Hi Everyone,
So recently i decided to install CortexRom2.1.0 and well i wasn't satisfied with the bluetooth streamin cutting in and out every 5 sec while listening to music so i decided i would Unroot and flash stock 7.0. I connected my phone to my pc running windows 10 pro and to my surprise it would not recognize my phone at all. so i read the thread about getting the adb.key renaming it still nothing i tried on a different windows 10 machine and same thing? any ideas what could it be? when i connect it to Nexus root toolkit it doesn't see it either.
babyboy8100 said:
Hi Everyone,
So recently i decided to install CortexRom2.1.0 and well i wasn't satisfied with the bluetooth streamin cutting in and out every 5 sec while listening to music so i decided i would Unroot and flash stock 7.0. I connected my phone to my pc running windows 10 pro and to my surprise it would not recognize my phone at all. so i read the thread about getting the adb.key renaming it still nothing i tried on a different windows 10 machine and same thing? any ideas what could it be? when i connect it to Nexus root toolkit it doesn't see it either.
Click to expand...
Click to collapse
It's must likely because you're phone is being confused for a pixel. I had same issue. All I did was flash latest nitrogen, went back into adb, and recognized just fine
Related
Hi there.
I had Focus 1.3 with official at&t windows phone 7
After I tried to install MAGLDR, it became a brick((
Now it doesn't respond to any keystrokes, charging, or connecting to PC..
Can I do something with my phone without jtag?
I have one more Focus 1.3, WORKING
If the second one could help to restore first, it will be beautiful.
follower90 said:
Hi there.
I had Focus 1.3 with official at&t windows phone 7
After I tried to install MAGLDR, it became a brick((
Now it doesn't respond to any keystrokes, charging, or connecting to PC..
Can I do something with my phone without jtag?
Click to expand...
Click to collapse
Even I had my FOCUS bricked yesterday but brought it back to life using WP7 Downloader.
When I had plugged it into PC, I checked device manager and luckily it showed up there So i followed this Youtube video(http://www.youtube.com/watch?v=YJVo68x5DDQ) and flashed an ATT Rom and it started working :good:
I am not so lucky((
follower90 said:
I am not so lucky((
Click to expand...
Click to collapse
Try it in different USB ports. I'm sure that it will show up in the device manager. While using WIN7, when an external device is detected it makes a small sound that is your hint that it has been detected actually this sound from windows was the very thing that prompted me to check Device manager
Hi All
I have developed a problem with my Nexus 7 which I have been trying to sort for a bit and don't seem to be getting anywhere. Here is a bit of back ground, sorry it is so long!
I have a Nexus 7 (2012) which while using decided to shut down and will no longer boot up, it got stuck in a boot loop. It is not USB debugged or had any custom recovery on it. I have however managed to get the bootloader unlocked.
I tried to restore it manually following the guide on here but I could not get it to recognise the device despite following every step carefully. The computer (running on Windows 7) sees the Nexus now as it didn't when it first crashed. I have downloaded WugFresh 1.9.9 and tried to restore it from there and it looks like it is working but it now gets stuck on writing system. It does everything to this point fine. I have tried different USB ports, cables and someone else tried it on a different computer (running Windows XP) and he got stuck at the same point.
Can anyone suggest anything else I can do to try and restore my Nexus as I'm at a bit of a loss as to what to do next.
Thanks in advance
Vaughan
My phone was updated to 5.1 a week ago. Its stock not rooted. I was watching netflix and it got stuck so I pressed power button 10-15 seconds to turn it off. Tried to turn it on and now it only boots into bootloader .Blank screen if I try to open recovery. I am using windows 8.1 ,tried to install universal naked drivers and Skipsoft unified android toolkit but still my computer does not detect my phone. So I cannot do anything without my pc detecting my phone. Please help!.
nilay4232 said:
My phone was updated to 5.1 a week ago. Its stock not rooted. I was watching netflix and it got stuck so I pressed power button 10-15 seconds to turn it off. Tried to turn it on and now it only boots into bootloader .Blank screen if I try to open recovery. I am using windows 8.1 ,tried to install universal naked drivers and Skipsoft unified android toolkit but still my computer does not detect my phone. So I cannot do anything without my pc detecting my phone. Please help!.
Click to expand...
Click to collapse
Does your PC even detect that you plugged in your phone? A notification sound?
Flash Me Dead said:
Does your PC even detect that you plugged in your phone? A notification sound?
Click to expand...
Click to collapse
not it doesn't not, not even a sound, i tried to connect to a different pc also no help.
nilay4232 said:
not it doesn't not, not even a sound, i tried to connect to a different pc also no help.
Click to expand...
Click to collapse
Is that also running Windows 8.1? I don't have experience with 8.1 but I've heard it causes problems detecting devices. Try Windows 7, if it still doesn't pick up a sound, check your USB drivers under Device Manager. Make sure 'Google Nexus ADB is listed.'
Flash Me Dead said:
Is that also running Windows 8.1? I don't have experience with 8.1 but I've heard it causes problems detecting devices. Try Windows 7, if it still doesn't pick up a sound, check your USB drivers under Device Manager. Make sure 'Google Nexus ADB is listed.'
Click to expand...
Click to collapse
I tried it with windows 7 too , no sound or whatsoever. I am guessing internal sd card is dead or something.
nilay4232 said:
I tried it with windows 7 too , no sound or whatsoever. I am guessing internal sd card is dead or something.
Click to expand...
Click to collapse
I'm assuming you are on stock ROM with locked bootloader? It's possible when you manually powered down your phone it corrupted your ROM and recovery along with it.
This is a long shot but try to uninstall skipsoft and naked drivers. Install Android SDK. Have a read through this http://wiki.cyanogenmod.org/w/Doc:_fastboot_intro. If you can get fastboot to register then your phone may be saved yet. Or if you already tried all this and it still doesn't work then there's nothing more I can assist you with. Good luck.
FMD
Flash Me Dead said:
Is that also running Windows 8.1? I don't have experience with 8.1 but I've heard it causes problems detecting devices. Try Windows 7, if it still doesn't pick up a sound, check your USB drivers under Device Manager. Make sure 'Google Nexus ADB is listed.'
Click to expand...
Click to collapse
Just FYI, on Windows 8.1, the issue you heard about had to do with MS pushing an Asus Generic USB Driver update which was the cause of the issue. Here is the fix: http://www.eightforums.com/drivers-...usb-issue-since-last-windows-8-1-updates.html
Hello friends! I have put myself between a rock and a hard place.. I bought an n7 to put in my vehicle and was in the process of flashing over autodroid.. Well I had it all setup, windows and nexus tool kit saw the device. I started the flash and the cable was unplugged.. now the device goes right to fastboot menu but windows doesnt recognize it like before. It appears as an unrecognized device. Ive tried everything to force windows to install the drivers and nothing. Any help??
Hi all,
My nexus 6p is not recognized by any PC since I flashed Resurrection Remix 6.1.0 [8.1.0_r33 Oreo] 5 months ago. I have been busy and never bothered about that. Recently I tried to flash StatixOS 9.0 and got stuck at the boot logo. I thought of going back to stock rom by using fastboot and wiped the memory. Now fastboot and ADB doesn´t recognize my phone and I am stuck with no OS and no option to flash one.
Previously I used my laptop several times to fastboot flash roms to my phone and it worked flawlessly, I have installed drivers again, used different PCs, swapped cables, USB OTG, tried Wugfresh, SDK manager drivers/manual drivers installation but none worked. PC doesn't even recognizes in other devices or anywhere in device manager.
Any possible solution? It does charge without any issues. Since flashing RR 6-1-0 it never even showed which type of connection I want (charging only/ MTP/ etc).... is this a software issue ?? what am I missing something here? or the daughter board needs to be replaced??
I have been through every possible threads in and outta XDA but no luck trying those tricks.....
TIA