Related
It is as follows:
I installed a rom where the mobile phone at the end of the installation not started already, was stuck on the logo of Huawei.
So I downloaded a stock rom (after extracting and so) put the dload folder on the SD card, as is done ....
So when I went to the pink screen to start the update, I connected to the pc normally and nothing ...! Just keep in pink screen!
I suspect it's a driver on the pc, but I can not see ....
The drivers 'android updater' do not install!
It was supposed (i3.ytimg.com/vi/Nu1TYdJdv18/maxresdefault.jpg) happen, but not!
Help please! :crying:
are you sure you have right files? you must have a dload folder on ROOT of sd card.
try redownloading from here: http://www.mediafire.com/download/c97gnolbh9759y7/dload.zip
this is where i download every time i flash stock rom
If you are using forumber's partition, you have to return to stock partition
Hello
I have a similar problem.
I was trying to install [ROM] [4.2.2] [Version 12] CyanogenMod 10.1 with this instruction:
Installation:
Use only Forumember partition.zip.
1. Copy package to SD card
2. Boot to recovery
3. Full wipe (data, cache, dalvik,)
4. Format /system, /data, /cache
5. Reboot recovery
6. Install pacakges
7. Reboot!
But installation was not completed.
Now I can't enter to RECOVERY (power on + vol not works).
What I should to do? Return to stock partition? Help please
digit4l_pl4yer said:
Hello
I have a similar problem.
I was trying to install [ROM] [4.2.2] [Version 12] CyanogenMod 10.1 with this instruction:
Installation:
Use only Forumember partition.zip.
1. Copy package to SD card
2. Boot to recovery
3. Full wipe (data, cache, dalvik,)
4. Format /system, /data, /cache
5. Reboot recovery
6. Install pacakges
7. Reboot!
But installation was not completed.
Now I can't enter to RECOVERY (power on + vol not works).
What I should to do? Return to stock partition? Help please
Click to expand...
Click to collapse
The instructions are not correct there. Please tell what happened when you were flashing the partition.zip?
after that I installed original HUAWEI U8800 Android 2.3 for beta.
Now I have only HUAWEII logo ;(
I have the correct dload, but the drivers on my pc are not well when connectin during pink screen...
There is the img of drivers and i can't find them anywere!
Was suppose to, during pink screen, plug the phone to pc and the update just start, but nothing! The pink screen stills there and no update
pl4t!n said:
If you are using forumber's partition, you have to return to stock partition
Click to expand...
Click to collapse
But i can't go to the CWM, just pink screen and Huawei's logo stuck
Miguel510 said:
But i can't go to the CWM, just pink screen and Huawei's logo stuck
Click to expand...
Click to collapse
OK. Get a clean sdcard, or format your current one (backup your data first), and put the dload folder onto your sdcard. Now, remove the battery from the phone and insert the sdcard with the dload folder into your phone. Connect your phone's cable to your phone, and the USB end into a computer. It should start installing the firmware in your dload folder. Report your results please.
rqmok said:
OK. Get a clean sdcard, or format your current one (backup your data first), and put the dload folder onto your sdcard. Now, remove the battery from the phone and insert the sdcard with the dload folder into your phone. Connect your phone's cable to your phone, and the USB end into a computer. It should start installing the firmware in your dload folder. Report your results please.
Click to expand...
Click to collapse
When i try it just can't...
When going to pink screen and plugin the USB, the PC just can't install the drivers it says that are with errors and the drivers are missing as you can see in picture the i uploaded.
Just can go to pink screen, when going to CWM the phone stucks in Huawei's logo.
When in pink screen, the update just didn't start, even when plug the device to the PC and even doing what you said...
I think my problems are drivers!
I have Windows 7 - 64bits
And see the pics i uploaded....
rqmok said:
OK. Get a clean sdcard, or format your current one (backup your data first), and put the dload folder onto your sdcard. Now, remove the battery from the phone and insert the sdcard with the dload folder into your phone. Connect your phone's cable to your phone, and the USB end into a computer. It should start installing the firmware in your dload folder. Report your results please.
Click to expand...
Click to collapse
I use this solution, and now I have:
Phone starts in recovery <3e>
What I should do? Help please.
digit4l_pl4yer said:
I use this solution, and now I have:
Phone starts in recovery <3e>
What I should do? Help please.
Click to expand...
Click to collapse
Change the recovery image...
Root and change recovery image.
Didn't work with me!!!!
*see, gmationL
Thx for info. Where I can find this solution?(step by step)
Miguel510 said:
When i try it just can't...
When going to pink screen and plugin the USB, the PC just can't install the drivers it says that are with errors and the drivers are missing as you can see in picture the i uploaded.
Just can go to pink screen, when going to CWM the phone stucks in Huawei's logo.
When in pink screen, the update just didn't start, even when plug the device to the PC and even doing what you said...
I think my problems are drivers!
Click to expand...
Click to collapse
It should have started updating automatically. Please check that on the root of your sdcard you have dload folder, and inside the dload folder you have UPDATE.APP. If that's already there, it could be that the sdcard is not able to mount.
---------- Post added at 02:27 AM ---------- Previous post was at 02:21 AM ----------
digit4l_pl4yer said:
Thx for info. Where I can find this solution?(step by step)
Click to expand...
Click to collapse
If you are able to go to pink screen then try installing official android 2.3
Thanks for answer.
After installing and rebooting on screen was info:
(logo recovery) formatting cache/ formatting data
Now I have only HUAWEI logo
Maybe problem is in forumber's partition?
How can I back to stock partition?
digit4l_pl4yer said:
Thanks for answer.
After installing and rebooting on screen was info:
(logo recovery) formatting cache/ formatting data
Now I have only HUAWEI logo
Maybe problem is in forumber's partition?
How can I back to stock partition?
Click to expand...
Click to collapse
You can only flash the stock-partition.zip with a custom recovery. I think you need to try to mount the pink screen on your computer and install the custom recovery from there.
When I connect phone (in pink mode) to the computer I have:
I install Huawei_U8800_ICS_ADB_Driver_(MTP) but still not works
digit4l_pl4yer said:
When I connect phone (in pink mode) to the computer I have:
I install Huawei_U8800_ICS_ADB_Driver_(MTP) but still not works
Click to expand...
Click to collapse
Did you try updating the drivers through windows update or something?
The windows auto-update sucks,can't install the drivers oe update them, just says ''you already have the best drivers''...
Maybe the SD Card is unable to mount as you say, if so, can i use a different card or no solution?
Ok, so I flashed cleanrom ex, and on reboot I got a security error.
I tried to get to recovery, but it wipes data and immediately reboots.
I've tried flashing the stock rom, but lg flash tool tells me it's the wrong device (now thinks it's a D802).
I've been trying to get into TWRP on scrosler and samsunggalaxystig's advice, first by repeatedly trying an adb reboot recovery, then by writing a batch script to do it repeatedly in order to catch it before it reboots.
Problem is, I don't know if I had already had ADB drivers installed on this computer for the G2 (had rooted while at work), and despite installing them more than once, I don't think the device actually has enough time to be recognized as I still have an unrecognized "g2" in device manager while TWRP is wiping.
Any ideas? Is there any way I can force the install of the ADB driver without having it connected for more than 20 seconds? Spitballing... would it be possible to actually flash a D802 image so I could then root, change the build.prop to D800, and then flash the D800 image?
Totally at a loss at this point.
did you solve your problem? i have a similar problem and i just bricked an s3. this g2 is brand new and now it's bricked too! if you have found a solution please respond... :crying:
kureta said:
did you solve your problem? i have a similar problem and i just bricked an s3. this g2 is brand new and now it's bricked too! if you have found a solution please respond... :crying:
Click to expand...
Click to collapse
No problem if you brick a sammy phone. its easy to flash stock rom. How did you brick your g2?
---------- Post added at 08:13 PM ---------- Previous post was at 08:11 PM ----------
lastdeadmouse said:
Ok, so I flashed cleanrom ex, and on reboot I got a security error.
I tried to get to recovery, but it wipes data and immediately reboots.
I've tried flashing the stock rom, but lg flash tool tells me it's the wrong device (now thinks it's a D802).
Totally at a loss at this point.
Click to expand...
Click to collapse
Why did flashing a rom leads you to that error? Sorry but not familiar with your roms but is this rom really for your LG G2 model?
lastdeadmouse said:
Ok, so I flashed cleanrom ex, and on reboot I got a security error.
I tried to get to recovery, but it wipes data and immediately reboots.
I've tried flashing the stock rom, but lg flash tool tells me it's the wrong device (now thinks it's a D802).
I've been trying to get into TWRP on scrosler and samsunggalaxystig's advice, first by repeatedly trying an adb reboot recovery, then by writing a batch script to do it repeatedly in order to catch it before it reboots.
Problem is, I don't know if I had already had ADB drivers installed on this computer for the G2 (had rooted while at work), and despite installing them more than once, I don't think the device actually has enough time to be recognized as I still have an unrecognized "g2" in device manager while TWRP is wiping.
Any ideas? Is there any way I can force the install of the ADB driver without having it connected for more than 20 seconds? Spitballing... would it be possible to actually flash a D802 image so I could then root, change the build.prop to D800, and then flash the D800 image?
Totally at a loss at this point.
Click to expand...
Click to collapse
Hey I'm in the exact same position as you... did you manage to figure out a way to get into recovery?
kureta said:
did you solve your problem? i have a similar problem and i just bricked an s3. this g2 is brand new and now it's bricked too! if you have found a solution please respond... :crying:
Click to expand...
Click to collapse
twrp corrupted my cache partition and the phone could not boot. i tried to flash cwm while in twrp and i guess i messed up recovery and/or boot partitions. al i could get was fastboot. i flashed a boot.img i got from somewhere in here. now it says security error and it does not boot. it does not enter into fasboot. i can enter into recovery mode but it is the stock lg recovery and if i choose "delete all data", which is the only option, it gives an error and restarts.
if i try to flash stock firmware as described in this post it stops at 49%.
kureta said:
twrp corrupted my cache partition and the phone could not boot. i tried to flash cwm while in twrp and i guess i messed up recovery and/or boot partitions. al i could get was fastboot. i flashed a boot.img i got from somewhere in here. now it says security error and it does not boot. it does not enter into fasboot. i can enter into recovery mode but it is the stock lg recovery and if i choose "delete all data", which is the only option, it gives an error and restarts.
if i try to flash stock firmware as described in this post it stops at 49%.
Click to expand...
Click to collapse
I am on the same boat, same problem, and don't know what else to do...hope someone could help us out.
Yep me to same issue. Pretty much tried 6 different methods and still stuck
Solution
IF you still have guys this issue i have solusion for you .
This happened to me yesterday too
1. Download ADB drivers for LG G2 LINK
2. Download LG Mobile Support Tool you can find this here LINK
3. HOLD VOLUMEUP + POWER button to enter the download mode and connect your device to pc
4. Run LG Mobile Support Tool ( if your device vas found click settings select upgrade firmware this will download for you 1.9 GB STOCK FIRMWARE
5. Enjoy your mobile
Any luck anyone? I can't get the suggestion in the last post to work because my phone just goes from the LG Logo to Security Error. I can't get to download mode. Or recovery. Or get ABD to see it.
Odd
quatrix1 said:
IF you still have guys this issue i have solusion for you .
This happened to me yesterday too
1. Download ADB drivers for LG G2 LINK
2. Download LG Mobile Support Tool you can find this here LINK
3. HOLD VOLUMEUP + POWER button to enter the download mode and connect your device to pc
4. Run LG Mobile Support Tool ( if your device vas found click settings select upgrade firmware this will download for you 1.9 GB STOCK FIRMWARE
5. Enjoy your mobile
Click to expand...
Click to collapse
i have to choose upgrade recovery and it gets past analyzing then doesnt show a bar for downloading software...
HELP!!!!!!!!!!!!!!!!!!!!!
Can someone help me I successful in installing twrp though autorec apk and the same for rooting my g2. I flashed cm with nightlies and noticed that twrp had a update. I downloaded the zip and try flashing it like flash a recovery in flashify but that din't work and readed that zip flashing though twrp didn't work but renumber this video and though it would update my recovery to 2.7.1 but it was successful in doing so but when I got to recovery it was 2.7.0. That not the problem form there I tried to boot into my system. Then it turn off though that I passed power off instead but when turn my g2 back on I found that I had a security error show up then turn back off. So can someone help show me a tutorial on unbick or a way to remove error. Also I have the d800 and i have some idea without going though unbicking a hard factory rest or flasing twrp form there site in fastboot. Finally that lg mobile support tool say that im up to date. I think doing the autorec twrp recovery locked as my phones recovery like trying to flash a rom with a locked bootloader.
Ok guys i trying to help cause it happen to me too,sorry for my english too slow but i try,when you try go twrp with volume up+power buttom it still show security errow,that ok your device not hardbrick yet,when you try volume down+power buttom it show hard reset it does mean it clear all rom,picture in internal but it go to twrp again,and them just flash another rom in your device and it done,have great day piece
I had the same problem on my G2 was using twrp to flash cyanogenmod not sure what i did and phone rebooted to show security error message. I entered recovery mode (power and volume down release when logo pops up and press power and volume down again hold for a second then tap both buttons a few times) pulled up the option to factory reset so i did and it booted me into twrp and allowed me to flash cyanogenmod correctly this time and the phone started back up with no problems. hope this can help someone else as well.
Anybody know the solution?
I also have the security error boot loop after flashing KK baseband files... I tried to enter recovery mode by holding vol down & power button but it wont work...
it does work when i enter download mode (vol up + power button), but i don't want to have to download the stock LG ROM..
anybody know how to by pass the security error boot loop to allow me to reflash?
kureta said:
did you solve your problem? i have a similar problem and i just bricked an s3. this g2 is brand new and now it's bricked too! if you have found a solution please respond... :crying:
Click to expand...
Click to collapse
if you still bricked. try this
get your tools from here: http://forum.xda-developers.com/showthread.php?t=2432476
keep reading or follow above thread. both will work.
best of luck.
After all the drivers installed correctly
make sure your phone is connected to the
com41 port change it if it already not ( Under device manager > Go to Ports (COM & LPT). You should see LGE AndroidNet etc... Right click it and go to Properties > Port Settings > Advanced > Change COM Port Number to COM41 > OK > OK > Close Device Manager )
run flash tool
1. choose type CDMA
2. chose PhoneMode: DIAG
leave rest as it is.
3. choose your kdz file.
then go to download mode
1. power off
2. press and hold vol + key and plug usb cable
3. done )
We have go 2 flashing modes.
1. Normal Flash is for flash with keeping data
2. CSE flash is totally new start preffered.
hope this helps.
thanks but it was a long time ago and I further messed up things, ended up sending it for warranty. they have replaced the device.
me too messed up my cell 1st i was on cloudy g2 v2.1 installed cm11 nightlies but the camera was not so good so then installed cloudy g2 v2.1 n since then i was having problem regarding sound during call and also some hard noise like siren starts randomly, i searched alot but didnt got any solution. wiped all many times (including internal storage ). but no luck then i thought i might be baseband error so i just downloaded auto recovery n flashed it n then stuck into security error but thank GOD i had custom rom in my sd card that time i flashed it back but still em having the sound error.
lastdeadmouse said:
Ok, so I flashed cleanrom ex, and on reboot I got a security error.
I tried to get to recovery, but it wipes data and immediately reboots.
I've tried flashing the stock rom, but lg flash tool tells me it's the wrong device (now thinks it's a D802).
I've been trying to get into TWRP on scrosler and samsunggalaxystig's advice, first by repeatedly trying an adb reboot recovery, then by writing a batch script to do it repeatedly in order to catch it before it reboots.
Problem is, I don't know if I had already had ADB drivers installed on this computer for the G2 (had rooted while at work), and despite installing them more than once, I don't think the device actually has enough time to be recognized as I still have an unrecognized "g2" in device manager while TWRP is wiping.
Any ideas? Is there any way I can force the install of the ADB driver without having it connected for more than 20 seconds? Spitballing... would it be possible to actually flash a D802 image so I could then root, change the build.prop to D800, and then flash the D800 image?
Totally at a loss at this point.
Click to expand...
Click to collapse
kureta said:
did you solve your problem? i have a similar problem and i just bricked an s3. this g2 is brand new and now it's bricked too! if you have found a solution please respond... :crying:
Click to expand...
Click to collapse
k2thejx5 said:
Yep me to same issue. Pretty much tried 6 different methods and still stuck
Click to expand...
Click to collapse
Hey guys, I was in the same boat for a little but was able to fix it by downloading the 801C firmware and flashing it. The firmware file should be a KDZ extension and you should also download LG Flash Tool 2014. Turn the phone on by holding the Power button and Volum up while it is plugged into your computer(It has to be plugged into a computer with LG phone drivers or it won't work).
Follow this tutorial and you will be set.
http://www.droidviews.com/how-to-restore-lg-g2-to-stock-firmware/
Start at step 17 on Method 1 and you should be golden.
Hope this helps guys!
Hi, I've tried to install Android 4.1.2 on my LG E610 L5. The rom I chose was 20d + root + cwm. It worked just fine, but I've accidentally let it update itself, not knowing you should do that on rooted devices. Not whenever I turn on the phone it shows me cwm recovery menu. Rebooting doesn't work and I can't get into stock recovery mode. I've tried hard reset, clearing cash and data, flashing another rom, nothing works. Is there anything I can do other than giving it to service and paying for getting it fixed? Cwm version is 6.0.2.8, I can link to specific download link if that made a difference.
Chmis said:
Hi, I've tried to install Android 4.1.2 on my LG E610 L5. The rom I chose was 20d + root + cwm. It worked just fine, but I've accidentally let it update itself, not knowing you should do that on rooted devices. Not whenever I turn on the phone it shows me cwm recovery menu. Rebooting doesn't work and I can't get into stock recovery mode. I've tried hard reset, clearing cash and data, flashing another rom, nothing works. Is there anything I can do other than giving it to service and paying for getting it fixed? Cwm version is 6.0.2.8, I can link to specific download link if that made a difference.
Click to expand...
Click to collapse
i personally have a l7, to it seems like the only thing you can possibly do is use KDZ updater try doing some research on it fr your phone.
MooSeKilla said:
i personally have a l7, to it seems like the only thing you can possibly do is use KDZ updater try doing some research on it fr your phone.
Click to expand...
Click to collapse
I'd try that, but KDZ won't detect my phone. I can't boot up the system and there's no download mode in cwm. Is there any way to flash stock recovery using cwm?
I basically need anything that would make my phone show up and be detected by kdz. May be rom or different recovery.
Chmis said:
I'd try that, but KDZ won't detect my phone. I can't boot up the system and there's no download mode in cwm. Is there any way to flash stock recovery using cwm?
I basically need anything that would make my phone show up and be detected by kdz. May be rom or different recovery.
Click to expand...
Click to collapse
okay first of all you need to go to google and find the right driver for your phone
next take the battery out of your phone and then plug it in to your computer while holding the volume up buttons
next go to your computers drivers via ( Start->right click on computer and go to properties->then go to hardware then drivers-> look for something called modem and if your phone is under it then disable it)
next open the KDZ updtaer
install that mx thing
then open KDZ updater set it to 3GQCT and EMERGENCY
then select your KDZ updater
launch update
it may say errors but let it finish.
Phone's display shows LG logo. Left for an hour, nothing happened. If I try to do KDZ update, it says "PHONE WAS NOT FOUND! "
Help
Chmis said:
Phone's display shows LG logo. Left for an hour, nothing happened. If I try to do KDZ update, it says "PHONE WAS NOT FOUND! "
Click to expand...
Click to collapse
So if You have CWM, turn your phone off, take your Memory card, put it in adapter microSD -> SD , put it in card reader, copy to your card some working ROM you like,, then put Your card again in phone, place battery in,
Then Turn on Your phone , and make it to CWM boot, then do as is:
Start CWM recovery
Wipe data / factory reset
Wipe Cache
Advanced / wipe Dalvik cache / yes
Mounts and storage
Mount system
format / system
install zip from sdcard
choose zip from sdcard external
Select soft from memory card
Yes
Then reboot Your phone and It should works fine.
seem you got cwm bootloop, try using fast boot to flash stock recovery
milo24com said:
So if You have CWM, turn your phone off, take your Memory card, put it in adapter microSD -> SD , put it in card reader, copy to your card some working ROM you like,, then put Your card again in phone, place battery in,
Then Turn on Your phone , and make it to CWM boot, then do as is:
Start CWM recovery
Wipe data / factory reset
Wipe Cache
Advanced / wipe Dalvik cache / yes
Mounts and storage
Mount system
format / system
install zip from sdcard
choose zip from sdcard external
Select soft from memory card
Yes
Then reboot Your phone and It should works fine.
Click to expand...
Click to collapse
Unfortunatelly, it doesn't. I've tried many similar solutions already.
kien_vip said:
seem you got cwm bootloop, try using fast boot to flash stock recovery
Click to expand...
Click to collapse
How can I get into fastboot mode? None of the "press volume button and power for 30 seconds" methods work. @edit From what I've read, LG L5 doesn't have fastboot. Damn it.
Did you tried to remove the battery and enter emergency mode ?
Sent from my HTC Desire S using xda app-developers app
OK, so that's really interesting. I've connected the phone to the PC, uninstalled drivers and let Windows Update install it's own. Doing so, instead of being stuck on LG logo, I was now in fastboot mode, despite being said LG L5 doesn't have fastboot. Anyways, I've flashed stock recovery.img I've found here: http://forum.xda-developers.com/showpost.php?p=37363473&postcount=1023. Using Vol- and power button I put it in download mode and managed to install clean soft from official LG website with KDZ. I'm not really sure how it worked, but it did.
Chmis said:
OK, so that's really interesting. I've connected the phone to the PC, uninstalled drivers and let Windows Update install it's own. Doing so, instead of being stuck on LG logo, I was now in fastboot mode, despite being said LG L5 doesn't have fastboot. Anyways, I've flashed stock recovery.img I've found here: http://forum.xda-developers.com/showpost.php?p=37363473&postcount=1023. Using Vol- and power button I put it in download mode and managed to install clean soft from official LG website with KDZ. I'm not really sure how it worked, but it did.
Click to expand...
Click to collapse
great job
help
i had the same problem now i flashed stock recovery but it keeps rebooting to a white screen i cant even acces fastboot now
wouterdekabouter said:
i had the same problem now i flashed stock recovery but it keeps rebooting to a white screen i cant even acces fastboot now
Click to expand...
Click to collapse
Did you try to flash boot.img (fastboot flash boot boot.img) the file is in the zip file of the ROM.
Sent from my Desire S using XDA Free mobile app
mugen_dz said:
Did you try to flash boot.img (fastboot flash boot boot.img) the file is in the zip file of the ROM.
Sent from my Desire S using XDA Free mobile app
Click to expand...
Click to collapse
I don't know what i did but after a week i tried to boot it and it booted up so its working now
Ok every one iv posted a simulare problem a month ago, when you use kdz, and it flashes stock, if after the flashing it stays in a boot loop all you need to do is leave the phone on boot with the lg logo for 10 mins.
After that unplug your phone, put the battery back in.
Now all you need to do is a factory reset, press and hold Vol down + menu, press power after the phone vibritas let go of the power button and keep holdind Vol down + menu for 10 seconds.
The phone will factory reset and boot up normaly.
This works on all versions of L3/L5/L7
Sent from my LG-P705 using XDA Free mobile app
Nesh89 said:
Ok every one iv posted a simulare problem a month ago, when you use kdz, and it flashes stock, if after the flashing it stays in a boot loop all you need to do is leave the phone on boot with the lg logo for 10 mins.
After that unplug your phone, put the battery back in.
Now all you need to do is a factory reset, press and hold Vol down + menu, press power after the phone vibritas let go of the power button and keep holdind Vol down + menu for 10 seconds.
The phone will factory reset and boot up normaly.
This works on all versions of L3/L5/L7
Sent from my LG-P705 using XDA Free mobile app
Click to expand...
Click to collapse
but when i do so after the kdz update the phone boots automatically in cwm, so i cant let the phone do what it does during the logo display for 10 minutes. I have an l7
I had no idea what I was doing back then, so I haven't tried a simple solution, but you can try flashing a ROM. The fact you boot straight into recovery is a sign of no/corrupt system, so flashing a different one may fix it. Pick one from Original Development and follow the instructions.
Hey,
Very strange query but here goes. Rooted phone a while back and installed CM13 along with recovery. Was trying to update TWRP{ by downloading .img from their website, went to flashing, selected the file and hit recovery. Said it was succesful so attempted to reboot. Plugged in to charge and was charging but when I tried to switch it on, it was stuck in Cyanogen Bootloop (blue alien stayed on the screen for 10+ minutes). Tried rebooting to recovery by hitting power + volume down and instead of booting to TWRP, it takes me to a Cyanogen recovery screen where I see the following options:
Cyanogen Recovery.
- Reboot system now
- Apply update
- - -apply from ADB
- - -choose from emulated
- Factory reset
- - -system reset
- - -full factory reset
- - -wipe cache
- Advanced
- - -reboot recovery
- - -reboot to bootloader
- - -Wipe system partition
- - -view recovery logs
Here's what I tried as troubleshooting. Tried to do a system reset, factory reset and wiped cache and tried to restart my phone but no luck. Still stuck in boot loop with CM logo. Tried to reboot to bootloader but the screen is stuck with the 1+ logo for about 5 mins so gave up on that.
Basically, right now I can't access anything on the phone, can't find any way to reinstall a ROM and when I plug it into my Macbook, it is not recognised. So I'm screwed sideways. I had TWRP recovery set up so I have no clue how this happened but can anyone please help me with this.
If data isn't at risk try the Qualcomm recovery tool one the oneplus forum it's by nammand bhal (definitely butchered the name) but all data is lost and resets the phone to out of box conditions locked bootloader and Oos 2.2.1 so this is often a last measure (tool is Windows but may have Mac variant and the file is quite big)
My suggestion is to try to boot to bootloader again and flash TWRP
hmm mac book I don't have much experience with those
If you have a Windows pc you can use adb or on Mac if it has it. Also when it come to being found by a computer in recovery it should but again don't have a mac
CM13 replaced your TWRP recovery with Cyanogen Recovery.
Try to boot into fastboot by holding volume up+ power buttons. If successfull, flash TWRP Recovery, boot into it, wipe everything and do a clean install of the ROM.
Macbook won't detect your device unless it is booted up, in recovery or in fastboot mode.
Doesn't it detect while you are in CM Recovery??
Try selecting Apply Update and Update from ADB. It should detect the device atleast now. If yes, try sideloading.
AJay27 said:
CM13 replaced your TWRP recovery with Cyanogen Recovery.
Try to boot into fastboot by holding volume up+ power buttons. If successfull, flash TWRP Recovery, boot into it, wipe everything and do a clean install of the ROM.
Macbook won't detect your device unless it is booted up, in recovery or in fastboot mode.
Doesn't it detect while you are in CM Recovery??
Try selecting Apply Update and Update from ADB. It should detect the device atleast now. If yes, try sideloading.
Click to expand...
Click to collapse
I knew I would regret getting that macbook at some point
Borrowed a friend's PC and was able to flash TWRP recovery. Was then able to boot into it and do a clean install. Ended up installing Oxygen OS this time. Do you know why this issue occurred so I can research how to prevent it next time.
justicesourglide said:
I knew I would regret getting that macbook at some point
Borrowed a friend's PC and was able to flash TWRP recovery. Was then able to boot into it and do a clean install. Ended up installing Oxygen OS this time. Do you know why this issue occurred so I can research how to prevent it next time.
Click to expand...
Click to collapse
Actually I don't think the issue was with the Macbook since I have unlocked, flashed custom recoveries and sideloaded ROMs on several devices including OP2, OP3, Nexus 5, etc on mine. It might have been some accidental flashing error, which unfortunately ended up bricking your device.
Hello,
I tried installing custom rom on my G2 , here is what I did (more or less)
- rooted the phone - I think with ioroot
- flashed twrp (I think with flashify)
- couldn't boot into recovery, got "Certificate error"
- used autorec
- now twrp recovery worked.
- wiped data / cache / system
- installed Crdroid / lineageos + gapps
- rebooted
And from that point I'm stuck, I get the LG screen for a sec and then a black screen.
To boot up again I flashed the stock rom, but I want custom!!!
what can I do ?
BTW, in some of the guides I saw it said that I need to unlock the bootloader ? but when I try the guide and use the first command to boot into bootloader, all it seems to do is just reboot the system regularly.
did this "adb reboot bootloader" and that is it, "fastboot oem unlock" just said "Waiting for device"
thank you.
wolfgangam31 said:
Hello,
I tried installing custom rom on my G2 , here is what I did (more or less)
- rooted the phone - I think with ioroot
- flashed twrp (I think with flashify)
- couldn't boot into recovery, got "Certificate error"
- used autorec
- now twrp recovery worked.
- wiped data / cache / system
- installed Crdroid / lineageos + gapps
- rebooted
And from that point I'm stuck, I get the LG screen for a sec and then a black screen.
To boot up again I flashed the stock rom, but I want custom!!!
what can I do ?
BTW, in some of the guides I saw it said that I need to unlock the bootloader ? but when I try the guide and use the first command to boot into bootloader, all it seems to do is just reboot the system regularly.
did this "adb reboot bootloader" and that is it, "fastboot oem unlock" just said "Waiting for device"
thank you.
Click to expand...
Click to collapse
connect it to computer. does it shows qhsusb_bulk in device manager? if qhsusb_bulk mode then use unbrick tutorial or use srktool to unbrick...
Nah.
U just didnt flashned boostack.
Go to twrp (power + vol up)
It will ask u abount factory reset. Press Yes 3 times ( dont worry nothing will be erased).
In twrp do again wipe ( system, data, cache,davlik)
Install caf bootstack. In download select ur variant. (https://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219)
Than install rom + gapps.
It should work.
bk2601 said:
Nah.
U just didnt flashned boostack.
Go to twrp (power + vol up)
It will ask u abount factory reset. Press Yes 3 times ( dont worry nothing will be erased).
In twrp do again wipe ( system, data, cache,davlik)
Install caf bootstack. In download select ur variant. (https://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219)
Than install rom + gapps.
It should work.
Click to expand...
Click to collapse
This worked! thanks
bk2601 said:
Nah.
U just didnt flashned boostack.
Go to twrp (power + vol up)
It will ask u abount factory reset. Press Yes 3 times ( dont worry nothing will be erased).
In twrp do again wipe ( system, data, cache,davlik)
Install caf bootstack. In download select ur variant. (https://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219)
Than install rom + gapps.
It should work.
Click to expand...
Click to collapse
i got the same problem months ago.
it worked fine.:good:
I have the same issue, except I can't get into TWRP. I flashed a bumped stock bootstack and am stuck with the LG logo to black screen. Factory reset screen asks to press power to confirm, just goes back to black screen afterwards. TWRP won't load up no matter the combination. I can get to download mode, if that helps any.
Arak0n said:
I have the same issue, except I can't get into TWRP. I flashed a bumped stock bootstack and am stuck with the LG logo to black screen. Factory reset screen asks to press power to confirm, just goes back to black screen afterwards. TWRP won't load up no matter the combination. I can get to download mode, if that helps any.
Click to expand...
Click to collapse
did you manage to fix this? I'm alsostuck at this, flashing stock rom show skipping partition to me.
I ended up using the download mode to flash a Kitkat kdz with the LG Flashtool 2014, then rooted, flashed TWRP with autorec, then ran mr. bump, installed TWRP 3.1.0, and restored my nandroid backup.