all of its
contributors for the sources used in the development of the base ROM which we
started with inclusive of all the work and dedication their team puts in order to
keep us updated on the awesome contributions that they make.
We will be keen on ensuring that we be up to date with the code from our base sources,
with regular ROM updates hopefully coming from time to time.
Please do not ask for ETA's (else you shall be spooked by Mr Skeltal). Almost all of us are
students, and with the current lifestyles and routines we have, it is not that easy to acquire
time to develop the ROM, though we'll be sure to keep you updated and release OTAs as
soon as they are available and ready for publication. If you want to be really updated quick,
then join us on Telegram: http://telegram.me/halogenos
Visit our website for features such as: Downloads, Information etc.
http://halogenos.org
(Not finished yet)
Common stuff
Known issues:
None at all
The ROM is super stable as of now and we'll maintain a clean and proper ROM.
Planned features (don't ask for these!):
Button actions
Highlights:
Reworked Lockscreen Visualizer
Modern Services -> Google Assistant etc.
Substratum (OMS7)
Full media support (FFMPEG, video codecs, ...)
Great Audio quality, no distortions, no crap
Optimized many portions of the system including surfaceflinger, inputflinger, System Server, and more
Super fast boot
Superuser-capable
Great battery life
Soundmod support (not all soundmods work on Nougat, it's not our fault)
addon.d support (backups your gapps etc. when flashing new build - don't wipe system before flashing!)
init.d support
BusyBox
Super smooth
Signature Spoofing toggle (Support for MicroG)
Support for trusted third-party WebViews like Chrome
Long press on home for assist toggle
Security Patches in kernel
KCAL support
Kernel optimizations
OpenGapps (Mini/Micro/Nano recommended) and Banks GApps support
Dexpreopt for faster (first) boot time and less space consumption on data partition
Upgrade & Boot the ROM in just 5 minutes - no more endless waiting for flashing a new build
Very high compatibility with other ROMs
How to update the ROM:
Download the latest zip
Reboot into TWRP (Please use official TWRP)
Do not wipe anything
Flash the ROM
Optional : Flash GApps and/or SuperSU
Reboot
You don't need to wipe Cache/Dalvik.
You don't need to flash gapps again. There is some magic going on which keeps your GApps. Just make sure that you don't wipe system before flashing.
You don't need more than 5 minutes.
@regalstreak
@xdvs23 (actually xdevs23, but that was already taken on XDA)
@sewer56lol
@jbw716
@marpe
@dango99
@hunter_bruhh
@MSF Jarvis
@keessonnema
ROM Download Links
Download halogenOS now
ROM Sources
Can be found @ halogenOS GitHub Organisation.
Yunique's device trees are available on the halogenOS github organisation!
YU Yunique
Kernel source
Join our
Telegram group
Telegram News Channel
Telegram Off-Topic Group
Credits
CodeAurora
CyanogenMod
@CurioZuk
And everyone else who contributed and helps us!
In case you feel left out here, please contact us!
XDA:DevDB Information
halogenOS for jalebi, ROM for the Android General
Contributors
MSF Jarvis, CurioZuk
Source Code: https://github.com/halogenOS/android_device_yu_jalebi
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: CAF
Version Information
Status: Stable
Current Stable Version: 20170205
Stable Release Date: 2017-02-05
Created 2016-11-29
Last Updated 2017-06-23
VoLTE? Nope, not a chance. I prefer battery life over freebies.
Updates
Updates will be released on the halogenOS telegram channel linked in the OP. I may or may not be able to monitor the thread actively, ping me on Twitter or on Telegram for any queries if they remain unanswered here.
FAQ
Q Why you no 7.1?
A CAF will not release 7.1 as Google has discouraged OEMs to use it as well, so we need to wait. The update for 7.1.1 is just round the corner though, but again, CAF takes some time after Google's release so it may be a month or so before you get the 7.1.1 update in halogenOS.
Q August Security patch? You ****ting me right?
A Again, CAF. CAF hasn't been really proactive with merging them and merging even one month's patches is a massive pain that we'd better leave up to the more experienced people at CAF.
7.1.1 and December Security patch baby!
Nais. :cyclops:
video recording bug was fixed in cm14.1 ?? can you merge it??
just askin:cyclops:
are there any gps bugs present in cm14.1??
CurioZuk said:
Nais. :cyclops:
Click to expand...
Click to collapse
New release - halogenOS 7.0 - YU Yunique - 02/12/2016
Changelog :
* Enabled SDClang for build
* Remove YUDoze crap (Who needs Ambient display on an LCD screen anyway)
* Toggle to disable logs dropbox — Lesser read/write cycles to eMMC
* Toggle for Modern Services — Spoof Pixel XL for model to selective apps to enable Assistant and Unlimited high quality photo backups
* Toggle for Camera Shutter Sound
* Add another step to Power Notification Controls
* Improved Auto Brightness icon
* Lots of ROM source improvements
* Add build date and CAF branch to About Phone
Flashing instructions :
-- Clean Flash! SDClang will refuse to let your old data work!
-- Stock kernel is derpy, flash this kernel with the ROM otherwise it won't boot!
Download : Basketbuild
Thanks bro for great ROM.
If anybody tried this rom post some screenshots and give review
Sent from my Redmi Note 3 using XDA-Developers mobile app
dr.shahab said:
Thanks bro for great ROM.
Click to expand...
Click to collapse
give review bro.battery backup,performance compared to cm13??
Great ROM in all aspects you will love it far better then cm13 overall.
Thanks MSF Jervis bro.
New release will be coming up within a day, need to get VoLTE breakage fixed. We've merged a ton of changes into the ROM which can be checked here
Phantom kernel in the basketbuild ROM directory is caf based ?
MSF Jarvis said:
New release will be coming up within a day, need to get VoLTE breakage fixed. We've merged a ton of changes into the ROM which can be checked here
Click to expand...
Click to collapse
When I can expect new build today or tomorrow
Sent from my Redmi Note 3 using XDA-Developers mobile app
New release!
halogenOS 7.0 for YU Yunique (20161208)
Changelog
- Improvements in smoothness and responsiveness
- Camera shutter sound toggle
- Some telephony & telecommunication improvements and fixes
- Updated Masquerade for Substratum
- OMS updates
- Turn on Power Notification Controls by default
- Fix multiple APN setting items issue
- Some italian translations
- Add Bash and GNU Nano
- Remove more old-style status bar icons
- Update device info in settings
- Little clean-up
- Optimizations
- Bugfixes & improvements
- jalebi : Fixed video recording!
- jalebi : Disabled SDClang (was giving RIL issues)
Download from BasketBuild
Flashing instructions :
-- Clean Flash!
-- Stock kernel is derpy, flash this kernel with the ROM otherwise it won't boot!
Telegram groups :
-- halogenOS (or XOS, same thing) : Join Chat
@MSF Jarvis does Volte is supported by this ROM ?
sahil_anas said:
@MSF Jarvis does Volte is supported by this ROM ?
Click to expand...
Click to collapse
No I don't ship thread spam cancer with my product.
I installed your rom with phantom kernel but after that no rom can be flashed without phantom kernel and i need stock kernel zip because phantom kernel isnt stable can you please provide me a stock kernel zip please.. Without flashing phantom kernel no rom is booting up please help me how can i go back to stock and i dont have a laptop so i cant flash stock firmware right now
New release!
halogenOS for YU Yunique (20161225)
Changelog
Boost initial dex2oat speeds
Fix non-booting stock kernel
Greatly improve UI smoothness
Fix late-connecting RIL
Add more QS Tiles
Add toggle for tombstones (Developer oriented change)
Clean out unused resources from SystemUI
Fix lots of potential crashes
Increase call logs limit from 500 to 5000
Add Advanced Reboot
Double tap to sleep toggle
Add -O3 optimisation at multiple places
Add custom off-mode charging screen
Downloads : SourceForge
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
About LD
Years after the death of LiquidSmooth, Sean Hoyt (the LiquidSmooth lead dev) has returned to the ROM game with the Exynos5420 team to bring greatness to our beloved exynos5420 tablets and note 3 out of the ashes of the fallen LiquidSmooth ROM. LiquidDeathOS is super optimized for the exynos5420.
In fact right now it is so optimized that it won't even boot on non-exynos devices
LD is AOSP based and is only for Exynos devices
(it's even more optimized than cm)
Feature List:
OMS/substratum theme engine
Advanced Reboot
Network Traffic Settings
Clock Settings
Quick Pulldown
Smart Pulldown
Hardware/Software key control
Lockscreen Control
More to come!!
Important
This thread is for Official LiquidDeathOS builds for chagallwifi (SM-T800). The following will not be supported here:
Custom kernels
Mods
Xposed
What works:
Display/Brightness
Touchscreen
Audio
Wifi
Buttons/Lights
SDCard
USB Storage
Bluetooth
IR Blaster
Camera
OMS/substratum theme engine
Microphone
What doesn't work:
Home button wake
Fingerprint Reader.
Not in the list? Report below
How to install
1. Download ROM and Gapps and transfer to device
2. Boot into recovery (TWRP recommended)
3. Wipe the system, cache, data, and dalvik cache
4. Install ROM
5. Install Gapps
6. Install Root if you want
7. Reboot to system
Downloads
Chagallwifi Downloads
Contributors
@deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin @javelinanddart@tincho5588 @ShevT @DarkExistence
Device Maintainers
DarkExistence
Source code
Device Repos
Rom Source
You're maintaining 3 different roms lol
Which one do you personally use as your daily driver?
cloud1250000 said:
You're maintaining 3 different roms lol
Which one do you personally use as your daily driver?
Click to expand...
Click to collapse
At the moment, Nonelol. I switch between all three frequently for bug checking and updating. If I had to choose, it would actually be liquid death. Doesnt have the most customisation, yet, but god damn its stable lol
Okay Thanks!
I'll try this one since I'm not using the gps I guess (any plan on fixing it?)
Do I need to update my firmware to the latest one to get a stable feel?
Thank you!
How to update to Marshmallow bootloader (required for 20170323 and later builds)
Updating the bootloader is very quick and doesn't wipe data or repartition the device.
If the last Samsung ROM you had was 6.0.1 Touchwiz, you already have Marshmallow bootloader and don't need to follow these steps. (If you were on MM, and it still won't boot, follow the steps below)
1. Download the bootloader-only Odin package: T800XXU1CPK2.tar.md5
This has the latest Marshmallow bootloader (December 2016)
https://www.androidfilehost.com/?fid=457095661767146298
2. Download Odin 3.11
You can skip this if you already have a working Odin
https://www.androidfilehost.com/?fid=673368273298937183
3. Shutdown your tablet and start it up by holding Power+Home+Volume Down to enter Download Mode. Volume Down is the one right next to the power button. Really shut it down and use this key combination, if you use Advanced Restart, or go into download mode via TWRP the bootloader won't change.
4. Make sure the screen of your tablet has a green android symbol with a "Downloading..." text
5. Open Odin3_v3.11.1.exe and follow the instructions in this image:
If anything is missing, you WON'T flash bootloader successfully.
6. Click Start. Your tablet will automatically reboot back into your ROM.
7. To verify you have the new bootloader, you can run in terminal emulator "getprop ro.bootloader". It should say T800XXU1CPK2.
Thanks @ZakooZ for the post!
I'm running on pac rom (android 5.1.1)
cloud1250000 said:
I'm running on pac rom (android 5.1.1)
Click to expand...
Click to collapse
That's fine, you should be good to go. Just make sure your using the latest twrp (if not download the latest one, reboot to twrp, press installs switch to images at the bottom, choose the twrp image, select that it's a recovery image, swipe to flash and reboot to twrp again and it should be updated)
Deathly Adiutor App
Deathly Adiutor is an open-source, modified version of Kernel Adiutor made specifically for Exynos 5420 devices.
Features
Power Saving:
S-Pen Power Saving - Same as in Touchwiz, disables S-Pen detection if it's inserted in the slot
S-Pen Input Booster - Instantly increase CPU frequency when the S-Pen touches the screen
Touchscreen Input Booster - Instantly increase CPU frequency when you touch the screen
Touchkey Input Booster - Instantly increase CPU frequency when you touch the capacitive buttons
Touchscreen Glove Mode (Not all screens support this)
CPU Control:
CPU Settings reworked - Deathly adiutor back-end was cleaned up to work specifically with our CPU
CPU Thermal - Control all thermal throttling points for the CPU (make your device run colder... or even hotter)
GPU Control:
GPU Time in States - Same as CPU Time in States (Times in each frequency)
GPU Frequency Control (not yet supported on Nougat)
GPU Voltage Control (not yet supported on Nougat)
GPU Governor Control (not yet supported on Nougat)
Battery control:
Full power statistics - See current and maximum charging currents and current source of power
Unstable power source detection - Lowers current until the power source is stable
Customize charger current limits - Make your device charge faster (safe, if the charger can not supply enough current, the board will dynamically decrease the current)
Screen-On current limiter - Limit charging if screen is on (to avoid overheating)
Speakers:
Privacy mode - Disable main speaker if headphones are plugged in
Earpiece volume
Left/Right speaker volume
Speaker equalizer
Headphones:
Left/Right channel volume
Mono output mode
Headphone equalizer
App Themes:
Light theme - White and Red
Dark theme - Grey and Red
Credits
This post was written by @ZakooZ
This app is brought you by the exynos5420 developer team: @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588, @ShevT@DarkExistence
Translators:
@ShevT - Russian
The following people deserve distinction for their major contribution:
@tincho5588, responsible for 80%+ of the code for the new features
@deadman96385, the main maintainer of the Deathly kernel and most of the remaining code
Downloads
The app can be found in the Play Store:
Free version (with ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.ads
Donator version (no ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.adfree
Helping the developers
You may have noticed there's 2 versions of this app, one ad-free for donators and one with ads.
You can help us by clicking ads you're interested in for the free version, or purchasing the donator version!
We will use the money generated by this app as common money for the developers of the team. It will be used to pay for our web-hosting (we own a gerrit server and a domain name, exynos5420.com). It will also be used to buy a new device if one of ours breaks.
Translating the App
You can also help us by translating the app to your language:
1. You can start by looking at the full english language file: Link
2. Then compare it to your unfinished language file. You can find it here, under values-xx/strings.xml, xx being your language abbreviation.
3. You can then fill-in the missing strings in your language file. Here's an example of what a proper update looks like.
4. Then you can submit your translation by using our gerrit. If you don't know how to use gerrit, just PM the translation to your favorite developer and he'll get it merged!
Any t807t news? The majority of us US guys are chomping at the bit for some Nougat love.
Is it normal that the background is dirty unicorn ?
Btw,. Its really Working well!
Edit : fingerprint is not working
My last rom RRN > full wipe > install rom LD & gapps & su
Home button wake work normal
Thx for this great rom
Great work thx again
unfortunately this rom doesn't exist privacy guard like RR N & LineageOs
(Sorry for my bad english)
I just wondered, is it planned to enable the fingerprint scanner ? I think it should have a good reason, because it's disabled in all the 7.1.1 Roms :good:
It's not a request but just if we can expect to get it working a future release thanks @DarkExistence for your hard work (wow 3 roms :silly: !)
how can i disable back and recent button like Resurrection remix
The ROM is a brand new ROM and is still WIP. The feature set isn't as big as what RR or Lineage have yet, but it is a lot smoother and a lot more optimised for exynos devices so it won't lag as much and there will be less crashes.
Fingerprint reader is disabled for certain reasons, it will get re enabled eventually but we need to work on it first
cloud1250000 said:
Is it normal that the background is dirty unicorn ?
Btw,. Its really Working well!
Edit : fingerprint is not working
Click to expand...
Click to collapse
Yes that's normal, it's based off AOSP . Default wallpaper will change in future updates . Still WIP.
I told you it was super smooth
Wonderful Rom! I always prefer AOSP so this version is my favourite one. Very very smooth, and really good performances! Waiting for gps and fingerprints. Thank you very much Dark Existence!
Eboshi Moriyama said:
Wonderful Rom! I always prefer AOSP so this version is my favourite one. Very very smooth, and really good performances! Waiting for gps and fingerprints. Thank you very much Dark Existence!
Click to expand...
Click to collapse
Your very welcome! The team I work with are great and have put a lot of effort into getting this up and running so glad you like it.
DarkExistence said:
Yes that's normal, it's based off AOSP DU . Default wallpaper will change in future updates . Still WIP.
I told you it was super smooth
Click to expand...
Click to collapse
Just want to clarify, LDO is not based off of du, rather we are AOSP based, we simply used du as a reference, and they happen to have an amazing wallpaper, so we decided to use it until we make our own wall
abushami said:
Great work thx again
unfortunately this rom doesn't exist privacy guard like RR N & LineageOs
(Sorry for my bad english)
Click to expand...
Click to collapse
It has app ops instead of privacy guard, this is slimmer, and allows for greater control of permissions for system apps, it's in settings/security
Edit, just moved it to the main settings https://review.exynos5420.com/2117
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Project Elixir for the Xiaomi Mi Note 10 Lite [toco]
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
"This is a user-friendly thread, all your suggestions, and proper bug reports are important to us but don't be disrespectful to anyone here. Your suggestions and proper bug reports will be taken into consideration.."
Project Elixir is another aftermarket AOSP ROM which basically offers minimal UI enhancement & close to Stock Android ROM with great performance, security and stability. Most of the OEMs' these days will provide slow and untimely updates, but we don't do that here. We closely follow Google to bring the latest updates to our users, and even prolong support for devices that have been declared obsolete by OEMs. Our ROMs' source code is open-source, secure, stable, and outstanding. Your experience while using Project Elixir will be butter smooth without compromising the quality of the Android experience. In short, it's perfectly balanced between Great Performance, Security, stability, minimal UI & awesome features including pixel goodies So do not hesitate anymore, join us now and start enjoying the beauty of stock Android. Download and enjoy Project Elixir on your respective devices!
- Saurav - Founder / lead Developer
- Nishant - Co-lead Developer / Team
- Probir - Developer / Team
- Mayur - Developer / Team
- And Also Our Hardworking Maintainers
// Checkout the latest changes you get //
Spoiler: Click Here to see
Latest Changelog: https://projectelixiros.com/changelog
NOTE : In Project Elixir you get all the useful features and with updating source every month it's hard to keep all the threads updated everytime everywhere so kindly visit our website for latest changes and screenshots.
// A screenshot is worth of thousand words //
Spoiler: Click Here to see
Latest Screenshots : https://projectelixiros.com/gallery
NOTE : In Project Elixir you get all the useful features and with updating source every month it's hard to keep all the threads updated everytime everywhere so kindly visit our website for latest changes and screenshots.
--------- > OFFICIAL Download Server < ---------
NOTE: Please keep in mind that these are Gapps Builds and there is no vanilla build of this rom available.
--------- > Visit Our OFFICIAL Website < ---------
NOTE: It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine. If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
CLEAN FLASH (Moving From A12 to A13)
- Download the latest build
- Take a backup for safe side
- Boot to Recovery
- Format Data by typing yes
- Flash the latest build
- Reboot
What works?
Wifi | RIL | Mobile data | GPS | Camera
Flashlight | Camcorder | Bluetooth | Fingerprint reader | Lights | Sound | vibration
Almost everything
What doesn't work? or Any Bug ?
You tell me!
BUG REPORT !!
As soon as the problem occurs, take a logcat and please inform us via Telegram or XDA.
for more READ THIS
- Android Open-Source Project
- Pixel Experience
- LineageOS
- Proton AOSP
- Arrow OS
XDA Banner and Template Credit goes to Amaan
- Others, I may have forgot to mention
- Android OS version: 13.0
- Security patch: October 2022
- Build author/Device Maintainer : @AndroidHQ254
- DEVICE: Xiaomi Mi Note 10 Lite
- DEVICE CODENAME: toco
---- Sources and Documentation ----
-- ROM Source Code --
-- Kernel Source --
-- Documentation & Maintainership --
-- OFFICIAL Website and Telegram Support --
-- Visit our OFFICIAL Website --
-- Device Update Telegram Channel --
-- Support/Discussion Telegram Group --
// Giving a little can HELP a lot //
- As you know build is free but building ROM needs server and in order to maintain the source, we need High-End Servers that are generally very expensive and need to be renewed every single month and as a student its quite difficult. To meet with our technical expenses, a cup of coffee, and the efforts of the developers we need your monetary support!
- Do consider donating or buying me a coffee on Paypal or join us on Patreon for sustainable support and rewards if you want to appreciate our work.
- Thank you for your support !
Nice
i don't know if this is a bug, but under screen fingerprint reader does not work when the screen is off
everything works so well, this rom is much better than miui hahaha, awesome work!
Hi to all. Are the banking apps works normally ?
Or do we need any hacks for security checks ?
Thanks
John Crush said:
everything works so well, this rom is much better than miui hahaha, awesome work!
Click to expand...
Click to collapse
Hi. What recovery did you use to flash this ROM please ?
Ps: I'm from stock Miui 13.02
teknocorse said:
Hi. What recovery did you use to flash this ROM please ?
Ps: I'm from stock Miui 13.02
Click to expand...
Click to collapse
Hi, I followed the installation guide on the official website:
Project Elixir
projectelixiros.com
So I used this twrp version:
[RECOVERY][3.6.2_12][TOCO][UNOFFICIAL] Stable TWRP for Android 13 AOSP Roms
Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our...
forum.xda-developers.com
And I installed the "MIUI V13.0.2.0 Firmware" in the global version, even though my phone is from Europe
John Crush said:
Hi, I followed the installation guide on the official website:
Project Elixir
projectelixiros.com
So I used this twrp version:
[RECOVERY][3.6.2_12][TOCO][UNOFFICIAL] Stable TWRP for Android 13 AOSP Roms
Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our...
forum.xda-developers.com
And I installed the "MIUI V13.0.2.0 Firmware" in the global version, even though my phone is from Europe
Click to expand...
Click to collapse
Thank you !
John Crush said:
everything works so well, this rom is much better than miui hahaha, awesome work!
Click to expand...
Click to collapse
Thanks. Glad you are enjoying
teknocorse said:
Hi to all. Are the banking apps works normally ?
Or do we need any hacks for security checks ?
Thanks
Click to expand...
Click to collapse
SafetyNet passes out of the box without root
i flash it i follow procedure but keep on rebooting and back to recovery mode
Hey, I installed this ROM with TWRP but the camera app doesn't work. Am i doing something wrong? I installed by clean flash method.
lucy42 said:
Hey, I installed this ROM with TWRP but the camera app doesn't work. Am i doing something wrong? I installed by clean flash method.
Click to expand...
Click to collapse
In addition, only the native camera app crashes. Like, if i open the google lens app camera actually opens. But, the native camera app comes with the ROM crashes. @AndroidHQ254
lucy42 said:
In addition, only the native camera app crashes. Like, if i open the google lens app camera actually opens. But, the native camera app comes with the ROM crashes. @AndroidHQ254
Click to expand...
Click to collapse
I ported the BSG's GCam 8.1 with the config files designated to Mi Note 10 Lite and fixed this problem.
lucy42 said:
I ported the BSG's GCam 8.1 with the config files designated to Mi Note 10 Lite and fixed this problem.
Click to expand...
Click to collapse
extremely confusing... where to get the configs? and which file to download exactly? im given like 6 different options and none seem intuitive.
"
Download:
MGC_8.1.101_A9_GV2b_snap.apk (org.codeaurora.snapcam) #
MGC_8.1.101_A9_GV2b_MGC.apk (com.android.mgc) #
MGC_8.1.101_A9_GV2b_ENG.apk (com.google.android.GoogleCameraEng) #
MGC_8.1.101_A9_GV2b_ruler.apk (com.samsung.android.ruler) #
MGC_8.1.101_A9_GV2b_scan3d.apk (com.samsung.android.scan3d) #
MGC_8.1.101_A9_GV2b_qcamera3.apk (org.codeaurora.qcamera3) #"
EDIT ok i got help here - any of these are fine, except the ones for Samsung, as they are esentially the same thing.
Fingerprint scanner doesnt work when in sleep, doesnt wake phone. need to hit power button then scan finger.
also, wifi button doesnt seem to toggle in the quick drop down menu. Visually.
Edit - wifi button works, just had to reboot system. maybe phone brain fart.
Any plans for a vanilla build at some point?
Idaho1911 said:
Any plans for a vanilla build at some point?
Click to expand...
Click to collapse
no
eishey said:
i flash it i follow procedure but keep on rebooting and back to recovery mode
Click to expand...
Click to collapse
Ensure you use the recommended Android 13 recoveries
maxlieb said:
Double tap to wake does not work after ~5 seconds after screen off (after the always on display dims down)
* Might be related to a broken screen replacement.
* I DID verify that the problem is a software problem - flashed xiaomi.eu rom and it DOES work there.
* I'm NOT at all sure it worked even with original screen (screen was fully functional, just a few cracks in the glass)
Update:
Tried derpfest and project elixir, same problem.
also found this on pixel-experience github issue tracker...
exactly the same issue - AOD becomes too dim and tap to wake stops working.
seems it's a known problem.
Click to expand...
Click to collapse
Quoting myself from the thread for Evolution rom... same problem with Elixir and DerpFest.