How do I power on my phone . My power button is broken. I have tried to plug the charger then remove battery and put it back and it still not working. I also had tried to push volume down button and plug the charger, it is on but only showing welcome screen and note that i can reset the phone by pressing the power button (which is broken). Anybody can help?
Take a metal piece like key or other ........not a pointed one and touch it to metal which is behind the broken button for 5seconds
---------- Post added at 05:00 AM ---------- Previous post was at 05:00 AM ----------
abieara said:
How do I power on my phone . My power button is broken. I have tried to plug the charger then remove battery and put it back and it still not working. I also had tried to push volume down button and plug the charger, it is on but only showing welcome screen and note that i can reset the phone by pressing the power button (which is broken). Anybody can help?
Click to expand...
Click to collapse
Take a metal piece like key or other ........not a pointed one and touch it to metal which is behind the broken button for 5seconds
Related
usualy i am good with physical problems like this but i am now forced to make my own thread because i have no idea why my device wont power on.
after opening my blackstone/touch hd to tighten my screws, my power button has stopped working.
(fyi, a screw came loose a while ago near my sim card after dropping my devive so i thought id tighten all my screws while i had my screwdrivers out fixing my cousins phone)
however, without having the plastic power button attatched to the device, i am able to press the actual button with my stylus and make contact with the main button on the motherboard, the device will now power on.
(eliminating that the actual button to power on is broken)
but, when i attatch the plastic button and press it to power on the device, it doesnt make contact with the actual button inside on the motherboard.
(not making contact with the button on the motherboard)
i have examined the plastic button, all is intact and i am assembling it to the device correctly.
i have examined the actual power button on the motherboard and that is working perfect.
what the hell is going on?
thanks
Rn
ps, i need my power button
cba putting my stylus in and taking it out whenever my backlight goes off
* if you want a picture of my plastic button, i will dissasemble my device and take a picture.
Pictures ?
so i was in the bathroom taking a shower and i was listning to music and i wanted to stop them my hands were wet and i hit the power button apparently some water got under the buttons nothing happen but after a wile i notoced i cant hold the power button down for i while to power it off please help i removed the battery what should i do ?
i'm running android btw via clk
rajaib said:
so i was in the bathroom taking a shower and i was listning to music and i wanted to stop them my hands were wet and i hit the power button apparently some water got under the buttons nothing happen but after a wile i notoced i cant hold the power button down for i while to power it off please help i removed the battery what should i do ?
i'm running android btw via clk
Click to expand...
Click to collapse
Primative thing I would do is let everything dry I am sure you did that , and how is it today?
GhostScalper said:
Primative thing I would do is let everything dry I am sure you did that , and how is it today?
Click to expand...
Click to collapse
i let it dry and i also used the hair dryer afer 24 i turned it on the home buttons is still pressing it self so i unbinded it and made the call key do it's function other than that it's awesome what can i say it HTC HD2
put it into safe mode by pressing the power+home. once you see a little text box reading safe mode at the bottom left hand corner of the screen, reboot it via battery. after that, take it out of safe mode by holding the power button for 30 sec.
hope this works! It did for me.
Good Luck.
---------- Post added at 02:46 AM ---------- Previous post was at 02:32 AM ----------
put it into safe mode by pressing the power+home. once you see a little text box reading safe mode at the bottom left hand corner of the screen, reboot it via battery. after that, take it out of safe mode by holding the power button for 30 sec.
hope this works! It did for me.
Good Luck.
So I was trying to replace a friends digitizer screen and in the process of doing so I ended up ripping the power button ribbon cable. When I plug the phone in with the battery in the orange light signifying it's charging goes one which I assume is somewhat of a good sign. But I still have the problem of the power button not working. Is there anyway I can turn this phone on with the power button?
steam374 said:
So I was trying to replace a friends digitizer screen and in the process of doing so I ended up ripping the power button ribbon cable. When I plug the phone in with the battery in the orange light signifying it's charging goes one which I assume is somewhat of a good sign. But I still have the problem of the power button not working. Is there anyway I can turn this phone on with the power button?
Click to expand...
Click to collapse
"Turn this phone on with the power button"
lol yeah sure just press it
Assuming that was a typo and you cannot turn it on; try to open adb then do "adb reboot"
Also I heard that when plugged in, the phone will boot into recovery if you are using CWM Touch (we have it on the dev section )
Hope I helped.
My power button gradually died over a week after having the phone since release. I took it all apart and let the power button and the little thing attached to it soak in pure alcohol and alcoholed the parts near the power button, it still doesn't work.
Everything else works however, screen starts charging when I plug it in,etc. Is there any way to turn on the Nexus 4 without the power button so I can use it again?
Thank you
just short the 2 golden contacts in the mobo(its what power button does '-') till it turns on
My power button has been getting stuck for the past week or so where if I press the button, it will stay pressed until I flex the phone a tad or gently tap part of the phone. This generally leads to have an endless bootloop caused by the power button always being pressed.
The button itself doesnt seem too bent or anything. I've also tried cleaning it incase its just being sticky. But that didn't work.
Ideas?
I fixed this problem but using a knife to slightly bent the metal around the power button away from the power button with a knife.