Database Users

Bricked my VNS-L31, any advice?

Hi all,
I messed up pretty bad trying to update to nougat. Current situation is that my bootloader is unlocked, I can access fastboot and stock recovery. Nothing else.
I've tried to change the recovery to twrp via fastboot but I get command not allowed. Attempting to flash a stock marshmallow rom via fastboot returns failed to load: not enough space or failed to load: no error depending on whether I'm trying to flash the update.zip or the extracted system.img.
I've also tried putting the stock rom in a folder called dload on my external sd card and rebooting while holding vol+ and vol-, it starts on 5% completion then fails. It does this even without the stock rom on the sd card.
I've been trying to fix it for hours now with no luck. Am I screwed?
Thanks in advance,
Laura

Lora2 said:
Hi all,
I messed up pretty bad trying to update to nougat. Current situation is that my bootloader is unlocked, I can access fastboot and stock recovery. Nothing else.
I've tried to change the recovery to twrp via fastboot but I get command not allowed. Attempting to flash a stock marshmallow rom via fastboot returns failed to load: not enough space or failed to load: no error depending on whether I'm trying to flash the update.zip or the extracted system.img.
I've also tried putting the stock rom in a folder called dload on my external sd card and rebooting while holding vol+ and vol-, it starts on 5% completion then fails. It does this even without the stock rom on the sd card.
I've been trying to fix it for hours now with no luck. Am I screwed?
Thanks in advance,
Laura
Click to expand...
Click to collapse
Use huawei firmware extractor
Use your rom you want to flash
It gives you boot.img cust.img recovery.img and system.img
Flash all the 4 imgs and your phone will reboot normally
But you will lose all your data

diorenzo said:
Use huawei firmware extractor
Use your rom you want to flash
It gives you boot.img cust.img recovery.img and system.img
Flash all the 4 imgs and your phone will reboot normally
But you will lose all your data
Click to expand...
Click to collapse
Hi,
I tried this and it did not work, I tried specifying the path and moving the imgs around but it wasn't having it. However I managed to get the three buttons method to work!
I'm back to square one but at least my phone isn't broken.
Thanks for your help

Oh, great
Btw you had to install via fastboot all those 4 files
I had your same problem and i managed to restore my phone (losing all my files)

Check bootloader, if still unlocked?? Try lock/unlock and flash with extractor...
Odoslané z VNS-L21 pomocou Tapatalku

Got the same problem.
Fastboot method wont work, and even flash UPDATE:APP with stock recovery wont work. :-/
Any Ideas?
My Bootloader is unlocked!

Lora2 said:
Hi all,
I messed up pretty bad trying to update to nougat. Current situation is that my bootloader is unlocked, I can access fastboot and stock recovery. Nothing else.
I've tried to change the recovery to twrp via fastboot but I get command not allowed. Attempting to flash a stock marshmallow rom via fastboot returns failed to load: not enough space or failed to load: no error depending on whether I'm trying to flash the update.zip or the extracted system.img.
I've also tried putting the stock rom in a folder called dload on my external sd card and rebooting while holding vol+ and vol-, it starts on 5% completion then fails. It does this even without the stock rom on the sd card.
I've been trying to fix it for hours now with no luck. Am I screwed?
Thanks in advance,
Laura
Click to expand...
Click to collapse
try unlocking bootloader again, not allowed means it's locked, eventhough it says unlocked. then you should be able to flash twrp. and then you can flash oeminfo for stock mm rom, and put the update.app in dload, and then use the 3 button combo

Problem with rollback n to mm

I got a problem with mij P9 i mest up my system
i installed Nougat but wasnt happy without working bleutooth. I treid to do rollback but mest up my system
What happend; i took the howto rollback and downloaded the files i needed i took the oeminfo and flashed it, from that point on i tried to install recovery but nothing worked, i think i flashed the wrong oeminfo "L21" but my phone is a L31..
I can boot the phone, but i gives me a red warning message "Your device has failed verification and may not work properly"
I lost a lot off apps
I can boot Fastboot and bootloader is unlocked
i tried the folllowing to fix it
Flashed (all) recovery trough fastboot gives a "Failed" message (fastboot gives a lot of failes) but trough fastboot it says bootloader unlocked
I tried with 3 buttons an dload tot flash oeminfo but i get erecovery with message data damaged and i can choose to wipe all and install trough wifi but that dosnt work.
Ad this time im confused and i woud really like to get my system up and runnng like it supose to
So if someone could help me out i would be veryy thanfull
grtz
Maarten

maartenhordijk1978 said:
I got a problem with mij P9 i mest up my system
i installed Nougat but wasnt happy without working bleutooth. I treid to do rollback but mest up my system
What happend; i took the howto rollback and downloaded the files i needed i took the oeminfo and flashed it, from that point on i tried to install recovery but nothing worked, i think i flashed the wrong oeminfo "L21" but my phone is a L31..
I can boot the phone, but i gives me a red warning message "Your device has failed verification and may not work properly"
I lost a lot off apps
I can boot Fastboot and bootloader is unlocked
i tried the folllowing to fix it
Flashed (all) recovery trough fastboot gives a "Failed" message (fastboot gives a lot of failes) but trough fastboot it says bootloader unlocked
I tried with 3 buttons an dload tot flash oeminfo but i get erecovery with message data damaged and i can choose to wipe all and install trough wifi but that dosnt work.
Ad this time im confused and i woud really like to get my system up and runnng like it supose to
So if someone could help me out i would be veryy thanfull
grtz
Maarten
Click to expand...
Click to collapse
If your phone is VNS-L31C432, then try these methods:
1. In bootloader "fastboot boot TWRP_Recovery.img"
this should boot you into twrp without flashing it, from there flash B161_update.zip (which should be in your SD card).
(If that doesn't work, try "fastboot -c "lge.kcal=0|0|0|x" boot TWRP_Recovery.img"
haven't tried this on P9 Lite, but used to work on other phones).
2. If "fastboot flash recovery TWRP_Recovery.img" returns errors, but says bootloader unlocked, try to relock the bootloader and unlock it again.
"fastboot oem lock"
"fastboot oem unlock YOUR_CODE"
then try flashing recovery again.
Maybe also try flashing other recoveries, e.g. TWRP (which is for MM ROMs) or Revolution (which is for N ROMs) or even the stock boot.img.
3. Try the dload method wth B161 and maybe B160 - I know my P9 Lite would only accept B161 via dload, even though B370 and B360 and B130 are for the same model, those builds just wouldn't install this way.
4. Unpack B161 zip so you have update.app, extract from that boot.img, recovery.img and system.img.
Then do:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
Some of these methods might work, some won't but from my two experiences of bricking the P9 Lite, one of the four fixed the issue.
If you don't know where to get the B161 zips, I can post them later.
Also, this is just to get your system to a working and bootable condition. If you want to get back to full-fledged MM, you will also need to install the hw_eu zip after the B161 zip (and maybe do a factory reset after that for the sake of it).
Your apps and files are already gone, so no way to save that. Hope your phone gets back to working order soon enough.

JHD94 said:
If your phone is VNS-L31C432, then try these methods:
1. In bootloader "fastboot boot TWRP_Recovery.img"
this should boot you into twrp without flashing it, from there flash B161_update.zip (which should be in your SD card).
(If that doesn't work, try "fastboot -c "lge.kcal=0|0|0|x" boot TWRP_Recovery.img"
haven't tried this on P9 Lite, but used to work on other phones).
2. If "fastboot flash recovery TWRP_Recovery.img" returns errors, but says bootloader unlocked, try to relock the bootloader and unlock it again.
"fastboot oem lock"
"fastboot oem unlock YOUR_CODE"
then try flashing recovery again.
Maybe also try flashing other recoveries, e.g. TWRP (which is for MM ROMs) or Revolution (which is for N ROMs) or even the stock boot.img.
3. Try the dload method wth B161 and maybe B160 - I know my P9 Lite would only accept B161 via dload, even though B370 and B360 and B130 are for the same model, those builds just wouldn't install this way.
4. Unpack B161 zip so you have update.app, extract from that boot.img, recovery.img and system.img.
Then do:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
Some of these methods might work, some won't but from my two experiences of bricking the P9 Lite, one of the four fixed the issue.
If you don't know where to get the B161 zips, I can post them later.
Also, this is just to get your system to a working and bootable condition. If you want to get back to full-fledged MM, you will also need to install the hw_eu zip after the B161 zip (and maybe do a factory reset after that for the sake of it).
Your apps and files are already gone, so no way to save that. Hope your phone gets back to working order soon enough.
Click to expand...
Click to collapse
Thnx mate ill try tommorow and let you know how it went. For now its sleepy time

JHD94 said:
If your phone is VNS-L31C432, then try these methods:
1. In bootloader "fastboot boot TWRP_Recovery.img"
this should boot you into twrp without flashing it, from there flash B161_update.zip (which should be in your SD card).
(If that doesn't work, try "fastboot -c "lge.kcal=0|0|0|x" boot TWRP_Recovery.img"
haven't tried this on P9 Lite, but used to work on other phones).
2. If "fastboot flash recovery TWRP_Recovery.img" returns errors, but says bootloader unlocked, try to relock the bootloader and unlock it again.
"fastboot oem lock"
"fastboot oem unlock YOUR_CODE"
then try flashing recovery again.
Maybe also try flashing other recoveries, e.g. TWRP (which is for MM ROMs) or Revolution (which is for N ROMs) or even the stock boot.img.
3. Try the dload method wth B161 and maybe B160 - I know my P9 Lite would only accept B161 via dload, even though B370 and B360 and B130 are for the same model, those builds just wouldn't install this way.
4. Unpack B161 zip so you have update.app, extract from that boot.img, recovery.img and system.img.
Then do:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
Some of these methods might work, some won't but from my two experiences of bricking the P9 Lite, one of the four fixed the issue.
If you don't know where to get the B161 zips, I can post them later.
Also, this is just to get your system to a working and bootable condition. If you want to get back to full-fledged MM, you will also need to install the hw_eu zip after the B161 zip (and maybe do a factory reset after that for the sake of it).
Your apps and files are already gone, so no way to save that. Hope your phone gets back to working order soon enough.
Click to expand...
Click to collapse
thnx mate unlcoked the phone again and got into twrp happy me!!!

Follow Guide 1 from this link - https://forum.xda-developers.com/huawei-p9lite/help/unbricking-vns-l21-vns-l31-tutorial-t3583400
B130 is the perfect stock MM ROM

Hi I have a similar problem
JHD94 said:
If your phone is VNS-L31C432, then try these methods:
1. In bootloader "fastboot boot TWRP_Recovery.img"
this should boot you into twrp without flashing it, from there flash B161_update.zip (which should be in your SD card).
(If that doesn't work, try "fastboot -c "lge.kcal=0|0|0|x" boot TWRP_Recovery.img"
haven't tried this on P9 Lite, but used to work on other phones).
2. If "fastboot flash recovery TWRP_Recovery.img" returns errors, but says bootloader unlocked, try to relock the bootloader and unlock it again.
"fastboot oem lock"
"fastboot oem unlock YOUR_CODE"
then try flashing recovery again.
Maybe also try flashing other recoveries, e.g. TWRP (which is for MM ROMs) or Revolution (which is for N ROMs) or even the stock boot.img.
3. Try the dload method wth B161 and maybe B160 - I know my P9 Lite would only accept B161 via dload, even though B370 and B360 and B130 are for the same model, those builds just wouldn't install this way.
4. Unpack B161 zip so you have update.app, extract from that boot.img, recovery.img and system.img.
Then do:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
Some of these methods might work, some won't but from my two experiences of bricking the P9 Lite, one of the four fixed the issue.
If you don't know where to get the B161 zips, I can post them later.
Also, this is just to get your system to a working and bootable condition. If you want to get back to full-fledged MM, you will also need to install the hw_eu zip after the B161 zip (and maybe do a factory reset after that for the sake of it).
Your apps and files are already gone, so no way to save that. Hope your phone gets back to working order soon enough.
Click to expand...
Click to collapse
Hi I have a similar problem, I know you are all busy, but please help me out. My phone(P9 Lite) L31C16 emui4.1 but I installed a firmware of L31C169 emui5.0, now I'm stuck with andriod 7 which doesn't function perfectly and I'm stuck with a boot error of "Your device has failed verification and may not work properly". Please help me out.

Error Status 7

Good evening guys someone has a stock firmware for Huawei nova l01?
Let me explain I tried to flash the firmware from c55 to C432 nougat with TWRP but after that gave error-status 7 I could not get me to get it started and now I find myself with a phone in constant recovery.
Does anyone know how to help me?

Falcon_net said:
Good evening guys someone has a stock firmware for Huawei nova l01?
Let me explain I tried to flash the firmware from c55 to C432 nougat with TWRP but after that gave error-status 7 I could not get me to get it started and now I find myself with a phone in constant recovery.
Does anyone know how to help me?
Click to expand...
Click to collapse
Flash firmweare with fastboot, download ota with firmweare finder, copy update.app on your pc, extract with huawei extract tool boot.img, recovery.img and system.img(put the extracted images in the same folder where is located your fastboot) and flash them with fastboot.
With the phone turned off press vokume - while pluging the usb cable till will start in fastboot mode.
Run fastboot and enter this commands:
- fastboot flash boot boot.img
- fastboot flash recovery recovery.img
- fastboot flash system system.img
- fastboot reboot
and then wait the phone to reboot.

mArIuS% said:
Flash firmweare with fastboot, download ota with firmweare finder, copy update.app on your pc, extract with huawei extract tool boot.img, recovery.img and system.img(put the extracted images in the same folder where is located your fastboot) and flash them with fastboot.
With the phone turned off press vokume - while pluging the usb cable till will start in fastboot mode.
Run fastboot and enter this commands:
- fastboot flash boot boot.img
- fastboot flash recovery recovery.img
- fastboot flash system system.img
- fastboot reboot
and then wait the phone to reboot.
Click to expand...
Click to collapse
Thanks m ArluS but it does not work, the flash way around the terminal but upon reboot goes into eRecovery screen and not in, looking obviously some package for download via wifi but hangs failed ... giving me ideas?

I will share a way I got erecovery to work. I was brave and do not recommend this. If bricked do not blame me. I formatted system. Once system was gone it worked.

wangdaning said:
I will share a way I got erecovery to work. I was brave and do not recommend this. If bricked do not blame me. I formatted system. Once system was gone it worked.
Click to expand...
Click to collapse
How do you format the system and restore with a different firmware?

Formatted in fastboot then went erecovery.

Huawei p8 lite Bootloop Fix

so i had a p8 lite wich i tried rooting and it got stuck in a bootloop.
this worked for me
WARNING: this does delete everything you have (actually that is already gone)
(read all the way before doing anything)
first i set up adb & fastboot on my pc
https://youtu.be/UN7XW4HnFT8
2nd i downloaded stock firmware from huawei site ( you can also get this from rootjunky)
3rd i used HuaweiUpdateExtractor to get the recovery boot system and cust out (out of UPDATE.APP the one from the firmware)
4th i booted my phone into fastboot (i connected my phone to my pc first because otherwise i couldnt get into fastboot mode)
5th u start the command prompt in the adb&fastboot folder and type these commands (if you dont have custom recovery or custom roms you can skip to 5(i think i didnt do those)) :
1 adb devices (if it doesnt find it wait some time or reconnect it it will pop up sometime)
2 fastboot erase cache
3 fastboot flash boot BOOT.img
4 fastboot flash recovery RECOVERY.img
5 fastboot flash system SYSTEM.img
the system .img is too big so it will go in 6 parts and will often fail but just keep trying make sure to wait long enough because maybe it is still busy
6adb reboot
it should start up now.
these steps worked for me also when i did step 2 i could get into Erecovery wich i could before but now i could erase cache and something else and do a factory reset just press erase on everything then continu

https://forum.xda-developers.com/showpost.php?p=72567024&postcount=5

Mine is stucked too on "device is booting" is it really working ?
I was going to hang myself ...
---------- Post added at 10:21 PM ---------- Previous post was at 10:04 PM ----------
fastboot flash cust cust.img
returned me FAILED (remote: partition error)
Any idea ?

boot.recovery and system images all give me error Failed (remote:command not allowed ) Any advice ? Thanx

Wezdroid51 said:
boot.recovery and system images all give me error Failed (remote:command not allowed ) Any advice ? Thanx
Click to expand...
Click to collapse
yes i had that too in the beginning.
but i dont remember what i did.
i thing i just cleared chache and stuff using adb .
but anyway just keep trying the first few times i loaded them didnt work either

will try it
Hi Jan thanx will try it and let you know . Coz currently my device can only go into fastboot and rescue mode nothing else and with commands I can only use fastboot commands ofcoz and not adb commands coz my device is not in debug mode .

Same problem here
i get remote:command not allowed every time i want to use "fastboot flash boot boot.img"
Anyway to fix it ?

Unlock the bootloader again guys

please help me i hase emui 4..1
and i install twrp 4.1 and when i install nougat i install
supersu_v2.79_sr2 then
update_2 but when istall update it stop on writinh ratio i shut dun the phone but no login to twrp or to stock recovery
help me plaese
i flashed twrp from SRKTool the phone bootloop and i canot poweroff please help me
i was on 4.1 and i was unlock bootloader and twrp and i was insall nougat l29c185b560 wich have 3 files
supersu_v2.79_sr2 ----update_2------update_data_full_hw_meafnaf
when i flash update.zip in twrp it stop install on ratio i sutdown the phone and now the phone
is bootloop and not shutdown i try flash many recovery same problem my phone
is l29c185b--
https://forum.xda-developers.com/mat...icial-t3556789
I canot power off my phone but when I waited until the battery was discharged but the phone restart alone
I use method two by flash .img cust complet recovery complet boot complet but when flash system.img faild the rom exracted is l29c185b320
I try flash boot cust boot and system from nougat it complet but the problem same I canot dload I canot boot to recovery for wipe and the phone stay restart
please any help when I was flash nought it not complet it stop on writing ratio so I power off phone then the problem haben
boot loop any help my phone !!!!

XD
Omg thank you so much id give you money if i had any!

Bootloop
My phone is not unlocked but i have managed to bootloop it when I tried to downgrade it using update.app but now when i try to use the update.app method it gets to 5% and then displays update failed.
When trying to run any of the fastboot methods you mentioned I cannot run it cause it displays "failed (remote: command not allowed)"
I do not have the bootloader unlock code as huawei is being retarded and do not provide that sevice no more can anyone help??
its a Huawei P8 Lite(the old one) ALE-L21 and came with C02 firmware.
My Imei:863323035412487 S/N QLF7N16B17004301
Any help would be appreciated

Flash this If you stuck on fastboot or soft brick

Hi so I been seeing many people getting stuck on fastboot after flashing ROM so here is the method u can use if u can't boot to TWRP also.
I have tired on PA ROM and it works so idk about others ROMs ..
fastboot flash dtbo dtbo.img
fastboot flash logo logo.img
fastboot flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot flash misc misc.img (u can get on fastboot rom not .zip)
fastboot flash recovery recovery.img (recommend used twrp-3.3.1-2-davinci-fix).. Russian one
And after those comands do run TWRP auto installer.
U can find those files from fastboot stock ROM. This will save ur data and u won't needed to flash Stock ROM ..
Hope I explained everything if anything else needed comment down below.

Hi, i'm stuck in this fastboot limbo but can't find some of these files you mentioned: logo.img and misc.img
Where do i get them?
edit: nevermind, solved flashing fastboot miui with miflash pro.
EDIT 2: after flashing a rom i get stuck in fastboot everytime. How to avoid this?
Also tried flashing those files in that exact sequence but still stuck in fastboot.

My persist.img is shown not writable in cmd if I try to flash it. If I flash a rom using TWRP an error pops up saying "failed to mount /persist' (Invalid Argument).
SOLVED- Flashing persist.img from twrp "Install Image" works.

farhan20 said:
Hi so I been seeing many people getting stuck on fastboot after flashing ROM so here is the method u can use if u can't boot to TWRP also.
I have tired on PA ROM and it works so idk about others ROMs ..
fastboot flash dtbo dtbo.img
fastboot flash logo logo.img
fastboot flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot flash misc misc.img (u can get on fastboot rom not .zip)
fastboot flash recovery recovery.img (recommend used twrp-3.3.1-2-davinci-fix).. Russian one
And after those comands do run TWRP auto installer.
U can find those files from fastboot stock ROM. This will save ur data and u won't needed to flash Stock ROM ..
Hope I explained everything if anything else needed comment down below.
Click to expand...
Click to collapse
Could you (or anyone) please provide these files.

Reep1324 said:
Could you (or anyone) please provide these files.
Click to expand...
Click to collapse
Hi, this u can get from fastboot stock Rom, download fastboot stock Rom and extract them u will find.. if need help just tag me ..

farhan20 said:
Hi, this u can get from fastboot stock Rom, download fastboot stock Rom and extract them u will find.. if need help just tag me ..
Click to expand...
Click to collapse
i got the .img file but i cant install it via twrp or fastboot cause this partition is unmountable
do you have any idea? i flashed stock rom via fastboot but the error insists

Dr.Dinel said:
i got the .img file but i cant install it via twrp or fastboot cause this partition is unmountable
do you have any idea? i flashed stock rom via fastboot but the error insists
Click to expand...
Click to collapse
Hello, seems u need to repair ur partition from TWRP.
Also what u did that cause this ?
PS: I'm not expert or anything but I will try to help if I could.

farhan20 said:
Hello, seems u need to repair ur partition from TWRP.
Also what u did that cause this ?
PS: I'm not expert or anything but I will try to help if I could.
Click to expand...
Click to collapse
thanks for replying
i finally solved it, used a chinese twrp that has the option to install on persist partition and the rest was easy

My k20 bricked after install miui 11 Chine version i try to flashing with flash tool but after processing not working "error antirolback check error" please someone help me

hamidezat20 said:
My k20 bricked after install miui 11 Chine version i try to flashing with flash tool but after processing not working "error antirolback check error" please someone help me
Click to expand...
Click to collapse
Hi, please follow this setups and it should be fine .
If you run into errors flashing fastboot images to your device, edit the .bat files that came with it. Usually you want to edit "flash_all.bat"
For "Missmatching image and device":
Remove the lines highlighted in the screenshot from the file, save and try flashing it again.
For Antirollback Error:
Remove ALL lines ABOVE the highlighted lines in the screenshot from the file, save and try flashing it again.
Always make sure that you got the right image for your device. Removing check lines from these files can permanently brick your device if you use the wrong fastboot image.

farhan20 said:
Hi, please follow this setups and it should be fine .
If you run into errors flashing fastboot images to your device, edit the .bat files that came with it. Usually you want to edit "flash_all.bat"
For "Missmatching image and device":
Remove the lines highlighted in the screenshot from the file, save and try flashing it again.
For Antirollback Error:
Remove ALL lines ABOVE the highlighted lines in the screenshot from the file, save and try flashing it again.
Always make sure that you got the right image for your device. Removing check lines from these files can permanently brick your device if you use the wrong fastboot image.
Click to expand...
Click to collapse
like me please help me after installing miui 11 Chine version

hamidezat20 said:
like me please help me after installing miui 11 Chine version
Click to expand...
Click to collapse
U r stuck on fastboot right and u said u can't flash fastboot rom because u r getting anti roll back error so I gave u solution

How to fix this problem
Hello same me how to fixed step by step
First you need fastboot rom extract fastboot rom on your pc after extract find 3 file
1-boot
2-recovery
3-system
Flash with fastboot
Turn off your phone and going to fastboot
Type
Fastboot devices
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Done device can't boot but you can install twrp China version link ?
https://www.lanzous.com/i6ahykh
after installation you can go to twrp
Download fastboot miui install from twrp
Sorry for me English

Oh my god, you saved me!

HI guys i flashed my mi 9t with twrp-3.3.1-2-davinci-fix it worked with miui.eu 9.8.15 after trying to flash miui 11 for about 6 hrs lol, anyway my phone is working but i would like to go back to stock and relock the bootloader but i cant find the mi 9t fastboot rom

timbook2 said:
HI guys i flashed my mi 9t with twrp-3.3.1-2-davinci-fix it worked with miui.eu 9.8.15 after trying to flash miui 11 for about 6 hrs lol, anyway my phone is working but i would like to go back to stock and relock the bootloader but i cant find the mi 9t fastboot rom
Click to expand...
Click to collapse
You're able to flash miui 11 after such long time or just 9.8.15?

farhan20 said:
Hi, please follow this setups and it should be fine .
If you run into errors flashing fastboot images to your device, edit the .bat files that came with it. Usually you want to edit "flash_all.bat"
For "Missmatching image and device":
Remove the lines highlighted in the screenshot from the file, save and try flashing it again.
For Antirollback Error:
Remove ALL lines ABOVE the highlighted lines in the screenshot from the file, save and try flashing it again.
Always make sure that you got the right image for your device. Removing check lines from these files can permanently brick your device if you use the wrong fastboot image.
Click to expand...
Click to collapse
hey i am getting file missmatching image and device error so i deleted those lines from .bat file but still getting the same error

lucifer said:
hey i am getting file missmatching image and device error so i deleted those lines from .bat file but still getting the same error
Click to expand...
Click to collapse
Hi, u deleted from flash all. Bat right and what's the error u r getting?

farhan20 said:
Hi, u deleted from flash all. Bat right and what's the error u r getting?
Click to expand...
Click to collapse
well it worked after i moved the file to c:/ drive but after flashing i lost widewine L1

When I got 9.8.15 working I stopped at least I got a working phone now, I will try and flash stock later.
I got anti rollback error trying to flash stock with miflash tool.