Hey,
Very strange query but here goes. Rooted phone a while back and installed CM13 along with recovery. Was trying to update TWRP{ by downloading .img from their website, went to flashing, selected the file and hit recovery. Said it was succesful so attempted to reboot. Plugged in to charge and was charging but when I tried to switch it on, it was stuck in Cyanogen Bootloop (blue alien stayed on the screen for 10+ minutes). Tried rebooting to recovery by hitting power + volume down and instead of booting to TWRP, it takes me to a Cyanogen recovery screen where I see the following options:
Cyanogen Recovery.
- Reboot system now
- Apply update
- - -apply from ADB
- - -choose from emulated
- Factory reset
- - -system reset
- - -full factory reset
- - -wipe cache
- Advanced
- - -reboot recovery
- - -reboot to bootloader
- - -Wipe system partition
- - -view recovery logs
Here's what I tried as troubleshooting. Tried to do a system reset, factory reset and wiped cache and tried to restart my phone but no luck. Still stuck in boot loop with CM logo. Tried to reboot to bootloader but the screen is stuck with the 1+ logo for about 5 mins so gave up on that.
Basically, right now I can't access anything on the phone, can't find any way to reinstall a ROM and when I plug it into my Macbook, it is not recognised. So I'm screwed sideways. I had TWRP recovery set up so I have no clue how this happened but can anyone please help me with this.
If data isn't at risk try the Qualcomm recovery tool one the oneplus forum it's by nammand bhal (definitely butchered the name) but all data is lost and resets the phone to out of box conditions locked bootloader and Oos 2.2.1 so this is often a last measure (tool is Windows but may have Mac variant and the file is quite big)
My suggestion is to try to boot to bootloader again and flash TWRP
hmm mac book I don't have much experience with those
If you have a Windows pc you can use adb or on Mac if it has it. Also when it come to being found by a computer in recovery it should but again don't have a mac
CM13 replaced your TWRP recovery with Cyanogen Recovery.
Try to boot into fastboot by holding volume up+ power buttons. If successfull, flash TWRP Recovery, boot into it, wipe everything and do a clean install of the ROM.
Macbook won't detect your device unless it is booted up, in recovery or in fastboot mode.
Doesn't it detect while you are in CM Recovery??
Try selecting Apply Update and Update from ADB. It should detect the device atleast now. If yes, try sideloading.
AJay27 said:
CM13 replaced your TWRP recovery with Cyanogen Recovery.
Try to boot into fastboot by holding volume up+ power buttons. If successfull, flash TWRP Recovery, boot into it, wipe everything and do a clean install of the ROM.
Macbook won't detect your device unless it is booted up, in recovery or in fastboot mode.
Doesn't it detect while you are in CM Recovery??
Try selecting Apply Update and Update from ADB. It should detect the device atleast now. If yes, try sideloading.
Click to expand...
Click to collapse
I knew I would regret getting that macbook at some point
Borrowed a friend's PC and was able to flash TWRP recovery. Was then able to boot into it and do a clean install. Ended up installing Oxygen OS this time. Do you know why this issue occurred so I can research how to prevent it next time.
justicesourglide said:
I knew I would regret getting that macbook at some point
Borrowed a friend's PC and was able to flash TWRP recovery. Was then able to boot into it and do a clean install. Ended up installing Oxygen OS this time. Do you know why this issue occurred so I can research how to prevent it next time.
Click to expand...
Click to collapse
Actually I don't think the issue was with the Macbook since I have unlocked, flashed custom recoveries and sideloaded ROMs on several devices including OP2, OP3, Nexus 5, etc on mine. It might have been some accidental flashing error, which unfortunately ended up bricking your device.
Related
While using the PA Updater app to upgrade my rom, the app attempted to reboot into recovery to run an openrecovery script. While doing this, I believe it set my "reboot mode flag" to recovery.
The tablet boots with the Google screen and then shows the TWRP splash (I'm on version 2.6.0.0), then it reboots and starts again.
I am able to get to the bootloader, but even if I press start or recovery mode it reenters the boot loop trying to get into recovery. In the bootloader was where I saw the reboot mode flag set to recovery. Is there a way to use fastboot to remove that or am I just going to have to do a wipe with fastboot?
It happened to me once. I pushed the power button for 60 seconds as it supposed to do a kind of battery pull, and it worked.
HunterOrHunted said:
While using the PA Updater app to upgrade my rom, the app attempted to reboot into recovery to run an openrecovery script. While doing this, I believe it set my "reboot mode flag" to recovery.
The tablet boots with the Google screen and then shows the TWRP splash (I'm on version 2.6.0.0), then it reboots and starts again.
I am able to get to the bootloader, but even if I press start or recovery mode it reenters the boot loop trying to get into recovery. In the bootloader was where I saw the reboot mode flag set to recovery. Is there a way to use fastboot to remove that or am I just going to have to do a wipe with fastboot?
Click to expand...
Click to collapse
same thing just happened to me... tried Factory Reset and TWRP ran an Open Recovery Script and boom... boot loop... TWRP screen pops up and then goes to loop...
tried pressing powerbutton but no use...
any workaround for this???
Lordificated said:
same thing just happened to me... tried Factory Reset and TWRP ran an Open Recovery Script and boom... boot loop... TWRP screen pops up and then goes to loop...
tried pressing powerbutton but no use...
any workaround for this???
Click to expand...
Click to collapse
I've done this twice to my nexus now and I think I found a reliable way to restore to running condition. YMMV
1)Boot the nexus into fastboot (power and both volume keys) when you power up.
2)Attach your usb cable from the PC (or MAC I guess, dont have one to try)
3)start WUG Nexxus Root Toolkit. 'Launch' advanced utilities.
4)Test your fastboot with Quick tools. check the button at Fastboot-Bootloader and click 'List Devices' if the box that pops up is empty then fastboot isn't working (I can't help you there and it must be working to continue).
5)If fastboot shows a device then go to "Boot Temporary" and click 'Custom Recovery'.
6)I selected 'Touch TWRP' but CMW may work as well. This will reboot you into (temp)TWRP and from there you can force a reboot that will reset the 'Recovery' flag that has locked your bootloader.
7)Give it a few minutes (be patient for 5 minutes) and hopefully you reboot to where you were prior to this mess.
Long time lurker and couldn't fix my fails without everyone here.
Thanks to all.
Bill
HunterOrHunted said:
While using the PA Updater app to upgrade my rom, the app attempted to reboot into recovery to run an openrecovery script. While doing this, I believe it set my "reboot mode flag" to recovery.
The tablet boots with the Google screen and then shows the TWRP splash (I'm on version 2.6.0.0), then it reboots and starts again.
I am able to get to the bootloader, but even if I press start or recovery mode it reenters the boot loop trying to get into recovery. In the bootloader was where I saw the reboot mode flag set to recovery. Is there a way to use fastboot to remove that or am I just going to have to do a wipe with fastboot?
Click to expand...
Click to collapse
I had the same thing happen to me (though i updated from stock 4.4 to 4.4.2 [and i had twrp installed]). I tried reflashing to stock recovery and a few other things but same problem, it kept booting me into stock recovery. I know this is going to sound crazy, even stupid, but just letting it sit there for 5 minutes (at the stock recovery screen) let it work... I was searching for more things to try and it just started booting.... Checking the bootloader again showed the reboot mode flag set to none.
zeroedout420 said:
I had the same thing happen to me (though i updated from stock 4.4 to 4.4.2 [and i had twrp installed]). I tried reflashing to stock recovery and a few other things but same problem, it kept booting me into stock recovery. I know this is going to sound crazy, even stupid, but just letting it sit there for 5 minutes (at the stock recovery screen) let it work... I was searching for more things to try and it just started booting.... Checking the bootloader again showed the reboot mode flag set to none.
Click to expand...
Click to collapse
I guess mine worked because I was still on stock bootloader and adding TWRP was an important key but the 5 minutes seems to be the solution after all the rest.
recovery boot loop:- Is coz, one of your partitions would be facing problems while mounting.. So Wipe the Partition and Format it with Ext-2 file format. and reboot the Mobile. Then it'll stops rebooting.
Do you have a Samsung device?
Be warned - there is no such thing as fastboot mode for most Samsung Galaxy devices - you'll be wasting your time doing this and typing "fastboot devices" for many hours!
If you have problems with your recovery, it works to just reflash the CF-autoroot kit, which happens to flash the cache partition too. My problem was similar to the OP's - a bootloop with TWRP's obviously buggy OpenRecoveryScript, which was installing a ZIP file over and over again.
If you flash the CF-autoroot specific to your device, TWRP will be gone, but the phone will boot normally again - with all your data on it - hooray!
Then you install TWRP or CWM recovery as you did originally.
Stay away from OpenRecoveryScripts! I'll be installing a ZIP file in the traditional, manual way from now on, from an external SD card so I can remove the card if I get another TWRP boot loop.
carltasmania said:
Be warned - there is no such thing as fastboot mode for most Samsung Galaxy devices - you'll be wasting your time doing this and typing "fastboot devices" for many hours!
If you have problems with your recovery, it works to just reflash the CF-autoroot kit, which happens to flash the cache partition too. My problem was similar to the OP's - a bootloop with TWRP's obviously buggy OpenRecoveryScript, which was installing a ZIP file over and over again.
If you flash the CF-autoroot specific to your device, TWRP will be gone, but the phone will boot normally again - with all your data on it - hooray!
Then you install TWRP or CWM recovery as you did originally.
Stay away from OpenRecoveryScripts! I'll be installing a ZIP file in the traditional, manual way from now on, from an external SD card so I can remove the card if I get another TWRP boot loop.
Click to expand...
Click to collapse
How do you install cf-autoroot when stuck in a boot loop with samsung galaxy S device if there is no fastboot?
My phone is stuck in bootloop too. It shows Twrp at the starting and then restarts. What am i supposed to do? I need help ASAP please
Hi guys
So, i've been at this for most part of today. Looked all around and tried everything i found, and im still clueless.
I've done this steps twice, with the second time being more step-by-step instead of bulk actions, always starting from miui 8 global stable rom:
1 - flash twrp via fastboot with twrp-installer.bat for redmi 3s
2 - reboot into stock bootloader with power + vol+ and choose recovery to boot into twrp
3 - in twrp, slide to modify system and disable dm-verity in advanced options
4 - reboot into stock rom and power off phone
5 - boot into twrp in the same way as in step 2
6 - clean dalvik, system, data and cache partitions
7 - flash lineageos 13 from lsferreira and gapps
8 - reboot into custom rom and power off phone
9 - try to boot into twrp in the same way as in step 2 - NOK, just gets stuck at the MI logo
10 - reboot into custom rom and reboot into recovery from the power menu, twrp OK
11 - flash something, like goodix fix or xposed
12 - reboot into custom rom, verify installed packages OK
From this point on, i can not get back into recovery, either stock bootloader or twrp. Tried from the power menu, vol+ button, reflashing twrp through fastboot and adb, booting directly from recovery.img from fastboot and even reflashing stock recovery. The rom always boots fine and so does fastboot.
I saw some posts saying to hold both vol- and vol+, but this just seems to boot the phone in some deep recovery mode, judging by the drivers that the PC tries to install (EDL maybe?)
The only way i can get the bootloader/recovery (the vol+ chinese menu) back is to reflash stock miui 8 through miflash tool, which gets me to the starting line.
Will anyone be kind enough to point me to the blatantly obvious mistake im making?
I think I found a solution. I flashed a different twrp recovery (the one provided by fedosis, by cofface) instead of the one linked in every how-to in both this and miui's forums.
Now i can boot to recovery everytime.
My phone is a6000 plus variant and was running on CM 12.1 update 19 prior to getting bricked. I have flashed the same ROM before, however, this time I ended up flashing it twice-the second flash without clearing cache, data and the like and on top of the same ROM.
The problem is that the phone is not booting into recovery (just showing the lenovo logo).
It is however booting into fast boot mode. (Hold power key for reboot).
Now, I would just use adb to flash the phone but with cyanogenmod 12.1 with no update, the device is not showing in adb. (The USB worked fine before this, however I had USB connected during flashing and noticed that CM 12.1 with no update would not be detected on my PC.)
The phone is alive and well just not being detected in adb. Every time I connect the device to my PC via USB, the drivers install but fail.
I tried updating the drivers with device manager but error 10 is showing.
If I remove the battery the phone shuts down, until I power it up again, which results in the lenovo android logo on the screen.
What are my options in such a case?
Timeline of events:
I boot my phone into twrp with adb and flash CM 12.1 no update.
I see that the PC adb is not working and drivers fail to install.
I boot the phone into recovery using advanced recovery and notice that in twrp recovery the adb devices detect my phone.
I flash a queue of CM 12.1, update 20 and super user zip.
I recall that I had forgotten to clear data, cache and the like and end up dirty flashing.
I reboot the phone thinking it will fix it but the device just boots up the android and lenovo logo.
Furthermore, the device is not being detected in adb and drivers fail to install.
AsCi1 said:
I boot my phone into twrp with adb and flash CM 12.1 no update.
I see that the PC adb is not working and drivers fail to install.
I boot the phone into recovery using advanced recovery and notice that in twrp recovery the adb devices detect my phone.
I flash a queue of CM 12.1, update 20 and super user zip.
I recall that I had forgotten to clear data, cache and the like and end up dirty flashing.
I reboot the phone thinking it will fix it but the device just boots up the android and lenovo logo.
Furthermore, the device is not being detected in adb and drivers fail to install.
Click to expand...
Click to collapse
First of all remove your sd card and use a sd card reader or put it in another phone.
Then on the other phone/PC download a stock CM12 or 13 ROM and Gapps.
Save the ROM on the sd card.
Put the sd card on your phone and go to recovery
Wipe everything except SD CARD and then flast the ROM and GApps
Hey everyone,
I decided to root my lg g6 and got a fickle. After unlocking the device and flashing TWRP I tried to boot into it (''adb reboot recovery'' command) and it deleted all data and then twrp shows on screen for a split second and almost instantly boots normally into android so I set it up while still being unable to access twrp and any of it's functions. Does anyone have any idea what could be the problem?
P.S. Of it helps: before that i had a problem that every time I tried to use the ''adb reboot recovery'' command the console said ''no devices/emulators found''. After a couple tries I wanted to check whether the phone was connected just to make sure (''adb devices'') and after that it worked and I ran into the problem above.
Thanks for all the answers
When you first unlock BL and flash recovery you have to manually enter recovery mode.
Hold power and vol down till it turns off. Hold same buttons again until you see lg logo. Release power and press and hold again.
Then ask you to wipe etc hit yes both times and it will boot to twrp.
I tried that but it still doesn't go into twrp. After confirming that wipe stuff it just boots into android (without wiping)
Ulrih said:
I tried that but it still doesn't go into twrp. After confirming that wipe stuff it just boots into android (without wiping)
Click to expand...
Click to collapse
You have to flash TWRP recovery and when it complete then use the button combo to boot into twrp, otherwise it will boot and restore the recovery.
flash twrp
button combo to twrp
done
Yes I've done that but the problem still exist.
btw thanks for the help
Maybe try fastboot flash recovery recovery.img
Try the all-in-one tool on this forum
By the way, I am running into the same issue.. I have a LG G6 US997,.. I have tried installing TWRP unofficial ones so many times and every time i manually try to access the recovery.. the phone simply wipes all my data to default
Hello,
I have the same problem. Did anyone figure out how to solve it? I'd highly appreciate any help.
If I try to boot into recovery, it asks me to factory reset, i hit yes twice and then the phone just goes on to boot normally. The data is not wiped but I can't get into TWRP.
If I enter "fastboot reboot recovery" after flashing TWRP it returns "fastboot: usage: unknown reboot target recovery"
So after stupidly trying to update twrp through twrp instead of fastboot, I can only access fastboot and the universal bootloader installed on the phone. If I don't do anything, the phone simply goes through universal bootloader and I see a small penguin before the screen goes back and I need to restart the phone again. However, in the bootloader I can select to go to fastboot which does work. I've tried flashing TWRP through fastboot (fastboot flash recovery twrp...) and it said success however after clicking 'reboot to recovery', the phone once again just boots to the bootloader and I'm back at square one.
Thank you so much if anyone can help!
FYI, you can update TWRP using TWRP. Nothing wrong with that, I do it all the time. It's faster and easier to do so.
You might have an incompatibility between bootstack and TWRP.
So, please provide us more info.
ROM:
Bootstack used:
TWRP version:
What were you trying to do besides updating TWRP?:
Funny thing... I'm having the exact same problem.
I instaled TWRP (3.1.1-0-9c3b7e99) using the AxonToolkit 1.2.1.
Everything went smooth with the toolkit. I could get into TWRP and did some back-ups (as recommended), then wipe Dalvik/ART Cache, System, data, cache, and finally, try to install LineageOS 15.1.
I used the files:
- ZTE_A7LOSv1_UniversalBootStack.zip
- A2017U_OreoModem.zip
- lineage-15.1-20180810-UNOFFICIAL-axon7.zip
UniversalBoot and Modem were installed correctly, but I got an error when trying to install Lineage. I can't remeber the error number but it said something like: "this ROM is for device ailsa_ii_axon7 but this device is ."
Since then... my phone is in eternal loop and can only get into Fastboot. Can't access TWRP.
Thanks in advance to anyone willing to help me.
Don't mind... I have it back.
After many reboots, It only seems that this is working different with the Universal O bootloader. On the main screen, I tap the volumen button, choose "Recovery", reboot, press the power button on the main screen, press it again, the Linux Pinguin appears, press power button again, and then TWRP is back.
After that, I got to wipe and do the normal ROM installation process.