Related
Hey guys I was was flashing up to VIPERS rom after I put the phone back to default and updated to 2.2. Well any way step by step I first did the ONE CLICK ROOT. Then I download the DK28.pit(put pit in the pit section) and I download the modem.bin (and put that in the phone section) and I forgot to uncheck re-partition. I then put the phone in download mode and it finished with no errors. Of course it bricked my phone and the only thing it would do was go into download mode!
I had never bricked my phone before and it was cause of rookie mistakes.. I was reading numerous threads about how to fix a bricked phone and it didn't seem to hard to fix. I downloaded the original firmware SPH-D700-DG27-8Gb-REL(in PDA section) and the pit file that came with it. I attempted to flash it with odin and it keep failing so I looked for a alternative route.
Finally I found a post http://forum.xda-developers.com/showthread.php?t=732199 and followed the guide to a T and everything finished up just fine.(I just figured it would work because it had all the files in ODIN) And I was positive that everything was going to work just fine! I was planing to just get it up and running and then get the phone back to its original firmware.. But now the phone will not even go into download mode..
P.S. I have tried pulling the sd card out and the battery, and while holding 1 and the power button while trying to put it in download mode(like i had to do previously) and there is no response. Any suggestions?
clem4221 said:
Hey guys I was was flashing up to VIPERS rom after I put the phone back to default and updated to 2.2. Well any way step by step I first did the ONE CLICK ROOT. Then I download the DK28.pit(put pit in the pit section) and I download the modem.bin (and put that in the phone section) and I forgot to uncheck re-partition. I then put the phone in download mode and it finished with no errors. Of course it bricked my phone and the only thing it would do was go into download mode!
I had never bricked my phone before and it was cause of rookie mistakes.. I was reading numerous threads about how to fix a bricked phone and it didn't seem to hard to fix. I downloaded the original firmware SPH-D700-DG27-8Gb-REL(in PDA section) and the pit file that came with it. I attempted to flash it with odin and it keep failing so I looked for a alternative route.
Finally I found a post http://forum.xda-developers.com/showthread.php?t=732199 and followed the guide to a T and everything finished up just fine.(I just figured it would work because it had all the files in ODIN) And I was positive that everything was going to work just fine! I was planing to just get it up and running and then get the phone back to its original firmware.. But now the phone will not even go into download mode..
P.S. I have tried pulling the sd card out and the battery, and while holding 1 and the power button while trying to put it in download mode(like i had to do previously) and there is no response. Any suggestions?
Click to expand...
Click to collapse
I hope you didnt flash JG5 to your epic. I believe this will cause a real hard brick.
If you flashed JG5, congratulations, you just killed your Epic.
Also, please read the stickies before you post. This is Android DEVELOPMENT. Questions are to be asked in General.
This is why you READ before you begin dealing with stuff like this.. The modem goes in the PDA section not phone; and if your phone can't boot; or go into download mode.. There is no hope.
Seems like you've truley bricked your phone my friend..
I did read it and it said that I needed to put the modem in the phone section. But good news is I have a new epic waiting at the repair center 4 me to pick up today.. I was practicing on the messed up one so I would do it on this one right.. I have rooted and flashed every phone I have ever had and never had a problem.. The original post I found for odin said to put the modem in the phone section..
It is pretty darn hard to brick these, even if you flash incorrectly. Try taking the battery out for 20 minutes and then putting it back in. Should get you to download mode.
I always put modem in phone, pit in pit, and the tar.md5 in pda. Always works.
Sent from my SPH-D700 using XDA App
If you're using the full .tar.md5, there's no need to place the modem.bin in the modem section; there's already a modem inside the .tar.md5.
I am pretty sure its done.. No biggie though I am going to get my new one today.. I am glad I work at SPRINT!!! It wasnt bricked until I did the JG5.. I was trying to figure out if it changed the buttons that put it in download mode but I couldn't find a combo.. oh first bricked phone in years of flashing cause I was trying to rush things
*removed 10chars
clem4221 said:
Well any way step by step I first did the ONE CLICK ROOT.
Click to expand...
Click to collapse
If you're using Odin to flash anything except a modem, it will completely wipe the phone (not the SD card, so don't worry about that) - which means performing the One Click Root before hand is unnecessary because it will be overwritten.
Also, in the future, don't start a new thread like this in the Development section - there is a Q&A thread in the Dev section that you could use, or you could post in the General section... I'm not trying to start a flame war (which seems to be what usually happens lately, lol), just trying to bring you up to speed on where to post - we have recently started a renewed effort to clean out the clutter and put an end to redundant posts, so that noobs and experienced users alike will be able to more quickly and easily find the information they need, making it easier to NOT brick your phone
Please post questions in General Section.
I think it would be nice if someone could post a screenshot guide for noobs to stop asking these questions (including me) and do the flashing back to di18 and coming back to dk28 easily. I m in the same boat.. havent flashed it yet..will be doing later today but i m **** scared that i might brick it.. no matter how many times i read and post questions.. I know it cud be difficult for pros to put together a guide but if someone can that would really cut down all the questions and numerous threads in this forum.. I can do that but once I get all the info .. and do my stuff properly only
In other news from 1993: Messageboard forums around the world introduce new feature that allows users the ability to search for already previously discussed topics.
Sent from my SPH-D700 using Tapatalk
styckx said:
In other news from 1993: Messageboard forums around the world introduce new feature that allows users the ability to search for already previously discussed topics.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
QFT
Traced with Ultra Keyboard from my *Epic*
So many of us was at this point sometimes, maybe due to knowledge is poor, maybe its just glitches, but we all make mistakes, cause we are humans. So humans wanna show you how to fix your LG G3 D855 model when you get errors like : -Secure boot error (mostly due to wrong recovery flash,as far i know, you will correct me if am wrong anyway)
- Boot verification failed.
In both scenarios you cant access recovery or download mode. Phone just reboots and screen gone black with LED blinking red and blue to the eternity. I am here to help u restore your phone to former condition.
I take no credits for this , cause i just reuploaded files, and rewriten text and everything , cause old post on has been deleted and i cant find it anywhere, but i still got the files in my PC.
Just download all the files in folder at Drive, and folow instrucions given as they are. BTW there are pictures, so u can do it wrong only if u are ...u know.
Dont hold me responsible for any damage on your device. I tryed this metod about 10 times in a row, so i am confirming that it works.
This metod dont require you to short anything, its just click-click-click, connect...you get it .
Sorry cause my grammar, but my English is little rusty since i wasnt using it in a really long time.
Good luck people!
https://drive.google.com/folderview?id=0BxSHUEybMlBTWW8wY1VJeVEzdDA&usp=sharing
KDZ file which you put in flashtool folder : http://oceanhost.eu/dsqnjfke3ueq/D85520H_00.kdz.htm
Important. What about refurbished g3, flashing wrong kdz will cause a super brick, first off all check the variant from the motherboard or just on the back of phone.
boot verification Fail !!! - Cause: MISMATC SIG LEN
I had a problem s LG g3 d850: after trying to flash rikaveri phone is not charged and does not go into the kind of rekaveri oshybki boot verification Fail !!! - Cause: MISMATC SIG LEN, after etoj inscriptions tolto indicator flashes blue krasnіm i . Help how to get back in aparata robochem state.
Tried your method does not poluchaetsa can be detailed instructions ? On the phone firmware 6.0
Guys one thing to be kept in mind.most of refurbished d855 doesn't come d855 board.so such errors arise because of wrong model of recovery flashing.so confirm your model by opening your phone and looking at the board.
milance92 said:
So many of us was at this point sometimes, maybe due to knowledge is poor, maybe its just glitches, but we all make mistakes, cause we are humans. So humans wanna show you how to fix your LG G3 D855 model when you get errors like : -Secure boot error (mostly due to wrong recovery flash,as far i know, you will correct me if am wrong anyway)
- Boot verification failed.
In both scenarios you cant access recovery or download mode. Phone just reboots and screen gone black with LED blinking red and blue to the eternity. I am here to help u restore your phone to former condition.
I take no credits for this , cause i just reuploaded files, and rewriten text and everything , cause old post on has been deleted and i cant find it anywhere, but i still got the files in my PC.
Just download all the files in folder at Drive, and folow instrucions given as they are. BTW there are pictures, so u can do it wrong only if u are ...u know.
Dont hold me responsible for any damage on your device. I tryed this metod about 10 times in a row, so i am confirming that it works.
This metod dont require you to short anything, its just click-click-click, connect...you get it .
Sorry cause my grammar, but my English is little rusty since i wasnt using it in a really long time.
Good luck people!
https://drive.google.com/folderview?id=0BxSHUEybMlBTWW8wY1VJeVEzdDA&usp=sharing
KDZ file which you put in flashtool folder : http://oceanhost.eu/dsqnjfke3ueq/D85520H_00.kdz.htm
Click to expand...
Click to collapse
PLease i have thism problem cant fix it.......i dont have com port any more on my device manager only a QHSUSB_BULK please help me
duig said:
PLease i have thism problem cant fix it.......i dont have com port any more on my device manager only a QHSUSB_BULK please help me
Click to expand...
Click to collapse
What OS do you use ? Try to disable driver signing at starting your pc . Then reinstall drivers, restart PC, then pull battery out, conect device, and then insert batery . Should work .
milance92 said:
What OS do you use ? Try to disable driver signing at starting your pc . Then reinstall drivers, restart PC, then pull battery out, conect device, and then insert batery . Should work .
Click to expand...
Click to collapse
windows 10 how do i disable driver signing ??please
duig said:
windows 10 how do i disable driver signing ??please
Click to expand...
Click to collapse
Follow this guide.your question is answered there.
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Jahanzaibawan said:
Follow this guide.your question is answered there.
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Click to expand...
Click to collapse
this method u linked require to short mobo, my method dont, its way more simple.
milance92 said:
So many of us was at this point sometimes, maybe due to knowledge is poor, maybe its just glitches, but we all make mistakes, cause we are humans. So humans wanna show you how to fix your LG G3 D855 model when you get errors like : -Secure boot error (mostly due to wrong recovery flash,as far i know, you will correct me if am wrong anyway)
- Boot verification failed.
Good luck people!
Click to expand...
Click to collapse
Thank you so much! What would I do without you
Got "Boot verification failed" when I got into the secret menu and tried to do "device test".
I got Fulmics 6 ROM installed and the device failed for some reason to load the MiniOS (used by the "device test").
Wasted about 5 hours until I got to this post.
This post was so useful I almost cried out of joy.
THANKS!!!
EDIT:
mirrored the files in dropbox:
https://www.dropbox.com/sh/vn71zlrooyxe73d/AAABVAXEfYSQPlHhOLFql51Ra
For some reason the BoardDiag available here didn't work for me. It would always says "Serial port open FAILED".
I tried with willcracker version and it worked. You can download from here: http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Just a few questions before I begin, I'm obviously... u know :
1. First, I install the drivers. In what state should the phone be in when I connect it to the PC? Probably in the only possible state, that means with the screen blank and the red and blue leds blinking, correct?
2. Do I have to remove the battery before connecting the phone?
3. Flashing the last partition, sbl1, causes the phone to reboot, right? So, in the last step when flashing the kdz, does the phone have to be in download mode?
Thanks!
FaserF said:
Thank you so much! What would I do without you
Click to expand...
Click to collapse
No problem man. I dont own G3 anymore, switched back to my beloved G Pro 2 d838 since its updated to CM 13 and CM 14.1 I gifted G3 to my GF. But i still can try something usefull and post here if i find some.
FaserF said:
Thank you so much! What would I do without you
Click to expand...
Click to collapse
Np bro.
Please help me. I have installed all drivers but my G3 D855 is not getting detected by my pc. My pc is running on Windows 7 64bit. Please help me..!
in case anyone is bothering with this in 2020+ on windows10, i did run into a few hiccups and managed to boot a 'bricked' phone I bought for 50 eur
1. Only install the approproate driver for your windows architecture of QDLoader
2. If LGFlashTool2014 is demanding mfc100.dll, you need to install a Microsoft Visual C++ 2010 Redistributable Package, yes, the x86 one: https://www.microsoft.com/en-us/download/details.aspx?id=5555
3. If after launching LGFlashTool2014 once, then closing, then launching again it doesn't turn on, you need to follow these steps: go to C:\Users\<YourWindowsUsername>\AppData\Local\Temp and delete everything you can, these are temporary files that programs on your pc store, they're not important, but LGFlashTool2014 for some reason makes some files that prevent it from launching
Since then the phone crashed a few times so I understand now how it got bricked, a faulty motherboard most likely, going to try baking it as described here: https://redd.it/5e0nx7 but this is irrelevant to the thread and just here for anyone stumbling upon in the distant dystopian future
Very informative post.
---------- Post added at 05:12 AM ---------- Previous post was at 04:53 AM ----------
very good post.
This thread is to inform that a Custom Kernel has been released
And is completely Working
P.S - For the people who even said that fingerprint source isn't compiling
Try this!
Thanks to a friend and developer for our phone Nishanth
He is the developer of the AOPS ROM for our device.
Thread link : http://forum.le.com/in/index.php?th...s-rom-for-le1s-with-themes.17151/#post-122923
ROM Review by vaisakh -
https://youtu.be/5e-G8BIxrus
Its all fixed and compiles perfectly.
The link for the custom kernel is on github for all the Le1s developers out there
Can contribute for the development of the device.
https://github.com/psycho-source/android_kernel_leeco_psycho-kernel_MT6795
ZIMAGE file download link
https://www.dropbox.com/s/ztq414yjkq2hmo0/Psycho-Kernel.img-zImage?dl=0
Is there any chance of getting cm14 with this??
As with one of the posts made over at leeco.re the forum post link is broken, you can't always grab a link as part of a larger text selection, you need to right click on the link and select to copy the link.
Also, it would be nice to have an actual kernel to download for those who don't have a suitable build environment, nothing I have found with your info points to or provides a downloadable kernel which suggests that as of now it is vapour-ware.
Nameless One said:
As with one of the posts made over at leeco.re the forum post link is broken, you can't always grab a link as part of a larger text selection, you need to right click on the link and select to copy the link.
Also, it would be nice to have an actual kernel to download for those who don't have a suitable build environment, nothing I have found with your info points to or provides a downloadable kernel which suggests that as of now it is vapour-ware.
Click to expand...
Click to collapse
Hey, Thanks for replying! I can provide u the zImage only as I am not yet able to flash just the kernel zImage directly from zip via recovery so i simply create a new boot.img and flash tht! If u want then I can simply provide you with zImage also! I will post the link here soon!
Thanks
---------- Post added at 05:37 AM ---------- Previous post was at 05:19 AM ----------
Here you go! the zImage compiled one!
https://www.dropbox.com/s/ztq414yjkq2hmo0/Psycho-Kernel.img-zImage?dl=0
For people who dont know whats zImage or what is the difference between zImage and Boot.img
Please please dont flash it directly via recovery as img file u will surely mess your boot partition and i wont be held responsible for tht!
Rest all if u put it in ur boot img or flash via any kernel flasher or whatever app u can then it will 100% work with no problems!!!
Thanks, I'll just have to dust the cobwebs off the brain cells I'll need to use to get this on the phone
Please develope a good cm 14.1 rom anyone here
1harsh1 said:
How to compile the kernel source and build rom ?
Please make a tutorial of it ..
Click to expand...
Click to collapse
If you have no idea of linux or ROM development it is recommended that you don't do anything as it will be a waste of time for you
Does this custom kernel supports VOlte
Thnx for sharing my video.
Abhi_ said:
This thread is to inform that a Custom Kernel has been released
And is completely Working
P.S - For the people who even said that fingerprint source isn't compiling
Try this!
Thanks to a friend and developer for our phone Nishin
He is the developer of the AOPS ROM for our device.
Thread link : http://forum.le.com/in/index.php?th...s-rom-for-le1s-with-themes.17151/#post-122923
ROM Review by vaisakh -
https://youtu.be/5e-G8BIxrus
Its all fixed and compiles perfectly.
The link for the custom kernel is on github for all the Le1s developers out there
Can contribute for the development of the device.
https://github.com/psycho-source/android_kernel_leeco_psycho-kernel_MT6795
ZIMAGE file download link
https://www.dropbox.com/s/ztq414yjkq2hmo0/Psycho-Kernel.img-zImage?dl=0
Click to expand...
Click to collapse
But although, I personally feel ashamed cuz of that video. AOPS ROM neva gave me 6hrs sot, the dev asked me to say so, so that he could get people to download it. AOPS is nothing more that AOSP with material UP theme and few more tweaks. Anyways, thnx for sharing
It would be best if you could do a step by step guide for some newbies who doesnt know how is the procedure on flashing/installing the kernel on their phone...
post an app for flashing
nishsin26 said:
Hey, Thanks for replying! I can provide u the zImage only as I am not yet able to flash just the kernel zImage directly from zip via recovery so i simply create a new boot.img and flash tht! If u want then I can simply provide you with zImage also! I will post the link here soon!
Thanks
---------- Post added at 05:37 AM ---------- Previous post was at 05:19 AM ----------
Here you go! the zImage compiled one!
https://www.dropbox.com/s/ztq414yjkq2hmo0/Psycho-Kernel.img-zImage?dl=0
For people who dont know whats zImage or what is the difference between zImage and Boot.img
Please please dont flash it directly via recovery as img file u will surely mess your boot partition and i wont be held responsible for tht!
Rest all if u put it in ur boot img or flash via any kernel flasher or whatever app u can then it will 100% work with no problems!!!
Click to expand...
Click to collapse
it would be better if you name an app for flashing kernel
blackode said:
It would be best if you could do a step by step guide for some newbies who doesnt know how is the procedure on flashing/installing the kernel on their phone...
Click to expand...
Click to collapse
huh this is not a procedure or anything
this is a kernel required to build a ROM
Ok so my friend flashed the zimage from recovery and the phone is not booting up. I tried to recover it by flashing the stock rom with flashtool but no effect. Can't even go to either recovery or fastboot. Help me to get it back working. Thanks in advance.
z1_nile said:
Ok so my friend flashed the zimage from recovery and the phone is not booting up. I tried to recover it by flashing the stock rom with flashtool but no effect. Can't even go to either recovery or fastboot. Help me to get it back working. Thanks in advance.
Click to expand...
Click to collapse
Seriously? How you flashed zImage via recovery?
Flashed it in boot partition??
I already warned u guys i guess not to do it!
Flash stock boot.img via fastboot
nishsin26 said:
Seriously? How you flashed zImage via recovery?
Flashed it in boot partition??
I already warned u guys i guess not to do it!
Flash stock boot.img via fastboot
Click to expand...
Click to collapse
I don't even own the device he did renamed the file with root explorer and flashed as a kernel lol. But i tried flashing whole firmware through sp flashtool but the device wasn't booting. Got it working by completely formatting through flashoot (even the bootloader). It did wiped his imeis too lol. but got them fixed with engineering mode. so chill everything is under control. Hope you build a great kernel for that device.
idiot said:
But although, I personally feel ashamed cuz of that video. AOPS ROM neva gave me 6hrs sot, the dev asked me to say so, so that he could get people to download it. AOPS is nothing more that AOSP with material UP theme and few more tweaks. Anyways, thnx for sharing
Click to expand...
Click to collapse
LOL
z1_nile said:
I don't even own the device he did renamed the file with root explorer and flashed as a kernel lol. But i tried flashing whole firmware through sp flashtool but the device wasn't booting. Got it working by completely formatting through flashoot (even the bootloader). It did wiped his imeis too lol. but got them fixed with engineering mode. so chill everything is under control. Hope you build a great kernel for that device.
Click to expand...
Click to collapse
Man I have the same problem can u please help me please give steps
Aryadeadpool said:
Man I have the same problem can u please help me please give steps
Click to expand...
Click to collapse
Ok don't worry help is here,
1) Get your firmware. It will contain rom, flashtool, drivers. Install drivers first, install minimal adb and fast boot drivers too.
2) Open flashtool got to advanced format options it's on the other tab. Select complete wipe include bootloader.
3) Flash the rom, it'll have a txt page with instruction about it or Google it if you still have problems ask me.
4) wait till the process ends and your phone will be back.
5) You will have no imei(s) in your device and it won't recognize sim card. Get toolhero app it will set you imei(s) and for God's sake write them somewhere you can reach anytime cause they will disappear everytime you factory reset/wipe/change roms/ and it's a stupid thing that toolhero requires Internet to set the imei(s) so keep a Hotspot or WiFi near while next time you experiment with your device. Hope this helps.
z1_nile said:
Ok don't worry help is here,
1) Get your firmware. It will contain rom, flashtool, drivers. Install drivers first, install minimal adb and fast boot drivers too.
2) Open flashtool got to advanced format options it's on the other tab. Select complete wipe include bootloader.
3) Flash the rom, it'll have a txt page with instruction about it or Google it if you still have problems ask me.
4) wait till the process ends and your phone will be back.
5) You will have no imei(s) in your device and it won't recognize sim card. Get toolhero app it will set you imei(s) and for God's sake write them somewhere you can reach anytime cause they will disappear everytime you factory reset/wipe/change roms/ and it's a stupid thing that toolhero requires Internet to set the imei(s) so keep a Hotspot or WiFi near while next time you experiment with your device. Hope this helps.
Click to expand...
Click to collapse
some brom error is coming constantly when I click on start after 10 seconds exactly
please help and specify the scatter and download agent
Aryadeadpool said:
some brom error is coming constantly when I click on start after 10 seconds exactly
please help and specify the scatter and download agent
Click to expand...
Click to collapse
OK which tutorial of flashing you followed?
Explain each step and does it include Auth file?
Here is a quick and dirty hack to remove the bootloader unlocked message from the ONN 10.1 non-keyboard model. To flash it, first extract the file onn10-1orangemod.7z to somewhere you can locate the files. Fire up SP Flash Tool, choose the Download tab, make sure its set to DOWNLOAD ONLY, load the scatter file included in the onn10-1orangemod.7z file, then deselect all files to download EXCEPT Preloader, Items, LK, LK2. Click on each and browse to where you extracted the 7z file to and choose the appropriate for each section; IE: lk-mod.bin, lk2-mod.bin, etc. Now power off your tablet if its on. Now click the Download button in SP Flash Tool then immediately plug the tablet into your computer. It should detect the tab in VCOM mode, send the preloader then flash the modified files. Upon completion, power the tablet back on and presto, message is gone.
DISCLAIMER
You choose to do this procedure all by yer lonesome. If you brick, I am not responsible.
Does this only work on the x003 or can it work on all three?
I guess that's a NO. Does anyone else know how to do this?
Hey sorry for taking so long to reply. RealLife has been wreaking havoc on me lately. No, I would not attempt this on the other two models. If you can get me the lk.bin files for your model, I can patch them for you.
Hey thanks for replying. No worries, glad you came back. I've attached the other two just incase you wanna have them all on here. Great work by the way. Orange State always ****s with my OCD lol.
razredge said:
Hey thanks for replying. No worries, glad you came back. I've attached the other two just incase you wanna have them all on here. Great work by the way. Orange State always ****s with my OCD lol.
Click to expand...
Click to collapse
Is there a way you could link me for the B007 for spflash tools all the files required for spflash tools id greatly appreciate it unfortunately bricked my tablet. In need of those if possible if you could provide them id be grateful.
The links I posted are the lk.bin files. They're just zipped so I can post them.
Mad.Cactus said:
Here is a quick and dirty hack to remove the bootloader unlocked message from the ONN 10.1 non-keyboard model. To flash it, first extract the file onn10-1orangemod.7z to somewhere you can locate the files. Fire up SP Flash Tool, choose the Download tab, make sure its set to DOWNLOAD ONLY, load the scatter file included in the onn10-1orangemod.7z file, then deselect all files to download EXCEPT Preloader, Items, LK, LK2. Click on each and browse to where you extracted the 7z file to and choose the appropriate for each section; IE: lk-mod.bin, lk2-mod.bin, etc. Now power off your tablet if its on. Now click the Download button in SP Flash Tool then immediately plug the tablet into your computer. It should detect the tab in VCOM mode, send the preloader then flash the modified files. Upon completion, power the tablet back on and presto, message is gone.
DISCLAIMER
You choose to do this procedure all by yer lonesome. If you brick, I am not responsible.
Click to expand...
Click to collapse
so im really new to spflash, this is the first time i've ever used it. i'm using it to try and get my onn 10.1 without keybord out of the ORANGE STATE. i followed your guide to the best of my currant ability and im getting a message that reads Boundary Check Failed: r om_end_addr>= next rom beigin_addr. ROM(ITEMS): rom_end_addr then a bunch of numbers that i can provide is nessasery the finall two lines read [HINT]: Please select a valid load or ask for help! also my device isnt in a boot loop i cant get it to power on more than once a day no matter what i try, and the only way i can get it to fire up is to plug it in to my laptop i get the orange msg then its good night for the rest of the day. any help would be greatly appreciated. also im so greatful for the work you have already done its givin me hope THANK YOU FOR ALL YOUR WORK
So, i've unlocked the bootloader of the device with the steps that berkantkz posted in this forum. I've followed every step with caution, but when tried to flash the file attached to the thread of the unlocking, an error appeared. Triying to boot on the phone it stayed stuck on the boot logo
And to make the situation even worst, I tried to flash other ROM in the phone (to try to fix the problem) and now the phone don't even power on. The only thing that the phone does it's that a PC detects the phone when I conect it. I've tried the SP Flash Tool, but I've searched the entire internet and I don't find the original firmware of this phone.
Somebody can help me? Or if someone know where to get the original firmware to flash in the SP Flash Tool
Or if the only utility of the phone will be stay as a brick in a house wall
Download recovery image from this link and boot image from this link and flash them appropriately. It must come back to life then.
Addition: These images are not extracted by me. They were somehow obtained by @tormenta1026 on Telegram. Each thanks goes to him.
berkantkz said:
Download recovery image from this link and boot image from this link and flash them appropriately. It must come back to life then.
Addition: These images are not extracted by me. They were somehow obtained by @tormenta1026 on Telegram. Each thanks goes to him.
Click to expand...
Click to collapse
hello sir.
i need LG X240K Scatter File ...
please help me
This should work for you @meth raily
berkantkz said:
Download recovery image from this link and boot image from this link and flash them appropriately. It must come back to life then.
Addition: These images are not extracted by me. They were somehow obtained by @tormenta1026 on Telegram. Each thanks goes to him.
Click to expand...
Click to collapse
Hi. Didn't try it out. Had to sell the phone in the time, but thanks for the reply
RedSpikeJr said:
Hi. Didn't try it out. Had to sell the phone in the time, but thanks for the reply
Click to expand...
Click to collapse
this is so overdue hahah.
you are welcome.