Odin fails to flash Stock ROM to my i9515, why? - Galaxy S 4 Q&A, Help & Troubleshooting

Hi,
I downloaded the latest Stock ROM for my i9515, because I am not satisfied with CM13.0 and 12.1, so I bootet to Odin mode, and try to flash the Tar.md5 file, but Odin keeps getting me this error, why? How can I sucessfully flash stock?
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1101)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1101)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/008> Added!!

You should try another USB cable and USB port.

I always recommend using the original Samsung USB cable, Win7, and Odin 3.10 to flash a stock ROM if possible.

Related

GT-i9506: Installing 4.4 on i9506

Hi, im trying to install the 4.4 korean update onto my australian phone, i downloaded an stock image for the E330s hoping it would work, but upon flashing i get the error in odin 1.85 & 3.07
Code:
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
QUALCOMM SECUREBOOT: 0x1b
WRITE PROTECTION: ENABLE
SECURE CHECK FAIL : sbl1
Auto-reboot & F. reset time
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> E330SKSUCNA7_E330SSKTCNA7_E330SKSUCNA5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sbl1.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
then i did with repartition checked:
Code:
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> E330SKSUCNA7_E330SSKTCNA7_E330SKSUCNA5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:1/008> Added!!
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:1/008> Odin v.3 engine (ID:8)..
<ID:0/013> File analysis..
<ID:1/008> File analysis..
<ID:0/013> SetupConnection..
<ID:1/008> SetupConnection..
<ID:1/008> Initialzation..
<ID:1/008> Get PIT for mapping..
<ID:1/008> Firmware update start..
<ID:1/008> sbl1.mbn
<ID:1/008> NAND Write Start!!
<ID:1/008> FAIL! (Auth)
<ID:0/013> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 2)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:1/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Can't open the specified file. (Line: 1949)
<OSM> All threads completed. (succeed 0 / failed 1)
my model number is:
I9506XXUAMHD
any help would be nice
GT- i9506 still without have android 4.4.2 ready. E330s isn't the same device and don't use same firmware. Each model have own firmware. The unique you gonna have is a paperweight trying this experiments :silly:
well im just waiting for the download link to cm11
http://forum.xda-developers.com/showthread.php?t=2662462
phone is still working and if not i have 4.3 to rely on.
also is qualcomm secureboot = knox?

[Q]There is no PIT partition when rooting?

Sooooo I recently upgraded to KitKat 4.4.2. My device is Samsung Galaxy S4 I9505. This is the logs/message on Odin.
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Removed!!
<ID:0/008> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone knows how to do this? I'm really noob at it so I still don't know how to fix it. Hoping for someone to reply
Have a look on the internet..
http://forum.xda-developers.com/showthread.php?t=2283919

[Q] Please help me my note3 n900 not accepted any rom!!

Hello everyone , i have note3 n900 i trying upgrade it with rom (N900XXUENH1_N900OJVENG2_N900XXUENG1_HOME.tar.md5) and not Successful and i try downloading other roms and i get the same problem
odin log :
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUENH1_N900OJVENG2_N900XXUENG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/023> Added!!

Tab 4 won't boot

I have a tab 4 that will not boot. When I hold down the power+home+volume down buttons, it shows a horizontal white line in the center of the screen. Pushing the volume up button takes me to a black screen with the Odin mode text in the upper left. I've tried both Kies and Odin PC to load the stock firmware on it but Kies just tells me it's not compatible, which it should be, and Odin gives me this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> loke_1st.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
As far as I know, this tab has not been flashed with a custom rom. I had to use a Pit file with Odin because I was given an error saying Pit not found.

Help

I was trying to flash custom rom using odin to my galaxy trend lite
/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7392DDUAND1_S7392ODDAND1__S7392DDUAND1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
Pls tell me whats the problem!!
You created thread in wrong section. Can't you see it this is rom kernel development section. Plz moderator delete this thread...

Categories

Resources