merhaba, s7390 cihazıma root atıp twrp ile custom rom yüklemiştim beğenmedim değiştireyim dedim tel brik oldu stock rom ile eski haline getirdim tekrar root yapıp twrp çalıştırdım ama açılmıyor şimdi ne yapmalıyım odinde aldığım hata mesajı şu şekilde <ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7390XXUANI1_S7390OJVANG3_S7390XXUANI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
all samsung recovery ile de reset attım tel firmware upgrade encountered an issue ekranıyla açıldığında yeniden başlatınca açılmıyor sol üstte de kırmızı bi küçük nokta geliyor servise götürmem gerekir mi ? teşekkürler biraz uzun oldu ..
Related
Hello!
I just update my n900 to android 4.4.2 (Rusia) and it get installed OK, but when i download the CF AUTO ROOT method to root the device as i did with 4.3 it stuck in the "cache.img" and after a few minutes it gives me an error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-ha3g-ha3gxx-smn900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am using all the correct files and when i reflash 4.4.2 it works fine, but not root
Any idea?
yamwt said:
Hello!
I just update my n900 to android 4.4.2 (Rusia) and it get installed OK, but when i download the CF AUTO ROOT method to root the device as i did with 4.3 it stuck in the "cache.img" and after a few minutes it gives me an error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-ha3g-ha3gxx-smn900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am using all the correct files and when i reflash 4.4.2 it works fine, but not root
Any idea?
Click to expand...
Click to collapse
Use this method http://forum.xda-developers.com/showthread.php?t=2614787
hello
my problem is when i flash a stock rom by odin it's stack on sboot.bin
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUGNH2_I9500OJVFNG1_I9500XXUGNF6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> __XmitData_Read ..
<ID:0/006> XmitData Fail..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
i tried many roms and many odin and i try to use another pc but it's the same problem
so what i will do now
my phone is galaxy s4 i9500 i'm using a custom rom miui v5
---------------------------------------
| finally it's solved ) thank u |
---------------------------------------
how fixed??
but how?? was that because of secure boot????
hi i have N910F andi try to root my divase wite : http://download.chainfire.eu/568/CF-Root/CF-Auto-Root-trlte-trltexx-smn910f.zip
when i flash it i got fail .
after i removed the battery i got : firmware upgrade encountered an issue. please select recovery mode .
and when i try to flash my stok room i got agen fail .
my room is : http://www.sammobile.com/firmwares/download/44446/N910FXXU1BOC3_N910FTPD1BOC1_TPD/?hc_location=ufi
and i use Odin_v3.07 .
and the masege i got is :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910FXXU1BOC3_N910FTPD1BOC1_N910FXXU1BOC3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
thanx !
i have good news , i try to write another stock rom with new odin and i success !!!
Hi, i am new, and noob.
I have this sm-G7105L, i upgraded it to 4.4.2,at first i flash with G7105LUBUBOD1_G7105LCHXBOD1_CHX, and i can not root my cellphone, there is this message from SU "supersu there is no su binary installed and supersu cannot install it. this is a problem". I tryed a lot of things to root it, but no succeed.
Another thing that i was not able to flash the recovery CWM, i tried several times. I start in recovery mode and the cellphone turns into Download Mode, and the message is something like the phone is unable to boot in recovery mode.
Now, i thought that may be we can go back to 4.3, but i did no backup, and my kernel updated too.
Then, i tried to flash this AUT-G7105XXUBNI2-20140926180119 (SWITZELAND), but Odin says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7105XXUBNI2_G7105AUTBNI2_G7105XXUBNI2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
is there some firmware you can recommend me that would work for me?
Or may be someone can root this one.
help!
Please somebody help me!!!
Pregunta hablo español
Como hiciste para meterme una recovery modificada al g7105L yo no he podido y to puedo ayudarte con tu problema
sanum988 said:
Please somebody help me!!!
Click to expand...
Click to collapse
Dont flash G7105 firmware. Its because that is different hardware. Flash the latest and your region G7105L firmware.
roted my grand prime once and un root it but now icant do stock fimware on it pls help
the odin says like this
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
anaskonnengal said:
roted my grand prime once and un root it but now icant do stock fimware on it pls help
the odin says like this
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
pls help
Which firmware did u use? It must same firmware on your phone to flash.
anaskonnengal said:
pls help
Click to expand...
Click to collapse
Did You use check on Samsung site for newest Rom ? For your region of course.
extraing new md5 file ; and try flash odin