Related
hello, sorry if im writing this in the wrong place. was doing the 3 button download mode fix and i accidently selected the md5 file into the "Phone" instead of putting it in PDA. no i got no network and sim is undected. please help
no when i check firmware, in the phone i got this
phone:unknown
anyone please?
i have now:
pda - I9000BUJM5
PHONE - unknown
CSC - I9000GTCLJM4
I think that you have to reflash again...and no mistakes this time
thanks
reflash with a rom?can it be a custom one or have to be offcial?
i have reflashed it already only with the md5 in the pda
no i have to flash it with a complete rom through odin?thanks
Depends on what you want: A stable eclair rom like jm9 or the latest froyo rom that was released today.Anyways you have to flash with odin and its only one tar file that you must put in the pda part. Some roms here at xda come with 3 files,pda,phone and csc.In that case all you have to do its to put in their places.good luck
nosidefcp said:
anyone please?
i have now:
pda - I9000BUJM5
PHONE - unknown
CSC - I9000GTCLJM4
Click to expand...
Click to collapse
When I try to flash Sc-02B(NTT Docomo,Japan) with other international roms
I also have this problem.
I am now try to find and download the fireware of Sc-02B......
just flash it again and make sure you do it right
nosidefcp said:
thanks
reflash with a rom?can it be a custom one or have to be offcial?
i have reflashed it already only with the md5 in the pda
no i have to flash it with a complete rom through odin?thanks
Click to expand...
Click to collapse
Did it work for you?
guaiwujia said:
When I try to flash Sc-02B(NTT Docomo,Japan) with other international roms
I also have this problem.
I am now try to find and download the fireware of Sc-02B......
Click to expand...
Click to collapse
Did you ever find it?
thisoneguy said:
Did you ever find it?
Click to expand...
Click to collapse
looks like the docomo version has no similarities to anything else out there...
Guys, I need help here, I was checking a "return to stock firmware" guide to make sure I can return to my stock JPF before trying Darky's ROM.
I downloaded my JPF ROM (Arabic) from several sources and it only contains the ROM and the modem, no CSC file, and as I understand I will need this file when flashing the stock firmware again, but I searched everywhere and I can't find it.
Please tell me what to do.
You can find a CWM Flashable .zip file of JPF CSC in my ROM Thread, ADDONS SECTION!
Simple and fast!
Sent from my SGS with Simply™ 2.7 Xtreme ROM
Thanks Simon, I have downloaded it, so the installation instructions are:
- Go to recovery make a backup
- Flash the CSC
- Reboot into recovery again and restore backup
Is this correct? Would you know by any chance where could I get the file that I can flash through ODIN when I am restoring the ROM?
m.shafik said:
Thanks Simon, I have downloaded it, so the installation instructions are:
- Go to recovery make a backup
- Flash the CSC
- Reboot into recovery again and restore backup
Is this correct? Would you know by any chance where could I get the file that I can flash through ODIN when I am restoring the ROM?
Click to expand...
Click to collapse
You could just use darkys OdIN Rom, there is no need to flash back to original fw, no-one has stock fw on his sgs, even a girl I know has JPY
Sent from my GT-I9000 using Tapatalk
Jonathan_m84 said:
You could just use darkys OdIN Rom, there is no need to flash back to original fw, no-one has stock fw on his sgs, even a girl I know has JPY
Click to expand...
Click to collapse
I need to be able to get back to my stock ROM in case I face any issues with Darky's ROM because it works without a hitch, has good battery life and more importantly it has Arabic interface and Arabic Swype keyboards.
And by the way, the girl comment is not really smart. :/
And by the way, the girl comment is not really smart. :/
Give him credit he knows a girl a whole one of them .
CSC use rom kitchin and generate update.zip with csc in it .
http://romkitchen.org/sgs/?s=generator
http://forum.xda-developers.com/showthread.php?t=817703
You might as well then build your own rom through the rom kitchin and flash that after backing up your old one .
jje
JJEgan said:
CSC use rom kitchin and generate update.zip with csc in it .
Click to expand...
Click to collapse
Thanks, I checked this link before posting the question, but they don't have any Arabic CSC file.
m.shafik said:
Thanks, I checked this link before posting the question, but they don't have any Arabic CSC file.
Click to expand...
Click to collapse
I thought that you found the CSC you were looking for, if you are still looking for it then here it is: Download
[Ramad] said:
I thought that you found the CSC you were looking for, if you are still looking for it then here it is: Download
Click to expand...
Click to collapse
Wow, thanks a lot, that's exactly what I was looking for. Did I say thanks? You made my day.
m.shafik said:
Wow, thanks a lot, that's exactly what I was looking for. Did I say thanks? You made my day.
Click to expand...
Click to collapse
Glad that I could help, good luck
Hi Guys,
I am a novice when it comes to android. I want to root my SGS I9000T and I looked around a lot, but my problem is it seems like it is firmware specific and mine seems to be quire rare.
So here is my firmware specs. If somebody has either the stock files for this version or the files needed to root this version, please provide me of the link. And yes I did look on the samfirmware but it is not there. Or maybe there is a way to root that is not firmware specific?
Any help would be helpful
There is nothing firmware specific about rooting. Just flash speedmod k13e (not k15i thats GB kernel), then boot into recovery and root from the advanced speedmod option. Afterwards you can flash the stock kernel back if you want (It´s the zImage file from your install files) You use a tool called Odin to flash, many tutorials around on how to use it...
Thanks for the reply. I have a question for you: When you flash speedmod do you actually change your firmware? If so, that would be a problem because I cannot find my stock firmware? I am trying to root to be able to nandroid to actually get the firmware.
caribbean_spur said:
Thanks for the reply. I have a question for you: When you flash speedmod do you actually change your firmware? If so, that would be a problem because I cannot find my stock firmware? I am trying to root to be able to nandroid to actually get the firmware.
Click to expand...
Click to collapse
I already posted the I9000TUBJP9 rom on the other thread it's the official kies download , let me clarify this,if you upgrade to oficial I9000TUBJVE gb you can go back directly to UBJP9 froyo because have the same bootloaders ,but if you flash other rom than the official for the I9000T go back to the stock eclair or gingerbread
I9000TUBJP9 http://www.multiupload.com/7GKMJEL7PA
caribbean_spur said:
Thanks for the reply. I have a question for you: When you flash speedmod do you actually change your firmware? If so, that would be a problem because I cannot find my stock firmware? I am trying to root to be able to nandroid to actually get the firmware.
Click to expand...
Click to collapse
No, you change the kernel. You should also be able to root with SuperOneClick, search for it in the forums, you dont have to replace the kernel with this method.
v4mp1 said:
I already posted the I9000TUJV9 rom on the other thread it's the official kies download , let me clarify this,if you upgrade to oficial I9000TUBJVE gb you can go back directly to UBJP9 froyo because have the same bootloaders ,but if you flash other rom than the official for the I9000T go back to the stock eclair or gingerbread
I9000TUBJP http://www.multiupload.com/7GKMJEL7PA
Click to expand...
Click to collapse
Thanks so much! I am guessing you mistypes, but my current version is I9000TUBJP9 (and this is what the file you gave me says) and the version of GB I will be getting through Kies is UBJV6 (not BJVE), right?
So, if I update to GB and want to go back to UBJP9, all I have to do is flash the only tar file extracted from the files you gave me? The flashing methods I read were talking about pit file, pda files and repartion files. I don't need any of that?
{Angel} said:
No, you change the kernel. You should also be able to root with SuperOneClick, search for it in the forums, you dont have to replace the kernel with this method.
Click to expand...
Click to collapse
Thanks a lot for the help. I read up about superoneclick and it should work if I decide to stay on Froyo but won't work if I make the jump to GB. I will try to see if the CF method or the oneclick method work for GB. I am assuming I will find a method that will root GB. I did read a little about the supermod you mentioned to me, but I got confused because I found guide to flash it but they said I needed to be rooted .
caribbean_spur said:
So, if I update to GB and want to go back to UBJP9, all I have to do is flash the only tar file extracted from the files you gave me? The flashing methods I read were talking about pit file, pda files and repartion files. I don't need any of that?
Click to expand...
Click to collapse
Yes, you can go back GB flashing the the tar file on PDA ,the othe method if you use rom not made for the i9000t
v4mp1 said:
Yes, you can go back GB flashing the the tar file on PDA ,the othe method if you use rom not made for the i9000t
Click to expand...
Click to collapse
Thanks so much! Last question. For this type of flash do I need to be rooted?
caribbean_spur said:
Thanks so much! Last question. For this type of flash do I need to be rooted?
Click to expand...
Click to collapse
Well if what you wanted was to move to GB then why the heck didn't you just say that from the beginning and spared us all this useless talk of rooting your phone?? If you dont have a clue about how to do something then its best to say what you want from the get go.
In this case just download whatever firmware you want and flash with Odin, no need to be rooted. Make sure to flash a 850 modem afterwards to get 3G back if you flash a european rom. Check the stickies, plenty of guides on how to flash with Odin and threads with modem files.
Good luck mate.
caribbean_spur said:
Thanks so much! Last question. For this type of flash do I need to be rooted?
Click to expand...
Click to collapse
You can go back and forth with Froyo and GB on Odin with ease. I've done it plenty of times, just make sure that you have repartition checked with the stock files correctly placed in Odin...
Sent from my GT-I9000 using xda premium
Well no need to be nasty! I was pondering if I am going to GB since the first time I did it did not go well, so I am weighing my options. I appreciate that you help me and but I do not appreciate the condescending talk. Everything you guys told me was very useful and I do want to root I was taking one thing at a time.
I read the forum( yes I did) and I have decided that it might be best for me to stay on Froyo for now. and I am planing to root to be able to try other stuff. So again yes you helped me and no it was not useless talk. Thanks again.
i have plan to flash my p3100 stock rom to cm9 4.0.4, this rom sound like interesting, but i havent test it yet.
i must to know how to flash back stock rom if i got the trouble.
can someone explain how to get back stock rom with use any tools or anything else?
thanks for everyone
Download the correct firmware from sammobile.com or samfirmware.com and reflash it in odin.
thanks bro..
yamani_25 said:
thanks bro..
Click to expand...
Click to collapse
can you please give a brief on the flashing.
I have downloaded the firmware. But i don't know which option to use in odin
I'm in India. The image is a single .md5 tar with everything bundled as one.
Thanks.
Sent from my GT-P3100 using xda app-developers app
jackscorp said:
can you please give a brief on the flashing.
I have downloaded the firmware. But i don't know which option to use in odin
I'm in India. The image is a single .md5 tar with everything bundled as one.
Thanks.
Actually i am not success yet to flash cm9. but i have cmw that fulled help me to bring the rom stock back.
You must have cmw for back up your tab, flash the rom, kernel etc..
may be these links can help you
http://www.sammobile.com/forum/showthread.php?t=6060
http://www.sammobile.com/forum/showthread.php?t=5964
rgd
Click to expand...
Click to collapse
Looking to sell it and need it back to stock. Any info is appreciated. Thanks!
skoo74 said:
Looking to sell it and need it back to stock. Any info is appreciated. Thanks!
Click to expand...
Click to collapse
Try SamMobile.com
skoo74 said:
Looking to sell it and need it back to stock. Any info is appreciated. Thanks!
Click to expand...
Click to collapse
You download, extract from the zip, and flash this tar.md5 file using Odin v3.09. It will restore the tablet to factory new stock. If you're in Canada, don't download this, but let me know, and I'll get you the proper file within about an hour from now. Hope this helps
Thanks. I'll try this when I get home.
Ok, downloaded the T230NUUEU0ANK2_T230NUXAR0ANK2_XAR.zip file and tried to extract it and it's corrupted... any other ideas?
found it here...
http://forum.xda-developers.com/showthread.php?t=2778374
skoo74 said:
Looking to sell it and need it back to stock. Any info is appreciated. Thanks!
Click to expand...
Click to collapse
You can flash an earlier version and then upgrade over the air.