Hi Guys,
I'm Kinda new about making a new thread, so if anything's wrong let me know.
Just last evening my nexus 6p (on Android 7.0 official) got into a boot loop from a normal state. It just boots & right after when the white google logo transforms into 4 round object, it just reboots (it takes about 3-5 secs). I can access the boot loader but was unable to access to recovery from there as that takes it to bootloop again. I've tried flashing it, but since i had already updated to Nougat official version & the official image for 6p is yet to come, i tried with some earlier version of Marshmallow. but that failed as well. can it be that i need to select the right version of factory image as i really do not remember my old marshmallow versions anymore.
It seems i'm out of options right now. :crying:
Any advice guys??
TIA
Found this on Nexus 6p help forum. Haven't tried it though so I'm unable to confirm if it works or not.
https://productforums.google.com/forum/#!topic/nexus/hdrNONCCoNE
@sirluigi, this EXACT thing just happened to me ..
stock nougat, only bootloader unlocked ((( and since I've got no access to recovery and no Nougat image, I don't know what to do next
minicoop7, unfortunately, for that guide I need to go into recovery mode
ciocu said:
@sirluigi, this EXACT thing just happened to me ..
stock nougat, only bootloader unlocked ((( and since I've got no access to recovery and no Nougat image, I don't know what to do next
minicoop7, unfortunately, for that guide I need to go into recovery mode
Click to expand...
Click to collapse
Have you tried using fastboot to temp boot to recovery?
fastboot boot twrp-3.0.2-1-angler.img
downloading 'boot.img'...
OKAY [ 0.409s]
booting...
OKAY [ 0.680s]
finished. total time: 1.097s
Click to expand...
Click to collapse
same behavior, nothing but a bootloop
I'm dowloading an official MM image, just to get the stock recovery and see if I can temp boot in it
edit: not possible, I even tried to flash twrp, I tried flashing stock recovery from MTC20F.. tried to temp boot in both, all with no luck and with phone constantly alternating between the "Your device cannot be checked for corruption" screen and the white Google screen with the open lock.
sirluigi said:
Hi Guys,
I'm Kinda new about making a new thread, so if anything's wrong let me know.
Just last evening my nexus 6p (on Android 7.0 official) got into a boot loop from a normal state. It just boots & right after when the white google logo transforms into 4 round object, it just reboots (it takes about 3-5 secs). I can access the boot loader but was unable to access to recovery from there as that takes it to bootloop again. I've tried flashing it, but since i had already updated to Nougat official version & the official image for 6p is yet to come, i tried with some earlier version of Marshmallow. but that failed as well. can it be that i need to select the right version of factory image as i really do not remember my old marshmallow versions anymore.
It seems i'm out of options right now. :crying:
Any advice guys??
TIA
Click to expand...
Click to collapse
Guys its very simple, flash the stock mtc20f image first. After that boot it, it wont work but don't worry. Onece it bootloops go into bootloader and fastboot flash twrp 3.0.2-0. once thats done boot into twrp recovery. Onece in twrp make a backup of the image you just flashed that don't work. Once thats done mount system in recovery. Once mounted plug phone into computer and open the twrp folder you will see on your internal wich will have the backup that you just made. Transfer an old working backup into that folder that way twrp will recognize that backup. Once the backup is in the folder you shoukd see 2 backups in there, your new one that doesn't boot and your old one that does work wich you just put into the twrp folder. Once done go to restore and restore the backup of the working rom you just put in there, make sure to check off all on restore. Once done reboot system and it should boot. This will only work if you have a backup of an old working rom.
---------- Post added at 01:13 AM ---------- Previous post was at 01:00 AM ----------
sirluigi said:
Hi Guys,
I'm Kinda new about making a new thread, so if anything's wrong let me know.
Just last evening my nexus 6p (on Android 7.0 official) got into a boot loop from a normal state. It just boots & right after when the white google logo transforms into 4 round object, it just reboots (it takes about 3-5 secs). I can access the boot loader but was unable to access to recovery from there as that takes it to bootloop again. I've tried flashing it, but since i had already updated to Nougat official version & the official image for 6p is yet to come, i tried with some earlier version of Marshmallow. but that failed as well. can it be that i need to select the right version of factory image as i really do not remember my old marshmallow versions anymore.
It seems i'm out of options right now. :crying:
Any advice guys??
TIA
Click to expand...
Click to collapse
OMG I finally got mine to work
I'll note down the exact steps , most of which may or may not be relevant
1) Flashed MTC20F using TWRP 3.0.2-1
2) Booted into recovery and wiped everything and the partitions
- Add - Booted back into twrp 3.0.2-1 and then swiped to allow modifications
3) Then fastboot flashed TWRP 3.0.2-0
4) Restored my backup ( except recovery)
5) Still got stuck in the google screen.
Now the next parts are a bit weird
6) Booted into TWRP, flashed vendor.img from pure nexus rom
7) wiped everything except internal storage
8) Flashed vendor.img, pure nexus rom and gapps and then flashed vendor.img again
9) Rebooted and it worked
Let me know if it worked for you guys or if you need any more help
disbeyad999989 said:
Guys its very simple, flash the stock mtc20f image first. After that boot it, it wont work but don't worry. Onece it bootloops go into bootloader and fastboot flash twrp 3.0.2-0. once thats done boot into twrp recovery. Onece in twrp make a backup of the image you just flashed that don't work. Once thats done mount system in recovery. Once mounted plug phone into computer and open the twrp folder you will see on your internal wich will have the backup that you just made. Transfer an old working backup into that folder that way twrp will recognize that backup. Once the backup is in the folder you shoukd see 2 backups in there, your new one that doesn't boot and your old one that does work wich you just put into the twrp folder. Once done go to restore and restore the backup of the working rom you just put in there, make sure to check off all on restore. Once done reboot system and it should boot. This will only work if you have a backup of an old working rom.
---------- Post added at 01:13 AM ---------- Previous post was at 01:00 AM ----------
OMG I finally got mine to work
I'll note down the exact steps , most of which may or may not be relevant
1) Flashed MTC20F using TWRP 3.0.2-1
2) Booted into recovery and wiped everything and the partitions
- Add - Booted back into twrp 3.0.2-1 and then swiped to allow modifications
3) Then fastboot flashed TWRP 3.0.2-0
4) Restored my backup ( except recovery)
5) Still got stuck in the google screen.
Now the next parts are a bit weird
6) Booted into TWRP, flashed vendor.img from pure nexus rom
7) wiped everything except internal storage
8) Flashed vendor.img, pure nexus rom and gapps and then flashed vendor.img again
9) Rebooted and it worked
Let me know if it worked for you guys or if you need any more help
Click to expand...
Click to collapse
Unfortunately, this didn't work for me.
I believe you should be fine with just trying to flash an earlier recovery version using fastboot... if you're trying to save your data and then factory flash MM and then restore your data to the phone, you should be able to use fastboot pull and then copy them back once you've got a working device by simple copy from windows.
disbeyad999989 said:
Guys its very simple, flash the stock mtc20f image first. After that boot it, it wont work but don't worry. Onece it bootloops go into bootloader and fastboot flash twrp 3.0.2-0. once thats done boot into twrp recovery. Onece in twrp make a backup of the image you just flashed that don't work. Once thats done mount system in recovery. Once mounted plug phone into computer and open the twrp folder you will see on your internal wich will have the backup that you just made. Transfer an old working backup into that folder that way twrp will recognize that backup. Once the backup is in the folder you shoukd see 2 backups in there, your new one that doesn't boot and your old one that does work wich you just put into the twrp folder. Once done go to restore and restore the backup of the working rom you just put in there, make sure to check off all on restore. Once done reboot system and it should boot. This will only work if you have a backup of an old working rom.
---------- Post added at 01:13 AM ---------- Previous post was at 01:00 AM ----------
OMG I finally got mine to work
I'll note down the exact steps , most of which may or may not be relevant
1) Flashed MTC20F using TWRP 3.0.2-1
2) Booted into recovery and wiped everything and the partitions
- Add - Booted back into twrp 3.0.2-1 and then swiped to allow modifications
3) Then fastboot flashed TWRP 3.0.2-0
4) Restored my backup ( except recovery)
5) Still got stuck in the google screen.
Now the next parts are a bit weird
6) Booted into TWRP, flashed vendor.img from pure nexus rom
7) wiped everything except internal storage
8) Flashed vendor.img, pure nexus rom and gapps and then flashed vendor.img again
9) Rebooted and it worked
Let me know if it worked for you guys or if you need any more help
Click to expand...
Click to collapse
Can you elaborate the steps pls? also have you had an earlier back up of your phone which i don't have?
Has anyone been able to get this to work without being able to get into TWRP? I can't get into recovery whether it is a temp boot to it, or fastboot flash either version..
I have compiled a list of the 20+ methods from various users in THIS thread. It's the second post.
Stuck in a bootloop still @tr4nqui1i7y but will try your methods as well... Fingers crossed..
So I do not if this may help anyone who as run into this issue but still may want to retrieve their data before formating their data or factory resetting. While running TWRP 3.0.3 and flashing the latest 7.1.1 files for angler. I would sometimes be able to boot into the recovery like 3/10 tries ( from the bootloader menu). My data was encrypted and it woul freeze constantly when trying to decrypt soo i decided once I finally got it to boot again in the recovery menu(TWRP after hours mind you) I let the phone stay idle for a few mins should the cpu would cool down that my battery percentage would drop around 41% and the tried to decrypt data which went tru successfully. I retrieve what I Could and it froze during a process of a nandroid backup and started bootlooping again. I believe the battery percentage may be linked to the early shutdown issues that many user were reported having and the bootloop of death we are experiencing. Hopefully this info may help someone else.
Related
Hey guys, I'm a longtime XDA browser but hardly ever post. I have the MXPE rooted with the newest TWRP build and has been running great since I got it. last night flashed the Deodexed 6.0 build from AICPs 5.1.1. I had some issues with the SD card being mounted as internal storage and erasing something so I tried to flash back to stock as my nandroids weren't seen as usable.
Long story short when I flashed back to stock, the recovery would never take. I've flashed the stock recovery and twrp to no avail. For some reason it wont actually stick. Everything else is back to stock but that. When I used the win toolkit and tried to flash twrp again it said something about the folder locations so I'm wondering if I messed something in the partitions.
Question is, have you guys ran into this issue or have any insight on where to go from here? I've looked around but I couldn't find a post that the same as this issue. As a side note, I can get into the bootloader just fine.
I appreciate any info that someone can provide.
Flash twrp. Reboot back to recovery from recovery. Reboot system.
Hopefully it's that easy. Stock os flashes stock recovery on boot. Rebooting recovery from recovery prevents that from happening.
From TWRP:
"Note many devices will replace your custom recovery automatically during first boot.... Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install."
mxpe 6.0
Thanks for the info ffejy462. What happens when I try to flash TWRP and it doesnt stick? I know for a fact that I can boot into it temporarily with fastboot boot and the recovery file. Should I just flash it from there?
THEFILLTER said:
Thanks for the info ffejy462. What happens when I try to flash TWRP and it doesnt stick? I know for a fact that I can boot into it temporarily with fastboot boot and the recovery file. Should I just flash it from there?
Click to expand...
Click to collapse
I'm sorry I didn't see this sooner. Flash recovery with fastboot. Boot into recovery. From reboot menu in recovery, select reboot recovery. Twrp will patch so recovery isn't lost again.
mxpe 6.0
That did it. thanks alot ffejy462!
I am trying to flash my N4 with cyanogenmod following the official wiki.
I'm at the point where I've installed TWRP into recovery, I've wiped everything (I've even formatted them since I couldn't wipe all of it initially), and the only error I see is "unable to mount /usb-otg".
Then, I've "installed" the CN zip files for the 13 and 12 versions, none of them works in the sense that when I reboot the system, I'm always coming back to TWRP.
What's wrong? Any suggestion?
Thanks
I've the same problems with my nexus 4
gerardgerard said:
I am trying to flash my N4 with cyanogenmod following the official wiki.
I'm at the point where I've installed TWRP into recovery, I've wiped everything (I've even formatted them since I couldn't wipe all of it initially), and the only error I see is "unable to mount /usb-otg".
Then, I've "installed" the CN zip files for the 13 and 12 versions, none of them works in the sense that when I reboot the system, I'm always coming back to TWRP.
What's wrong? Any suggestion?
Thanks
Click to expand...
Click to collapse
Hi gerardgerard,
I also wanted to flash my Nexus 4 with Cyanogenmod 12.1. So I installed TWRP into recovery and wiped everything, like it's explained in the wiki. I can also see the error "unable to mount /usb-otg". When I want to reboot the system I always get back to TWRP. Cyanogenmod doesn't boot correctly. Did you find a solution for the problem?
same problem
Hi
I'm having the same problem. As follows:
Cause (my mistake): I have been using Cyanogen-mod nightlies for a couple of months on my Nexus 4, and made the grave mistake of leaving the phone to upgrade one night but without it being plugged in properly - and it ran out of power part way through! (At least, that's what I think happened).
Fortunately, it would boot into bootloader and I could use adb/fastboot. I (re)installed TWRP 2.8.7.0 (from my Mac, using fastboot). And that works fine - I can boot into twrp ok.
Next I loaded the latest nightly from cm (using fastboot - is this what people call sideloading?) and used twrp to install it. It goes through the installation fine (the only error message is that it can't mount /usb-otg). But when I reboot it just goes back to twrp.
I then tried installing the earlier cm nightly that I know worked, but with the same result.
Finally, before I first installed cm I did a backup (using twrp), and I have tried recovering that. It seems to do all the right things, but again when I reboot it just goes back to twrp.
Any suggestions would be welcome.
Thanks
J
Flash back to a completely stock ROM and run through the set up to make sure everything works. Then copy CM to the phone, reboot to fastboot, flash twrp, immediately boot into recovery using the volume and power button without leaving fastboot, wipe data, cache, system, flash CM, reboot.
If the phone will not boot after flashing a stock ROM, boot to fastboot, flash the userdata.img file, and immediately go to stock recovery without leaving fastboot, wipe data/cache, reboot.
It works now!
I managed to fix the problem ... I found this guide for the Nexus 5:
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
and I applied those instructions. It didn't work first time, so I just repeated them and now it's working. I used the 5.1.1 stock downloaded from https://developers.google.com/android/nexus/images#occam.
I guess this is what audit13 means in their post - so thanks are due there.
I will next reinstall twrp and cm and I don't expect any problems with that (having done it successfully before).
Smaje
So i got my nexus 4 today. I booted it up into the latest google rom it supported (Which the previous owner had on it) to check if it worked. Booted into the home screen fine. I threw it into fastboot, unlocked the bootloader, flashed twrp 3.1.0.0. Thats when i had issues. At first, it bootlooped. I reflashed it back to complete stock (Using the google provided factory images, using the flash-all.bat and then , wouldnt boot. Was stuck on the 4 dots racing around the screen. Flashed it again to the same conclusion. Reflashed twrp, booted into it. It wont detect ANYTHING and when i go to terminal it shows this: (see attached)
Help please?
xBane_ said:
So i got my nexus 4 today. I booted it up into the latest google rom it supported (Which the previous owner had on it) to check if it worked. Booted into the home screen fine. I threw it into fastboot, unlocked the bootloader, flashed twrp 3.1.0.0. Thats when i had issues. At first, it bootlooped. I reflashed it back to complete stock (Using the google provided factory images, using the flash-all.bat and then , wouldnt boot. Was stuck on the 4 dots racing around the screen. Flashed it again to the same conclusion. Reflashed twrp, booted into it. It wont detect ANYTHING and when i go to terminal it shows this: (see attached)
Help please?!?
Click to expand...
Click to collapse
xBane_ said:
So i got my nexus 4 today. I booted it up into the latest google rom it supported (Which the previous owner had on it) to check if it worked. Booted into the home screen fine. I threw it into fastboot, unlocked the bootloader, flashed twrp 3.1.0.0. Thats when i had issues. At first, it bootlooped. I reflashed it back to complete stock (Using the google provided factory images, using the flash-all.bat and then , wouldnt boot. Was stuck on the 4 dots racing around the screen. Flashed it again to the same conclusion. Reflashed twrp, booted into it. It wont detect ANYTHING and when i go to terminal it shows this: (see attached)
Help please?!?
Click to expand...
Click to collapse
Just boot in to TWRP and connect it to PC, it will get detected as a storage on PC. Then you can copy any ROM and flash it and see if it boots.
(Or refer this to remove mount errors: http://itechify.com/2016/04/01/fix-failed-mount-cache-invalid-argument/)
Nitin
nitin.chobhe said:
Just boot in to TWRP and connect it to PC, it will get detected as a storage on PC. Then you can copy any ROM and flash it and see if it boots.
(Or refer this to remove mount errors: http://itechify.com/2016/04/01/fix-failed-mount-cache-invalid-argument/)
Nitin
Click to expand...
Click to collapse
Didn't work. Keep in mind I can't mount anything but system, and even then it spits out an error. I know this is fixable, but how?
My guess is it's a corrupted file system. Can I fix that by going into twrp and selecting repair/change filesystems on all partitions?
If that doesn't work, should I go over to ODIN and flash stock rom a couple times?
EDIT: I fixed it by going into twrp and formatting data. I must've corrupted the data partition when I flashed twrp.
That's odd, the factory image flash-all.bat should've wiped all the partitions, including DATA. Unless … you edited the script.
\\ Sent from an Android or iOS device //
Hi guys, been using my rooted but otherwise stock OOS rom with TWRP and Magisk for the past few weeks. Today I decided to take the plunge and try either the Lineage OS or Resurrection Remix roms.
I'm using the latest OFFICIAL TWRP.
So I decrypted following the instructions to flash "no-verity-opt-encrypt-5.1.zip", then format data. All went well, so I then sent over the ROMS I wanted to try out. I started with the official ResurrectionRemix. Bootloop. Then the unofficial LineageOS. Bootloop.
Ok, well I guess I'm not gonna get to use any of the cool new OS's for awhile. I'll install the full stock firmware zip so I can have a working phone again. Bootloop.
Now when I say bootloop, the phone is booting to the BootAnimation and just repeating it. It shows the proper boot animation for whatever zip I have installed (resurrection/LOS/OOS), but it stays on there for up to 20 minutes before I have to hard reboot to the recovery again.
I decided to install the stock recovery trying a few methods. I first tried the ALL-IN-ONE tool. It said it flashed the recovery fine, so I booted to the recovery and after staying on a black screen for too long, the language options came up and I sighed a breath of relief. But before I could select English with the volume buttons, it rebooted by itself. It did this again when I manually entered recovery. So I figured maybe the tool flashed the wrong version, so I googled stock recovery for OnePlus 5, I found a few random links for stock recoveries for the OP5 and flashed them, but they more or less do the same thing or not boot at all.
I've tried changing the filesystem for both Data and System using any combinations of EXT4 and F2FS. Everything results in boot animation bootloops.
I have been flashing Roms since the Samsung Galaxy S3 and every phone since and never had any problems.
Currently when trying to install the stock Full OOS official zip with TWRP, the phone won't even go to the boot animation, it only goes to a black screen with the top LED in a light blue color.
I have also tried every version of TWRP there is for the OnePlus 5. Unofficial, Official, 3.1.1-0 and 3.1.1-1.
So I guess my question is....What filesystem is each partition supposed to be on and for which OS?
Lineage based:
System: ?
Data: ?
OOS Based:
System: ?
Data: ?
And any ideas on getting my phone running again?
And anyone have an official confirmed working version of the stock recovery? The one from ALL-IN-ONE TOOL doesn't work for me. It loads the language selection, then the screen goes black with a light blue LED on the top of the phone.
Actually I'm getting that on some roms instead of the bootanimation, like FreedomOOS. What does it mean when you have a black screen and a white LED?
Man, I really thought I was getting somewhere. If I boot into TWRP, change the Data partition to "F2FS", then flash the stock recovery, the stock recovery will boot, however, when inside the stock recovery and I try to flash the stock zip, it says "Flashing, don't turn off your device" for about 5 seconds and then goes back to the list of roms on the SD card, not having flashed anything at all.
Ok, I have the official stock recovery from the OnePlus site, but still can't use it. Here is was happens depending on how I left it with TWRP:
System: F2FS
DATA: F2FS
- Stock recovery will load after some time, freeze, then the screen goes black with white LED on top.
System: EXT4
DATA: F2FS
- Stock recovery loads fine, I can go through the settings and install from SD card, but when I do it says "Flashing, don't turn off your device" for about 5 seconds and then goes back to the list of roms on the SD card, not having flashed anything at all.
System: EXT4
DATA: F2FS
- If I try to flash stock rom through TWRP, it just boot loops on the animation forever.
I have now also tried flashing the stock boot.img, but no difference.
I have 2 things you can try!
First, replace the bootloader with stock and do a factory reset:
1. flash the stock recovery over
2. then in fastboot mode enter, fastboot oem lock (This forces the phone to wipe cache and data, and also do a complete reset)
Did it work? if yes YAY if not go to Second!
Second if your system.img is ****ed up you have to replace it!
Download the newest version of the stock rom from oneplus link here
Unpack it
research how to use an extractor to convert the system.new.dat to system.img
once thats completed enter fastboot mode and flash the new system.img over with Fastboot flash system system.img
now go into recovery and do a factory reset and wipe cache, and dalvik
Please reply back wether or not this work
"Ihave 2 things you can try! First, replace the bootloader with stock and do a factory reset..."
Is the bootloader simply the boot.img?
After doing the first thing, it simply says that the device is corrupt and will not boot. But it is locked again.
But I will have to unlock it again to do any further flashing.
Hmm, I think I may have gotten it. After unlocking again, flashing the stock recovery and boot.img, then locking again and wiping in the stock recovery, I have finally booted into the stock rom.
I still have no idea what went wrong, and I really want to know, so that in the future I can flash other Roms, like LineageOS.
I mean, I followed the steps exactly.
If it says the device is corrupt it simply means you got something else besides stock rom.
So now unlock it and try the system.img instead
It was because I still had TWRP with the stock rom.
I got it working though, thanks for your help.
Do you have any idea on what might have went wrong when trying to flash the lineageOS based roms and why it got messed up so royally?
Great to hear you fixed it ^_^
Probably some minor bug, if you wanna try installing lineageos again use the 3.1.1 TWRP build that supports backups and do a full backup so you don't have to go thru all this again
---------- Post added at 12:17 AM ---------- Previous post was at 12:13 AM ----------
Not really just try again but remember to use TWRP 3.1.1, as 3.1.0 don't support backup and probably have been part of your problem
If your trying again and gets it successfully installed could you do me a favor and test if Drivedroid works on it? And pm me the result, I'm looking for a rom where Drivedroid will work... Haven't found one so far
You know, I did do a backup with the OFFICIAL TWRP, but it also resulted in a bootloop. I made the backup after decrypting, so I don't know why it bootlopped.
https://forum.xda-developers.com/oneplus-5/development/rom-unified-lineageos-7-1-2-t3635483
Is this the one you tried installing?
I tried like every ROM at one point yesterday, but I think I started with
https://forum.xda-developers.com/oneplus-5/development/rom-resurrection-remix-n-7-1-2-t3636578
Did you remember Gapps?
Also in some cases its better not to root before you have the custom rom running, you usually only need a custom bootloader like TWRP
Yeah, I tried with Gapps, and I never rooted before first trying to boot.
As of yesterday Ressurrection remix, released the first official stable build so try again your should'nt have any problems if you follow the guide 100%
Ever find a solution? I'm stuck here now. Can't get any ROM to boot up, they all get stuck on the boot animation
Bump. I am also stuck in this state
Hey!
I installed LineageOs on my Xiaomi Mi A1, everything went okay but when I installed the Gapps, it got stuck on the LineageOs logo. The volume button wasn't working right, yet somehow, I manage to enter TWRP and wipe that OS and restore the backup with the original Android One. But when I boot it, it got stuck on Android logo, unable to enter fastboot, TWRP or hard reset because of the volume button not working.
I don't know what else to do, to be honest...
p.d.: I'm new here, sorry if this is not the right section to ask.
Are you 100% sure that you have chosen right version of GApps? because i never had any issues with GApps causing boot loop. BTW what lineage os version 16 or 17 ?
I never had any luck restoring stock rom backup via TWRP either i have no idea why whenever i restore it will stuck on androidone logo.
royalasif said:
Are you 100% sure that you have chosen right version of GApps? because i never had any issues with GApps causing boot loop. BTW what lineage os version 16 or 17 ?
I never had any luck restoring stock rom backup via TWRP either i have no idea why whenever i restore it will stuck on androidone logo.
Click to expand...
Click to collapse
I chose Android 10 GApps since I installed LineageOS 17. I thought it was the right version.
So TWRP can't be used for stock rom? I didn't know, maybe that's what got me stuck on Android One logo.
Any idea on how to get out from that loop? ?
Dont worry bootloop is not a problem download pixel experience it include gapps boot ur phone to twrp copy rom into internal or sd card Wipe system , data , cache and install the rom ..
TWRP should backup and restore stock image but i think there is something with this phone which wont let twrp to apply system restore i have done it 10 times and i failed everytime.
Edit: do let me know how it goes:good:
royalasif said:
Dont worry bootloop is not a problem download pixel experience it include gapps boot ur phone to twrp copy rom into internal or sd card Wipe system , data , cache and install the rom ..
TWRP should backup and restore stock image but i think there is something with this phone which wont let twrp to apply system restore i have done it 10 times and i failed everytime.
Edit: do let me know how it goes:good:
Click to expand...
Click to collapse
Definitely I'll try Pixel Experience! Seems like a good choice. I still need to figure out how to enter Fastboot or TWRP without the volume button.
try adb cmd if it works if not then u have to boot your device to EDL mode by test point method and then flash stock rom
ranjodhricky said:
try adb cmd if it works if not then u have to boot your device to EDL mode by test point method and then flash stock rom
Click to expand...
Click to collapse
Adb cmd won't recognize the device, so I'll have to boot it to EDL mode. Is there any guide here? I don't know how to do it.