Related
Hi Guys,
I'm Kinda new about making a new thread, so if anything's wrong let me know.
Just last evening my nexus 6p (on Android 7.0 official) got into a boot loop from a normal state. It just boots & right after when the white google logo transforms into 4 round object, it just reboots (it takes about 3-5 secs). I can access the boot loader but was unable to access to recovery from there as that takes it to bootloop again. I've tried flashing it, but since i had already updated to Nougat official version & the official image for 6p is yet to come, i tried with some earlier version of Marshmallow. but that failed as well. can it be that i need to select the right version of factory image as i really do not remember my old marshmallow versions anymore.
It seems i'm out of options right now. :crying:
Any advice guys??
TIA
Found this on Nexus 6p help forum. Haven't tried it though so I'm unable to confirm if it works or not.
https://productforums.google.com/forum/#!topic/nexus/hdrNONCCoNE
@sirluigi, this EXACT thing just happened to me ..
stock nougat, only bootloader unlocked ((( and since I've got no access to recovery and no Nougat image, I don't know what to do next
minicoop7, unfortunately, for that guide I need to go into recovery mode
ciocu said:
@sirluigi, this EXACT thing just happened to me ..
stock nougat, only bootloader unlocked ((( and since I've got no access to recovery and no Nougat image, I don't know what to do next
minicoop7, unfortunately, for that guide I need to go into recovery mode
Click to expand...
Click to collapse
Have you tried using fastboot to temp boot to recovery?
fastboot boot twrp-3.0.2-1-angler.img
downloading 'boot.img'...
OKAY [ 0.409s]
booting...
OKAY [ 0.680s]
finished. total time: 1.097s
Click to expand...
Click to collapse
same behavior, nothing but a bootloop
I'm dowloading an official MM image, just to get the stock recovery and see if I can temp boot in it
edit: not possible, I even tried to flash twrp, I tried flashing stock recovery from MTC20F.. tried to temp boot in both, all with no luck and with phone constantly alternating between the "Your device cannot be checked for corruption" screen and the white Google screen with the open lock.
sirluigi said:
Hi Guys,
I'm Kinda new about making a new thread, so if anything's wrong let me know.
Just last evening my nexus 6p (on Android 7.0 official) got into a boot loop from a normal state. It just boots & right after when the white google logo transforms into 4 round object, it just reboots (it takes about 3-5 secs). I can access the boot loader but was unable to access to recovery from there as that takes it to bootloop again. I've tried flashing it, but since i had already updated to Nougat official version & the official image for 6p is yet to come, i tried with some earlier version of Marshmallow. but that failed as well. can it be that i need to select the right version of factory image as i really do not remember my old marshmallow versions anymore.
It seems i'm out of options right now. :crying:
Any advice guys??
TIA
Click to expand...
Click to collapse
Guys its very simple, flash the stock mtc20f image first. After that boot it, it wont work but don't worry. Onece it bootloops go into bootloader and fastboot flash twrp 3.0.2-0. once thats done boot into twrp recovery. Onece in twrp make a backup of the image you just flashed that don't work. Once thats done mount system in recovery. Once mounted plug phone into computer and open the twrp folder you will see on your internal wich will have the backup that you just made. Transfer an old working backup into that folder that way twrp will recognize that backup. Once the backup is in the folder you shoukd see 2 backups in there, your new one that doesn't boot and your old one that does work wich you just put into the twrp folder. Once done go to restore and restore the backup of the working rom you just put in there, make sure to check off all on restore. Once done reboot system and it should boot. This will only work if you have a backup of an old working rom.
---------- Post added at 01:13 AM ---------- Previous post was at 01:00 AM ----------
sirluigi said:
Hi Guys,
I'm Kinda new about making a new thread, so if anything's wrong let me know.
Just last evening my nexus 6p (on Android 7.0 official) got into a boot loop from a normal state. It just boots & right after when the white google logo transforms into 4 round object, it just reboots (it takes about 3-5 secs). I can access the boot loader but was unable to access to recovery from there as that takes it to bootloop again. I've tried flashing it, but since i had already updated to Nougat official version & the official image for 6p is yet to come, i tried with some earlier version of Marshmallow. but that failed as well. can it be that i need to select the right version of factory image as i really do not remember my old marshmallow versions anymore.
It seems i'm out of options right now. :crying:
Any advice guys??
TIA
Click to expand...
Click to collapse
OMG I finally got mine to work
I'll note down the exact steps , most of which may or may not be relevant
1) Flashed MTC20F using TWRP 3.0.2-1
2) Booted into recovery and wiped everything and the partitions
- Add - Booted back into twrp 3.0.2-1 and then swiped to allow modifications
3) Then fastboot flashed TWRP 3.0.2-0
4) Restored my backup ( except recovery)
5) Still got stuck in the google screen.
Now the next parts are a bit weird
6) Booted into TWRP, flashed vendor.img from pure nexus rom
7) wiped everything except internal storage
8) Flashed vendor.img, pure nexus rom and gapps and then flashed vendor.img again
9) Rebooted and it worked
Let me know if it worked for you guys or if you need any more help
disbeyad999989 said:
Guys its very simple, flash the stock mtc20f image first. After that boot it, it wont work but don't worry. Onece it bootloops go into bootloader and fastboot flash twrp 3.0.2-0. once thats done boot into twrp recovery. Onece in twrp make a backup of the image you just flashed that don't work. Once thats done mount system in recovery. Once mounted plug phone into computer and open the twrp folder you will see on your internal wich will have the backup that you just made. Transfer an old working backup into that folder that way twrp will recognize that backup. Once the backup is in the folder you shoukd see 2 backups in there, your new one that doesn't boot and your old one that does work wich you just put into the twrp folder. Once done go to restore and restore the backup of the working rom you just put in there, make sure to check off all on restore. Once done reboot system and it should boot. This will only work if you have a backup of an old working rom.
---------- Post added at 01:13 AM ---------- Previous post was at 01:00 AM ----------
OMG I finally got mine to work
I'll note down the exact steps , most of which may or may not be relevant
1) Flashed MTC20F using TWRP 3.0.2-1
2) Booted into recovery and wiped everything and the partitions
- Add - Booted back into twrp 3.0.2-1 and then swiped to allow modifications
3) Then fastboot flashed TWRP 3.0.2-0
4) Restored my backup ( except recovery)
5) Still got stuck in the google screen.
Now the next parts are a bit weird
6) Booted into TWRP, flashed vendor.img from pure nexus rom
7) wiped everything except internal storage
8) Flashed vendor.img, pure nexus rom and gapps and then flashed vendor.img again
9) Rebooted and it worked
Let me know if it worked for you guys or if you need any more help
Click to expand...
Click to collapse
Unfortunately, this didn't work for me.
I believe you should be fine with just trying to flash an earlier recovery version using fastboot... if you're trying to save your data and then factory flash MM and then restore your data to the phone, you should be able to use fastboot pull and then copy them back once you've got a working device by simple copy from windows.
disbeyad999989 said:
Guys its very simple, flash the stock mtc20f image first. After that boot it, it wont work but don't worry. Onece it bootloops go into bootloader and fastboot flash twrp 3.0.2-0. once thats done boot into twrp recovery. Onece in twrp make a backup of the image you just flashed that don't work. Once thats done mount system in recovery. Once mounted plug phone into computer and open the twrp folder you will see on your internal wich will have the backup that you just made. Transfer an old working backup into that folder that way twrp will recognize that backup. Once the backup is in the folder you shoukd see 2 backups in there, your new one that doesn't boot and your old one that does work wich you just put into the twrp folder. Once done go to restore and restore the backup of the working rom you just put in there, make sure to check off all on restore. Once done reboot system and it should boot. This will only work if you have a backup of an old working rom.
---------- Post added at 01:13 AM ---------- Previous post was at 01:00 AM ----------
OMG I finally got mine to work
I'll note down the exact steps , most of which may or may not be relevant
1) Flashed MTC20F using TWRP 3.0.2-1
2) Booted into recovery and wiped everything and the partitions
- Add - Booted back into twrp 3.0.2-1 and then swiped to allow modifications
3) Then fastboot flashed TWRP 3.0.2-0
4) Restored my backup ( except recovery)
5) Still got stuck in the google screen.
Now the next parts are a bit weird
6) Booted into TWRP, flashed vendor.img from pure nexus rom
7) wiped everything except internal storage
8) Flashed vendor.img, pure nexus rom and gapps and then flashed vendor.img again
9) Rebooted and it worked
Let me know if it worked for you guys or if you need any more help
Click to expand...
Click to collapse
Can you elaborate the steps pls? also have you had an earlier back up of your phone which i don't have?
Has anyone been able to get this to work without being able to get into TWRP? I can't get into recovery whether it is a temp boot to it, or fastboot flash either version..
I have compiled a list of the 20+ methods from various users in THIS thread. It's the second post.
Stuck in a bootloop still @tr4nqui1i7y but will try your methods as well... Fingers crossed..
So I do not if this may help anyone who as run into this issue but still may want to retrieve their data before formating their data or factory resetting. While running TWRP 3.0.3 and flashing the latest 7.1.1 files for angler. I would sometimes be able to boot into the recovery like 3/10 tries ( from the bootloader menu). My data was encrypted and it woul freeze constantly when trying to decrypt soo i decided once I finally got it to boot again in the recovery menu(TWRP after hours mind you) I let the phone stay idle for a few mins should the cpu would cool down that my battery percentage would drop around 41% and the tried to decrypt data which went tru successfully. I retrieve what I Could and it froze during a process of a nandroid backup and started bootlooping again. I believe the battery percentage may be linked to the early shutdown issues that many user were reported having and the bootloop of death we are experiencing. Hopefully this info may help someone else.
I purchased a used Nexus 6p from ebay. I've unlocked the bootloader and installed TWRP. When I boot into recovery, I get a screen that's titled, "Mount Decrpt Data". It wants me to enter a password. I don't have the password. What are my options?
I want to root the phone and install custom ROMs.
@msmcintosh- The 6P defaults to data encryption on first boot. You need to do a factory reset and before booting to the OS install TWRP and then boot back into TWRP (reboot recovery). If you want to keep your data unencrypted you now have to either flash SuperSU or a custom kernel. Either of these will disable the force encrypt flag. Also make sure you are installing v3.1.1.0.
v12xke said:
@msmcintosh- The 6P defaults to data encryption on first boot. You need to do a factory reset and before booting to the OS install TWRP and then boot back into TWRP (reboot recovery). If you want to keep your data unencrypted you now have to either flash SuperSU or a custom kernel. Either of these will disable the force encrypt flag. Also make sure you are installing v3.1.1.0.
Click to expand...
Click to collapse
I managed to screw it up. I'm stuck at the Google screen. I can boot into TWRP. I had tried to install Pure Nexus, GApps, Magisk and Franco kernel, but obviously didn't do it correctly. How can I recover my phone?
Uppdate: I download and installed the Oreo factory image and flashed it. Then TWRP. Now to figure out what went wrong flashing Pure Nexus. I'm coming from a nexus 6.
msmcintosh said:
I managed to screw it up. I'm stuck at the Google screen. I can boot into TWRP. I had tried to install Pure Nexus, GApps, Magisk and Franco kernel, but obviously didn't do it correctly. How can I recover my phone?
Uppdate: I download and installed the Oreo factory image and flashed it. Then TWRP. Now to figure out what went wrong flashing Pure Nexus. I'm coming from a nexus 6.
Click to expand...
Click to collapse
I keep screwing this up. I have TWRP, factory Oreo, rooted with Magisk. I made a backup in TWRP. I per Pure Nexus instruction, I installed the Vendor image, Pure Nexus ROM, GApps and Magisk. The system won't boot. Gets stuck at the Google screen. Can't boot into TWRP either. I can reflash TWRP, but the backup is no good (gets stuck at Google screen). I end up reflashing the factory image and TWRP. Then it will boot into Android.
I'm not sure what I'm doing wrong. It was easy to do this on my Nexus 6.
msmcintosh said:
I keep screwing this up. I have TWRP, factory Oreo, rooted with Magisk. I made a backup in TWRP. I per Pure Nexus instruction, I installed the Vendor image, Pure Nexus ROM, GApps and Magisk. The system won't boot. Gets stuck at the Google screen. Can't boot into TWRP either. I can reflash TWRP, but the backup is no good (gets stuck at Google screen). I end up reflashing the factory image and TWRP. Then it will boot into Android. I'm not sure what I'm doing wrong. It was easy to do this on my Nexus 6.
Click to expand...
Click to collapse
Not sure what you are doing wrong with the clean PN install, but you can't downgrade from O to N by flashing an older PN ROM. You may get more specific help in the dedicated PN install thread by nathanchance.
v12xke said:
Not sure what you are doing wrong with the clean PN install, but you can't downgrade from O to N by flashing an older PN ROM. You may get more specific help in the dedicated PN install thread by nathanchance.
Click to expand...
Click to collapse
I ended up flashing Nitrogen O, which worked. Thanks.
I have a US Oneplus2 that is stuck on the animation when it boots. I can get into TWRP and Fastboot, latest TWRP works and can also use an older version that I had.
I made a TWRP backup that I pulled off onto another computer. I then installed OOS 3.5.1 (I think) to do some testing. Once I was done testing, I decided I wanted the latest lineage as my backup was a 6 month old version of the latest at that time. I used TWRP to wipe the data, cache, and system to then install the latest Lineage 14.1 11/24/17 and gapps mini and micro (tested both). It gets to the lineage boot animation and the ball goes back and forth forever. I have left it over night and it's still going. I have rebooted the device, installed lineage several times, moved to 12/1/17 today with the same results.
After messing with it for hours and days, I decided to just put the TWRP backup back on the phone and then update from there. Well... my custom animation is load but the animation is also going forever.
Looking for some help on what might be wrong with the phone, thanks.
Make sure everything is formatted as ext4 and update firmware to 3.6.1 just to rule it out.
I would use the latest twrp.
I go to format tick all the boxes and clear everything then go to reboot > recovery. Once back in twrp copy the ROM and gapps across from pc install ROM and gapps together, wipe cache and dalvik reboot.
I'm in the process of doing that now.
The TWRP that I'm using is 3.1.1-0 which looks to be the latest. I am working with OOS 3.5.8 but will look at downloading 3.6.1. I am working to get Lineage 14.1 on there once everything is stable.
I ran into another weird is when using the qualcomm recovery tool:
My method is to enable ADB, enable OEM Unlock, enable Advanced Reboot.
Reboot into fastboot
Fastboot oem unlock: is successful
Fastboot reboot
I then go through renabling ADB and Advanced Reboot, OEM Unlock is still enabled.
I then reboot into fastboot
Fastboot flash recovery twrp-3.1.1-0-oneplus2.img
This completes successfully and then I fastboot reboot.
I have tried several times to get into TWRP but I keep getting the stock recovery.
I have tried to reflash recovery but nothing ever changes.
Is there possibly something wrong with the OEM unlock that says it was successful?
How do I go about troubleshooting this?
Ok, I fixed that and install OOS 3.6.1 and then was able to install TWRP 3.1.1-0.
I then wanted to install Lineage 14.1:
I then formatted Cache, System, Data, Dalvik... everything but internal. Should I wipe internal as well?
I copied over linage 14.1 and open_gapps for the same build micro.
I now am back to getting the Lineage Boot animation.
Thanks for helping since I'm trying to get Lineage to boot.
cyrus104 said:
Ok, I fixed that and install OOS 3.6.1 and then was able to install TWRP 3.1.1-0.
I then wanted to install Lineage 14.1:
I then formatted Cache, System, Data, Dalvik... everything but internal. Should I wipe internal as well?
I copied over linage 14.1 and open_gapps for the same build micro.
I now am back to getting the Lineage Boot animation.
Thanks for helping since I'm trying to get Lineage to boot.
Click to expand...
Click to collapse
Internal doesn't really matter to be honest, did you check they data and system are formatted as ext4.
It is in twrp advanced wipe options.
Did it ever boot ?
I did doubt check the data and system are formatted as ext4.
I let it sit for 3-4 hours and didn't see any progress.
Try a different rom. There are a lot of lineage based roms around.
I tried that and am getting the same results. Even if I flash a full TWRP backup from a time when I had it known to be working it happens.
I've tested this with 3 different roms now. My latest attempt has been to update TWRP to 3.2.1 and then install lineage 14.1 20171208. I also tested with Paranoid and Carbon because they were near the top of my list not because I know anything about them.
The phone just never gets past the boot animation. If I reboot to recovery is there a log I can pull to see what the issue is?
Thanks
Would like to see if anyone has any thoughts. If I run OOS I can use the phone but as of right now I can't use any other rom.
Is there any advanced fastboot or wipes that can be done to get it to boot. Is there any type of debugging that will show me what's happening when it tries to boot.
Just trying to bump this, I really need a way to debug this problem. Besides running OOS, I have a feeling this device is bricked and the mega unbrick guide doesn't work.
Also looks like if I try to put Kali on top of the base 3.5.8, the phone goes into the animation loop. So any change after OOS on the device puts it into an animation loop.
Is there a way the system or boot locked? Even thought I can TWRP anything onto the phone without errors.
Hey!
I've got the same issue it seems, phone just sticks to boot animation when flashing any other ROM than OOS 3.6.1.
Any update?
EDIT :
problem was with the persist.img
Flashed a different firm file and it was resolved
cyrus104 said:
I have a US Oneplus2 that is stuck on the animation when it boots. I can get into TWRP and Fastboot, latest TWRP works and can also use an older version that I had.
I made a TWRP backup that I pulled off onto another computer. I then installed OOS 3.5.1 (I think) to do some testing. Once I was done testing, I decided I wanted the latest lineage as my backup was a 6 month old version of the latest at that time. I used TWRP to wipe the data, cache, and system to then install the latest Lineage 14.1 11/24/17 and gapps mini and micro (tested both). It gets to the lineage boot animation and the ball goes back and forth forever. I have left it over night and it's still going. I have rebooted the device, installed lineage several times, moved to 12/1/17 today with the same results.
After messing with it for hours and days, I decided to just put the TWRP backup back on the phone and then update from there. Well... my custom animation is load but the animation is also going forever.
Looking for some help on what might be wrong with the phone, thanks.
Click to expand...
Click to collapse
OOS does not refuse to boot if a mountable partition is corrupt. This is not the case with lineage. If a mountable partition is corrupt and the corresponding fstab entry does not allow lineage to format and somehow mount it then init never proceeds
Try flashing this file: https://glassrom.botstack.host/firmware/oos-3.6.1-firmware-signed.zip and try again
Note that this file reboots the device after the flash is done so don't use twrp queue to flash this file. Flash this file last
---------- Post added at 17:45 ---------- Previous post was at 17:34 ----------
Alternatively this is a method I don't recommend to beginners because they accidentally give twrp logs to devs without realising it
You can get logs by making the forcing the device to "crash" through the power button
Here's how it's done: you boot the non-booting ROM and wait for about a minute. Then press power + volume down while it's on the bootanimation. You have to hold it until you see the oneplus logo and boot to twrp
TWRP's kernel will recover the last booted kernel's log from ram and place it in /sys/fs/pstore
First you have to open the log yourself to check if it's valid. The file is console-ramoops-0. All other log files in that location are invalid for your specific issue
Now for an ordinary user this is hard. They can't tell if the log is a recovery log or a ROM log. Since we're dealing with official lineageos we assume selinux would be enforcing
You want to search for this string "permissive=1". On Linux just do cat console-ramoops-0 | grep "audit" (quotes are part of the command)
If you're on windows then you can download Linux and get the logs. Stop bothering me
If you see the string "permissive=1" in the log you have accidentally fetched a recovery log
Go back and boot again and wait for about a minute if selinux is permissive
The string should read
"permissive=0"
That means selinux is enforcing and this is indeed a ROM log
Send this log here
Hello,
Was this problem ever solved? I am experiencing the very same thing with every single ROM i have tried so far. TWRP is installed, I can install all ROMS but when I try to boot the phone, it just won't get passed the booting animation.
Thank you
Hi, I have owned my Xiaomi Mi A1 like 5 days ago, and after a day I had it in my hands I rooted the device with Magisk 14.1 in TWRP, well, after I day I rooted the phone the update of oreo just realesed and my cellphone was avalible to install it, so I decided to unroot my phone, and there is where the ALL the problem started... Seems like when I flashed Magisk it didin't make a backup of the original boot.img so when I flashed the magisk uninstaller it didn't boot into the phone, it sent me to recovery again, so I tried installing the Magisk installer again and it let me boot.
After watching that I tried to flash the latest ROM in MiFlash but it just didn't do nothing, it flashed in 1 second and nothing happened to the phone.
Yesterday after all of that happened I tried to update the phone manually while rooted with TWRP, I found a backup of oreo of TWRP, so I restored that backup in TWRP and it booted me to oreo finally, after booting it to oreo I decided to go back to TWRP to restore my data backup of Nougat to restore all my apps and that stuff but when I booted into recovery it asked for decrypt my storage (as always), so I tried to decrypt it with the pattern I always used before and it just didn't let me, it just failed I don't know why, I booted into the system again trying to remove that stuff but it just didn't let me, the button to remove it was unavalible, it just let me remove my pattern to unlock the phone, so I removed it to see if it would work and it just make the things worse, I booted into recovery again and it didn't let me again, so I tried to boot into system AGAIN and it just didn't let me, just infinite loop, and recovery just removed, so I booted into recovery with fastboot mode and it didn't ask me for any decryption, it just let me in, but without mounting my internal storage, it just didn't, I tried to wipe the data option and after that it worked again, internal storage appeared again, after it I flashed the recovery into both slots.
Well, the last thing I did is restore the backup of oreo again that I found in XDA, but it just give me infinite loop, it's been like half of hour or more "booting", I'm so frustated and worried about this, tell me that there is a solution for this, the phone is literaly new, just five days with it... That version of magisk literally ruined my phone, lol
Ok mate, I suggest you go back to the last factory fastboot Xiaomi source. You flash this with the MiFlash tool.
The first file you need is the latest fastboot rom. This is in the tgz/tar format.
tissot_images_7.12.19_20171219.0000.00_7.1_d39fa89aaf.tgz
Extract this tgz and the subsequent tar file so that you get a directory (containing .bat files and an image folder).
Download MiFlash2017-7-20-0.zip - it must be this version.
Get your phone into fastboot mode with at least 25% battery charge.
Follow the instructions to use MiFlash here https://forum.xda-developers.com/mi-a1/how-to/rom-factory-images-t3688548
Good luck!
I was running xXx 4.5, and decided to "upgrade" to 5.0.
I did the usual, wiped data/system, then flashed.
I got stuck in a bootloop, and found I had to double back and wipe /data.
I did that, got stuck at the boot animation.
If I go back to recovery, all the data is jumbled, I assume encrypted? I flashed a different twrp for 8.0 compatibility, no change.
I can't push/sideload anything (roms, recovery zips sideload fine), it fails.
So I flashed the stock recovery in fastboot, rebooted there, and tried to sideload via adb the stock 8.0 flash files.
Now it works at it for a few minutes and just comes back as "Installation Failed".
Where do I go next? All i can get to is recovery, fastboot, bootloader.
I've already factory reset/wiped everything, so don't care if I lose anything anymore.
Help?
Thanks.
It appears I found a solution, just a few posts below my own! I hate it when that happens.
Anyways ,
https://forum.xda-developers.com/showpost.php?p=75364805&postcount=7
seems to have got the ball rolling, I was able to copy files to my phone while in twrp, which I couldn't do before, and currently have xXx installing. The first time it installed it didn't ask about encrypted/decrypted and didn't give me any warnings, this time it did.
xXx still won't boot after flashing, trying stock full flash file..
edit 2: Was able to flash full oneplus update file and boot. had to do a factory reset after rebooting as it was crashing a ton and wouldn't get through setup. It's been running fine since though. Now I'm a little skittish to try again, there are some root features I'd really like to still have.
I have a OnePlus 5 phone stuck in the Fastboot mode, been contacting them for days now but I still keep hearing the same excuses that the matter has been escalated to their tier 2 tech support team Nd would be contacted. Please is there a way to copy files off the phone in this state before it's flashed?