Database Users

Updated ON Officle lollipop 5.0.2 And Facing soft brick(How to Unbrick?)

Hello guys please help me, I am On latest official lollipop . I am trying to root my device and try to install twrp recovery flash, suddenly recovery got a error:crying:, Now I am on Lollipop My stock and twrp recovery is gone, i am not able to boot into recovery option, Just Yu logo come and mobile gets switch off. I think i got soft brick my device. but i Am able to go to fastboot mode?. I hear that cant flash cm11 after cm12 update so i cant go back to cm11, Just tell me friends what to do?
- if i have to flash again stock cm12 recovery? to get recovery option? If yes then please some one provide me cm 12 stock recovery
- if i have to flash cm12 how can i flash? via flashtool? but no firmware cm12 available right now
Help Guys

reply
reply Guys please:crying:

Have a look at this thread at YU - http://forums.yuplaygod.com/threads...6-0-for-yureka-arm64-flashable-lollipop.8630/
If you can enter fastboot mode, you can simply flash the TWRP recovery and then do root your phone. You can even try factory reset and see if you can boot again into your ROM. If can't, then you would need to flash whole CM12S ROM via fastboot mode. Here is the link for the CM12S ROM to be flashed in fastboot mode only -
http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
Warning : Do not even dare to think to go back to or use anything from CM11s. Hit thanks if it helped. Good luck!

been there, and recovered.
this is what I think you need to do to recover:
download
1) dr ive .google . com/file/d/0B0_IwOvcRE4gcnNHcF9wNDcxRGs/view
2) docs. google. com/file/d/0B0_IwOvcRE4gcUpnSmVjdDAzOE0/view
3) drive. google. com/file/d/0ByDCheN6iyw0WEpveWJoTnRiWnc/view
Steps to follow:
1) extract zip (1) and (2) in the same folder
2) power off your phone completely- if in doubt, pull out and reinstall battery.
3) place zip (3) in the root of your sd card of phone, and put the sd card back into the phone.
4) connect the phone in fastboot mode, and run "flash-all.bat"
(If it asks you to unlock your bootloader, do so by following the onscreen instructions.)
5) after process is complete, power on your phone after disconnecting.
6) let it boot up for a while, say 20 mins. this step may be skipped.
7) boot into recovery mode, and click on apply update.
8) navigate to the folder with zip (3) in it, and apply it.
9) if it gives an error, wipe cache and retry.
10) after process finishes, power on phone and let it welcome you to lollipop.
cheers!

After installing "[root] CF.lumen" on YU Yureka (CM11) phone get bricked.

Hi,
After installing "[root] CF.lumen" of Chainfire on YU Yureka (CM11), phone get bricked. I did normal installation of this app, and after reboot my phone never returned normal. Each time I start, it get stuck in bootloop and all I am getting is logo of YU with Powered by Android written at the bottom of it.
I did not understand the reason of this soft brick with this application, can anybody help me to fix my YU yureka so that I can reuse it OR it just got damaged ??
So far I have tried flashing it with the following steps, but none of the methods worked: ->
Method 1: http://www.thetechnotriad.com/393/how-to-unbrick-yu-yureka/
Steps To Flash Factory Firmware –
Extract the flashtools zip in a new folder on the desktop.
Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
The command window will automatically close once the procedure is completed.
Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Method 2 : http://forum.xda-developers.com/yureka/orig-development/rom-t3042384
How To Install:
i) Place the ROM zip in the device.
ii) Reboot to your Custom Recovery CWM/TWRP/Philz.
iii) Wipe Cache, Data and System.
iv) Install the ROM Zip .
v) No need to flash Gapps, Gapps already present in system by default.
vi) The system is unrooted as its unmodified, so you might wanna install SuperSU for root access. Download and intall SuperSU.
LINK: SuperSU
vii) Reboot.
:crying::crying::crying::crying:
Please please help me to recover my phone, I would really appreciate your help.

When I flashing twrp on my phone after doing this to my phone ,my phone stuck on boot

Hi
When I try 2 install twrp on my Moto e3 power
It stuck on bootloop after flashing
Why??
I try 3 times and 3 time it stuck on bootloop
I need twrp on my stock rom .
Plzz help

Please refer to https://forum.xda-developers.com/showpost.php?p=75638300&postcount=6
If still stuck on bootscreen - You flashing wrong twrp.img
Please enter the build number and model number [ XT1700, XT1706] - then it will be easier to help

I think I flash right twrp
XT1706
Bro after fastboot flash recovery recovery.img
Commund how 2 boot my phone

Ankur 12 said:
I think I flash right twrp
XT1706
Bro after fastboot flash recovery recovery.img
Commund how 2 boot my phone
Click to expand...
Click to collapse
is it still in bootloop?
if yes then follow the steps:
1. Open device in fastboot mode.
2. in the adb and fastboot command promp type command (fastboot --wipe).
3. Then reboot your phone using the power button.
that's it now your phone should boot up with the device unlocked warning.

No now it is not
I flash stock rom by spflash tool
But please tell me the full process
I can't want to install other rom,I know after installing
Twrp it goes bootloop and I can fix it by flashing other rom
I just want to root my phone in stock rom only but in stock rom its not possible I thik ?
Any I tried all method like wipe data , catch etc. But it not working and my phone stuck on bootloop
Bdwy thnxx for ur reply ☺

Ankur 12 said:
No now it is not
I flash stock rom by spflash tool
But please tell me the full process
I can't want to install other rom,I know after installing
Twrp it goes bootloop and I can fix it by flashing other rom
I just want to root my phone in stock rom only but in stock rom its not possible I thik
Any I tried all method like wipe data , catch etc. But it not working and my phone stuck on bootloop
Bdwy thnxx for ur reply
Click to expand...
Click to collapse
Hey bro, if u want to root your stock rom then you may try to install twrp first.
1) Download twrp from here( must)
https://drive.google.com/file/d/1-mtyht5qMqFFpgpmQCADvODat_FgtwDv/view?usp=drivesdk
2) Then unlock oem. If already unlocked then ignore this step.
3) After unlocking oem commands.
Rum commands to install the downloaded twrp. "Fastboot flash recovery file_name.img"
4) Now, run command to erase userdata and cache. "Fastboot --wipe". If the command fails to wipe the data then go to next step.
5) Then press and hold power button + volume up button both at same time for opening bootloader menu. Select recovery mode from there.
6) if twrp opens then well and good. Then Restart your phone in fastboot mode using twrp .
7) erase data (see 4 point).
8) restart your phone using power button. Now the problem of bootloop is solved.
Please Follow steps strictly with ease..
If twrp flashing successfull or bootloop problem solves then tell me. I will tell you the steps to root stock rom.

Ok

Ankur 12 said:
I think I flash right twrp
XT1706
Bro after fastboot flash recovery recovery.img
Commund how 2 boot my phone
Click to expand...
Click to collapse
Just remove the battery, insert it back in and reboot.
That what I did and it worked:good:

Ankur 12 said:
No now it is not
I flash stock rom by spflash tool
But please tell me the full process
I can't want to install other rom,I know after installing
Twrp it goes bootloop and I can fix it by flashing other rom
I just want to root my phone in stock rom only but in stock rom its not possible I thik
Any I tried all method like wipe data , catch etc. But it not working and my phone stuck on bootloop
Bdwy thnxx for ur reply
Click to expand...
Click to collapse
bro, whick stock rom you flashed?

https://firmware.center/firmware/Motorola/Moto E3 Power (Lenovo XT1706)/Stock/
This one

Hi Guys,
The same is happening to me.
My moto e3 power was working fine. But one day, the signal strength was getting low and internet was not working. So I decided to root and install a custom rom. I unlocked the boot loader. Tried to install twrp. But I am failing at this step. When I try to install twrp via fastboot, it succeeds and when I open recovery twrp is there, but it automatically reboots and gets stuck in a boot loop.
I fixed the boot loop by installing a stock rom via SP flash tool.
However I tried again to root and failed again. This time also used SP flash tool to install Stock ROM. Ended up getting Invalid IMEI error.
I tried frama root, king root, kingo root and nothing works!
Btw, I do have experience in rooting. I used more than 10 custom roms on my lenovo k6 power

Stuck in a boot loop and can't access recovery mode

So I flashed a custom rom and it required a specific TWRP recovery. But after installing the custom rom I had to install another TWRP recovery otherwise it wouldn't boot into OS (this recovery was probably unsupported and thus my phone was forced to boot into OS)
So every time I wanted to boot into recovery mode I had to use an app like flashify and flash the first recovery to boot into recovery mode. And after finishing I had to flash the "unsupported" recovery again in order to boot into OS.
Now with the "unsupported" recovery, I installed Xposed and some modules and then restarted the device. And..........boom! The phone is stuck in a boot loop! And I can't even boot into recovery mode.
Now here's the other nightmares I'm getting:
1. Cant use ADB to flash a new recovery because my device is "unauthorized" and in order to fix that I need to go to developers option which is not possible (because of boot loop)
2. Uninstall Xposed: button combinations aren't working and I cant go to recovery mode to flash the uninstaller zip
3. vol up + vol down + power button doesn't open recovery because the recovery is "unsupported"
4. Can't even boot to fastboot mode by holding vol down + power. It tries to boot into OS and starts boot looping
5. Can't use sp flash tool to flash stock rom or recovery because whenever I connect the phone to PC, the phone tries to boot into OS and....you guessed it starts boot looping.
Now I'm out of ideas and really depressed. If anyone can help me out with this I'll be grateful forever.
My device is: Lenovo k4 note
Chipset: MediaTek MT6753
Currently on this recovery: https://androidfilehost.com/?fid=673368273298981920
Got this recovery from here (recovery2): https://forum.xda-developers.com/k4-note/development/unofficial-resurrection-remix-5-8-2-t3570195
Thanks!

Update: The problem is solved after flashing stock rom via sp flash tool

Can you please help me im havifng the same problem
scarecow47 said:
Update: The problem is solved after flashing stock rom via sp flash tool
Click to expand...
Click to collapse
I think the pc cant dtect my device same problem bro after installing new rom it keeps on rebooting after the lenovo logo. Cant also access the recovery mode. Please help me

Bro I'm not an expert. Someone from XDA discord server helped me with this. And I actually forgot the exact thing I did to be honest. I downloaded the sp flash tool on pc and downloaded the stock rom. Then flashed it to the phone. You have to connect your device via USB before. For a detailed guide you can search on YouTube with something like "how to flash stock rom via sp flash tool"
Or ask in the discord server. They will surely help you.

How did you flash that? Can you please explain step by step

Check this link: https://firmwarefile.com/lenovo-k4-note-a7010a48
You can download the stock rom from here. And there is also a tutorial on how to flash it. I followed it. Hope that helps!

scarecow47 said:
Check this link: https://firmwarefile.com/lenovo-k4-note-a7010a48
You can download the stock rom from here. And there is also a tutorial on how to flash it. I followed it. Hope that helps!
Click to expand...
Click to collapse
Thanks, the problem is my phone is struck on the Lenovo logo, it's not turning off but my computer deducted it as Lenovo device

If ADB can detect your device then you can just flash a new recovery and you should be fine. But as I said I'm not an expert so I'd suggest you to ask for help on the XDA discord server. That's where I got help from.

Did anyone found the solution?
Thanks

Can any one find the solution of that problem , because my lenovo k4 note also stuck on boot looping logo... and vibrate like bootup time

Help stock on logo cant go to twrp

HELP , I am stock stuck on logo after I flash panadriod rom now I have flashed pda twrp but twrp is not opening stuck on logo only , I am on fastboot please help flashing twrp but not booting

farhan20 said:
HELP , I am stock stuck on logo after I flash panadriod rom now I have flashed pda twrp but twrp is not opening stuck on logo only , I am on fastboot please help flashing twrp but not booting
Click to expand...
Click to collapse
1. Obviously you need to have your phone bootloader unlocked and enabled USB Debugging.
2. Connect your phone to PC
2. Reboot to Fastboot using Volume Down+Power button
3. On your PC, navigate to the 4PDA TWRP folder
4. Start the Flash_TWRP.bat file (as Administrator just to be sure)
5. Follow the instructions in the CMD window
6. After TWRP Flash, reboot into recovery (Press Volume up Button+Power button)
in TWRP format data
reboot to twrp again in recovery
7. Flashe your Rom of choice
8. Rebooted and let the ROM load (have patience, first time takes pretty long!)
9. Follow and complete setup