Help - Samsung Galaxy Fresh/Trend Questions & Answers

I was trying to flash custom rom using odin to my galaxy trend lite
/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7392DDUAND1_S7392ODDAND1__S7392DDUAND1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
Pls tell me whats the problem!!

You created thread in wrong section. Can't you see it this is rom kernel development section. Plz moderator delete this thread...

Related

GT-i9506: Installing 4.4 on i9506

Hi, im trying to install the 4.4 korean update onto my australian phone, i downloaded an stock image for the E330s hoping it would work, but upon flashing i get the error in odin 1.85 & 3.07
Code:
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
QUALCOMM SECUREBOOT: 0x1b
WRITE PROTECTION: ENABLE
SECURE CHECK FAIL : sbl1
Auto-reboot & F. reset time
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> E330SKSUCNA7_E330SSKTCNA7_E330SKSUCNA5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sbl1.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
then i did with repartition checked:
Code:
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> E330SKSUCNA7_E330SSKTCNA7_E330SKSUCNA5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:1/008> Added!!
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:1/008> Odin v.3 engine (ID:8)..
<ID:0/013> File analysis..
<ID:1/008> File analysis..
<ID:0/013> SetupConnection..
<ID:1/008> SetupConnection..
<ID:1/008> Initialzation..
<ID:1/008> Get PIT for mapping..
<ID:1/008> Firmware update start..
<ID:1/008> sbl1.mbn
<ID:1/008> NAND Write Start!!
<ID:1/008> FAIL! (Auth)
<ID:0/013> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 2)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:1/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Can't open the specified file. (Line: 1949)
<OSM> All threads completed. (succeed 0 / failed 1)
my model number is:
I9506XXUAMHD
any help would be nice
GT- i9506 still without have android 4.4.2 ready. E330s isn't the same device and don't use same firmware. Each model have own firmware. The unique you gonna have is a paperweight trying this experiments :silly:
well im just waiting for the download link to cm11
http://forum.xda-developers.com/showthread.php?t=2662462
phone is still working and if not i have 4.3 to rely on.
also is qualcomm secureboot = knox?

[Q]There is no PIT partition when rooting?

Sooooo I recently upgraded to KitKat 4.4.2. My device is Samsung Galaxy S4 I9505. This is the logs/message on Odin.
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Removed!!
<ID:0/008> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone knows how to do this? I'm really noob at it so I still don't know how to fix it. Hoping for someone to reply
Have a look on the internet..
http://forum.xda-developers.com/showthread.php?t=2283919

[Q] Please help me my note3 n900 not accepted any rom!!

Hello everyone , i have note3 n900 i trying upgrade it with rom (N900XXUENH1_N900OJVENG2_N900XXUENG1_HOME.tar.md5) and not Successful and i try downloading other roms and i get the same problem
odin log :
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUENH1_N900OJVENG2_N900XXUENG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/023> Added!!

Problem returning from 5.1.1 to 4.4.4 N910c

good morning I have a problem when you want to return install the Android 5.1.1 rom N910CXXU2COJ5_N910CUUB2COJ2_N910CXXU1COJ5_HOME.tar and now I can not go back to 4.4.4 .
Odin says:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910CXXU1ANK5_N910CUUB1ANL1_N910CXXU1ANL4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
and the cell appears a legend
SW REV. CHECK FAIL DEVICE:2, BINARY:1
I have the version COJ5
Thank you
After you install COJ5, you are stuck to it. There is no easy way to downgrade it as now.

galaxy s5 g900f root failure.

sup people, so i've been trying to root my s5 using this file "CF-Auto-Root-klte-kltexx-smg900f.tar" and whenever i try i get the same message which is:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-klte-kltexx-smg900f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any idea how to fix this?
Follow these instructions
http://forum.xda-developers.com/gal...ow-to-root-t3300316/post64961009#post64961009

Categories

Resources