I have a sm-n900w8, I have sucessfully rooted it and flased a recovery, but everytime i try to boot into twrp it says seandroid blah blah and then resets, this keeps happening over and over until i remove the battery and boot into download mode and flash the recovery again at which time i am able to restart normally. what am i doing wrong? why wont it boot to twrp? Any help would be greatly appriciated, thank you.
buckfity6 said:
I have a sm-n900w8, I have sucessfully rooted it and flased a recovery, but everytime i try to boot into twrp it says seandroid blah blah and then resets, this keeps happening over and over until i remove the battery and boot into download mode and flash the recovery again at which time i am able to restart normally. what am i doing wrong? why wont it boot to twrp? Any help would be greatly appriciated, thank you.
Click to expand...
Click to collapse
Hello,
Can you please post the full error?
Regards
Vatsal,
Forum Moderator.
Vatsal said:
Hello,
Can you please post the full error?
Regards
Vatsal,
Forum Moderator.
Click to expand...
Click to collapse
it says
Recovery booting
recovery is not seandroid enforcing
set warrenty bit: recovery
then it just reboots without entering twrp, thast if i hold volume up, home and power when the device is on and it restarts.
when i hold all tree from power off it just says the same but will just reset and keep looping the same thing.
thank you for your help, i realy am interested in trying different roms, such fun!
buckfity6 said:
it says
Recovery booting
recovery is not seandroid enforcing
set warrenty bit: recovery
then it just reboots without entering twrp, thast if i hold volume up, home and power when the device is on and it restarts.
when i hold all tree from power off it just says the same but will just reset and keep looping the same thing.
thank you for your help, i realy am interested in trying different roms, such fun!
Click to expand...
Click to collapse
Hello,
Are you sure you flashed the correct version of the recovery for your device?
Regards
Vatsal,
Forum Moderator.
i have tried a few different ones
buckfity6 said:
it says
Recovery booting
recovery is not seandroid enforcing
set warrenty bit: recovery
then it just reboots without entering twrp, thast if i hold volume up, home and power when the device is on and it restarts.
when i hold all tree from power off it just says the same but will just reset and keep looping the same thing.
thank you for your help, i realy am interested in trying different roms, such fun!
Click to expand...
Click to collapse
i have tried several differnt ones that say they are for sm-n900w8
buckfity6 said:
i have tried several differnt ones that say they are for sm-n900w8
Click to expand...
Click to collapse
i have tried everything, tried different recoveries, i tried re installing stock firmware and rooted with kingo root, successfully! but cannot in any way seem to successfully get a recovery to take, i hate to give up but i have been trying for like 5 days to do this... getting very discoraged, i have read so many things on here and do it exactly as posted but still no luck.. top top it all off now i have no menu or return buttons.
Start at the beginning .
What model do you have >> Boot to download mode and check the model number .
This reads as wrong model recovery flashed .
How did you Flash TWRP tar or zip .
What TWRP is it .
thank you
JJEgan said:
Start at the beginning .
What model do you have >> Boot to download mode and check the model number .
This reads as wrong model recovery flashed .
How did you Flash TWRP tar or zip .
What TWRP is it .
Click to expand...
Click to collapse
The download screen is as follows:
ODIN MODE
PRODUCT NAME: SM-N900W8
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK: OFF
KNOX WARRENTY VOID: 0X1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A2, A3, P2
SECURE DOWNLOAD: ENABLE
UDC START
I flashed openrecovery-twrp.2.6.3.3 htlecan also n900w8-cwm-recovery-6.0.4.4 (1025)
thank you for your time.
Try Philz Recovery .
Sent from my SM-N930F using XDA-Developers mobile app
You're flashing this version of twrp: https://dl.twrp.me/hltecan/ ?
audit13 said:
You're flashing this version of twrp: https://dl.twrp.me/hltecan/ ?
Click to expand...
Click to collapse
got it falshed sucessfully and installed darklord note 7 rom, only problem now is that i have no sim detected????
The phone is running the latest bootloader and modem? Maybe the phone needs a custom kernel?
Related
Hey fellas,
This is my 1st time trying to root a phone, please forgive my total ignorance
I am having an impossible time rooting my galaxy note 3
SM-N9006 (Chinese)
Android ver: 4.4.2
baseband: N9006ZCUEND1
I tried several methods, mainly ODIN with " n9006-cwm-recovery-6.0.3.7(0922)-fix-adb"
the problem is that every time I have to reboot the phone in recovery mode, I get:
RECOVERY BOOTING (in blue),
RECOVERY IS NOT SEANDROID ENFORCING (red)
Set Warranty Bit: recovery (yellow)
and it bootloops till that. ( root de la vega, kingo, ODIN, etc... same problem, grrrr!)
I am guessing that's because I am using the wrong firmware to flash my phone
I just want to install Google play store ( Chinese note 3 blocked it, some bull****!!!!) and customize my phone
any suggestion?
luv u guys, keep up the good work
EDIT : It's works ! Just use the SM-N9505 CF-Root :
http://download.chainfire.eu/352/CF-Root1/CF-Auto-Root-hlte-hltexx-smn9005.zip
I have the same problem. Impossible to root my Galaxy Note 3 (SM-N9006). If I try to root my phone with Odin, I have bootloops.
In the download mode I have :
ODIN MODE
PRODUCT NAME: SM-N9006
CURRENT BINARY: Custom
SYSTEM STATUS: Official
REACTIVATION LOCK(KK): OFF
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
WRITE PROTECTION: Enable
WDC START
Nobody can help us? Thanks.
Did you?
Did you finally fix your problem? I got the same problem now, dunno what to do next
goukison said:
Hey fellas,
This is my 1st time trying to root a phone, please forgive my total ignorance
I am having an impossible time rooting my galaxy note 3
SM-N9006 (Chinese)
Android ver: 4.4.2
baseband: N9006ZCUEND1
I tried several methods, mainly ODIN with " n9006-cwm-recovery-6.0.3.7(0922)-fix-adb"
the problem is that every time I have to reboot the phone in recovery mode, I get:
RECOVERY BOOTING (in blue),
RECOVERY IS NOT SEANDROID ENFORCING (red)
Set Warranty Bit: recovery (yellow)
and it bootloops till that. ( root de la vega, kingo, ODIN, etc... same problem, grrrr!)
I am guessing that's because I am using the wrong firmware to flash my phone
I just want to install Google play store ( Chinese note 3 blocked it, some bull****!!!!) and customize my phone
any suggestion?
luv u guys, keep up the good work
Click to expand...
Click to collapse
sikching said:
Did you finally fix your problem? I got the same problem now, dunno what to do next
Click to expand...
Click to collapse
I have a SM-N9006 and I got the same problem.
Try the CF-Auto-Root for SM-N9005 (http://download.chainfire.eu/352/CF-Root1/CF-Auto-Root-hlte-hltexx-smn9005.zip), it works for me.
still cannot
but the phone keep entering the boot loop, I cannot enter the root mode or any other mode
it enter into boot loop one the battery is put
did u got same problem?
Thanks
mick39 said:
I have a SM-N9006 and I got the same problem.
Try the CF-Auto-Root for SM-N9005, it works for me.
Click to expand...
Click to collapse
mick39 said:
I have a SM-N9006 and I got the same problem.
Try the CF-Auto-Root for SM-N9005 (http://download.chainfire.eu/352/CF-Root1/CF-Auto-Root-hlte-hltexx-smn9005.zip), it works for me.
Click to expand...
Click to collapse
It's work for me too.
goukison said:
Hey fellas,
This is my 1st time trying to root a phone, please forgive my total ignorance
I am having an impossible time rooting my galaxy note 3
SM-N9006 (Chinese)
Android ver: 4.4.2
baseband: N9006ZCUEND1
I tried several methods, mainly ODIN with " n9006-cwm-recovery-6.0.3.7(0922)-fix-adb"
the problem is that every time I have to reboot the phone in recovery mode, I get:
RECOVERY BOOTING (in blue),
RECOVERY IS NOT SEANDROID ENFORCING (red)
Set Warranty Bit: recovery (yellow)
and it bootloops till that. ( root de la vega, kingo, ODIN, etc... same problem, grrrr!)
I am guessing that's because I am using the wrong firmware to flash my phone
I just want to install Google play store ( Chinese note 3 blocked it, some bull****!!!!) and customize my phone
any suggestion?
luv u guys, keep up the good work
Click to expand...
Click to collapse
I had the same problem with 9005
Used CF Auto root via Odin
and had the problem you described
Pulled and replaced battery
Rebooted to download( Power,Volume Down and Home then volume up)
Flashed custom recovery via odin
Rebooted phone
Now rooted with custom recovery and all worked fine.
Copied custom ROM to SD card
Rebooted to custom recovery
Flashed Custom ROM and all working fine.
Hi,
I flashed several recoveries on my S5.
When I try to boot into the recovery (either with VolUp+Home+Power or with adb reboot recovery),
on the top left corner 3 lines are show with:
RECOVERY BOOTING
Recovery is NOT SEANDROID ENFORCING
Set Warrenty Bit : recovery
and the logo.
After 5-10 seconds it continues to a black screen and I have to disconnect the usb cable and the batterie to turn it of.
I tried This but it didn't help.
The option mentioned in This video was also disabled.
I tried the following recoveries, non of them worked, all with the same error as above, some of them even throw me right back into download mode:
CF-Auto-Root-hlte-hltexx-smn9005.tar
CF-Auto-Root-klte-kltexx-smg900f
CF-Auto-Root-klte-kltedx-smg900f
openrecovery-twrp-2.8.5.0-gt-klte
openrecovery-twrp-2.8.4.0-klte
openrecovery-twrp-2.8.1.0-klte
k3gxx
philz_touch_6.57.8-klte.tar
openrecovery-twrp-2.7.0.0-klte
philz_touch_6.26.2-klte.tar
As for my OS, it's stock with the following details:
Modellnr: SM-G900F
Android-Version: 5.0
Basisbandversion: G900FXXU1BOE5
Kernel-Version: 3.4.0-4920185
[email protected] #1
Buildnumber: LRX21T.G900FXXU1BOE5
SE for Android Status:
Enforcing
SEPF_SM-G900F_5.0_0027
KNOX-Version:
KNOX 2.3
Thank you in advance
Try flashing TWRP 2.8.7.0 with ODIN
Ty ty ty ty ty ty
*Detection* said:
Try flashing TWRP 2.8.7.0 with ODIN
Click to expand...
Click to collapse
Your are my hero! :highfive:
That worked.
I used a version from here:
hxxps://dl.twrp.me/klte/
Nice one
Please delete, replied rather than create new
I just bought an S5 today just for flashing custom roms and it still running on stock 4.4.2. I tried rooting it by Odin and CF-auto root file and it said PASS. But then my phone stuck in the Samsung GALAXY S5 screen with RECOVERY BOOTING in blue , RECOVERY IS NOT SEANDROID ENFORCING in red and Set Warranty Bit : recovery in yellow. Whenever I try to to boot to download mode , recovery mode, or normal boot , it shows the same. Any solution? Thank you:crying:
Read my friend. If it wasn't correct carrier . You possibly flashed the wrong root method. It's fixable . Just read through the correct forums the answers are there
Sent from my SM-G900F using XDA-Developers mobile app
just found out download mode is working , and everything become easy now , thanks a lot!
Hello, this is my first post.
Introduction
So today & yesterday I tried rooting my stock ROM, Android M 6.0.1 G900F Galaxy S5 but I've had a few problems with it.
Details
I think I've done everything correctly to try to flash TWRP onto my phone:
Downloading the lastest version of TWRP-klte (I've used 3.0.2-1 & 3.0.2-2)
Unticking 'Auto-Reboot' in Odin (I've used Odin3_v3.09 & Odin3_v3.10.6)
Pull out the battery to get out of download mode, etc.
But nothing seems to work. When I go into download mode it tells me:
Code:
[B][COLOR="Red"]ODIN MODE[/COLOR]
[COLOR="Black"]PRODUCT NAME: SM-G900F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x0[/COLOR]
[COLOR="DimGray"]QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1[/COLOR]
[COLOR="Blue"]SECURE DOWNLOAD: ENABLE[/COLOR]
[COLOR="Red"]UDC START[/COLOR]
[/B]
To my understanding I find it weird that it says my Current Binary and my System Status say 'Custom' but my KNOX is still 0x0.
Now, of course before I tried to flash TWRP it said I my Current Binary and my System Status said 'Official'.
What I Think Is The Problem
Correct me if I'm wrong but I think the problem is that UDC START part in the download mode.
I've read online that some people get that when their phone is in a bootloop but I have no problem with my phone.
Conclusion
In conclusion I think that the problem may be resolved by factory restoring my phone, but if you have any other ideas, please reply to this thread.
Thanks.
None of those steps would root your phone though
TWRP is a custom recovery, once you've flashed that, you need to boot into TWRP, and flash SuperSU 2.xx beta (xx = whichever is the latest version)
Then you can reboot into Android and should be rooted
*Detection* said:
None of those steps would root your phone though
TWRP is a custom recovery, once you've flashed that, you need to boot into TWRP, and flash SuperSU 2.xx beta (xx = whichever is the latest version)
Then you can reboot into Android and should be rooted
Click to expand...
Click to collapse
The problem is that it won't let me flash TWRP. I have SuperSU on my device ready to be flashed but I need to get TWRP working.
Ah I see, and you are booting straight into recovery after replacing the battery?
1. Disable auto reboot & Flash TWRP
2. Disconnect USB & Pull battery to power off once flash is complete
3. Replace battery and boot immediately into TWRP
TWRP 3.0.2.0 Klte is the version I use
*Detection* said:
Ah I see, and you are booting straight into recovery after replacing the battery?
1. Disable auto reboot & Flash TWRP
2. Disconnect USB & Pull battery to power off once flash is complete
3. Replace battery and boot immediately into TWRP
TWRP 3.0.2.0 Klte is the version I use
Click to expand...
Click to collapse
Yes I booted once into recovery straight after flashing and it never worked.
Now I have to use ADB because it's a bit finicky and it wont always boot into recovery by doing Volume Up + Power.
I'll try using 3.0.2.0 and see what happens.
Edit: I just tried with Odin 3.09 & TWRP klte 3.0.2.0, still no luck. Also couldn't boot into recovery with buttons, had to use Volume Up + Power.
-removed
So, I tried flashing the recovery mode with the files from a tutorial, supposedly for this exact model
Aaaand it totally didn't work, my device didn't brick but I cannot enter recovery mode, it just says:
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery (0)
Aside of that, I can use it normally, but I can't seem to be able to root it without flashing.
What happens?
MxdMod said:
tried flashing the recovery mode for this exact model
What happens?
Click to expand...
Click to collapse
no recovery has been posted for g532 variants yet so u flashed wrong recovery thats why u'r recovery is stuck at that. download u'r official firmware and flash to solve the prblm that has arisen
root: http://forum.xda-developers.com/android/development/root-samsung-galaxy-j2-prime-g532m-t3523090
If you dont find twrp you can use flashfire after root :good: