Database Users

[Q] Huawei E5372s-32 stuck on boot after wrong firmware

Hello
i need help to back my E5372s-32 which stuck on boot and give me logo of Huawei
after connect it to my PC cannot feel with modem
i tried to enter ' Force download " mode to firmware it using (power+Menu) buttons during turn on but i could see it for less 1 second
i could get manual for the device may help
http://www.mediafire.com/download/f...aintenance+Manual+Basic+Version+V1.2.rar.html
thanks

That Simply means there is an error on the phone software, Update it and it'l be 5n

Unfortunately XDA is not the right place to talk about MiFi Routers. So although there are millions of members here, very few will find your post, and very few of those who do will be able to help you. So you will probably have much better success in places like the GSM-Forums website.

thanks for advice , I will post it here too , you mean gsmhosting?
I get some update after many trying
I press power+Menu , as soon as (Force download) appear I quickly plugin the USB cable which connected to PC
suddenly I got screen of mifi ( DONOT POWER OFF) its force update screen, then my pc starts to feel with the modem and starts to installing driver
the problem that this PC have new windows so it does not recognize of all drivers,
after some time I installed the driver from
https://docs.google.com/file/d/0B9zJjgJXRt_eTlU2N2pJSVlRMWs/edit?pli=1
then I tried to Enter Force download again I could not
I tried more but as soon as I enter it , the mifi go out again to Huwaie logo
I do not know how I enter fore download mode easy and make PC feel again with Mifi

Please alaa i have same a problem with huawei E5372 , but when i update nothing comining only huawei logo freeze
الله يا خليك يا عم علاء عندي نفس المكلة و كل لما اعملها مش بترضى و الججهاز بيعلق ممكن حل

alaa2003 said:
Hello
i need help to back my E5372s-32 which stuck on boot and give me logo of Huawei
after connect it to my PC cannot feel with modem
i tried to enter ' Force download " mode to firmware it using (power+Menu) buttons during turn on but i could see it for less 1 second
i could get manual for the device may help
http://www.mediafire.com/download/f...aintenance+Manual+Basic+Version+V1.2.rar.html
thanks
Click to expand...
Click to collapse
I know I may be a little too late but I found the solution to this. I was stuck on the FTM screen but THIS firmware solved it. It is really easy. Try it out and tell me how it goes. All the best.

Dear i have the same problem. with my sts huawei router. Could you please tell us the whole procedure how you did it? like from the start how to install driver how to flash with full links how to move my device into download mode to detect it with computer and make installation which tools needed. Thnx in Advance.

have you solved the problem ??

Ok, so I'll try to make this short, this is how I fixed the logo bootloop.
I basically flashed a wrong firmware and the device was rendered unusable(stuck at logo).
First of all u need to use "Huawei Vodafone R215 – E5372 Flasher by fr3nsis" u can google it.
U need to find the right .hmf firmware to flash with fr3nsis.
The only one that I found and worked was "R215MobileWifiFirmware_v3.1"
it contains 13 files .bin and the flashable R215MobileWifiFirmware_v3.1.hmf.
You also need R215MobileWifiFirmware_v3.1.exe
After getting the files u need to put the device in download mode,
take the battery out and put it back, press and hold menu and power until some text appears(1 second),
right when the text appears press menu and it should get you into download mode.
Now u can use the the flasher tool to flash the firmware. after a few seconds, it should say "fail"
restart device and flash with R215MobileWifiFirmware_v3.1.exe. it should now work

searching R215MobileWifiFirmware_v3.1.hmf
Hgall8 said:
Ok, so I'll try to make this short, this is how I fixed the logo bootloop.
I basically flashed a wrong firmware and the device was rendered unusable(stuck at logo).
First of all u need to use "Huawei Vodafone R215 – E5372 Flasher by fr3nsis" u can google it.
U need to find the right .hmf firmware to flash with fr3nsis.
The only one that I found and worked was "R215MobileWifiFirmware_v3.1"
it contains 13 files .bin and the flashable .
You also need R215MobileWifiFirmware_v3.1.exe
After getting the files u need to put the device in download mode,
take the battery out and put it back, press and hold menu and power until some text appears(1 second),
right when the text appears press menu and it should get you into download mode.
Now u can use the the flasher tool to flash the firmware. after a few seconds, it should say "fail"
restart device and flash with R215MobileWifiFirmware_v3.1.exe. it should now work
Click to expand...
Click to collapse
*Hi, friend Hgall8, do you still have the R215MobileWifiFirmware_v3.1.hmf? I've been searching but I do not get it anywhere on the internet*

jose_amaral97 said:
*Hi, friend Hgall8, do you still have the R215MobileWifiFirmware_v3.1.hmf? I've been searching but I do not get it anywhere on the internet*
Click to expand...
Click to collapse
Not sure if I'm allowed to post links here, I'll send you the link in pm

E5372T -,Stucked on boot logo firmware version 21.290.03.00.838
Hi do you have any solution for version 21.290.03.00.838(current) ? I'M stucked on boot logo. How to downgrade to version 21.290.03.00.00? I tried using Fr3sis flasher 1.0v and it didn't work. I also tried Fr3nsis 1.6v but it didn't work bcuz it doesn't detect the com port meanwhile fr3nsis 1.0v can read the com port but different number of Com port. Let say huawei modem (com 9) but when it comes to detect the port using Fr3nsis 1.0v it show com4 instead. Desperately need help

Sir I have huawei e3272s-927 airtel modem when I upgrade software with wizard after the device not found and modem symbol is in device manager appear and disappear what the solution pls help me

dr_edmund said:
Hi do you have any solution for version 21.290.03.00.838(current) ? I'M stucked on boot logo. How to downgrade to version 21.290.03.00.00? I tried using Fr3sis flasher 1.0v and it didn't work. I also tried Fr3nsis 1.6v but it didn't work bcuz it doesn't detect the com port meanwhile fr3nsis 1.0v can read the com port but different number of Com port. Let say huawei modem (com 9) but when it comes to detect the port using Fr3nsis 1.0v it show com4 instead. Desperately need help
Click to expand...
Click to collapse
use boot short pin method its helped
---------- Post added at 06:22 PM ---------- Previous post was at 06:16 PM ----------
alaa2003 said:
thanks for advice , I will post it here too , you mean gsmhosting?
I get some update after many trying
I press power+Menu , as soon as (Force download) appear I quickly plugin the USB cable which connected to PC
suddenly I got screen of mifi ( DONOT POWER OFF) its force update screen, then my pc starts to feel with the modem and starts to installing driver
the problem that this PC have new windows so it does not recognize of all drivers,
after some time I installed the driver from
https://docs.google.com/file/d/0B9zJjgJXRt_eTlU2N2pJSVlRMWs/edit?pli=1
then I tried to Enter Force download again I could not
I tried more but as soon as I enter it , the mifi go out again to Huwaie logo
I do not know how I enter fore download mode easy and make PC feel again with Mifi
Click to expand...
Click to collapse
first press menu then power dont release until show arrow image
connect mifi to pc
install huawei driver
check your port device use huawei flasher or you can install firmware with exe extension

[Q] [Help] Bricked UMI ZERO

Hey people, can anyone get me a MTK droid backup of UMI ZERO? I need it to see if i can recover my bricked UMI
pleaaasseee.....
Also, it seems my scatter file backup from MTK does not have all t info?? and SP flashtools does not accept the ones included in the Ota-updates... so if anyone please can also get me a good scatter file ... i would be much apreciated.

Hello, you can get the rom including scatter file from Needrom! Just flash trough sp tool and you will be fine.
Sent from my UMI ZERO using XDA Free mobile app

I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway

reisamm said:
I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway [/QUOTE
please tell me how did you make it work...as i am in the same boat..the pc wont recognise it
Click to expand...
Click to collapse

reisamm said:
I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway
Click to expand...
Click to collapse
please tell mew how you did it . i am so upset that my phone is absoluteley dead

Hi there raducux,
Well, this was about another situation, but mixing with ROM's cooking I was able to brick it again it was mrsim who help me (mod at china-devices.com, credit where is due). But I will tell you how I did it.
You need to have the adb android drivers installed and flashtool v5.1 or up (the one I used, but some people use the 3.1 version).
Download this ROM from needrom (scatter file compatible with FT).
Link: http://www.needrom.com/wp-content/uploads/2014/11/Y800_UMI_20141104_1907xx-s7yler.zip or
http://www.needrom.com/download/umi-zero/
Extract, and in flashtools select the scatter file inside the directory you extracted. Press flash, and (after pressing flash) connect the phone to the USB port holding the volume down key (so the phone connects in META mode), and the process should begin.
If all works well after flashing the phone should boot the new ROM, its version 3.01 so you have to upgrade it.
If that does not work, tell me a few things... I suppose the phone does not start or appear the 'Zero' logo, but tell me if when you connect it to the computer you ear the normal plugin USB sound?
FlashTools (all versions)
http://helpadude.com/sp-flash-tools/
Universal ADB Driver
http://www.needrom.com/download/universal-adb-driver/
Tell me if it worked, or if you need more help tell me what happened and how the phone responds. lot of people here also that can help. My 1st thing I check when buying a new phone (for many years now), is if it's 'XDA' Supported...
cheers

reisamm said:
Hi there raducux,
Well, this was about another situation, but mixing with ROM's cooking I was able to brick it again it was mrsim who help me (mod at china-devices.com, credit where is due). But I will tell you how I did it.
You need to have the adb android drivers installed and flashtool v5.1 or up (the one I used, but some people use the 3.1 version).
Download this ROM from needrom (scatter file compatible with FT).
Link: http://www.needrom.com/wp-content/uploads/2014/11/Y800_UMI_20141104_1907xx-s7yler.zip or
http://www.needrom.com/download/umi-zero/
Extract, and in flashtools select the scatter file inside the directory you extracted. Press flash, and (after pressing flash) connect the phone to the USB port holding the volume down key (so the phone connects in META mode), and the process should begin.
If all works well after flashing the phone should boot the new ROM, its version 3.01 so you have to upgrade it.
If that does not work, tell me a few things... I suppose the phone does not start or appear the 'Zero' logo, but tell me if when you connect it to the computer you ear the normal plugin USB sound?
FlashTools (all versions)
http://helpadude.com/sp-flash-tools/
Universal ADB Driver
http://www.needrom.com/download/universal-adb-driver/
Tell me if it worked, or if you need more help tell me what happened and how the phone responds. lot of people here also that can help. My 1st thing I check when buying a new phone (for many years now), is if it's 'XDA' Supported...
cheers
Click to expand...
Click to collapse
indeed. i too have been messing on xda a lot for a long time.
i managed to get into twrp again.
so that must be good...after. the battery died..;.butr mtk preloader doesnt instal;l
please tell me..first i need to hit download only...and after that.... ? the steps are a bit missleding .
---------- Post added at 03:10 PM ---------- Previous post was at 02:58 PM ----------
i managed to bioot the device in emui !!!! this morning..i could acces twrp. pressing volume down when connected to pc ..and the chinesse recovery pressing volume up ... rootjoy cant flash the device as it sais it is unsupported, now...i reeallly need to know the steps for going back to stock
---------- Post added at 03:29 PM ---------- Previous post was at 03:10 PM ----------
i am running antarct s emui . with twrp recovery... i need dto know the sp flash tools steps correctly to flash back to stock
preloader doesnt install correctly in pc because volume down...takes me to twrp...and volume up...to the chinesse recovery of huawei,
so preloader starts installing, but when in recovery..it gets dissconected

Could you tell how did you put it in meta mode? I have a Zero with no preloader and in windows it shows up as unknown device. No matter how I try to boot it up (vol- vol+). Other than showing in windows, it's dead. Is there a way to revive ti?

Heavy Hard Brick Zuk Z1 international Version

HI everybody, I have a very big problem with my zuk. Trying to solve a problem about network, I thought to come back to stock via fastboot. But given that I was tired doing so many tries, I wrongly flash a zip file via fastboot instead of use adb, so the phone didn't turn on anymore. I must say first of all that it isn't my first phone, so I'm not a newbie. The real problem is: When I plug Zuk into my Pc( Windows 10) it isn't recognized as qhsusb_bulk ( It could be easy to solve the problem) but as "unknown usb device (Device Descriptor Request Failed)". I try to plug the phone pressing every button like Vol+ and power, Vol- and power but nothing to do. I' m already in Test Mode on Windows 10 and I deleted every Zuk or Qualcomm Drivers. Anyone can help me?
Thank you
Ps: Even If the screen is always off, Is there a way to boot into fastboot mode with hardware keys?

Xluk3 said:
HI everybody, I have a very big problem with my zuk. Trying to solve a problem about network, I thought to come back to stock via fastboot. But given that I was tired doing so many tries, I wrongly flash a zip file via fastboot instead of use adb, so the phone didn't turn on anymore. I must say first of all that it isn't my first phone, so I'm not a newbie. The real problem is: When I plug Zuk into my Pc( Windows 10) it isn't recognized as qhsusb_bulk ( It could be easy to solve the problem) but as "unknown usb device (Device Descriptor Request Failed)". I try to plug the phone pressing every button like Vol+ and power, Vol- and power but nothing to do. I' m already in Test Mode on Windows 10 and I deleted every Zuk or Qualcomm Drivers. Anyone can help me?
Thank you
Ps: Even If the screen is always off, Is there a way to boot into fastboot mode with hardware keys?
Click to expand...
Click to collapse
Not that I know,do you have the stock recovery or twrp?

I have the exact problem with my new zuk z1. Any idea is appreciated. The nice phone seems lost now.

Seems like you'll have to restore your zuk to the zui version again. Do you have qrst and zui version downloaded??

The service port never pops up
I do have the qpst and the zui rom. The main obstacle is that qualcomm service port never pop up.

Setup.zuk said:
I do have the qpst and the zui rom. The main obstacle is that qualcomm service port never pop up.
Click to expand...
Click to collapse
try this:
start QFIL from the QPST folder
Click browse on the programmer path row and select prog_emmc_firehose_8974.mbn from the directory where you unzipped the QPST ZUI ROM
and then click browse on the search path row and select the xml file + the other patch file which comes after it.
When thats done, make sure phone is off and then hold vol+ while you are inserting usb cable into phone and QFIL should then detect phone,
you may need to select port in the QFIL program and be quick with it, took me a few tries before I got it right so just take out the cable
and turn off and try again if you fail to make them connect.
Not only you need to select comport, you also need to press the download button aswell as soon as possible or else phone will continue booting as normal.
If everything went well then you should have ZUI loaded onto your phone and you are met with Chinese language as default.
On the first screen you are met with, just press the button in the bottom (on screen), then press cogwheel (which is the settings),
scroll down to yet another cogwheel in here which should be below a lock icon, then press second option in here and then the top option
to change language to english incase you cant make out the chinese and you should be good to go

Nikosstamatiou said:
try this:
start QFIL from the QPST folder
Click browse on the programmer path row and select prog_emmc_firehose_8974.mbn from the directory where you unzipped the QPST ZUI ROM
and then click browse on the search path row and select the xml file + the other patch file which comes after it.
When thats done, make sure phone is off and then hold vol+ while you are inserting usb cable into phone and QFIL should then detect phone,
you may need to select port in the QFIL program and be quick with it, took me a few tries before I got it right so just take out the cable
and turn off and try again if you fail to make them connect.
Not only you need to select comport, you also need to press the download button aswell as soon as possible or else phone will continue booting as normal.
If everything went well then you should have ZUI loaded onto your phone and you are met with Chinese language as default.
On the first screen you are met with, just press the button in the bottom (on screen), then press cogwheel (which is the settings),
scroll down to yet another cogwheel in here which should be below a lock icon, then press second option in here and then the top option
to change language to english incase you cant make out the chinese and you should be good to go
Click to expand...
Click to collapse
So i am having the same problem. The phone is not being recognized by the software. That is the whole problem. Any ideas?

Tarsa said:
So i am having the same problem. The phone is not being recognized by the software. That is the whole problem. Any ideas?
Click to expand...
Click to collapse
Actually, I think the problem is, that it will not reach the fastboot mode, due to the non-stop process of system-updating and boot-loop. I can observe for a very short time the message 'systemupdate will be installed' and then the screen becomes black again. This procedure is repeating every time. I will wait till the battery is empty and see, whether the boot with Volume-+--USB-cable will work.

mikarbach said:
Actually, I think the problem is, that it will not reach the fastboot mode, due to the non-stop process of system-updating and boot-loop. I can observe for a very short time the message 'systemupdate will be installed' and then the screen becomes black again. This procedure is repeating every time. I will wait till the battery is empty and see, whether the boot with Volume-+--USB-cable will work.
Click to expand...
Click to collapse
PLease do update me if you manage to fix it. This is getting very frustrating

I have the same problem, caused after a cyanogenmod update... Did someone fix this??

Another hard bricked Z1 here.
QFIL recognizes the phone (as Qualcomm 9008 etc.). So I am able to click Download, but after a few seconds, it fails with these errors:
Code:
[...]
Sending NOP
NOP: Fail Code: 9
Unable to send FireHose NOP, Device is not in Firehose mode !
Download Fail:System.Exception: Failed to send Firehose NOP to the phone.
in QC.QMSLPhone.Phone.QPHONEMS_FireHoseNOP()
in QC.SwDownloadDLL.SwDownload.FireHoseDownloadImage(Boolean bResetPhone, List`1 rawprogramFilesList, List`1 patchFilesList, Single& fImageSizeInMB, Single& fThroughput)
Download Fail:FireHose Fail FireHose Fail
Finish Download
I've tried many many times, and many different things. Still no luck .
I'd appreciate if anyone could input some new ideas of other stuff to try. Thanks

CarlosAir said:
Another hard bricked Z1 here.
QFIL recognizes the phone (as Qualcomm 9008 etc.). So I am able to click Download, but after a few seconds, it fails with these errors:
Code:
[...]
Sending NOP
NOP: Fail Code: 9
Unable to send FireHose NOP, Device is not in Firehose mode !
Download Fail:System.Exception: Failed to send Firehose NOP to the phone.
in QC.QMSLPhone.Phone.QPHONEMS_FireHoseNOP()
in QC.SwDownloadDLL.SwDownload.FireHoseDownloadImage(Boolean bResetPhone, List`1 rawprogramFilesList, List`1 patchFilesList, Single& fImageSizeInMB, Single& fThroughput)
Download Fail:FireHose Fail FireHose Fail
Finish Download
If tried many many times, and many different things. Still no luck .
I'd appreciate if anyone could input some new ideas of other stuff to try. Thanks
Click to expand...
Click to collapse
No idea, my device is actually dead.

mikarbach said:
No idea, my device is actually dead.
Click to expand...
Click to collapse
Aw .
I don't want to lose hope, but everything I've tried so far has failed. :| , and I don't know what else to try.

CarlosAir said:
Aw .
I don't want to lose hope, but everything I've tried so far has failed. :| , and I don't know what else to try.
Click to expand...
Click to collapse
Try another cable, another USB slot, another pc/laptop

mikarbach said:
No idea, my device is actually dead.
Click to expand...
Click to collapse
try to flash cos 12.1 with qfil.
its there somwhere on 4pda forum(search there).
Sent from my Z1 using XDA-Developers mobile app

So guys if I try to flash unofficial CM 13 do I risk bricking the device for good???

t.h.i said:
try to flash cos 12.1 with qfil.
its there somwhere on 4pda forum(search there).
Sent from my Z1 using XDA-Developers mobile app
Click to expand...
Click to collapse
Of course I have tried this, with two different computers and two different USB cable, both actually working on my N5X. But the point is, that I do not reach the point, that qfil recognizes the phone. Also not with the trick of starting with power-button/USB-cable. It constantly tries to reboot and with adb I get a message 'not authorized' .
---------- Post added at 11:17 AM ---------- Previous post was at 11:05 AM ----------
carlese said:
So guys if I try to flash unofficial CM 13 do I risk bricking the device for good???
Click to expand...
Click to collapse
I think in my case the after the first successful CM13-snapshot-installation was two fold:
1. I have not enabled USB-debugging and do not have had connected it to my computer after the first CM13-installation.
2. Due to some unknown reason the automatically update via CM itself has boot looped.
The second point is not a real problem, I think. I have had a bootloop many times before with other phones, as well as with the Zuk, but I was always able to resolve the problem with adb. I think the first point was the problem, so adb wasn't possible, due to authorization problems. The reason why qfil does not work, I really do not know exactly, but qfil in fact was not able to recognize the phone.

I have the same problem. Totally bricked.
No charge, no PC recognise, nothing.
I tried with QFIL but the PC does not recognise the port.
I don't know what else I can do. Any ideas?
Thanks!

alexisdance said:
I have the same problem. Totally bricked.
No charge, no PC recognise, nothing.
I tried with QFIL but the PC does not recognise the port.
I don't know what else I can do. Any ideas?
Thanks!
Click to expand...
Click to collapse
Sry, no I do not have

Hello!
I have dealt with this sort of problem before and have successfully un-bricked my friend's device. I will be posting a guide to solve this problem soon.
Hang-on!

[JALEBI] [UNBRICK] [STOCK] Flashing Stock Firmware on Yu Yunique YU4711

Wiped 'System' while flashing CM and now stuck on 'Cyanogen Fastboot Mode' screen?
What's even worse, is that, you didn't enable USB Debugging!
This guide is for you! Read On!​
Yes, you guessed it right! You can get your soft-bricked Yunique up and alive, and I did this too, so I guess this is the only method that works.
Some things before we start:
This guide is tested to work on YUNIQUE ONLY, and not any other devices. Try any other devices at your own risk.
This guide shall work only if your phone starts up and shows that ugly Fastboot screen. If the device doesn't show any signs of starting, get it to the service center.
Don't lodge an FIR on me if this doesn't work for you. Maybe you're not following the steps correctly, or you just aren't lucky.
Requisites:
Stock Firmware Zip: HERE
Qualcomm Drivers: HERE
Windows PC
Original/Good Quality USB Cable (else writing speed will be very slow and could even be interrupted).
The phone (Fully Charged. Since you can't see the battery level, I suggest you to plug it in for 2-3 hours to ensure enough battery for the process)
Patience
Now comes the real part. I've divided the procedure into two parts to make it easy for you. First, go through the entire post, then proceed.
Part 1- BACKSTAGE WORKS:
The file you will download has no extension (null extension) so you need to add the zip extension (.zip) at the end of the filename by renaming it. Only then it will be extractable. So go ahead and extract it.
Run the 'setup' from inside the 'Driver' folder inside the folder that you just extracted. Let it instal the drivers, then Restart your computer. Restarting is necessary.
Extract the 'QualcommDrv.zip' (Qualcomm Drivers Zip). Depending on your architecture, instal the driver by running either 'dpinst32.exe' or 'dpinst64.exe' which can be found inside 'Allx86' and 'Allx64' folders respectively.
Get your phone into that Fastboot screen by holding down Volume Up + Power button for 7-10 seconds.
Part 2- DAMN YOU, BRICK:
Run 'ets.startrun.exe' fron inside the 'HQXA CustomerDL EMMC V1.15 150706' folder.
While in fastboot mode, connect the phone to your computer.
Now in the ETS Flasher window, click on the USB Button (Butterfly Icon). This should open up a list of all interface ports and devices connected to them. Look under the 'DevDesc' field for your phone. It should be mentioned as 'Android Bootloader Interface' or 'Android Composite Hardware' or 'QCOM Interface'. Take a note of the port number in the format 'USB_XYZ' (like USB_202) because you shall need the port number. To find your device easily, remove all other USB devices till you're done unbricking.
Close the USB Device Manager window and get back to the ETS Flasher window. Hit the 'Set' button (beside the Butterfly Icon). Set 'Download Mode' to 'EmergencyDownload'. Now click on 'Change Path' and select the 'Firmware' folder found inside the extracted ROM Zip.
Under 'Port Settings', Select the port number you took a note of in the previous step, and make sure every other 'Thrd' box is set to NULL. Click 'Ok' to get back to the main window. Let it load the directory completely.
After the directory is loaded, push your phone into 'Download Mode' by pressing and holding all three physical buttons- VOLUME UP + POWER + VOLUME DOWN together for some time. The phone shall reboot into 'Cyanogen Download Mode'.
Once the 'Download Mode' screen appears, Press VOLUME UP to confirm. The screen shall now go blank and your computer should detect the device.
If your phone is detected by ETS Flasher, your phone should appear across the selected port. The 'Item' name should read 'sahara download mode' and 'P/F' should change to 'READY' from 'NO PHONE'. If you can't see these, it means your drivers are not properly installed. See the troubleshooting at the end of this post.
Now hit 'Start All' button and wait till the progress bar goes from zero all the way upto 100%. In my case, it took 7 minutes and 15 seconds to flash the phone, but it may vary.
After it has flashed your phone completely, your phone should restart automatically. Done! Mission Accomplished!
Troubleshooting:
Phone doesn't reboot into Download Mode: Try a normal force rebbot first, by holding the power button for some seconds. After you feel a slight vibration, try to get into Download Mode and it should work.
Phone is not detected in ETS Flash window: Follow these steps.
Flashing stops in between, doesn't complete: The USB Port of your computer might have loose plates. Try changing to a different port and retry.
This is my first post here so I tried to be as descriptive as I can. If it helped, don't forget to give :good: a thumbs up!
Cheers!

Stock rom
Currently I am using this cm13 rom. There are some bugs
1. I am unable to transfer file to pc .
2. Sometimes there are glitches on screen or you can say it, screen flutuates.
I want to switch to stock ROM but the problem is that acidently I have deleted my backup folder. How can I switch to stock rom. Plz help me. Had installed rom by TWRP-2.8.7.0_jalebi.img

Dadofbatman said:
Currently I am using this cm13 rom. There are some bugs
1. I am unable to transfer file to pc .
2. Sometimes there are glitches on screen or you can say it, screen flutuates.
I want to switch to stock ROM but the problem is that acidently I have deleted my backup folder. How can I switch to stock rom. Plz help me. Had installed rom by TWRP-2.8.7.0_jalebi.img
Click to expand...
Click to collapse
Hi, the mentioned method should work for you! Give it a try and report back

yu yunique
HYPERJIT said:
Hi, the mentioned method should work for you! Give it a try and report back
Click to expand...
Click to collapse
I tried 4 marshmallow rom but in every rom after booting screen fluctuates or vibrates sometimes. this problem is not in stock rom. Is this due to DPI problem ? Could you plz suggest me possible solution for this!

@HYPERJIT
my download stops after 1% and status says failed.
what needs to be done ?
Help in needed and very much appreciated
I was using AOSParadox ROM, so my file system was formatted accordingly.
Is my download failing because of file system issue ?
If yes, what should be my file system ? ext4 or f2fs
---------- Post added at 02:45 PM ---------- Previous post was at 02:22 PM ----------
ashish811 said:
@HYPERJIT
my download stops after 1% and status says failed.
what needs to be done ?
Help in needed and very much appreciated
I was using AOSParadox ROM, so my file system was formatted accordingly.
Is my download failing because of file system issue ?
If yes, what should be my file system ? ext4 or f2fs
Click to expand...
Click to collapse
nevermind, I restarted the whole process and finished successfully

My yu yunique battery is discharged totally and also there's no operating system installed. Is there any method to charge battery externally. It has non removable battery

Thank you so much bro your tutorial was easy to follow and worked like a charm :good:

IOS ROM for yu yunique
Can yu built and port iOS ROM for yunique if you can built thankyou
---------- Post added at 12:50 PM ---------- Previous post was at 12:49 PM ----------
Please built any iOS ROM for yu yunique

Will this work for yunique plus?
Sent from my YUNIQUE using XDA Labs

rahul pawar said:
Can yu built and port iOS ROM for yunique if you can built thankyou
---------- Post added at 12:50 PM ---------- Previous post was at 12:49 PM ----------
Please built any iOS ROM for yu yunique
Click to expand...
Click to collapse
You don't know anything about roms do you? IOS is built on a completely different coding language and isn't open source.

Andy2290 said:
You don't know anything about roms do you? IOS is built on a completely different coding language and isn't open source.
Click to expand...
Click to collapse
Oopps sory but you can build flyme OS for yu yunique.
Because other devices like YUPHORIA has very good room but yu YU YUNIQUE has only few like MIUI 7/8 ,,XOSP,,,CM14.1 ....
Wwww ......

rahul pawar said:
Oopps sory but you can build flyme OS for yu yunique.
Because other devices like YUPHORIA has very good room but yu YU YUNIQUE has only few like MIUI 7/8 ,,XOSP,,,CM14.1 ....
Wwww ......
Click to expand...
Click to collapse
that's what I m trying to do I m porting latest stable miui 8 for Yunique I m able to boot it there r bugs like WiFi,Bluetooth,sound and camera is not working

what is difference between v1 and v2?

Dush4711 said:
what is difference between v1 and v2?
Click to expand...
Click to collapse
As i knw in v1 u ll get update for volte and in v2 u ll not get votle update

iamanurag said:
As i knw in v1 u ll get update for volte and in v2 u ll not get votle update
Click to expand...
Click to collapse
Firmware V1 link is dead. I can't find the V1 link in Google too. Can someone please make it alive

iamanurag said:
As i knw in v1 u ll get update for volte and in v2 u ll not get votle update
Click to expand...
Click to collapse
Do you have V1 download Link?

blacm said:
Do you have V1 download Link?
Click to expand...
Click to collapse
I dont hv but u can check how to unbrick your yu yunique thread u ll get there

iamanurag said:
I dont hv but u can check how to unbrick your yu yunique thread u ll get there
Click to expand...
Click to collapse
I have searched there and Google too. Can't find it :crying:

I got the V1 link, got installed the firmware. Everything is fine, Except the Bootloader.
https://drive.google.com/file/d/0B5tAmL4V5awdWnQwSHI1WXdmSFk/view
I have lost the 'cyanogen fastboot mode' and My Fastboot is showing as 'Yunique Logo'.
Without Cyanogen fastboot, I can't access the 'Download Mode' to patch alternate firmwares.
Any idea about this issue?

Is there a flashable version of stock rom?
Sent from my Redmi 3S using Tapatalk

Sharp Z2 brick, no fastboot, black screen, not booting

Hi @xda Team,
couldn't find any threads releted to Sharp Z2, which would match to my issue, so that's why I'm trying it in this forum.
I have Sharp Z2 phone (https://www.gsmarena.com/sharp_z2-8410.php).
I tried to root it and to install/flash TWRP recovery on it. Because of realy less information for this phone it was difficult to find proper files.
So I tried with an official version of TWRP.... didn't worked.... after long time, I found on an chineese forum some instructions for flashing the TWRP through ADB/Fastboot.
Bacause I have successfully used this technology already several times on other phones, I was happy to have finaly found something AND forgot to check the skripts
The result is, that after unsuccessfully flashing the bootloader got blocked trough this script (OEM blocked). Now my phone is not booting. I have no access to FASTBOOT and to RECOVERY mode.
I have found an unbrick instruction for LeEco s3 (based on x620) using the SP Flashtool (I have used it successfully for my other phone LeEco S3).
Following this intruction on my Sharp I'm getting following message:
"BROM ERROR: STATUS_SEC_PL_VFV_FAIL......."
It looks to my, that I have not all permissions to flash the phone.
SO still NOT BOOTING, NO ACCESS to FASTBOOT AND TO RECOVERY MODE.
Also on XDA Forum I found this guide for an ASUS Phone (https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785)
UPDATE:
SP Flashtool is not able to load the preloader file. Always stops with the same error: BROM ERROR: STATUS_SEC_PL_VFV_FAIL......."
In some forums I've read that flashing with wrong preloader can cause my issue and that in this case there is nothing there to save / recover the phone.
I still hope, that because of the Android OS there is still a chae to unbrick it.
Please HELP!!!
Thanks in advance.

mine is in a similar state but i still have access to the fastboot; i can reboot to bootloader or recovery but only to acccess fastboot. there is no recovery tool left on it and attempt to flash twrp - various versions of those have all been failed attempts. handset is still in the brick state with access to fastboot but no use.
please help to get this working again, given the fastboot is working, can i use any other recovery tool except for twrp to maybe get to having OS flashed?

Hi. On the forum 4pda have firmware under flashtool

can anybody provide correct preloader file for this phone (Sharp Z2 FS8002).?

taulu7 said:
Hi. On the forum 4pda have firmware under flashtool
Click to expand...
Click to collapse
Port Miui Hellas TEAM, my logo and splashlogo
HTML:
https://www.needrom.com/download/twrp-for-sharp-z2/
---------- Post added at 04:00 PM ---------- Previous post was at 03:57 PM ----------
VanDragon said:
can anybody provide correct preloader file for this phone (Sharp Z2 FS8002).?
Click to expand...
Click to collapse
HTML:
https://4pda.ru/forum/index.php?s=&showtopic=870393&view=findpost&p=76931735

Anyone can port EUI/MIUI/Flyme or Nougat (lineage/CrDroid/RR) to Z2?
Both has same chipset Helio X20 (4/32)
LeEco Le2 X62x ROM [4pda.ru]

no changes
taras-fedora-syn said:
Port Miui Hellas TEAM, my logo and splashlogo
HTML:
https://www.needrom.com/download/twrp-for-sharp-z2/
---------- Post added at 04:00 PM ---------- Previous post was at 03:57 PM ----------
HTML:
https://4pda.ru/forum/index.php?s=&showtopic=870393&view=findpost&p=76931735
Click to expand...
Click to collapse
-
-
So i follow every step but after flashing preloader there is only black screen again.
What should i do next?

zeronavigator said:
-
-
So i follow every step but after flashing preloader there is only black screen again.
What should i do next?
Click to expand...
Click to collapse
I don't understand why to flashing preloader
TWRP --- Install ROM or SuperSu.zip
firmware under flashtool
Click on the SP Flash Tool "Download" and connect the switched off phone with the Vol "-" key pressed as on the screen, the tick on the Preloader is not worth it! Release the key a few seconds after filling the 100% red bar. Wait for the end of the firmware and the appearance of a green tick. Disconnect the phone from the PC and try to turn it on

taras-fedora-syn said:
firmware under flashtool
Click on the SP Flash Tool "Download" and connect the switched off phone with the Vol "-" key pressed as on the screen, the tick on the Preloader is not worth it! Release the key a few seconds after filling the 100% red bar. Wait for the end of the firmware and the appearance of a green tick. Disconnect the phone from the PC and try to turn it on
Click to expand...
Click to collapse
So i did with a firmware i found on 4pda forum for sharp z2 using this guide http://4pda.ru/forum/index.php?showtopic=870393&st=100#entry76931735
I managed to flash using vol- with VCOM drivers.
Tried to boot the phone and nothing changed.
Black screen, short vibration on power button but no progress, no fastboot no recovery no nothing.
i also tried to find this firmware TSP-1360-0-00WW-A03-update.zip in case i was flashing wrong files but there is nowhere available for download except baidu server on witch it need an acount with a phone verification.
Still dont understand what i am doing wrong..
Any ideas?

zeronavigator said:
Any ideas?
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic=870393&view=findpost&p=77195440
Spoiler - P.S.
If it doesn't work then yo need to flash the full backup,
I don't want to give my because my IMEI are there

So i managed to revive the phone.. but as expected no IMEI no Baseband blah blah blah..
..and of curse i have no backup of it.
Is there a tutorial \ guide on how to fix this problem on my sharp z2 ?
Thank you in advace

help me
can get the original rom from sharp-z2 and send the link to me download
I cannot go to baidu to download it because I am Brazilian and my number does not accept