Related
Hi,
I'm on a stock EU firmware MPD24.65-18. I've installed TWRP and am rooted. My phone is informing me of an OTA update to 6.0.1 firmware 24.61.52.en.EU which I haven't yet done anything with.
I was going to use RSD Lite to update having downloaded the EU version of 6.0.1, but my phone isn't recognised. I'm on Windows 10, 64bit. I've tried various cables in USB2 and USB3 ports - no luck with any combinations. However, my phone does show up in adb.
So, what's my best solution going forward?
I'm thinking I should unroot and flash the stock recovery, take the OTA update then flash TWRP and re-root.
Any advice gratefully received.
huntk1 said:
Hi,
I'm on a stock EU firmware MPD24.65-18. I've installed TWRP and am rooted. My phone is informing me of an OTA update to 6.0.1 firmware 24.61.52.en.EU which I haven't yet done anything with.
I was going to use RSD Lite to update having downloaded the EU version of 6.0.1, but my phone isn't recognised. I'm on Windows 10, 64bit. I've tried various cables in USB2 and USB3 ports - no luck with any combinations. However, my phone does show up in adb.
So, what's my best solution going forward?
I'm thinking I should unroot and flash the stock recovery, take the OTA update then flash TWRP and re-root.
Any advice gratefully received.
Click to expand...
Click to collapse
you have to remove root and twrp recovery first. Stock roms can't be installed on custom recoveries. Then install "motorola device manager", it should help you
bilbo75 said:
you have to remove root and twrp recovery first. Stock roms can't be installed on custom recoveries. Then install "motorola device manager", it should help you
Click to expand...
Click to collapse
I unrooted and installed the stock 6.0 recovery. Accepted the OTA update and it failed with 'Error!' after downloading and rebooting into the Bootloader. The phone is still working but it's still on 6.0.
Any ideas?
huntk1 said:
I unrooted and installed the stock 6.0 recovery. Accepted the OTA update and it failed with 'Error!' after downloading and rebooting into the Bootloader. The phone is still working but it's still on 6.0.
Any ideas?
Click to expand...
Click to collapse
If you can, try to flash manually with fastboot the 6.0.1 rom. I did it and it's easy, just a bit boring
I will try that next. Which guide did you follow?
huntk1 said:
I will try that next. Which guide did you follow?
Click to expand...
Click to collapse
This one : http://forum.xda-developers.com/moto-x-play/general/guide-how-to-flash-factory-image-return-t3261486
I tried to install Xposed but something went wrong and my P9 lite now continues bootlooping
how can i restore it?
from eRecovery it doesn't work...
eRecovery?
You need TWRP to install Xposed so... I assume you do have TWRP?
Then just restore your backup. I do hope you have a backup!
If not, make a wipe and flash a stock firmware. You can find links here in the forum.
Always make a backup of your working system when you flash stuff.
A bootloop from installing Xposed is not normal! I assume you have flashed a wrong version.
Keep in mind that it takes a long time for the first boot after installing Xposed so it might not even be a bootloop.
Schlengge said:
eRecovery?
You need TWRP to install Xposed so... I assume you do have TWRP?
Then just restore your backup. I do hope you have a backup!
If not, make a wipe and flash a stock firmware. You can find links here in the forum.
Always make a backup of your working system when you flash stuff.
A bootloop from installing Xposed is not normal! I assume you have flashed a wrong version.
Keep in mind that it takes a long time for the first boot after installing Xposed so it might not even be a bootloop.
Click to expand...
Click to collapse
can you link me the stock recovery? for VNS-L31
how i have to flash it now?
You can find links to the newest firmwares here:
http://forum.xda-developers.com/huawei-p9lite/development/stock-firmware-links-t3468245
The links provide you with a flashable zip file that can be flashed through TWRP.
Schlengge said:
You can find links to the newest firmwares here:
http://forum.xda-developers.com/huawei-p9lite/development/stock-firmware-links-t3468245
The links provide you with a flashable zip file that can be flashed through TWRP.
Click to expand...
Click to collapse
i can't access to twrp mode... can i install it via erecovery?
diorenzo said:
i can't access to twrp mode... can i install it via erecovery?
Click to expand...
Click to collapse
No. You need to find a way to install TWRP first.
But how did you flash Xposed when you don't have TWRP?
Or how did you lose TWRP access? I can't really see how you do not have TWRP...
i have twrp but sometimes it access to it and sometimes no
diorenzo said:
i have twrp but sometimes it access to it and sometimes no
Click to expand...
Click to collapse
download xposed uninstall, boot to twrp with power off+volume up when the device is shut down... and then flash the xposed uninstaller...i got that bootloop too and fixed it in 2 min
snapdesign said:
download xposed uninstall, boot to twrp with power off+volume up when the device is shut down... and then flash the xposed uninstaller...i got that bootloop too and fixed it in 2 min
Click to expand...
Click to collapse
i can't access to twrp mode, befor I could, now i don't know what to do
is there a method using adb?
diorenzo said:
i can't access to twrp mode, befor I could, now i don't know what to do
is there a method using adb?
Click to expand...
Click to collapse
you can do it with fastboot... flash the twrp img
i haven't access to my twrp
i haven't access to my twrp anymore
when it's shut down i pressed power off + v up + v down and iy says installing update but at 5% it stops
Try to reinstall TWRP using fastboot.
There are guides in here how to do that. I'm on mobile right now so can't really search the links.
But you installed TWRP before so just try to do it again but do it in fastboot mode. You should be able to still access this.
If you want to return to stock download a full firmware and extract it using huawei firmware extractor or similar. Then you can use fastboot to flash boot.img, cust.img, system.img and both of the recoveries. This only applies if you have the boot loader unlocked.
If it stops at 5% the oeminfo may not match the firmware you are trying to flash (at least it was my problem). You can also flash the correct oeminfo partition through fastboot (oeminfo files are available just search).
Edit: And I agree with what Schlengge as posted. You should still be able to flash twrp trough the fastboot mode.
Hello.
I'm stuck on here since 2 PM of yesterday and I can't figure out the mess I made.
So today I tryed on removing brand Vodafone (italian), and i did make it but i ended up with C900 and couldn't log with google, i tried installing oeminfos but i got the one from P9 (not lite) and it bricked my phone and it was stuck at booting sayng my datas were unable to load and suggests me a factory reset (lowleve) which the system made from itself.
Now I flashed the userdata and it worked, now the phone boot but Model number says hi625 and serial lacks of L31.. i mean it is VNS-C432B130..
Someone knows hot to help me?
i think its the same of balong version in p8 lite.
Thanks Everybody.
fiumef said:
Hello.
I'm stuck on here since 2 PM of yesterday and I can't figure out the mess I made.
So today I tryed on removing brand Vodafone (italian), and i did make it but i ended up with C900 and couldn't log with google, i tried installing oeminfos but i got the one from P9 (not lite) and it bricked my phone and it was stuck at booting sayng my datas were unable to load and suggests me a factory reset (lowleve) which the system made from itself.
Now I flashed the userdata and it worked, now the phone boot but Model number says hi625 and serial lacks of L31.. i mean it is VNS-C432B130..
Someone knows hot to help me?
i think its the same of balong version in p8 lite.
Thanks Everybody.
Click to expand...
Click to collapse
If you have unlocked the bootloader I would suggest flashing all the important images manually using fastboot (cust + cache + system + boot + recovery + recovery2). Also before rebooting flash the oeminfo (the C432 p9 lite one, either dual or single sim) file using fastboot (do NOT flash a zip file trough fastboot).
After doing this try to flash using erecovery combo (+ and - button combo) and do a factory reset. In my case that fixed it.
Edit: Since you want to debrand I would suggest using the VNS-L31C432B151 firmware.
flash the twrp img with fastboot, then sideload the xposed uninstall zip
I download the packacke via OTA and restart device. Then it boots to TWRP. I have to reboot device again and it goes back 6.0.1 with failed update notification. My deivice is unroot and still lock bootloader. Is there anyone having the same issue with me? And possible way to fix?
Thanks
Thalias said:
I download the packacke via OTA and restart device. Then it boots to TWRP. I have to reboot device again and it goes back 6.0.1 with failed update notification. My deivice is unroot and still lock bootloader. Is there anyone having the same issue with me? And possible way to fix?
Thanks
Click to expand...
Click to collapse
You have to restore stock B29 recovery. You can't accept an OTA with TWRP.
bkores said:
You have to restore stock B29 recovery. You can't accept an OTA with TWRP.
Click to expand...
Click to collapse
Thanks. I am downloading again. Hope it works this time.
bkores said:
You have to restore stock B29 recovery. You can't accept an OTA with TWRP.
Click to expand...
Click to collapse
It still fails. After restarting device it boots into installing screen with miFavor logo instead of TWRP. The processing bar runs to about 24% then stops to reboot. I notice that the log at bottom screen say mismatch. And I got message system update package does not match the phone.
Thalias said:
It still fails. After restarting device it boots into installing screen with miFavor logo instead of TWRP. The processing bar runs to about 24% then stops to reboot. I notice that the log at bottom screen say mismatch. And I got message system update package does not match the phone.
Click to expand...
Click to collapse
You modified /system . You should probably flash official b29 firmware from ZTE and then update to nougat
Teet1 said:
You modified /system . You should probably flash official b29 firmware from ZTE and then update to nougat
Click to expand...
Click to collapse
I got b29 from zte website. Can I install it with stock recovery?
Thalias said:
Is there a link to download it?
Click to expand...
Click to collapse
https://www.zteusa.com/axon-7
Go under Support<Software Updates.
bkores said:
https://www.zteusa.com/axon-7
Go under Support<Software Updates.
Click to expand...
Click to collapse
Can I install it with stock recovery?
Thalias said:
Can I install it with stock recovery?
Click to expand...
Click to collapse
You have to install it in stock recovery. Put it on your FAT32 sdcard and then in stock recovery select "Apply update from sdcard".
bkores said:
You have to install it in stock recovery. Put it on your FAT32 sdcard and then in stock recovery select "Apply update from sdcard".
Click to expand...
Click to collapse
I got following message at bottom left of screen
Supported API: 3
Sorry, you can't sd upgrade
I think you have to enable OEM unlock in developer options, first. Then, you can install B29 via SDCard.
MiMtnBiker said:
I think you have to enable OEM unlock in developer options, first. Then, you can install B29 via SDCard.
Click to expand...
Click to collapse
Thanks. I forgot to unzip the file and put it in the root of sd card and I have done what you said too. It is running installation now.
I'm failing now? I went from ZAD v.3 back to stock B29 (I have an unlocked bootloader). I do have the MiFavor recovery (not TWRP)
I got the notification there was an upgrade, it took 6 hours to download... but the update "failed". I tried applying the update via SD card, but I get about 32% in and says "Update failed"......It also lists "Status 8" and "system partition has unexpected contents".
Sounds like y'all are having a hell of a time between the slow OTA speeds and then getting it to actually flash.
So I think I'll hold off for now. Hopefully we can get some TWRP-flashable zips soon enough... I think DrakenFX is already busy with all that
You guys are making this way too complicated.
The full B29 firmware will flash just fine with twrp.
Only OTA *updates* require the stock recovery. The difference is the update patches existing files while the full firmware contains full partition images.
Be aware if you download the full b29 firmware from zte, it will also replace your recovery and bootloader. You won't be able to flash recovery from the bootloader/fastboot screen then. Also, it wipes all your data.
DrakenFX put out a modified version of the full firmware file which doesn't modify the bootloader. I believe it also leaves the recovery intact.
After flashing official A2017U B29 firmware from ZTE the signal network service is lost. I ignore this and continue to upgrade to Nougat successfully and I get lost signal. I notice that Dual Sim Setting is working. Does official firmware overwrite original chinese baseband/bootstack? Can someone please upload chinese baseband/bootstack A2017 please?
gpz1100 said:
You guys are making this way too complicated.
The full B29 firmware will flash just fine with twrp.
Only OTA *updates* require the stock recovery. The difference is the update patches existing files while the full firmware contains full partition images.
Be aware if you download the full b29 firmware from zte, it will also replace your recovery and bootloader. You won't be able to flash recovery from the bootloader/fastboot screen then. Also, it wipes all your data.
DrakenFX put out a modified version of the full firmware file which doesn't modify the bootloader. I believe it also leaves the recovery intact.
Click to expand...
Click to collapse
No more complicated than it's turned out to be....
I followed DrakenFX's guide to B29 stock... The Nougat OTA downloaded, in 6 hours, but failed. So, I tried the SD card method, and it also failed at 32%.
Not sure what else I can do? Just wait for DrakenFX to make ZAD v.4 is my plan for now since I already wasted about 11 hours trying to upgrade today, and another 3 restoring back 6.0.1 and all my apps.
tele_jas said:
No more complicated than it's turned out to be....
I followed DrakenFX's guide to B29 stock... The Nougat OTA downloaded, in 6 hours, but failed. So, I tried the SD card method, and it also failed at 32%.
Not sure what else I can do? Just wait for DrakenFX to make ZAD v.4 is my plan for now since I already wasted about 11 hours trying to upgrade today, and another 3 restoring back 6.0.1 and all my apps.
Click to expand...
Click to collapse
No problem upgrading using the OTA on an sdcard here. Flashed the draken stock_system zip, then fastboot flashed the B29 stock recovery. Reboot to recovery (which is now stock) and update from sd card. If you've messed with other partitions, you may need to flash more B29 .img's.
Thalias said:
After flashing official A2017U B29 firmware from ZTE the signal network service is lost. I ignore this and continue to upgrade to Nougat successfully and I get lost signal. I notice that Dual Sim Setting is working. Does official firmware overwrite original chinese baseband/bootstack? Can someone please upload chinese baseband/bootstack A2017 please?
Click to expand...
Click to collapse
hey why you flashed us version firmware on chinise version?
i have aslo chinise version of the phone with b09G firmware im afraid loose signal too
yosef019 said:
hey why you flashed us version firmware on chinise version?
i have aslo chinise version of the phone with b09G firmware im afraid loose signal too
Click to expand...
Click to collapse
I don't know Chinese so I prefer Eng community with support and US region always get latest update first.
Hello, im currently on b161 and i want to upgrade to b381, do i just place the update zip to dload on sd card and thats it? Im asking because the site im downloading it from doesnt provide uodate data full for b381 but it does for everything else
you could wait for the ota, you'll get 371 first, and then 381. otherwise, try firmware finder, that should be the easiest way to upgrade.
if you want to use the update.zip you need to flash it through twrp, and the update data full file for the same version as well.
mjz2cool said:
you could wait for the ota, you'll get 371 first, and then 381. otherwise, try firmware finder, that should be the easiest way to upgrade.
if you want to use the update.zip you need to flash it through twrp, and the update data full file for the same version as well.
Click to expand...
Click to collapse
Do i need root or unlocked bootloader for any of these
you won't need to unlock for the ota and firmware finder.
you do have to unlock the bootloader to install twrp. there's a few guides for upgrading to nougat, but you have to follow the instructions closely to prevent bricking the phone.
mjz2cool said:
you won't need to unlock for the ota and firmware finder.
you do have to unlock the bootloader to install twrp. there's a few guides for upgrading to nougat, but you have to follow the instructions closely to prevent bricking the phone.
Click to expand...
Click to collapse
How do you upgrade with ff
vozilo said:
How do you upgrade with ff
Click to expand...
Click to collapse
https://forum.xda-developers.com/hu...android-7-emui-5-0-vns-l-cb360-links-t3565117
i tried updating with ff, but i couldn't get it working so i just unlocked the bootloader and flashed twrp and installed 370, before i went back to 160, and got the official ota to 370 and 380
vozilo said:
How do you upgrade with ff
Click to expand...
Click to collapse
I downloaded update.zip for b370 from my pc an put it on my sd card. What should i do now
Hello,
today i wanted to update my *rooted* WAS-LX1 to B182, so i downloaded the update.zip and tried to flash it with FlashFire.
Then my phone booted in Error Mode. So i tried to boot in Fastboot mode, and it worked. So i flashed TWRP and now i want to install Stock firmware again, but i don't know which file i should flash. I've got 3 files called update.zip, update_data_full_public.zip and update_full_WASL21A_hw_eu.zip.
I hope you can help me.
Zillinda
Zillinda said:
Hello,
today i wanted to update my *rooted* WAS-LX1 to B182, so i downloaded the update.zip and tried to flash it with FlashFire.
Then my phone booted in Error Mode. So i tried to boot in Fastboot mode, and it worked. So i flashed TWRP and now i want to install Stock firmware again, but i don't know which file i should flash. I've got 3 files called update.zip, update_data_full_public.zip and update_full_WASL21A_hw_eu.zip.
I hope you can help me.
Zillinda
Click to expand...
Click to collapse
To update my rooted phone to B182 I had to download the full package (2.3gb, including update.zip and update_full_WASL21A_hw_eu.zip). I was not successfull in updating via TWRP. I updated via the official system menu so I don't know how exactly it was applied. According to other guides (http://www.stechguide.com/tag/was-lx1c432b182/ for example) it should be update.zip first and update_full_WASL21A_hw_eu.zip second, without a reboot. Let us know how it worked out...
garris_bibop said:
To update my rooted phone to B182 I had to download the full package (2.3gb, including update.zip and update_full_WASL21A_hw_eu.zip). I was not successfull in updating via TWRP. I updated via the official system menu so I don't know how exactly it was applied. According to other guides (http://www.stechguide.com/tag/was-lx1c432b182/ for example) it should be update.zip first and update_full_WASL21A_hw_eu.zip second, without a reboot. Let us know how it worked out...
Click to expand...
Click to collapse
Unfortunately it didn't work. The only thing i can do is boot in the TWRP recovery. Is there a way to flash the stock rom with fastboot?
Zillinda said:
Unfortunately it didn't work. The only thing i can do is boot in the TWRP recovery. Is there a way to flash the stock rom with fastboot?
Click to expand...
Click to collapse
I only tried flashing the update via sideload and recovery and it didn't work (http://rootmygalaxy.net/flash-ota-firmware-updates-using-adb-fastboot-commands/). Maybe you are lucky. Problem is, I'm quite new to this stuff, hopefully someone else can help out.
Can someone please provide us with a link for the stock recovery?
kazzot17 said:
Can someone please provide us with a link for the stock recovery?
Click to expand...
Click to collapse
https://mega.nz/#!V3AwUI6K!mcqlNCwcyE71MroUZuP9w-bNDhgt3MGzz0svgHUY8Ow
By the way, i solved the problem. I downloaded HuaweiUpdateExtractor for extracting the .img files from the update.app and i flashed them with fastboot.
Nice, congrats