I had a RAZR M xt907 on 4.1.2 and I was trying to update it through RSDlite to unlock its booloader, unfortunately no version of rsdlite could detect my phone. So i went ahead and tried to update it by mfastboot flashing (NON-HLOS.bin,boot.img,system.img,recovery.img).
Now the phone won't move past setup wizard, the touch is not responding there.
The phone is low on battery and I have tried everything short of opening up my phone to get it to charge.
Can someone please help me?
***EDIT*** SOLVED http://mrbluecoat.blogspot.com/2014/07/tutorial-restore-verizon-droid-razr-m.html
Related
OK, so I have a D2 that someone gave me. It was completely stock (not rooted), but had all of their stuff on it still so I decided to do a factory restore through the android menus. The process started and the phone got stuck at the "M" logo, I left it for a few hours, and never budged.
I can NOT get into recovery, holding "X" and power on battery or connected to USB does nothing, have tried about 50 or 60 times now.
I can get to the bootloader and flash a new sbf (tried 2.3.20, 2.2.20, and downgrading the bootloader to d2.35) aside from the d2.37 bootloader I don't know of any other sbf's to try untill the GB one leaks, and who knows when that will be. I am using RSD lite 4.9 on win 7 x64, and 2.3.20 does not error out, also it identifies the phone as "s flash omap..." something instead of A955 or droid.
Sorry for the lengthy post, any help would be appreciated.
Edit: I tried flashing the 2.3.20 sbf from an ubuntu live CD with no joy. I just don't understand, i'm not getting any errors with ADB, it completes just fine, so recovery should be there for me to go into. The better part of 2 days trying to figure this out now.
Just a quick question, is recovery included in 2.3.20 full sbf?
Try it on a different computer. That worked for me. S flash is OK. As long as it says connected, you're good. You need to sbf. As long as you can get into Bootloader (2. 37)you can sbf.
Sent from my DROID2 using XDA App
That was the next thing I was going to try, need to get an OS on my old laptop to try, I have been busy so I should get to that sometime before the weekend. Dug out an old OG Droid that had the same issue that I could never figure out too, and got a custom recovery flashed, but no success on the full SBF or restoring a backup. Hopefully it is just this PC that is not playing nicely.
Thanks for the suggestion.
You can't get into recovery after you SBF? Is that what you mean?
wrichards2009 said:
You can't get into recovery after you SBF? Is that what you mean?
Click to expand...
Click to collapse
Exactly, it's like recovery is not there. Powering up while holding X does nothing, all I get is the "M" logo. I've let it sit and eat a whole battery just sitting on the "M". I will try to flash on another computer or two tonight and post my results.
Well I finally had time to try on another computer, and no luck. Used a freshly downloaded SBF, moto drivers and RSD Lite 4.8. Also I hadn't thought to check the logs before, and the FlashErrorLog has 4 errors, ERROR: AP Die ID, BP Die ID, AP Public ID and BP Public ID.
Everything went same as before, RSD completes with no errors. (well almost completes when I use my Motorola branded cord, stops at rebooting phone, and with my wifes LG branded cord, it reboots into the bootloader automatically, strange)
If anyone else has any ideas, I'm just at a complete loss here, willing to try something drastic at this point.
Having a similar problem, so hope you don't mind me piggybacking on your thread. I'm running 2.3.3 rooted on my D2, and I cannot boot into recovery either, but also can't get SBF to recognize my device on any computer. Any ideas?
How to get into Clockwork Mod
Is there a way to enter Clockwork MOD recovery on a rooted phone Manually? I am away from a computer, phone seems to be bricked need to get into recovery MANUALLY ...................
Hello everyone!
I wanted to flash my milestone 2 with the 2.3.4 sbf file but during the process, an error occured and now, my phone is booting by himself in bootloader mode. I've got this message telling me that the code is corrupted and when i try to flash it using RSD lite, the phone is detected but the process fails every time.
I've looked a bit around on google and the only solution that i found is to boot in OpenRecovery but i can't boot with anything else than Bootloader...
If you have any ideas, i'll be happy to read them. =)
You should probably flash/reflash a Milestone 2 specific SBF file.
Sent from my Transformer TF101 using XDA App
I managed to flash my phone with a 2.2 SBF file but at the end of the process, RSD lite send a message telling me to reboot it manualy. The thing is that now, i can't even turn it on and it's not recognised anymore by my computer...
goeland64 said:
I managed to flash my phone with a 2.2 SBF file but at the end of the process, RSD lite send a message telling me to reboot it manualy. The thing is that now, i can't even turn it on and it's not recognised anymore by my computer...
Click to expand...
Click to collapse
It sounds like the battery got too low. Try using a different battery.
Sent from my DROIDX using XDA App
or by a $5 battery charger from amazon
The battery won't charge but the thing is that just before flashing with the 2.3.4, i had about 50% battery so technicaly, i should have some. I'll try with another battery, i hope it will work. =)
Im using Atrix MB861 Korea version
I has been using it for couple of weeks, it is rooted
i never flash any rom or doing anything related rom
this morning i notice when going SETTING > ABOUT > UPDATE, it has something to update so i downloaded it and it automatically install
but i stuck at '' failed to boot 2 starting rsd mode'' forever
i pull out the battery, it reboot and update and stuck at '' failed to boot 2 starting rsd mode'' again
i did pull out battery several times and still face that problem
anyone please help me, i have not back up my phone yet, i dont wanna lose my data (
help me plz, any comment would be appreciated
Use rsd lite to flash a sbf file that corresponds to your phone, you can find it in the firmware thread in the dev sectiom
Sent from my MB860 using xda premium
I need help..
I have a Droid 2 R2D2
I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.37
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
I have tried several sbfs and nothing changed
sbfs：1FF-p2a_droid2_cdma_droid2-user-2.3.3NoRadio.sbf
VRZ_A955_2.3.20_1FF_01.sbf
VRZ_A957_2.4.5_1FF_01.sbf
What can i do??
I have saved the phone
using 1FF-p2a_droid2_r2d2_cdma_droid2_r2d2-user-2.3.4-4.5.1_57_DR4-52-120118-release-keys-signed-Verizon-US.sbf
Buy a new phone
supergear said:
Buy a new phone
Click to expand...
Click to collapse
Thanks!
OP, Thanks for pointing me at a 2.3.4 sbf file to fix this problem. It worked for me too. I have a non-r2d2, so I got:
1FF-p2a_droid2_cdma_droid2-user-2.3.4-4.5.1_57_DR4-51-120117-release-keys-signed-Verizon-US.sbf
but that solved the Err:A5,70,00,1F problem and got my phone right back working like normal. Sadly, no root options for me currently.
It's interesting to note that RDS Lite reported that flashing failed, even though it obviously succeeded. When it rebooted, it showed the Motorola logo instead of going back to the flash loader and then everything was fine.
Hey there!
My beloved Droid R2D2 seems to be ailing in the form of being bricked. Nothing happened to it, it just decided that today (really three days ago) was a good day to get stuck in Bootloader on infinite loop. The battery is fully charged, whenever I turn on the phone it goes to:
Bootloader
D2.37
Battery OK
OK to Program
Connect USB
Data Cable
I can get into both Recovery and Bootloader the normal way (I've tried wiping my cache and setting it back to factory settings already) but can't seem to get to anything else.
I tried SBFing it using RSDLite v5.6 with the most recent drivers installed and the SBF file from the lovely droid developers site (specifically the 2.3.4 version). It gets to 100%, the phone restarts, but then I'm presented with the message:
Error switching phone to BP Pass through mode (0x70BE); phone connected
and a big FAIL in the Result box.
I've been looking all over for solutions so I wouldn't have to post this, but it seems everyone else has errors or corrupted codes with their bootloader, whereas mine seems to think it's okay.
I absolutely adore this phone and am by no means ready to give it up (they've even stopped producing them so any new phone would have to be a plain old regular Droid2...), so any help would be unbelievably appreciated!
http://droid.koumakan.jp/wiki/SBF
Note: Under certain circumstances (especially when using Windows Vista and Windows 7) there might be a problem with not all device drivers being installed correctly. In such case, the flashing process will abort, and your phone won't be able to boot normally. RSDLite shows the following error message:
Error switching phone to BP Pass through mode
To get around this issue, once you get a Device driver could not be installed message from Windows, don't close RSDLite nor power off the phone. Start Motorola Driver Installer once again, and let it finish. Then if RSDLite didn't timeout yet, head to Device Manager, find the Unknown device, and in its properties' Driver tab click Update driver…. It should now install normally. If RSDLite timed out and you got an error from it, just repeat the SBF process. The driver should now be present, and the flashing process will finish normally.
Once the flashing process is complete, RSDLite will tell you to “power the phone up manually”. In most cases you won't be able to do this straight as instructed: the phone will be bootlooping. Take the battery out, and then place it back in. Press the lock/power button: the phone should boot normally.
Close RSDLite. Disregard the warning about flashing not being completed since your phone has already booted into Android.
In case you still get bootloops after pulling the battery, refer to Android Recovery.
Click to expand...
Click to collapse
if you still no luck, to ezSBF
http://www.droidforums.net/forum/droid-2-hacks/161849-tool-ezsbf.html
Ah! ezSBF worked! This is both wonderful and unfortunate (I ordered a droid 4 to replace my phone deciding it really was dead so now I have to figure out whether to switch to the 4 or send it back for a few more months in the hopes that its price goes down a bit more...) but mostly really good to see old R2 alive and well again. Thanks!
ezsbf has helped a lot of people
Sent from my MB870 using xda premium
so i have a questions. i got mine rooted and deleted something i shouldnt have deleted. so i sbf back to stock. its says that the flash was successful but my r2d2 keeps bootlooping. any ideas
Which sbf did you flash?
Sent from my DROID2 using Tapatalk 2
did you try wiping cache or data?
delete this
jwagman1 said:
delete this
Click to expand...
Click to collapse
you decide to to read the thread? like 4 posts up