Note 7/S7 roms - Verizon Galaxy Note 3 Q&A, Help & Troubleshooting

What is the best note 7 or s7 port for 900v?

TheRock40359 said:
What is the best note 7 or s7 port for 900v?
Click to expand...
Click to collapse
Aryamod or darklord. I prefer Arya, a few bugs but awesome s7 port

https://www.dropbox.com/s/4ccybjtru3vmhg8/Darklord V4 Fixed By JCordero31.zip?dl=0
This is my personal one for our device ..I swapped out everything in this .when or if you flash just pick n900p for device and csc spr. For sprint.it will boot and should because mine does boot and say vzw after you get through setup good luck ......

hutchjim said:
https://www.dropbox.com/s/4ccybjtru3vmhg8/Darklord V4 Fixed By JCordero31.zip?dl=0
This is my personal one for our device ..I swapped out everything in this .when or if you flash just pick n900p for device and csc spr. For sprint.it will boot and should because mine does boot and say vzw after you get through setup good luck ......
Click to expand...
Click to collapse
So all I have to do is flash the zip and everything works?
I'm downloading it now

Yes that's it
---------- Post added at 06:17 AM ---------- Previous post was at 06:17 AM ----------
I love the rom so far

hutchjim said:
Yes that's it
---------- Post added at 06:17 AM ---------- Previous post was at 06:17 AM ----------
I love the rom so far
Click to expand...
Click to collapse
Im not getting any data or voice service

TheRock40359 said:
Im not getting any data or voice service
Click to expand...
Click to collapse
ok make sure you download a rom toolbox or something and go to data/imei/theres a dat file you can read it as a text file.make sure it says VZW ok and check your apns and see if the build.prop took the prop setting at the end for verizon and one more thing make sure the csc took also..thats it it should be good to go....

So I flash everything for sprint? And how do I check apns

TheRock40359 said:
So I flash everything for sprint? And how do I check apns
Click to expand...
Click to collapse
You don't have to cause it gets replaced through aroma. Just flash it like you would for sprint yes.i have all the vzw files under sprint so I didn't have to mess with the update script.simple.....

hutchjim said:
You don't have to cause it gets replaced through aroma. Just flash it like you would for sprint yes.i have all the vzw files under sprint so I didn't have to mess with the update script.simple.....
Click to expand...
Click to collapse
I've done exactly as u said I still get no service. It does say vzw. What did u flash with? I used twrp 2.8.7.0

that should be fine as long it flashes.did you check the apns with a app like I use rom toolbox.i don't understand at all mine works how about your modem is that up to date?
---------- Post added at 05:24 PM ---------- Previous post was at 05:12 PM ----------
TheRock40359 said:
I've done exactly as u said I still get no service. It does say vzw. What did u flash with? I used twrp 2.8.7.0
Click to expand...
Click to collapse
did you check everything out with a root app like rom toolbox
---------- Post added at 05:54 PM ---------- Previous post was at 05:24 PM ----------
you sure your activated just thinking

hutchjim said:
that should be fine as long it flashes.did you check the apns with a app like I use rom toolbox.i don't understand at all mine works how about your modem is that up to date?
---------- Post added at 05:24 PM ---------- Previous post was at 05:12 PM ----------
did you check everything out with a root app like rom toolbox
---------- Post added at 05:54 PM ---------- Previous post was at 05:24 PM ----------
you sure your activated just thinking
Click to expand...
Click to collapse
I'm activated. And apns are all verizon. I get service but it is just for a few seconds I get a message every few min asking to turn on mobile data

TheRock40359 said:
I'm activated. And apns are all verizon. I get service but it is just for a few seconds I get a message every few min asking to turn on mobile data
Click to expand...
Click to collapse
I'll try to re-download it maybe zip just got messed up

maybe i am on total wireless which is on verizon network turn data on when that comes up also. look under about phone and find sim click that and see if its connected and imei is being desplayed ect.........i dont know everything just works for me fine .......i downloaded it from my dropbox and unzipped it .its all there so something is missing or your modem stuck maybe theres a app for that on playstore..under samsung codes..im also useing the darklord-kernel-marshmallow-newux-hlte-vzw-v2.0.zip

Where can I download the darklord kernel? I can't find a working link

hutchjim said:
maybe i am on total wireless which is on verizon network turn data on when that comes up also. look under about phone and find sim click that and see if its connected and imei is being desplayed ect.........i dont know everything just works for me fine .......i downloaded it from my dropbox and unzipped it .its all there so something is missing or your modem stuck maybe theres a app for that on playstore..under samsung codes..im also useing the darklord-kernel-marshmallow-newux-hlte-vzw-v2.0.zip
Click to expand...
Click to collapse
OK I've finally got it. But is there a way to get gallery to read photos from SD card?

i only get 3g

Is it possible to flash an international rom and change the apn?

Well with my experience it does have to be sprint involved because it's a CDMA device.that's what I look for before I switch out Verizon files to sprint..I ran into bad provisions with the simple card because I didn't switch out the files before.make sense

hutchjim said:
Well with my experience it does have to be sprint involved because it's a CDMA device.that's what I look for before I switch out Verizon files to sprint..I ran into bad provisions with the simple card because I didn't switch out the files before.make sense
Click to expand...
Click to collapse
How do I switch the sprint files to Verizon?

Related

My First Droid Razr M Experience

I got a Droid Razr M for an upgrade, Worked great so i rooted it, Still worked great all that day, then i went to sleep and when i woke and the WiFi would not work!
The toggle switch turned a darker gray, When i tap it it turns on then in a split second turns back off.
I have done a Factory Data Reset and then i did a hard reset and then i wiped the hole thing out and re flashed it to its original state. Still would not work!
So as a last resort contact Motorola for support and they tell me that i had rooted my device and there is nothing they can do. I didn't say anything about rooting it so they must be logging all users data. (Invasion of Privacy?)
So i am back here again, Not being able to use WiFi, On a 2GB/M plan. f%$king peace of $#!+.
Nothing else is bad! Its just the wifi!?
SaturnsVoid said:
I got a Droid Razr M for an upgrade, Worked great so i rooted it, Still worked great all that day, then i went to sleep and when i woke and the WiFi would not work!
The toggle switch turned a darker gray, When i tap it it turns on then in a split second turns back off.
I have done a Factory Data Reset and then i did a hard reset and then i wiped the hole thing out and re flashed it to its original state. Still would not work!
So as a last resort contact Motorola for support and they tell me that i had rooted my device and there is nothing they can do. I didn't say anything about rooting it so they must be logging all users data. (Invasion of Privacy?)
So i am back here again, Not being able to use WiFi, On a 2GB/M plan. f%$king peace of $#!+.
Nothing else is bad! Its just the wifi!?
Click to expand...
Click to collapse
It is probably your fault. A broken radio is your burden why do you think they do not want you rooting? The radio partition can get borked very easily. You need to renew it.
Do my restore. See my signature
aviwdoowks said:
It is probably your fault. A broken radio is your burden why do you think they do not want you rooting? The radio partition can get borked very easily. You need to renew it.
Do my restore. See my signature
Click to expand...
Click to collapse
your hole thread is too big for me, Could you PM me the steps i need to take? I can't figure out you what i need to do in the thread
SaturnsVoid said:
your hole thread is too big for me, Could you PM me the steps i need to take? I can't figure out you what i need to do in the thread
Click to expand...
Click to collapse
Are you unlocked? (Bootloader?)
the auzess
aviwdoowks said:
Are you unlocked? (Bootloader?)
Click to expand...
Click to collapse
Yes, Its Unlocked. I need to get it fixed.
SaturnsVoid said:
Yes, Its Unlocked. I need to get it fixed.
Click to expand...
Click to collapse
There is a lot of verbal running on there but few steps. Read the rsd tutorial & get rsd to see the phone while you have the phone in bootloader - fastboot. Then stop & check in here again....
---------- Post added at 06:35 PM ---------- Previous post was at 06:34 PM ----------
Also DL the full version xml.
aviwdoowks said:
There is a lot of verbal running on there but few steps. Read the rsd tutorial & get rsd to see the phone while you have the phone in bootloader - fastboot. Then stop & check in here again....
---------- Post added at 06:35 PM ---------- Previous post was at 06:34 PM ----------
Also DL the full version xml.
Click to expand...
Click to collapse
Well i have the phone in Fastboot, I don't know where to get the full version XML file
SaturnsVoid said:
Yes, Its Unlocked. I need to get it fixed.
Click to expand...
Click to collapse
SaturnsVoid said:
Well i have the phone in Fastboot, I don't know where to get the full version XML file
Click to expand...
Click to collapse
You must read my OP!
The link is the last thing there.
aviwdoowks said:
You must read my OP!
The link is the last thing there.
Click to expand...
Click to collapse
Well i downloaded the last link (VZW_XT907-4.1.2-9.8.1Q-66_1FF.XML.ZIP) and had RSD try and Flash it while it was in Fastboot mode... It failed saying "6/19 flash tz "tz.mbn" -> Phone returned FAIL."
Did i do something wrong?
SaturnsVoid said:
Well i downloaded the last link (VZW_XT907-4.1.2-9.8.1Q-66_1FF.XML.ZIP) and had RSD try and Flash it while it was in Fastboot mode... It failed saying "6/19 flash tz "tz.mbn" -> Phone returned FAIL."
Did i do something wrong?
Click to expand...
Click to collapse
That is the err you would get if your boot was locked.
Edit FOLLOW the OP!!
You downloaded THE WRONG XML!!!#$#&
---------- Post added at 07:14 PM ---------- Previous post was at 07:03 PM ----------
You need VRZ_XT907_9.8.1Q-78-1_1FF.xml.zip
& then paste the mod into it!!!
OR
THE FULL ver.
aviwdoowks said:
That is the err you would get if your boot was locked.
Edit FOLLOW the OP!!
You downloaded THE WRONG XML!!!#$#&
---------- Post added at 07:14 PM ---------- Previous post was at 07:03 PM ----------
You need VRZ_XT907_9.8.1Q-78-1_1FF.xml.zip
& then paste the mod into it!!!
OR
THE FULL ver.
Click to expand...
Click to collapse
Well i am download that, But my phone is LOCKED... I can get root still but i dont know about unlocking... You know anything?
SaturnsVoid said:
Well i am download that, But my phone is LOCKED... I can get root still but i dont know about unlocking... You know anything?
Click to expand...
Click to collapse
Gen. Forum: root method work around.... look for my op.
---------- Post added at 07:27 PM ---------- Previous post was at 07:23 PM ----------
I think you can follow the prev rzr method but it is a method similar to mine but for locked BL @ 600 + mb . Not just the new motochopper.
aviwdoowks said:
Gen. Forum: root method work around.... look for my op.
---------- Post added at 07:27 PM ---------- Previous post was at 07:23 PM ----------
I think you can follow the prev rzr method but it is a method similar to mine but for locked BL @ 600 + mb . Not just the new motochopper.
Click to expand...
Click to collapse
Well i did that all, Still does not work... I don't understand!?
SaturnsVoid said:
Well i did that all, Still does not work... I don't understand!?
Click to expand...
Click to collapse
You did the rzr forum method? Get help there, I do not support locked phones.
---------- Post added at 09:08 PM ---------- Previous post was at 08:32 PM ----------
Basically can you just do a rsd restore then use the new motochopper? Can someone chime in to confirm?
For a locked phone?
I just realized you never went to my restore thread. That explains your confusion. It's link is in the middle of my goodies page. I put it in my signature now.
http://forum.xda-developers.com/showthread.php?t=2391641
Ok, SaturnsVoid... so, first, sorry to hear about the problem. Motorola/VZ is giving you BS... rooting won't break your WiFi unless you did something or installed something that would...
What's your current system version?
Have you taken any OTAs since you had it? If not, you may still be able to unlock.
Also, may want to try using WiFi Connection Fixer on the Play Store (requires root...)
If those don't work, try PMing me... I can help you work it out...

Successful Root?

Hey guys, another question here.
Ive been watching arters thread for some time now and i have yet to see anyone there post with the model [SM-G928P]. This model pertains to the sprint verison i currently hold but was wondering if anyone else with this model has been able to somehow root the phone?
Completely dumbfounded at how many models and versions sammy has released with this phone. Or maybe im the unlucky one and have the only P version in the world
Not complaining but was just curious is all.
arter97 said that he won't support Sprint.
Also as far as I know Sprint and Verizon has locked bootloader and when you root the phone, you won't be able to turn it on again.
AK1149 said:
arter97 said that he won't support Sprint.
Also as far as I know Sprint and Verizon has locked bootloader and when you root the phone, you won't be able to turn it on again.
Click to expand...
Click to collapse
Sprint can be rooted. It is not yet. See Sprint Note 5 dev thread for the "possibilities " The sprint s6e+ phone should have the same rootabilty as the Sprint note 5.
Sent from my SM-G928P using Tapatalk
Thats sad to hear. Also i thought it was AT&T and Verizon with the locked bootloaders? Or was i mistaken?
Oh yeah sorry.
arter97 said he doesn't want to develop it for CDMA Devices, which is Sprint. So, someone MAY come up with root.
Hi
your answer is right and i am agree with this.Thank you for your informative task .
Thats sad to hear. It seems like a great start for the S6E+ however. Hopefully us CDMA users can join the party soon enough. Thanks for the info on arter AK. Appriciate it.
g928p root
here check this page out
technosamigos.com
im finally rooted but of course it never ends! i cant update my firmware to install a new rom!!!
if i get new firmware installed then i could install a new rom, then get my free hotspot up n goin!
Has it been rooted yet I have the same model I'm looking for root but I updated it when they sent the last patch
thecrakedskull said:
Has it been rooted yet I have the same model I'm looking for root but I updated it when they sent the last patch
Click to expand...
Click to collapse
https://download.chainfire.eu/807/CF-Root/CF-Auto-Root/CF-Auto-Root-zenltespr-zenltespr-smg928p.zip
7.0
---------- Post added at 10:21 PM ---------- Previous post was at 10:20 PM ----------
7.0
https://autoroot.chainfire.eu/
Will it work even if the build Id is not the same?
---------- Post added at 09:43 PM ---------- Previous post was at 09:42 PM ----------
jesusrios said:
https://download.chainfire.eu/807/CF-Root/CF-Auto-Root/CF-Auto-Root-zenltespr-zenltespr-smg928p.zip
7.0
---------- Post added at 10:21 PM ---------- Previous post was at 10:20 PM ----------
7.0
https://autoroot.chainfire.eu/
Click to expand...
Click to collapse
Will it work even if the build Id is not the same
Thx man I did it
how can i change chine firmware to adopt the s6 edge+ phne given to me from china so the a can freely use here in philippines? thanks

What is this notification tray icon?

This may be a stupid question, but I recently reflashed my device to stock PD8 and I have this cloud icon next to the signal status. It never goes away. It is even haunting my dreams. Pls help
its the volte icon , you can disable it in phone settings by turning it off , i am also looking for a way to disable the icon without disabling volte
---------- Post added at 12:35 PM ---------- Previous post was at 12:32 PM ----------
i also tried this method to no avail , maybe you have better luck
http://forum.xda-developers.com/verizon-s7-edge/themes/mod-remove-rcs-service-volte-service-t3411206
nxsone said:
its the volte icon , you can disable it in phone settings by turning it off , i am also looking for a way to disable the icon without disabling volte
---------- Post added at 12:35 PM ---------- Previous post was at 12:32 PM ----------
i also tried this method to no avail , maybe you have better luck
http://forum.xda-developers.com/verizon-s7-edge/themes/mod-remove-rcs-service-volte-service-t3411206
Click to expand...
Click to collapse
Yeah, didn't work. I'm going to try modding it myself and see what I can come up with
Flippy125 said:
Yeah, didn't work. I'm going to try modding it myself and see what I can come up with
Click to expand...
Click to collapse
pls share if you find a way , its also bugging me .
If its showing up then your not fully stock.
omf05 said:
If its showing up then your not fully stock.
Click to expand...
Click to collapse
What do you mean by not fully stock
Sent from my SM-G935T using Tapatalk
nxsone said:
What do you mean by not fully stock
Click to expand...
Click to collapse
You have to Odin back to stock. You can't just wipe in factory recovery, it still leaves the eng kernel in place.
Well I was on official PG1 firmware , and followed the instructions on how to root I did it and nothing of my stuff got erased neither did I factory reset anything
Sent from my SM-G935T using Tapatalk
---------- Post added at 01:16 PM ---------- Previous post was at 01:14 PM ----------
So to do this the right way I have to
1 Odin back to stock
2 run root presses
Sent from my SM-G935T using Tapatalk
I removed all traces of the icon in the imsservice.apk and it is still showing up. I'm going to dig into SystemUi.apk and see if it's in there. Will be busy until tomorrow catching Pokemon at a PG meet up, but I'll keep you guys updated.
Yeah that shouldn't be showing up if you're completely stock. IF you still have the eng-kernel then it'll be there no matter what you do unless you either edit the imsservice.apk file or odin back to stock factory rom.
Binary100100 said:
Yeah that shouldn't be showing up if you're completely stock. IF you still have the eng-kernel then it'll be there no matter what you do unless you either edit the imsservice.apk file or odin back to stock factory rom.
Click to expand...
Click to collapse
Even editing the apk isn't working. I feel like it's deeper in the system. I removed every trace of stat_notify_volte* and stat_notify_rcs* and it is still there
Flippy125 said:
Even editing the apk isn't working. I feel like it's deeper in the system. I removed every trace of stat_notify_volte* and stat_notify_rcs* and it is still there
Click to expand...
Click to collapse
There are threads throughout the forum about removing the rcs icon in the status bar. It shouldn't be too difficult to remove. I was able to do it but I was receiving an "imsservice error" every time I called certain people. Which lead me to believe it wasn't completely effective so I reverted completely back to stock (it was gone) then flashed the engkernel (which brought it back) and from there I simply considered it a small price to pay for root access. Wouldn't you agree?
It's there to remind you of root
Sent from my SM-G935T using XDA-Developers mobile app

U Firmware Step By Step

Would Anyone Like To Post Detailed Instructions On How To Flash The "U FIRMWARE"? .. Also (if possible) could someone include all the necessary files & give any details on the firmware (i.e. Pros or Cons).. I've seen it mentioned in a few other threads, with some people making claims that it's much smoother, also the root is more stable on that firmware. But I can't seem to find a dedicated thread on it. So if there's one out there post the link or feel free to comment instructions, any useful instructions will be added to the OP
geor9iaboy said:
Would Anyone Like To Post Detailed Instructions On How To Flash The "U FIRMWARE"? .. Also (if possible) could someone include all the necessary files & give any details on the firmware (i.e. Pros or Cons).. I've seen it mentioned in a few other threads, with some people making claims that it's much smoother, also the root is more stable on that firmware. But I can't seem to find a dedicated thread on it. So if there's one out there post the link or feel free to comment instructions, any useful instructions will be added to the OP
Click to expand...
Click to collapse
Hi, here's something from our friends with a Verizon s7 edge, they've written a step by step on how to flash the U firmware and what to do afterwards. What You and us t-mobile users need to flash is SM- G935U (TMO region) firmware which u can find on sammobile.com. Please read the instructions carefully and best of luck with flashing. Cheers!
http://forum.xda-developers.com/ver...de-flashing-sm-935u-firmware-verizon-t3415145
Magnifik81 said:
...What You and us t-mobile users need to flash is SM- G935U (TMO region) firmware which u can find on sammobile.com. ...[/url]
Click to expand...
Click to collapse
Mine is model SM-G35T, would the T-Mobile USA version of SM-G935U still work with mine?
Thank you.
Namuna said:
Mine is model SM-G35T, would the T-Mobile USA version of SM-G935U still work with mine?
Thank you.
Click to expand...
Click to collapse
Yeah it will but you need to find the right one on sammobile. The one for G9535T TMO region next to itself. The the rest of the procedure is the same as described in the post i shared. I will it leave it to you to do some research on your own and find the right files. Cheers!
Hey all, best place for U firmware is THEANDROIDSOUL.COM . they also have all other Samsung firmwares. So good flashing
Does it require root to flash U on the tmo variant?
Does it trip Knox?
Thanks
whittikins said:
Does it require root to flash U on the tmo variant?
Does it trip Knox?
Thanks
Click to expand...
Click to collapse
Dont need root and won't trip Knox
Sent from my SM-G935U using Tapatalk
Magnifik81 said:
Hi, here's something from our friends with a Verizon s7 edge, they've written a step by step on how to flash the U firmware and what to do afterwards. What You and us t-mobile users need to flash is SM- G935U (TMO region) firmware which u can find on sammobile.com. Please read the instructions carefully and best of luck with flashing. Cheers!
http://forum.xda-developers.com/ver...de-flashing-sm-935u-firmware-verizon-t3415145
Click to expand...
Click to collapse
Keep in mind there's also a lot in here that doesn't pertain especially if you don't need root so be careful people, this as Mag says is for Verizon but the process is the same just make sure you have the T-Mobile files if on T-Mobile. You can download at SamMobile I have a SM-G935T which is now a G35U with the new modem APK1 and have wifi calling and VOLTE in my mobile network settings and ZERO bloat which is why U firmware is desired. It doesn't have any carrier bloat because it's not for any carrier so none have installed all their bloat so it's very fast. You will lose root and everything but can redo it and reroot also.. just make sure you're getting the right files and not flashing VZW on to T-Mobile etc etc. I ALMOST did then realized lol. I Got excited. I was never going to root so none if that mattered but I tried it and after all the suggested tweaks and fixed it still ran unacceptable for me so I'm not rooted at all now. Too buggy and too many weird FCs and errors/bugs so I factory rest and flashed U and new modem and my phone has never been faster even when rooted and CPU setting tweaked etc. (Too many bugs as stated)
Fas
---------- Post added at 12:38 PM ---------- Previous post was at 12:36 PM ----------
whittikins said:
Does it require root to flash U on the tmo variant?
Does it trip Knox?
Thanks
Click to expand...
Click to collapse
No because you're flashing an official firmware not a rom. No root and won't trip Knox as other have reported. This is true for all variants since it's an official firmware.
---------- Post added at 12:39 PM ---------- Previous post was at 12:38 PM ----------
I know I'm replying to some old posts here. But just
re-ittirating what others have said since many are just now starting to do the whole U thing.
Fas
i have a guide on this forum look it up
faslane said:
Keep in mind there's also a lot in here that doesn't pertain especially if you don't need root so be careful people, this as Mag says is for Verizon but the process is the same just make sure you have the T-Mobile files if on T-Mobile. You can download at SamMobile I have a SM-G935T which is now a G35U with the new modem APK1 and have wifi calling and VOLTE in my mobile network settings and ZERO bloat which is why U firmware is desired. It doesn't have any carrier bloat because it's not for any carrier so none have installed all their bloat so it's very fast. You will lose root and everything but can redo it and reroot also.. just make sure you're getting the right files and not flashing VZW on to T-Mobile etc etc. I ALMOST did then realized lol. I Got excited. I was never going to root so none if that mattered but I tried it and after all the suggested tweaks and fixed it still ran unacceptable for me so I'm not rooted at all now. Too buggy and too many weird FCs and errors/bugs so I factory rest and flashed U and new modem and my phone has never been faster even when rooted and CPU setting tweaked etc. (Too many bugs as stated)
Fas
---------- Post added at 12:38 PM ---------- Previous post was at 12:36 PM ----------
No because you're flashing an official firmware not a rom. No root and won't trip Knox as other have reported. This is true for all variants since it's an official firmware.
---------- Post added at 12:39 PM ---------- Previous post was at 12:38 PM ----------
I know I'm replying to some old posts here. But just
re-ittirating what others have said since many are just now starting to do the whole U thing.
Fas
Click to expand...
Click to collapse
Will Xposed work with no issues on this?
I'm currently rooted with Xposed installed , but the lag is driving me nuts even with all the tweaks
Izz14 said:
Will Xposed work with no issues on this?
I'm currently rooted with Xposed installed , but the lag is driving me nuts even with all the tweaks
Click to expand...
Click to collapse
Prob not. Many people including me have done ALL of the post root modifying to make it run better when rooted with very little success. I tried every single post root method to try and get it stable and nothing made a difference and if it did it sure wasn't stable anyways. So bad that I Reodined the entire thing and started fresh and didn't root. The root is very unstable and simply not worth it. I don't need root for anything I care about anyway and my S7 Edge is plenty fast. and running the U firmware there's no bloat except like 2-3 apps which I can live with and that was one major reason to root anyway (to delete the bloat) so meh to root for me.... If you read back many have reported this. I don't need nor want root and when I saw how bad it ran I immediately re did it all. Now it's lightning fast, I get amazing LTE speeds because if the APK1 MODEM and I'm in one if the 319 cities supporting the 4x4 MIMO LTE that the APJ1 Takes advantage of. My LTE is faster than most people's wifi. So I recommend d regarding the Odin and forgetting about root. It's just too buggy and I'm by no way a noob. Been here fir 10 years so I know what I'm doing and I couldn't get it stable enough even applying every single post root suggestion. It ran like crap and wasn't even usable unfortunately. No offense to the root team whatsoever they achieved root and kudos to them it's just not established enough to be a daily driver sorry to say.
My latest LTE speed abiut 20 mins ago. Not wifi....LTE..LOL it's amazing if yoyre in T-Mobile and you're in one if the cities supporting it. I imagine everywhere in the US will sooner or later it most cities. It's relatively new but I'm getting speeds unheard of. Before this I was getting like 10 mbps download and 8 Mbps upload
Not it's more like 6p-70 and 40-70 depending in where in my city I am. It varies deoending on how close to towers and what not you are if course. But damn it's fast.. wow
nandroiduser said:
i have a guide on this forum look it up
Click to expand...
Click to collapse
please quote the person you're replying to so we know who you're talking to. lol...it's a huge help! +1
Fas
is there a way to install this U firmware and then simply root it and not install all the other junk? I love it running U stock with the new modem because it HAULS ass, but I want to root so I can edit the build.prop and since you have to be rooted that's hay I ask. But the root causes all kinds of issues and post -root stuff needs to happen to get it even stable which none worked for me, a few did but it ran horrible so I immediately returned to stock and redid the U firmware. so is the something like a way to just root for file access only without it modifying anything else? I doubt it but don't know much abut the U firmware except it runs amazing until rooted at least from everything I'm reading. a couple peeps claim there's is running amazing even rooted but I have doubts...mine ran like total crap even after applying all the tweaks and kernel settings with Trickster and the like (which I know how to use very well and bought it and have owned and used it for years....any ideas? I want to edit the lcd from 640 to about 580 is all and don't want to root if it's going to bork everything up again...
TIA
Fas +1
i've tried multiple times and it fails to flash. any ideas why?
"FAIL! (Auth)"
Hi -
I am a person that just has to have his phone rooted. Dont ask me why, but I do. And I love custom ROMS. Since I do not really see any custom ROMS for the S7 yet,
I will settle for just rooting my S7, I was hopping someone would be kind enough to point me to the correct files needed to ROOT my phone and maybe a small odin walkthrough.
Phone info:
Galaxy S7 SM-G935T 6.0.1
Baseband G935TUVU4APK1
Build Number MNB29M.G35TUVU4APK1
Also ... what about TWRP support ? I want to be able to nandroid backup. Is there a version of TWRP out yet for the S7 ?
Thanks all !!
faslane said:
please quote the person you're replying to so we know who you're talking to. lol...it's a huge help! +1
Fas
Click to expand...
Click to collapse
Hi? Is it possible to downgrade to PB5 from the U firmware? I learnt latest stock got bootloader locked, so can't downgrade
faslane said:
is there a way to install this U firmware and then simply root it and not install all the other junk? I love it running U stock with the new modem because it HAULS ass, but I want to root so I can edit the build.prop and since you have to be rooted that's hay I ask. But the root causes all kinds of issues and post -root stuff needs to happen to get it even stable which none worked for me, a few did but it ran horrible so I immediately returned to stock and redid the U firmware. so is the something like a way to just root for file access only without it modifying anything else? I doubt it but don't know much abut the U firmware except it runs amazing until rooted at least from everything I'm reading. a couple peeps claim there's is running amazing even rooted but I have doubts...mine ran like total crap even after applying all the tweaks and kernel settings with Trickster and the like (which I know how to use very well and bought it and have owned and used it for years....any ideas? I want to edit the lcd from 640 to about 580 is all and don't want to root if it's going to bork everything up again...
TIA
Fas +1
Click to expand...
Click to collapse
Follow the instructions in the O.P. of the post-root issues *exactly*. Don't skip anything and don't add anything. Trickster is not listed in it. I followed it exactly and my rooted U just plain smokes!
---------- Post added at 04:58 PM ---------- Previous post was at 04:54 PM ----------
Thibor69 said:
Hi -
Since I do not really see any custom ROMS for the S7 yet
Also ... what about TWRP support ? I want to be able to nandroid backup. Is there a version of TWRP out yet for the S7 ?
Thanks all !!
Click to expand...
Click to collapse
The answer to both of these is that since the bootloader is locked, you can't install custom recoveries which makes custom Roms a lot harder (but not impossible!) There's two that are in the Roms subforum (TEK and Echoe) but I've personally found stock U firmware + root to be the fastest/most stable.
DOMF said:
Follow the instructions in the O.P. of the post-root issues *exactly*. Don't skip anything and don't add anything. Trickster is not listed in it. I followed it exactly and my rooted U just plain smokes!
---------- Post added at 04:58 PM ---------- Previous post was at 04:54 PM ----------
The answer to both of these is that since the bootloader is locked, you can't install custom recoveries which makes custom Roms a lot harder (but not impossible!) There's two that are in the Roms subforum (TEK and Echoe) but I've personally found stock U firmware + root to be the fastest/most stable.
Click to expand...
Click to collapse
I'm not rooted at all now you realize correct?
Ty,!! +1
Fas
---------- Post added at 05:56 PM ---------- Previous post was at 05:53 PM ----------
jazzdglass said:
Hi? Is it possible to downgrade to PB5 from the U firmware? I learnt latest stock got bootloader locked, so can't downgrade
Click to expand...
Click to collapse
Honestly I don't know. Haven't tried. U firmware smokes sonI wouldn't want to anyway lol. Maybe someone else knows
Fas
The bootloader's are all still locked so not sure that'd matter but I couldn't say.
Fas
---------- Post added at 06:02 PM ---------- Previous post was at 05:56 PM ----------
Thibor69 said:
Hi -
I am a person that just has to have his phone rooted. Dont ask me why, but I do. And I love custom ROMS. Since I do not really see any custom ROMS for the S7 yet,
I will settle for just rooting my S7, I was hopping someone would be kind enough to point me to the correct files needed to ROOT my phone and maybe a small odin walkthrough.
Phone info:
Galaxy S7 SM-G935T 6.0.1
Baseband G935TUVU4APK1
Build Number MNB29M.G35TUVU4APK1
Also ... what about TWRP support ? I want to be able to nandroid backup. Is there a version of TWRP out yet for the S7 ?
Thanks all !!
Click to expand...
Click to collapse
Is your reason for "have to have root" for a specific reason or no? This root us really laggy and buggy as hell so if I were you I wouldn't do it. There's no Roms really. Well two I think but it's going to be more if a headache than the benefit of root. No one "has" to have root. What do you need that's so important by rooting. That's silly....
---------- Post added at 06:04 PM ---------- Previous post was at 06:02 PM ----------
Dbzadct said:
i've tried multiple times and it fails to flash. any ideas why?
"FAIL! (Auth)"
Click to expand...
Click to collapse
What fails,? What happens? Details...which files did you use from where and what fails at what spot in the process?
---------- Post added at 06:05 PM ---------- Previous post was at 06:04 PM ----------
Dbzadct said:
i've tried multiple times and it fails to flash. any ideas why?
"FAIL! (Auth)"
Click to expand...
Click to collapse
Did you flash the home CSC or non home?
---------- Post added at 06:07 PM ---------- Previous post was at 06:05 PM ----------
Thibor69 said:
Hi -
I am a person that just has to have his phone rooted. Dont ask me why, but I do. And I love custom ROMS. Since I do not really see any custom ROMS for the S7 yet,
I will settle for just rooting my S7, I was hopping someone would be kind enough to point me to the correct files needed to ROOT my phone and maybe a small odin walkthrough.
Phone info:
Galaxy S7 SM-G935T 6.0.1
Baseband G935TUVU4APK1
Build Number MNB29M.G35TUVU4APK1
Also ... what about TWRP support ? I want to be able to nandroid backup. Is there a version of TWRP out yet for the S7 ?
Thanks all !!
Click to expand...
Click to collapse
No two. Locked boitloader still so no way to install twrp.
---------- Post added at 06:09 PM ---------- Previous post was at 06:07 PM ----------
Dbzadct said:
i've tried multiple times and it fails to flash. any ideas why?
"FAIL! (Auth)"
Click to expand...
Click to collapse
Please provide more info what phone are you flashing. Where did you get the files, are you flashing the home CSC or other one what's exactly happening. Fail is too vague to help you fix.
jazzdglass said:
Hi? Is it possible to downgrade to PB5 from the U firmware? I learnt latest stock got bootloader locked, so can't downgrade
Click to expand...
Click to collapse
I'm not sure bud. I LOVE the U firmware and the APK1 modem for Tmobile have made my LTE VERY fast and the U firmware as well with ZERO bloat. I wouldn't downgrade anyway but can't answer your question, I simply don't know. Are you on ATT or something? I haven't heard of that firmware even...but I've been on Tmobile for about 6 years or so...
Fas
What fails,? What happens? Details...which files did you use from where and what fails at what spot in the process?
---------- Post added at 06:05 PM ---------- Previous post was at 06:04 PM ----------
Did you flash the home CSC or non home?
---------- Post added at 06:07 PM ---------- Previous post was at 06:05 PM ----------
No two. Locked boitloader still so no way to install twrp.
---------- Post added at 06:09 PM ---------- Previous post was at 06:07 PM ----------
Please provide more info what phone are you flashing. Where did you get the files, are you flashing the home CSC or other one what's exactly happening. Fail is too vague to help you fix.[/QUOTE]
sorry rookie mistake, i was on latest update for the Tmo version, i flashed the Home CSC, it started the first few steps and then got that error. this is the firmware i was using TMB-G935UUEU2APEH-2-160614112610

unlocked S8 [G950U] after Android update can't connect to 4G or 3G network

Hi
I bought an S8 G950U unlocked with Android 8 , it was working perfect as normal connecting to 4G(LTE) and 3G in Algeria.
The day that i upgrade it to android 9 , i wasn't able to connect to 4G and to use mobile hotspot.
I brought my phone to a repairer he flashed my phone and it stucks in "Galaxy S8" screen and loops.
i used odin to flash ADP with firmware (csc: CHA) , it enters to android and it reads the sim in 2G but i can,t reach neither 4G nor 3G.
i think he erased the NAND because the serial number and model number are not true.
and i've other problem, the dial codes like *#06# or *#0011# doesn't work.
idon't know what i should i do. please Help
idrissbravo said:
Hi
I bought an S8 G950U unlocked with Android 8 , it was working perfect as normal connecting to 4G(LTE) and 3G in Algeria.
The day that i upgrade it to android 9 , i wasn't able to connect to 4G and to use mobile hotspot.
I brought my phone to a repairer he flashed my phone and it stucks in "Galaxy S8" screen and loops.
i used odin to flash ADP with firmware (csc: CHA) , it enters to android and it reads the sim in 2G but i can,t reach neither 4G nor 3G.
i think he erased the NAND because the serial number and model number are not true.
and i've other problem, the dial codes like *#06# or *#0011# doesn't work.
idon't know what i should i do. please Help
Click to expand...
Click to collapse
can you screenshot your "about phone" screen and post it here? Please be sure to block out your sensitive info like phone number, IMEI, ESN etc etc
youdoofus said:
can you screenshot your "about phone" screen and post it here? Please be sure to block out your sensitive info like phone number, IMEI, ESN etc etc
Click to expand...
Click to collapse
i don't know from where i post photos here
And links
idrissbravo said:
i don't know from where i post photos here
And links
Click to expand...
Click to collapse
You can't post pics or links yet. Either 10 or 25 posts.
I always tell people first check imei. Make sure the device isn't black listed. If that's good. We need to make sure it's truly sim unlocked. If so. Then maybe need to flash your carriers csc
---------- Post added at 02:32 PM ---------- Previous post was at 02:30 PM ----------
idrissbravo said:
Hi
I bought an S8 G950U unlocked with Android 8 , it was working perfect as normal connecting to 4G(LTE) and 3G in Algeria.
The day that i upgrade it to android 9 , i wasn't able to connect to 4G and to use mobile hotspot.
I brought my phone to a repairer he flashed my phone and it stucks in "Galaxy S8" screen and loops.
i used odin to flash ADP with firmware (csc: CHA) , it enters to android and it reads the sim in 2G but i can,t reach neither 4G nor 3G.
i think he erased the NAND because the serial number and model number are not true.
and i've other problem, the dial codes like *#06# or *#0011# doesn't work.
idon't know what i should i do. please Help
Click to expand...
Click to collapse
I don't know how to flash the csc from other countries. Maybe try flashing the newest u1 bit 6 firmware. In the latest Odin
TheMadScientist said:
You can't post pics or links yet. Either 10 or 25 posts.
I always tell people first check imei. Make sure the device isn't black listed. If that's good. We need to make sure it's truly sim unlocked. If so. Then maybe need to flash your carriers csc
---------- Post added at 02:32 PM ---------- Previous post was at 02:30 PM ----------
I don't know how to flash the csc from other countries. Maybe try flashing the newest u1 bit 6 firmware. In the latest Odin
Click to expand...
Click to collapse
i've checked my phone is "clean status" is not black listed it was working normally.
G950U1 ? U1 bit 6 firmware i will search to try thanks
TheMadScientist said:
You can't post pics or links yet. Either 10 or 25 posts.
I always tell people first check imei. Make sure the device isn't black listed. If that's good. We need to make sure it's truly sim unlocked. If so. Then maybe need to flash your carriers csc
---------- Post added at 02:32 PM ---------- Previous post was at 02:30 PM ----------
I don't know how to flash the csc from other countries. Maybe try flashing the newest u1 bit 6 firmware. In the latest Odin
Click to expand...
Click to collapse
you dont know how to flash other countries CSC's?
---------- Post added at 02:01 PM ---------- Previous post was at 02:00 PM ----------
idrissbravo said:
i've checked my phone is "clean status" is not black listed it was working normally.
G950U1 ? U1 bit 6 firmware i will search to try thanks
Click to expand...
Click to collapse
im running the U1 version of the firmware for my phone and its been perfect. The U1 is the unbranded version, so no dumb boot animation anymore etc etc
youdoofus said:
you dont know how to flash other countries CSC's?
Click to expand...
Click to collapse
after flashing many csc (there is no for my country for 950U) it stucks in bootloop
I have no boot animation but there is sprint OMADM notification now
youdoofus said:
you dont know how to flash other countries CSC's?
---------- Post added at 02:01 PM ---------- Previous post was at 02:00 PM ----------
im running the U1 version of the firmware for my phone and its been perfect. The U1 is the unbranded version, so no dumb boot animation anymore etc etc
Click to expand...
Click to collapse
Yea since I'm in us I don't habe to mess with changing csc never had to. That's what it sounds like if he updated. It replaced the csc to. And don't know what to do with his sim. Unless his apn is gone and needs 're input
---------- Post added at 03:07 PM ---------- Previous post was at 03:05 PM ----------
idrissbravo said:
after flashing many csc (there is no for my country for 950U) it stucks in bootloop
Click to expand...
Click to collapse
I've seen guys flash other country csc files. I just don't know the method as I believe Odin will fail.
TheMadScientist said:
Yea since I'm in us I don't habe to mess with changing csc never had to. That's what it sounds like if he updated. It replaced the csc to. And don't know what to do with his sim. Unless his apn is gone and needs 're input
---------- Post added at 03:07 PM ---------- Previous post was at 03:05 PM ----------
I've seen guys flash other country csc files. I just don't know the method as I believe Odin will fail.
Click to expand...
Click to collapse
since you would be technically changing carrier information with the Odin flash, yes, it should fail in stock Odin. But it will work in modded Odin.
---------- Post added at 03:07 PM ---------- Previous post was at 03:05 PM ----------
idrissbravo said:
after flashing many csc (there is no for my country for 950U) it stucks in bootloop
I have no boot animation but there is sprint OMADM notification now
Click to expand...
Click to collapse
factory reset the phone.
idrissbravo said:
i've checked my phone is "clean status" is not black listed it was working normally.
G950U1 ? U1 bit 6 firmware i will search to try thanks
Click to expand...
Click to collapse
youdoofus said:
since you would be technically changing carrier information with the Odin flash, yes, it should fail in stock Odin. But it will work in modded Odin.
---------- Post added at 03:07 PM ---------- Previous post was at 03:05 PM ----------
factory reset the phone.
Click to expand...
Click to collapse
i downloaded the U1 6 firmware csc:xaa . I used the modded odin (odin 3b) i ve made a factory reset i tried to reflash csc the modded odin fails
Still bootloop
idrissbravo said:
i downloaded the U1 6 firmware csc:xaa . I used the modded odin (odin 3b) i ve made a factory reset i tried to reflash csc the modded odin fails
Still bootloop
Click to expand...
Click to collapse
try another cable, reboot your machine, get a new fresh download (dont go directly to sammobile.cim to get it, get the Frija tool or Samfirm, they take literally 1/5th the time to download the firmware sets), try a different computer, uninstall the drivers and let windows reinstall them when you connect your phone, is ADB installed system wide? if not, there is a small tool to do it for you
youdoofus said:
try another cable, reboot your machine, get a new fresh download (dont go directly to sammobile.cim to get it, get the Frija tool or Samfirm, they take literally 1/5th the time to download the firmware sets), try a different computer, uninstall the drivers and let windows reinstall them when you connect your phone, is ADB installed system wide? if not, there is a small tool to do it for you
Click to expand...
Click to collapse
NO THING of those done . i think erase NAND and re-input SN (that i didn't found) , IMEI and information (prod name, device type...) the repairer made a catastrophe. i installed phone info i can't imagin what i found all information are false.
can i set to zero and re-inter the information ?
idrissbravo said:
NO THING of those done . i think erase NAND and re-input SN (that i didn't found) , IMEI and information (prod name, device type...) the repairer made a catastrophe. i installed phone info i can't imagin what i found all information are false.
can i set to zero and re-inter the information ?
Click to expand...
Click to collapse
IMEI changing and that kind of stuff is sketchy. Can they reflash it for you?
youdoofus said:
IMEI changing and that kind of stuff is sketchy. Can they reflash it for you?
Click to expand...
Click to collapse
how those "they" we haven't samsung service , we have just some stores that sell phones and they can "repair" them
they says to me that they don't knows about american samsung (something that i love because of snapdragon)
thank you for all your effort to help me
Nand erase does not wipe IMEI.
And rewriting isn't discussed on XDA
idrissbravo said:
how those "they" we haven't samsung service , we have just some stores that sell phones and they can "repair" them
they says to me that they don't knows about american samsung (something that i love because of snapdragon)
thank you for all your effort to help me
Click to expand...
Click to collapse
the "they" is the repair shop you had work on it. its hard to know how to un-do what they did if we dont know what they did
i also cant imagine a repair shop that can work on Exynos S9s competently but not snapdragon ones

Categories

Resources