Database Users

[Q] [Help] Bricked UMI ZERO

Hey people, can anyone get me a MTK droid backup of UMI ZERO? I need it to see if i can recover my bricked UMI
pleaaasseee.....
Also, it seems my scatter file backup from MTK does not have all t info?? and SP flashtools does not accept the ones included in the Ota-updates... so if anyone please can also get me a good scatter file ... i would be much apreciated.

Hello, you can get the rom including scatter file from Needrom! Just flash trough sp tool and you will be fine.
Sent from my UMI ZERO using XDA Free mobile app

I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway

reisamm said:
I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway [/QUOTE
please tell me how did you make it work...as i am in the same boat..the pc wont recognise it
Click to expand...
Click to collapse

reisamm said:
I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway
Click to expand...
Click to collapse
please tell mew how you did it . i am so upset that my phone is absoluteley dead

Hi there raducux,
Well, this was about another situation, but mixing with ROM's cooking I was able to brick it again it was mrsim who help me (mod at china-devices.com, credit where is due). But I will tell you how I did it.
You need to have the adb android drivers installed and flashtool v5.1 or up (the one I used, but some people use the 3.1 version).
Download this ROM from needrom (scatter file compatible with FT).
Link: http://www.needrom.com/wp-content/uploads/2014/11/Y800_UMI_20141104_1907xx-s7yler.zip or
http://www.needrom.com/download/umi-zero/
Extract, and in flashtools select the scatter file inside the directory you extracted. Press flash, and (after pressing flash) connect the phone to the USB port holding the volume down key (so the phone connects in META mode), and the process should begin.
If all works well after flashing the phone should boot the new ROM, its version 3.01 so you have to upgrade it.
If that does not work, tell me a few things... I suppose the phone does not start or appear the 'Zero' logo, but tell me if when you connect it to the computer you ear the normal plugin USB sound?
FlashTools (all versions)
http://helpadude.com/sp-flash-tools/
Universal ADB Driver
http://www.needrom.com/download/universal-adb-driver/
Tell me if it worked, or if you need more help tell me what happened and how the phone responds. lot of people here also that can help. My 1st thing I check when buying a new phone (for many years now), is if it's 'XDA' Supported...
cheers

reisamm said:
Hi there raducux,
Well, this was about another situation, but mixing with ROM's cooking I was able to brick it again it was mrsim who help me (mod at china-devices.com, credit where is due). But I will tell you how I did it.
You need to have the adb android drivers installed and flashtool v5.1 or up (the one I used, but some people use the 3.1 version).
Download this ROM from needrom (scatter file compatible with FT).
Link: http://www.needrom.com/wp-content/uploads/2014/11/Y800_UMI_20141104_1907xx-s7yler.zip or
http://www.needrom.com/download/umi-zero/
Extract, and in flashtools select the scatter file inside the directory you extracted. Press flash, and (after pressing flash) connect the phone to the USB port holding the volume down key (so the phone connects in META mode), and the process should begin.
If all works well after flashing the phone should boot the new ROM, its version 3.01 so you have to upgrade it.
If that does not work, tell me a few things... I suppose the phone does not start or appear the 'Zero' logo, but tell me if when you connect it to the computer you ear the normal plugin USB sound?
FlashTools (all versions)
http://helpadude.com/sp-flash-tools/
Universal ADB Driver
http://www.needrom.com/download/universal-adb-driver/
Tell me if it worked, or if you need more help tell me what happened and how the phone responds. lot of people here also that can help. My 1st thing I check when buying a new phone (for many years now), is if it's 'XDA' Supported...
cheers
Click to expand...
Click to collapse
indeed. i too have been messing on xda a lot for a long time.
i managed to get into twrp again.
so that must be good...after. the battery died..;.butr mtk preloader doesnt instal;l
please tell me..first i need to hit download only...and after that.... ? the steps are a bit missleding .
---------- Post added at 03:10 PM ---------- Previous post was at 02:58 PM ----------
i managed to bioot the device in emui !!!! this morning..i could acces twrp. pressing volume down when connected to pc ..and the chinesse recovery pressing volume up ... rootjoy cant flash the device as it sais it is unsupported, now...i reeallly need to know the steps for going back to stock
---------- Post added at 03:29 PM ---------- Previous post was at 03:10 PM ----------
i am running antarct s emui . with twrp recovery... i need dto know the sp flash tools steps correctly to flash back to stock
preloader doesnt install correctly in pc because volume down...takes me to twrp...and volume up...to the chinesse recovery of huawei,
so preloader starts installing, but when in recovery..it gets dissconected

Could you tell how did you put it in meta mode? I have a Zero with no preloader and in windows it shows up as unknown device. No matter how I try to boot it up (vol- vol+). Other than showing in windows, it's dead. Is there a way to revive ti?

Hard bricked Galaxy grand 2 sm-g7102

I was trying to flash my grand 2 with flash tool and it formatted the phone but with a problem. Now the phone no longer boot. No soft key works. It's just dead. Is it possible to use flash tool to fix the phone? When I connect it to the computer it sees it because I have mtkpreloader driver installed. Apparently that's the only software recognizing the phone. I can't use odin because it won't boot into recovery. How can I lay hands on the phone's dump files? The dump is suppose to have android scatter file in it along with img files such preloader, mbr, uboot, bootimg, recovery, android, etc. If you have a link to this file please upload it. Or if there's a better method please I'd like to know. Keep in mind that JTAG isn't an option for me.
Sent from my Lenovo P70-A using XDA Free mobile app

any updates ???
i have the same prob

Can u get into download mode?

Try to hold and press vloume down+home+power key wait for some moments then realised the buttom and press volume up the connect to your pc see wether odin is detect your mobile if not be sure samsung driver are installed
If above methode not work the use jtag search on google
And last one but my favorite method
Use sdc img for debrick
http://galaxymediaone.blogspot.in/2014/10/samsung-galaxy-grand-2-dead-boot_31.html
Note
you can install any framware
Samsung galaxy grand 2 drivers
http://androidxda.com/download-samsung-usb-drivers

G.NO_BOYz said:
Can u get into download mode?
Click to expand...
Click to collapse
NO
---------- Post added at 11:25 PM ---------- Previous post was at 11:11 PM ----------
android_smater said:
Try to hold and press vloume down+home+power key wait for some moments then realised the buttom and press volume up the connect to your pc see wether odin is detect your mobile if not be sure samsung driver are installed
If above methode not work the use jtag search on google
And last one but my favorite method
Use sdc img for debrick
http://galaxymediaone.blogspot.in/2014/10/samsung-galaxy-grand-2-dead-boot_31.html
Note
you can install any framware
Samsung galaxy grand 2 drivers
http://androidxda.com/download-samsung-usb-drivers
Click to expand...
Click to collapse
can i then directly install cm12

kai.verma said:
NO
---------- Post added at 11:25 PM ---------- Previous post was at 11:11 PM ----------
can i then directly install cm12
Click to expand...
Click to collapse
No dude it will help you to debrick the phone and help you to install stock framware
After install simply install any custom recovery then you can install any custom rom

android_smater said:
No dude it will help you to debrick the phone and help you to install stock framware
After install simply install any custom recovery then you can install any custom rom
Click to expand...
Click to collapse
ok man hope for the best downloaded that fine now getting ATF v11.70
is there any video tut of it as im new to this

android_smater said:
No dude it will help you to debrick the phone and help you to install stock framware
After install simply install any custom recovery then you can install any custom rom
Click to expand...
Click to collapse
all its saying is No ATF Box Found

https://m.youtube.com/watch?v=1KiNuBNRb7w
Try this video tuto...
And if not found atf file then goto to this thread you will found the atf file in a post i forget which post is that
http://forum.xda-developers.com/gal...te-debrick-image-hard-brick-sm-g7102-t2819822
Here is atf file
http://www.4shared.com/download/uSZXFbumba/SM-G7102_442_8GB_G7102XXUBNH6.sdc?lgfp=3000

android_smater said:
https://m.youtube.com/watch?v=1KiNuBNRb7w
Try this video tuto...
And if not found atf file then goto to this thread you will found the atf file in a post i forget which post is that
http://forum.xda-developers.com/gal...te-debrick-image-hard-brick-sm-g7102-t2819822
Here is atf file
http://www.4shared.com/download/uSZXFbumba/SM-G7102_442_8GB_G7102XXUBNH6.sdc?lgfp=3000
Click to expand...
Click to collapse
but i dont have atf box
anyother way around it ?

My Samsung Galaxy grand 2 7102 is not going in download mode by SDC

ZUK Z1 Hard Bricked!!!

please help me unbricking my device currently i am unable to boot into edl, fastboot or recovery. The phone keeps on vibrating and no display.
What i did wrong was that I tried flashing a custom boot logo as said in a thread and flashed splash.img and it resulted in this.
Please help me!!!

Akshatpunj said:
please help me unbricking my device currently i am unable to boot into edl, fastboot or recovery. The phone keeps on vibrating and no display.
What i did wrong was that I tried flashing a custom boot logo as said in a thread and flashed splash.img and it resulted in this.
Please help me!!!
Click to expand...
Click to collapse
ok here what u do:
1. I know the device isn't getting charged, no logo.no recovery,no flash-boot,even won't get detected on windows but,don't panic... first thing is to believe in urself that u can fix that device...
2.. second powering of ur device, so to do that observe the vibrate pattern carefully... very carefully... you'll notice while holding up the power after some vibrations(for me 12) it'll skip one vibration.that's the moment my friend release the power button.
3. so now u have to flash the ROM with QFIL & the cyanogen QFIL file ...
4. now before get into the process make sure u download all the drivers(ZUK drivers & Qualcomm Drivers)
5. installing drivers:
boot ur system into the state that ensures driver signature verification is disabled install zuk drivers if u haven't.
now install Qualcomm Drivers depending upon ur system
6. install Qpst
7. now unzip the ROM.
8. run Qpst as admin
9. select the flat build mode on Qpst and browse the extracted rom folder...u'll get to see the ".mbn " file, select it , load XML
10. now the most important thing press the vol+ button and plug the device (it won't get detected),now after 1sec of pluging it press power button it''ll get detected and press the download button ....
11. wait for the flash....get a cup of coffee..
12. u'll get a messege like download success... u r done mate..
links :
drivers: https://mega.nz/#!FJRH2b6B!QlS9-7ppEiP9Nw_htWSMtYQWOk9KDxDxImtJZ66usaw
QPST: https://mega.nz/#!dcAQgSZT!C5JhNLnsOru6y_cX52yGzMkgfnriBY0am7nW45Bzsm0
rom: https://mega.nz/#!dFpn3BYb!Eq2i2ldpA8UJnlkjijCh4fM7EdLSaleWBRmW5rJNI84

ADDICTED777 said:
ok here what u do:
1. I know the device isn't getting charged, no logo.no recovery,no flash-boot,even won't get detected on windows but,don't panic... first thing is to believe in urself that u can fix that device...
2.. second powering of ur device, so to do that observe the vibrate pattern carefully... very carefully... you'll notice while holding up the power after some vibrations(for me 12) it'll skip one vibration.that's the moment my friend release the power button.
3. so now u have to flash the ROM with QFIL & the cyanogen QFIL file ...
4. now before get into the process make sure u download all the drivers(ZUK drivers & Qualcomm Drivers)
5. installing drivers:
boot ur system into the state that ensures driver signature verification is disabled install zuk drivers if u haven't.
now install Qualcomm Drivers depending upon ur system
6. install Qpst
7. now unzip the ROM.
8. run Qpst as admin
9. select the flat build mode on Qpst and browse the extracted rom folder...u'll get to see the ".mbn " file, select it , load XML
10. now the most important thing press the vol+ button and plug the device (it won't get detected),now after 1sec of pluging it press power button it''ll get detected and press the download button ....
11. wait for the flash....get a cup of coffee..
12. u'll get a messege like download success... u r done mate..
links :
drivers: https://mega.nz/#!FJRH2b6B!QlS9-7ppEiP9Nw_htWSMtYQWOk9KDxDxImtJZ66usaw
QPST: https://mega.nz/#!dcAQgSZT!C5JhNLnsOru6y_cX52yGzMkgfnriBY0am7nW45Bzsm0
rom: https://mega.nz/#!dFpn3BYb!Eq2i2ldpA8UJnlkjijCh4fM7EdLSaleWBRmW5rJNI84
Click to expand...
Click to collapse
Thank you sooooooo muchh!!! I almost tried everything and lost hope! This method worked like a miracle, i wish i could hit the thanks button a 1000 times! Thanks again!

Akshatpunj said:
Thank you sooooooo muchh!!! I almost tried everything and lost hope! This method worked like a miracle, i wish i could hit the thanks button a 1000 times! Thanks again!
Click to expand...
Click to collapse
Always remember mate...
Computers & smartphones are such a thing u can't damage them until and unless u broke them... so do whatever u wanna try ... test them out... so be productive n believe in urself that u can..

ADDICTED777 said:
Always remember mate...
Computers & smartphones are such a thing u can't damage them until and unless u broke them... so do whatever u wanna try ... test them out... so be productive n believe in urself that u can..
Click to expand...
Click to collapse
Sure, thanks for the advice.
Btw were you able to change the splash.img/boot logo?

This state isn't named as it is hard bricked ...if it was it won't even vibrate at all...that's we call it as a hard bricked device... it was soft bricked .... in a BOOOOOOOTLOOOOOOOOOOP...
There r various type of bootloops
---------- Post added at 06:54 PM ---------- Previous post was at 06:49 PM ----------
Akshatpunj said:
Sure, thanks for the advice.
Btw were you able to change the splash.img/boot logo?
Click to expand...
Click to collapse
Oh yeah two times...listen here the main thing for the devices is to choose the r8 image...should be less then 200kb & as much as less color... make sure to do it with 16bit(or less) for PNG

ADDICTED777 said:
This state isn't named as it is hard bricked ...if it was it won't even vibrate at all...that's we call it as a hard bricked device... it was soft bricked .... in a BOOOOOOOTLOOOOOOOOOOP...
There r various type of bootloops
---------- Post added at 06:54 PM ---------- Previous post was at 06:49 PM ----------
Oh yeah two times...listen here the main thing for the devices is to choose the r8 image...should be less then 200kb & as much as less color... make sure to do it with 16bit(or less) for PNG
Click to expand...
Click to collapse
Oh ok! I thought i hard bricked my device but luckily you helped me
Okay i will try to change boot logo tomorrow again. Thanks a lot!

Akshatpunj said:
Oh ok! I thought i hard bricked my device but luckily you helped me
Okay i will try to change boot logo tomorrow again. Thanks a lot!
Click to expand...
Click to collapse
Yo there is a button for that ...u know I'm kind of GREEDY...

ADDICTED777 said:
Yo there is a button for that ...u know I'm kind of GREEDY...
Click to expand...
Click to collapse
Already done...

ADDICTED777 said:
Always remember mate...
Computers & smartphones are such a thing u can't damage them until and unless u broke them... so do whatever u wanna try ... test them out... so be productive n believe in urself that u can..
Click to expand...
Click to collapse
I have the same problem. I went to flash a boot image and I messed up. QFIL does not detect my phone maybe beacuse Qualcomm drivers are not getting installed using the INF file.
I have shut the vibrations using the power button step. But as soon as I plug it in with volume up held down, it starts all over again.
---------- Post added at 12:26 PM ---------- Previous post was at 11:43 AM ----------
I have disabled the driver signature verification while rebooting using F8 key.
However, I still get the same error message while installing the INF file that The INF file you selected does not support this method of installation.
---------- Post added at 12:36 PM ---------- Previous post was at 12:26 PM ----------
Please help!!!!

Sahaj Desai said:
I have the same problem. I went to flash a boot image and I messed up. QFIL does not detect my phone maybe beacuse Qualcomm drivers are not getting installed using the INF file.
I have shut the vibrations using the power button step. But as soon as I plug it in with volume up held down, it starts all over again.
---------- Post added at 12:26 PM ---------- Previous post was at 11:43 AM ----------
I have disabled the driver signature verification while rebooting using F8 key.
However, I still get the same error message while installing the INF file that The INF file you selected does not support this method of installation.
---------- Post added at 12:36 PM ---------- Previous post was at 12:26 PM ----------
Please help!!!!
Click to expand...
Click to collapse
u need a video tutorial that shows how to install .inf file
here is the one:
https://www.youtube.com/watch?v=lJ7WTRW7psA
Now before u proceed make sure u have disabled the driver signature verification.

ADDICTED777 said:
u need a video tutorial that shows how to install .inf file
here is the one:
Now before u proceed make sure u have disabled the driver signature verification.
Click to expand...
Click to collapse
I did it using Qualcomm drivers in .exe format.
Now the phone is working fine.

Sahaj Desai said:
I did it using Qualcomm drivers in .exe format.
Now the phone is working fine.
Click to expand...
Click to collapse
:good::good::good:

Hei!!! You are the best. I followed your instructions and it seems it works 100%. You saved my day. I cant thank you enough.

ADDICTED777 said:
ok here what u do:
1. I know the device isn't getting charged, no logo.no recovery,no flash-boot,even won't get detected on windows but,don't panic... first thing is to believe in urself that u can fix that device...
2.. second powering of ur device, so to do that observe the vibrate pattern carefully... very carefully... you'll notice while holding up the power after some vibrations(for me 12) it'll skip one vibration.that's the moment my friend release the power button.
3. so now u have to flash the ROM with QFIL & the cyanogen QFIL file ...
4. now before get into the process make sure u download all the drivers(ZUK drivers & Qualcomm Drivers)
5. installing drivers:
boot ur system into the state that ensures driver signature verification is disabled install zuk drivers if u haven't.
now install Qualcomm Drivers depending upon ur system
6. install Qpst
7. now unzip the ROM.
8. run Qpst as admin
9. select the flat build mode on Qpst and browse the extracted rom folder...u'll get to see the ".mbn " file, select it , load XML
10. now the most important thing press the vol+ button and plug the device (it won't get detected),now after 1sec of pluging it press power button it''ll get detected and press the download button ....
11. wait for the flash....get a cup of coffee..
12. u'll get a messege like download success... u r done mate..
Click to expand...
Click to collapse
hey bro I just accidentally rebooted my zuk z1 in edl mode via all in one tool, but after rebooting in edl mode, screen went off and it didn't boot up again and now pc is not recognizing my device nor does the qfil detects it, its power button does not work so tried it while holding the volume up button but it's not working. I have got qpst file and zuk drivers are also installed. now please someone help me out bro. ;(

Walter Black said:
hey bro I just accidentally rebooted my zuk z1 in edl mode via all in one tool, but after rebooting in edl mode, screen went off and it didn't boot up again and now pc is not recognizing my device nor does the qfil detects it, its power button does not work so tried it while holding the volume up button but it's not working. I have got qpst file and zuk drivers are also installed. now please someone help me out bro. ;(
Click to expand...
Click to collapse
keep it charged overnight... fix the power button...then try the mentioned method...

ZUK Z1 Hard Bricked
Greetings, everyone. I've got a hard bricked zuk z1 which just went into the state all of a sudden.
I was using lineage o.s pie roms, and had faced some Random Reboots also. Not sure what happened, but here's what i did:
Installed zuk drivers
installed qualcomm drivers
installed adb and fastboot(minimal abd and fastboot)
installed qfil, which comes with QPST v2.7.0.460
--------------------------------------------------------------------------------
Downloaded the zuk stock firmware files
pressed vol+ and plugged the usb
Got detected in 9008 mode
QFIL also detected it and chose the correct files and started downloading in FLAT build
mode
now, QFIL shows this error at the end:-
Code:
10:17:52: INFO: Looking for file 'gpt_main0.bin'
10:17:52: INFO: Looking for file 'gpt_backup0.bin'
10:17:52: INFO:
Total to be tansferd with <program> or <read> is 78.85 MB
10:17:52: INFO: Sending <configure>
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
10:18:17: {ERROR: Could not write to '\\.\COM3', Windows API WriteFile failed! Your device is probably *not* on this port, attempted 100 times}
Writing log to 'C:\Users\HARRY\AppData\Roaming\Qualcomm\QFIL\COMPORT_3\port_trace.txt', might take a minute
Log is 'C:\Users\HARRY\AppData\Roaming\Qualcomm\QFIL\COMPORT_3\port_trace.txt'
Download Fail:FireHose Fail:FHLoader Fail:Process fail
Finish Download
Hope someone can help me . Oh, by the way, the bricking is like "fully-dead" bricking. No vibrations, display, led, nothing.
I feel i haven't done anything wrong in the steps also. SO, How to decode this situation??

i am face same problem "help please expert" my zuk z1 show logo and blew light after 10se not display on screen when touch with pc via usb many partition opening with error how to solve it

Hard partition damaged
helo expert zuk z1 vibrate and show blue light black screen no display after firmware via qfil completed on PC many partition apeared not writeable only show a partition with "image" folder in witch all firmware file stored who write via qfil

naseera422 said:
helo expert zuk z1 vibrate and show blue light black screen no display after firmware via qfil completed on PC many partition apeared not writeable only show a partition with "image" folder in witch all firmware file stored who write via qfil
Click to expand...
Click to collapse
Hello there!. As far as i know, from what you've said,
The phone still vibrates and shows led, which is a good thing.
About the qfil:
Check whether you are using the latest version of QFIL. Many errors did arise while using the earlier ones.
Make sure you haven't messed up any QFIL configuration settings, and check whether the selected build type is "FLAT".
If you are having trouble with the current firmware files, then download another one for the zuk z1, and check if it works. This is because errors can come from wrong/bad programmer files.
::::: This is all assuming that there are no driver issues & that you know well, how to work with QFIL :::::
Hope this helps....

XT1766 Hard Bricked....!!

Hi,
After Flash With Wrong Firmware My Phone(XT1766) Is Just Detected As Qualcomm 9008 Device And Not Powering ON.. Can Some One Kindly Provide Me Blank Flash File Or Any Other Solution For This Model..??

i did the same thing
i need help too because i did the same thing....trying to repair apn i just killed my moto e4 xt1766 and there is no fastboot .....please any solution???

If it detects phone Qcom 9008 you can still fix phone by using special emmc write tool ( hard to find ) but there are some on interwebs ....search on Google * try this one ALTHOUGH I HAVEN'T TESTED IT*
I fix QCOM Lg device like that
If your phone is dead dead dead you must Google video on test point ...with test point( shorting your board ) ...phone will detect on usb as Qcom 9008 then you need special Qcom tool like above
*Don't remember name of emmc tool I used on LG*.

Even If We Are Able To Connect It Via Any Qualcomm Tool We Don't Have Appropriate Files Available To Revive It..
So I Think For Now There Is No solution For It( Until Any Developer, Programmer Comes Up With One)..
So I Really Hope Some One Is Working On It As Many Peoples Have Bricked This Model While Flashing It..

prince_arsalan said:
Even If We Are Able To Connect It Via Any Qualcomm Tool We Don't Have Appropriate Files Available To Revive It..
So I Think For Now There Is No solution For It( Until Any Developer, Programmer Comes Up With One)..
So I Really Hope Some One Is Working On It As Many Peoples Have Bricked This Model While Flashing It..
Click to expand...
Click to collapse
Just download this OFFICIAL TOOL FROM QUALCOMM called QPST and see if it can get your device as far as fastboot at which point you can flash files from custom recovery to custom rom
The article is about IMEI but it can do more
https://www.androidbrick.com/ultima...agon-xiaomi-mi5-imei-and-baseband-repair-fix/
---------- Post added at 07:29 AM ---------- Previous post was at 07:19 AM ----------
This QualcommProductSupporTool is official tool ...
1. Ask one guy on stock to dump
2. Use this tool and guide to put dump on phone
https://www.androidbrick.com/unbric...-have-the-right-kind-of-rom-qhsusb_dload_edl/
OR TRY TO PULL STOCK WITH THIS QUALCOMM. TOOL
https://androidmtk.com/download-qualcomm-sw-downloader
*DON'T be lazy your phone won't unbrick solo and nobody can make one button unbrick untool .

KevMetal said:
Just download this OFFICIAL TOOL FROM QUALCOMM called QPST and see if it can get your device as far as fastboot at which point you can flash files from custom recovery to custom rom
The article is about IMEI but it can do more
https://www.androidbrick.com/ultima...agon-xiaomi-mi5-imei-and-baseband-repair-fix/
---------- Post added at 07:29 AM ---------- Previous post was at 07:19 AM ----------
This QualcommProductSupporTool is official tool ...
1. Ask one guy on stock to dump
2. Use this tool and guide to put dump on phone
https://www.androidbrick.com/unbric...-have-the-right-kind-of-rom-qhsusb_dload_edl/
OR TRY TO PULL STOCK WITH THIS QUALCOMM. TOOL
https://androidmtk.com/download-qualcomm-sw-downloader
*DON'T be lazy your phone won't unbrick solo and nobody can make one button unbrick untool .
Click to expand...
Click to collapse
Nothing is working no appropriate file to flash?? Where we claim for that?

any body have blank flash file ?

Need blankflash
i think if someone just find the blankflash for this model it can be flashed whit UAT ....in qualcomm module because this tool recognize the QLOADER 900 port but i dont have any file who works to flash this model .......

Hi
Moto e4 plus XT1776 Qualcomm hard brick please need blankflash file

aminsagar1 said:
Moto e4 plus XT1776 Qualcomm hard brick please need blankflash file
Click to expand...
Click to collapse
Wrong forum. Go to the plus section. But I don't think anyone has that file.

Try the answer in my thread. It worked for me. Just boot to Fastboot and use RSD Lite (I used v6.2.4) and flash the Zip file linked in that thread. I had to manually unzip the file because RSD couldn't handle the long filenames on its own, but if you unzip it and select flashfile.xml inside the folder, it should work.
https://forum.xda-developers.com/moto-e4/help/soft-bricked-boost-moto-e4-stock-t3803233

chuman72486 said:
Try the answer in my thread. It worked for me. Just boot to Fastboot and use RSD Lite (I used v6.2.4) and flash the Zip file linked in that thread. I had to manually unzip the file because RSD couldn't handle the long filenames on its own, but if you unzip it and select flashfile.xml inside the folder, it should work.
https://forum.xda-developers.com/moto-e4/help/soft-bricked-boost-moto-e4-stock-t3803233
Click to expand...
Click to collapse
So the one I linked worked?

we have blank flash for XT1767 but not for XT1766 ....
maybe someone from inside the motorola would leak it in the future

hi
aamszia said:
we have blank flash for XT1767 but not for XT1766 ....
maybe someone from inside the motorola would leak it in the future
Click to expand...
Click to collapse
can u please shere the blank flash file for xt1767

prince_arsalan said:
Hi,
After Flash With Wrong Firmware My Phone(XT1766) Is Just Detected As Qualcomm 9008 Device And Not Powering ON.. Can Some One Kindly Provide Me Blank Flash File Or Any Other Solution For This Model..??
Click to expand...
Click to collapse
Yes we have solution for moto E4 XT1766 Sprint Sperry
https://www.youtube.com/watch?v=dDldcWPEALI

Hi
Can you share that software pls?

xt1766 & xt1767 dead boot repair with usb solution without touch emmc
click here to download files&instructions
https://mega.nz/#!QvQzGIKD!HhY-xK1eLqYx2u5JRz6VCPMoCJvJNG3cEBQOPf7e1QI
password
xpertgsm

irfang0349 said:
click here to download files&instructions
https://mega.nz/#!QvQzGIKD!HhY-xK1eLqYx2u5JRz6VCPMoCJvJNG3cEBQOPf7e1QI
password
https://mega.nz/#!MuIDnILb!eJmmo7IWMLi7DLcsALGKvIVSaKCr9_KjFCnaENeHIYY
Click to expand...
Click to collapse
Waste Of One KB of My Internet ......
He wants money lol .......

Might have some potential here for xt1766 anyways.

XT1766 hardbrick stuck in 9008 mode would normally require a blankflash. However, as is common in most Motorola models there is a boot from SD option that is automatically defaulted to in the case that the bootloader has been deleted or damaged. To use this boot from SD option you simply extract the bootloader to a blank sd card and insert it into the phone then reboot
Here is a bootloader provided to me (Untested)
mediafire.com/file/t2su47wbd3dizue/XT1766-BOOTLOADER.img/file

Sharp Z2 brick, no fastboot, black screen, not booting

Hi @xda Team,
couldn't find any threads releted to Sharp Z2, which would match to my issue, so that's why I'm trying it in this forum.
I have Sharp Z2 phone (https://www.gsmarena.com/sharp_z2-8410.php).
I tried to root it and to install/flash TWRP recovery on it. Because of realy less information for this phone it was difficult to find proper files.
So I tried with an official version of TWRP.... didn't worked.... after long time, I found on an chineese forum some instructions for flashing the TWRP through ADB/Fastboot.
Bacause I have successfully used this technology already several times on other phones, I was happy to have finaly found something AND forgot to check the skripts
The result is, that after unsuccessfully flashing the bootloader got blocked trough this script (OEM blocked). Now my phone is not booting. I have no access to FASTBOOT and to RECOVERY mode.
I have found an unbrick instruction for LeEco s3 (based on x620) using the SP Flashtool (I have used it successfully for my other phone LeEco S3).
Following this intruction on my Sharp I'm getting following message:
"BROM ERROR: STATUS_SEC_PL_VFV_FAIL......."
It looks to my, that I have not all permissions to flash the phone.
SO still NOT BOOTING, NO ACCESS to FASTBOOT AND TO RECOVERY MODE.
Also on XDA Forum I found this guide for an ASUS Phone (https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785)
UPDATE:
SP Flashtool is not able to load the preloader file. Always stops with the same error: BROM ERROR: STATUS_SEC_PL_VFV_FAIL......."
In some forums I've read that flashing with wrong preloader can cause my issue and that in this case there is nothing there to save / recover the phone.
I still hope, that because of the Android OS there is still a chae to unbrick it.
Please HELP!!!
Thanks in advance.

mine is in a similar state but i still have access to the fastboot; i can reboot to bootloader or recovery but only to acccess fastboot. there is no recovery tool left on it and attempt to flash twrp - various versions of those have all been failed attempts. handset is still in the brick state with access to fastboot but no use.
please help to get this working again, given the fastboot is working, can i use any other recovery tool except for twrp to maybe get to having OS flashed?

Hi. On the forum 4pda have firmware under flashtool

can anybody provide correct preloader file for this phone (Sharp Z2 FS8002).?

taulu7 said:
Hi. On the forum 4pda have firmware under flashtool
Click to expand...
Click to collapse
Port Miui Hellas TEAM, my logo and splashlogo
HTML:
https://www.needrom.com/download/twrp-for-sharp-z2/
---------- Post added at 04:00 PM ---------- Previous post was at 03:57 PM ----------
VanDragon said:
can anybody provide correct preloader file for this phone (Sharp Z2 FS8002).?
Click to expand...
Click to collapse
HTML:
https://4pda.ru/forum/index.php?s=&showtopic=870393&view=findpost&p=76931735

Anyone can port EUI/MIUI/Flyme or Nougat (lineage/CrDroid/RR) to Z2?
Both has same chipset Helio X20 (4/32)
LeEco Le2 X62x ROM [4pda.ru]

no changes
taras-fedora-syn said:
Port Miui Hellas TEAM, my logo and splashlogo
HTML:
https://www.needrom.com/download/twrp-for-sharp-z2/
---------- Post added at 04:00 PM ---------- Previous post was at 03:57 PM ----------
HTML:
https://4pda.ru/forum/index.php?s=&showtopic=870393&view=findpost&p=76931735
Click to expand...
Click to collapse
-
-
So i follow every step but after flashing preloader there is only black screen again.
What should i do next?

zeronavigator said:
-
-
So i follow every step but after flashing preloader there is only black screen again.
What should i do next?
Click to expand...
Click to collapse
I don't understand why to flashing preloader
TWRP --- Install ROM or SuperSu.zip
firmware under flashtool
Click on the SP Flash Tool "Download" and connect the switched off phone with the Vol "-" key pressed as on the screen, the tick on the Preloader is not worth it! Release the key a few seconds after filling the 100% red bar. Wait for the end of the firmware and the appearance of a green tick. Disconnect the phone from the PC and try to turn it on

taras-fedora-syn said:
firmware under flashtool
Click on the SP Flash Tool "Download" and connect the switched off phone with the Vol "-" key pressed as on the screen, the tick on the Preloader is not worth it! Release the key a few seconds after filling the 100% red bar. Wait for the end of the firmware and the appearance of a green tick. Disconnect the phone from the PC and try to turn it on
Click to expand...
Click to collapse
So i did with a firmware i found on 4pda forum for sharp z2 using this guide http://4pda.ru/forum/index.php?showtopic=870393&st=100#entry76931735
I managed to flash using vol- with VCOM drivers.
Tried to boot the phone and nothing changed.
Black screen, short vibration on power button but no progress, no fastboot no recovery no nothing.
i also tried to find this firmware TSP-1360-0-00WW-A03-update.zip in case i was flashing wrong files but there is nowhere available for download except baidu server on witch it need an acount with a phone verification.
Still dont understand what i am doing wrong..
Any ideas?

zeronavigator said:
Any ideas?
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic=870393&view=findpost&p=77195440
Spoiler - P.S.
If it doesn't work then yo need to flash the full backup,
I don't want to give my because my IMEI are there

So i managed to revive the phone.. but as expected no IMEI no Baseband blah blah blah..
..and of curse i have no backup of it.
Is there a tutorial \ guide on how to fix this problem on my sharp z2 ?
Thank you in advace

help me
can get the original rom from sharp-z2 and send the link to me download
I cannot go to baidu to download it because I am Brazilian and my number does not accept