Database Users

Microsoft Voice Command 1.50

When I receive a call, voice command announces it as it should, lowering the ringtone volume to announce over the top of it, problem is, it's reducing the volume too much, and I can't hear it speaking...
Does anyone know a way of:
a. Preventing voice command from lowering the volume at all?
b. Increasing the gain on voice command's announcements?
Any and all help is appreciated, thanks.

hah, when i used MS voice command my problem was that it didn't lower the ringtone enough.
I have no clue how to do what ur asking for, after a while i just turned my ringtone off and just had the announce of the name and number.

I got this CAB file from another post.
It did the trick for me.

Hi,
Start Menu->Settings->Voice Command
Choose Phone, then click Options, Remove checkbox to 'announce incoming calls'. Now your ringtone will rin normally.
--
NB

nextbond said:
Hi,
Start Menu->Settings->Voice Command
Choose Phone, then click Options, Remove checkbox to 'announce incoming calls'. Now your ringtone will rin normally.
--
NB
Click to expand...
Click to collapse
The problem is that I want the nice lady to announce the name of my caller, and I want the phone to play the ringtone I have set
MPIIIMan said:
I got this CAB file from another post.
It did the trick for me.
Click to expand...
Click to collapse
What does this cab file do? is it modification to Voice command, or is a simple registry hack?

Hello
Use any registry editor like resco and do the following
Goto current user
Then control panel
Then sound categories
Then voicecommand1
And change the atenuationcategory from 3 to 1
That will do the thing. The lady will be louder.

Theses suggestions seem to make little or no difference, the only change seems to be that the music isn't turned down as much.
I've tried manually making the changes, and running/instaling the cab file "MPIIIMan" presented me with.
Is there any way I can physically change the program to increase the gain? I don't mind if I have to dissassemble code or anything to make changes, but i'd like to get it sorted...
I'd use cyberon, but I can't find ANY working links for it on either Limewire, IRC, or any websites, either the full program or a demo... Has it dissappeared from existance???

i_am_impossible said:
Hello
Use any registry editor like resco and do the following
Goto current user
Then control panel
Then sound categories
Then voicecommand1
And change the atenuationcategory from 3 to 1
That will do the thing. The lady will be louder.
Click to expand...
Click to collapse
This worked for me. Made the lady louder - ringtone volume remained the same. Thanks.
BTW, I noticed there's another setting in that registry key called "initvol" and it's said to 5. My best guess would be initial volume? Anyone try playing with that to see what that does?

MPIIIMan said:
I got this CAB file from another post.
It did the trick for me.
Click to expand...
Click to collapse
Can you explain exactly what htis cab does, or maybe link us to its original post?

I got this cab file from another post.
You would have just as much luck finding it as I would.
I believe it's just a registry edit
[HKEY_CURRENT_USER\ControlPanel\SoundCategories\VoiceCommand1]
"AttenuationCategory"=dword:00000001
"InitVol"=dword:00000005
"Script"="p"
@=""

How to increase earpiece sound via registry???

I have tried to search but no avail, Can someone PLEASE guide me / Navigate me about how can I increase the earpiece sound.
I am using VOIP on my Diamond, the problem is that I have to plug the earpiece to listen the next person, even though the incoming voice is still soo low, I have read some time ago on this same forum that you can increase the earpiece sound strength through the registry, BUT HOW (what key, where).
I have tried the buit-in equalizer software but that seems to only work with songs not for telephone conversation.
Any help please
Regards
Sid

hi sidd u need to go to HKCU-control panel-sound categories- in call. set initial volume to 4.......

Hi there,
I would also like to have higher volume using earpiece - although up to now I thought pressing VolUp while in call was the max one could get...
Do you have more infos about these reg-settings? In SoundCategories I have:
InCall -> InitVol = 2
InCall2 -> InitVol = 5
InCall3 -> InitVol = 4
thx

hey let those values stay the same just change in call.... dont forget to soft reset....

04653 said:
hi sidd u need to go to HKCU-control panel-sound categories- in call. set initial volume to 4.......
Click to expand...
Click to collapse
Hi 04653,
Thanks for advising, I have changed the 2 to 4 as you said but can not feel any difference, can I increase more e.g. 6 ???.
Regards
Sidd

hi sidd u need to change the audio para in the windows folder. using resco or total commander copy this file into the windows folder and replace original.
note:try this is at ur own risk. worked for me so.......

04653 said:
hi sidd u need to change the audio para in the windows folder. using resco or total commander copy this file into the windows folder and replace original.
note:try this is at ur own risk. worked for me so.......
Click to expand...
Click to collapse
anyone have tryed this ?

Yes i tried, and it works good, but install the light version, because the full may brick the sound

Dr.Tenma said:
Yes i tried, and it works good, but install the light version, because the full may brick the sound
Click to expand...
Click to collapse
Is there a special version of this lite csv for diamond, or is it cross compatible with all recent devices? I'm new to Diamond.

for some reason wheni installed that audiopara file my sound went way down. i could hear on the phone ok but anything else that used the speaker wouldnt work (ie: wmplayer) i have the htc touch pro from alltel

Improvement of audio bluetooth quality

Hello all,
sorry for this post, but I am really unhappy. I did lot of research here and via Google too. Well known problem is poor bluetooth audio quality (I am using KOSS UR-40 and small SE headphones). I have new TP2 and high tones via BT are deformed (I can't stand that sound!!!)... I tried cab files from here but it doesn't work for me. (anyway - then TF3D didn't start + no improvement)
Some ideas? Please... I am very thankful for each help!!!
Some tips for regs? Some new drivers?

have you tried adding the DWORD "LineSpeed" with a value of 320 to HKLM\Software\WIDCOMM\Plugin\AV\ ?

U are clever!!! Thanks a lot!!!
sayoonarachue said:
have you tried adding the DWORD "LineSpeed" with a value of 320 to HKLM\Software\WIDCOMM\Plugin\AV\ ?
Click to expand...
Click to collapse
I did it!!! Such clear sound! So... ooooooooooh. Thanks mate! Many thanks!!!
And do you have some tip how enable equalizer on BT? (I would like to have less of bass) or how to reduce noise too - I have very sensitive ears, I hear everithyng...
Anyway, many thanks again!

how would i change this to get the better sound quality i am a noobthanks in advance

bigmike69 said:
how would i change this to get the better sound quality i am a noobthanks in advance
Click to expand...
Click to collapse
Well, you are noob - what is it in english? ) pls explain in more words ...

i cant seem to find the dword or line speed to add the value...can you walk me through it?

thanks for this solution! I was going to be pissed if i couldn't use my moto s9's on this new phone

modifying the registry / total commander
Hey j393567 ,
I found this by trial, if you use total commander & go to the directory as posted above. In Total Commander, there is an option to +add+ if you hold down / or double click on the +add+; then a new screen will pop up & ask you if you want to "Dword" . I just type in the "linespeed". Another screen will pop up & ask for a value, this is where I entered "320". This should save the new entry.
I am using a Sony/Ericsson HBH-DS205. Move up from a Fuze & now trying on the Tilt2

Im using a TP2 on verizon and cant seem to find the folder HKLM. Yes im a total noobster. Please help thank you!

yorigasi said:
Im using a TP2 on verizon and cant seem to find the folder HKLM. Yes im a total noobster. Please help thank you!
Click to expand...
Click to collapse
Here is a cab for it.
Now for the " Learn to do it on my own" Part of the post. First thing you need is a mobile reg editor. I use Total commander, But there are others. Open total commander and click on Plug ins, you will see 3 folders HKCR, HKCU, and HKLM. Click on HKLM then go to software and click there, then WIDCOMM, then Plugin, Then AV, Now click on add, Type in Linespeed in the boxes below put a dot in Dword. Click ok. A box will pop up make the value 320 and click ok. Now reboot and your done.

Thank you very much Zelendel!!!!

incall volume

hi all,
does anyone know how to raise the incall volume ?
thanks

I use the volume key to adjust the incall volume,
do you have a problem with everyone who calss or just a paticular person, cause if so it could be their phone not yours.
otherwise you could wear a hearing aid lol

pedrovki said:
hi all,
does anyone know how to raise the incall volume ?
thanks
Click to expand...
Click to collapse
These are some tweaked AudioPara3.cvs files that will boost the volume parameters. There are 3 levels to choose from, the high level will distort through the speaker so it is best not to run at 100% volume on this file.
Just copy to windows folder and replace existing.
You may want to make a copy of your original first.

Bruce Inman said:
These are some tweaked AudioPara3.cvs files that will boost the volume parameters. There are 3 levels to choose from, the high level will distort through the speaker so it is best not to run at 100% volume on this file.
Just copy to windows folder and replace existing.
You may want to make a copy of your original first.
Click to expand...
Click to collapse
thanks a lot.
i will try it .

another thing.
how can i copy those file to windows folder.
cant see it when opening through usb.
thanks

pedrovki said:
another thing.
how can i copy those file to windows folder.
cant see it when opening through usb.
thanks
Click to expand...
Click to collapse
Use Resco explorer, Total Commander or similar.

[TESTED 100% WORKING]Increase ALL of your X2's volume by 200%!!

This solution increases:
MICROPHONE VOLUME
IN-CALL VOLUME
SPEAKER VOLUME
RINGTONE VOLUME
MUSIC PLAYER VOLUME
and has been tested and working 100%
I've decided to share a ONCE-AND-FOR-ALL solution for all the X2 users and the general population of windows mobile users.
Here's the solution:
First, you need totalcommander. Google it.
1) Open TotalCommander
2) Go to ftp\\registry\HKCU
3) Change ALL the following to the value specified:
HKCU/Control Panel\Phone\vol\65535 (General volume of the X2 including microphone input!)
HKCU/ControlPanel/SoundCategories/InCall/Initvol\5
HKCU/ControlPanel/SoundCategories/Ring/5
HKCU/ControlPanel/SoundCategories/System/5
HKCU/ControlPanel/SoundCategories/Attentuation\All to 5
HKCU/ControlPanel/SoundCategories/InCall/InitVol\5
HKCU/ControlPanel/SoundCategories/Ring/InitVol\5
4) Soft-reset
5) Press the volume up key and set it to the 5th indicator (Max)
6) Press volume up key 1 more time, and you will hear an additional beep 200% louder and the indicator marker remains the same at the 5th marker on the top. This means you have sucessfully tweaked your volume!
6) Do step 5 again with in-call and congrats!
Enjoy your beloved X2 =)

I am satisfied with the default volume levels and will leave it as is.
Do note people, increasing output levels beyond the specified levels can damage your speakers!

sounds good. is it possible for someone to make a registry file of this? so we can just run it and it does it all for us noobs lol. (like the sd card fix)
although im not sure i need to increase the microphone input level, is it possible to leave that out.

Couldn't get totalcomander to work!!!! Which file did you download? It says if you have a touchscreen to download the pocket pc version...Did you download the installer or just the cab files? Thanks.

macklobell said:
Couldn't get totalcomander to work!!!! Which file did you download? It says if you have a touchscreen to download the pocket pc version...Did you download the installer or just the cab files? Thanks.
Click to expand...
Click to collapse
use some other app for registry change just google it ... this is ok for me..now l can acctually hear my phone when it is in the case in the pocket...super

royalbloodvi said:
3) Change ALL the following to value 5 in decimal
Click to expand...
Click to collapse
Hi, would you mind clarifying this value/number. In the first value my default is 65535... are you saying that this value should just be '5'. Not 55555?
thanks

tokyo78 said:
Hi, would you mind clarifying this value/number. In the first value my default is 65535... are you saying that this value should just be '5'. Not 55555?
thanks
Click to expand...
Click to collapse
leave it as 65535, corrections made.

i changed all the values you said,expcept HKCU/ControlPanel/SoundCategories/System/5
because i dont have it and nothing happends,volume is still the same.

i'm sorry but can u please make a cab file as i'm a noobie i don't want to stuff up my phone and have to do a master reset.

If your capable of making a cab file for this, trust me a lot of people will be happy and appreciate it.

If your capable of making a cab file for this, trust me a lot of people will be happy and appreciate it.

macklobell said:
Couldn't get totalcomander to work!!!! Which file did you download? It says if you have a touchscreen to download the pocket pc version...Did you download the installer or just the cab files? Thanks.
Click to expand...
Click to collapse
You dont have to use totalcommander. Since it is a registry tweak, you can use a simple Registry Editor that you can download from Windows Marketplace for free

Bro.
I think if the cab file available, it more pleasure like audiopara cab file
TQ

royalbloodvi said:
This solution increases:
MICROPHONE VOLUME
IN-CALL VOLUME
SPEAKER VOLUME
RINGTONE VOLUME
MUSIC PLAYER VOLUME
and has been tested and working 100%
Enjoy your beloved X2 =)
Click to expand...
Click to collapse
Doesn't work for me and I can't find HKCU/ControlPanel/SoundCategories/System.
Sucks, this is my only complaint with X2.

hey can you make a cab file for this registry?? much appreciated

Not working on mine!
Did not change anything noticable on mine!

michaelthemage said:
Did not change anything noticable on mine!
Click to expand...
Click to collapse
Didn't find any change.

No changes to my xperia x2 either..
I've been dealing with low volume issue of WM since my O2 atom but not for my Samsung Valencia (c6625), so I just copied all samsung's ringtones and alarms from my valencia and use it in my X2, hahaha . they are sound nicer and louder! SE could have done much much better providing us lots of (nice and loud) ringtones just like samsung did.

i have found a program that increases your volume

Many Many Many thanks to HS_LuKa_ i want to tell that the application is perfect and sound is very loud and if u receive error when run it first time just restart the phone ,
thanks again HS_LuKa_