Every time I play something it works then it cuts off not only that I have to force the master power. I have the we Linux mode set to permissive and it still does the samething.
I'm using cyanogenmod 12.1
This is getting really annoying please help me
louie123456789 said:
I'm using cyanogenmod 12.1
This is getting really annoying please help me
Click to expand...
Click to collapse
when i was abt to flash cm13 i read the cmnts and came to know that many are having issue with viper4androud on cm so i used Viper4ARISE instead and it works perfectly. here is the link:
http://forum.xda-developers.com/and...d-systems-auditory-research-t3379709/page1818
post your result after trying.. :good:
d1v1n3 said:
when i was abt to flash cm13 i read the cmnts and came to know that many are having issue with viper4androud on cm so i used Viper4ARISE instead and it works perfectly. here is the link:
http://forum.xda-developers.com/and...d-systems-auditory-research-t3379709/page1818
post your result after trying.. :good:
Click to expand...
Click to collapse
I am playing a song and it's not processing
louie123456789 said:
I am playing a song and it's not processing
Click to expand...
Click to collapse
why is sampling rate 48000 in u'rs? i see 44100 in mine. did u try disabling and enabling the master switch after playing song? sometimes doing this does the trick
d1v1n3 said:
why is sampling rate 48000 in u'rs? i see 44100 in mine. did u try disabling and enabling the master switch after playing song? sometimes doing this does the trick
Click to expand...
Click to collapse
Its just how my phone is . I did all of that and I still get the same thing. I don't have this problem on my galaxy avant .
I really need this issue fixed
Help
Help me please!
I fixed it thank you
louie123456789 said:
I fixed it thank you
Click to expand...
Click to collapse
happy to know. please share how u fixed, it will be reference for those who may encounter same issue later
d1v1n3 said:
happy to know. please share how u fixed, it will be reference for those who may encounter same issue later
Click to expand...
Click to collapse
I fixed it by downloading this app
Ooo... init.d emulator... but V4A dont't need init.d, except if you're on enforcing selinux
Related
Hey there guys...every rom i tried has good sound through speaker but is awfully loud through earphones!i can't listen to this levels and i must lower it to 60,70% to make the music audible...
This is so annoying,spent the whole night testing roms and every single one(cm7 based) had this problem(atleast for me...?)
Any suggestions??
Cheer's,George
did u try also froyopro? or just looking for CM7?
elderduke said:
did u try also froyopro? or just looking for CM7?
Click to expand...
Click to collapse
Well...gingerbread is what i wanted,so i haven't tried that one...
nfsmw_gr said:
Hey there guys...every rom i tried has good sound through speaker but is awfully loud through earphones!i can't listen to this levels and i must lower it to 60,70% to make the music audible...
This is so annoying,spent the whole night testing roms and every single one(cm7 based) had this problem(atleast for me...?)
Any suggestions??
Cheer's,George
Click to expand...
Click to collapse
try changing audio player with equalizer for another? so the sound is much improved
jose385 said:
try changing audio player with equalizer for another? so the sound is much improved
Click to expand...
Click to collapse
Already tried that,i used stock,poweramp,mixzing all had way too much audio but only on earphones!on speaker everything's great!
Any solution to reduce the earphones audio output?
nfsmw_gr said:
Already tried that,i used stock,poweramp,mixzing all had way too much audio but only on earphones!on speaker everything's great!
Any solution to reduce the earphones audio output?
Click to expand...
Click to collapse
in PowerAMP, equalizer settings and attempt to download everything shown in the picture? down everything, you may find it then I can think of nothing but sorry.
Lol why you need to have it on max volume?!? If 60-70% is good then have it on 60-70%.
Sent from my E15i using xda app-developers app
Anyway guys thank you for helping!
I wiped everything then flashed gingerdx and alfs kernel and everything works great now!
This thread can close mods!
Try gingerDx!
Closed on OP request
Hi. I just wanna ask how to turn off vsync on I9500? I know i will get artifacts effect thing . i just wanna test on quadrant and more benchmarking apps. I search and got build.prop edit. And it doesnt work. Anybody can help?
Yeah, i'm asking this myself. I have a couple of games (arcade roms) that are synced to a different refresh rate and they stutter a bit. I'm thinking temporarily disabling vsync will make them smooth.
Thank you!
edit: i am on a 4.3 custom rom, with Ktoonez kernel.
RaduNastase said:
Yeah, i'm asking this myself. I have a couple of games (arcade roms) that are synced to a different refresh rate and they stutter a bit. I'm thinking temporarily disabling vsync will make them smooth.
Thank you!
edit: i am on a 4.3 custom rom, with Ktoonez kernel.
Click to expand...
Click to collapse
Code:
debug.egl.swapinterval=0
This seems to unlock the FPS limit.
I was able to achieve higher FPS in benchmarks after using that.
So, how do i use this line?
RaduNastase said:
So, how do i use this line?
Click to expand...
Click to collapse
You add it to the build.prop.
Pwnycorn said:
You add it to the build.prop.
Click to expand...
Click to collapse
Thanks man. I'm a bit of a noob, but i'll study the buil.dprop issue. Is there any danger in trying this? Is it safe for the phone?
RaduNastase said:
Thanks man. I'm a bit of a noob, but i'll study the buil.dprop issue. Is there any danger in trying this? Is it safe for the phone?
Click to expand...
Click to collapse
The worst thing that can happen is the phone going into a bootloop.
Well, that's pretty bad... Thanks!
So i have found a very strange bug. After converting a youtube video to mp3 and playing it for a while, the track begins to sound very weird, it gets a cracking, disformed, and a very weird sound. But the weirdest part is, when i go back to Viral lite-app (where i got the URL-link from) and play the original clip it's also distorted!!!!!!!!!!!! I find this veryyy weird and have no logical explanation for it.
So all other tracks and songs are cristal clear but when i convert them to mp3 and play them for a while, they begin to sound like sh*t!!
Has anybody experienced the same?
If i understand your issue, i think that its an app related issue and should be asked/reported in the playstore not here.
Eminemiero said:
If i understand your issue, i think that its an app related issue and should be asked/reported in the playstore not here.
Click to expand...
Click to collapse
NO! I don't think it's Viral lite related issue. Because when i play the video in the official Youtube app, its also distorted!
Thats why i said, i cant seem to find a logical explanation... could it be like a security thing from Youtube to stop people from downloading/converting videos? Or is it a BUG from lollipop?
the baptizer said:
NO! I don't think it's Viral lite related issue. Because when i play the video in the official Youtube app, its also distorted!
Thats why i said, i cant seem to find a logical explanation... could it be like a security thing from Youtube to stop people from downloading/converting videos? Or is it a BUG from lollipop?
Click to expand...
Click to collapse
Are you using stock lollipop? Phone Model? Kernel?
Eminemiero said:
Are you using stock lollipop? Phone Model? Kernel?
Click to expand...
Click to collapse
D802
Cloudy 3.3
Dorimanx 3.9.2
the baptizer said:
D802
Cloudy 3.3
Dorimanx 3.9.2
Click to expand...
Click to collapse
mmm i would try to go back to cloudys kernel. Maybe there is some misconfiguration in dori's.
Did you change something on "Sounds" Tab in dorimanx app?
Yes i changed all the sound gains gains back to 0 when the problems started.. that didnt help... its just soooo weird
Well Yesterday i found this Sound mod XTREMEMusicâ„¢ but i tried many things and roms like CM13 And Pure Nexus It Was not working for me.
So i want to ask from you. Are you using any sound mod that works perfectly on our Nexus 5x
if yes do tell us the name of mod
http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
manpildo said:
http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Click to expand...
Click to collapse
which rom you are using with this mod and its working perfectly?
Also viper4android is still the best.
Using it with dirtyunicorns rom (they have a section for installing instructions).
---------- Post added at 03:29 PM ---------- Previous post was at 03:28 PM ----------
Whoops havent seen the pevius post
nitinvaid said:
which rom you are using with this mod and its working perfectly?
Click to expand...
Click to collapse
Pure Nexus. Working perfectly.
I can't stand sound mods that involve more than one app. Just the other week I found something that looked promising, installed it, and then I had viper/Dolby/some Sony eq app/ and some terminal commands. I hated it. I don't see the point in it. Unless you have a few hundred dollars in any type of sound system, and even then most of the tuning can be done from amps/eq
The most Ill go is viper4android ALONE. and even when I do that, I have to modify my goto interactive governor tweaks to eliminate clipping and distortion when the screen turns off.
noidea24 said:
I can't stand sound mods that involve more than one app. Just the other week I found something that looked promising, installed it, and then I had viper/Dolby/some Sony eq app/ and some terminal commands. I hated it. I don't see the point in it. Unless you have a few hundred dollars in any type of sound system, and even then most of the tuning can be done from amps/eq
The most Ill go is viper4android ALONE. and even when I do that, I have to modify my goto interactive governor tweaks to eliminate clipping and distortion when the screen turns off.
Click to expand...
Click to collapse
Try Arise. You will only need to set up V4A, nothing else. If you experience crackling with it, try sonophilo's setprop instead of the default one (instructions in the thread), it usually eliminates all distortions for me. And the quality on the "Numbers" release is hands down much superior to basic V4A installation (i am using also the optional Atmos add-on, i use it instead of v4a equalizer and it's better imo) .
the ARISE sound mod is working for me... it work mm like stock and pa and also works on android nougat
Arise numbers is the best I've used so far. Much better sound quality than just using V4A or ViperAtmos.
Sent from my Nexus 5X using Tapatalk
noidea24 said:
I can't stand sound mods that involve more than one app. Just the other week I found something that looked promising, installed it, and then I had viper/Dolby/some Sony eq app/ and some terminal commands. I hated it. I don't see the point in it. Unless you have a few hundred dollars in any type of sound system, and even then most of the tuning can be done from amps/eq
The most Ill go is viper4android ALONE. and even when I do that, I have to modify my goto interactive governor tweaks to eliminate clipping and distortion when the screen turns off.
Click to expand...
Click to collapse
i agree with you
i have just flashed this A.R.I.S.E. Sound System mod its working nicely but the Nexus 5X sound chip is not that great if you know what i mean
i have on other hand moto G4+ and by default its sound Quality is great bcoz of its DAC chip
seabro01 said:
Arise numbers is the best I've used so far. Much better sound quality than just using V4A or ViperAtmos.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Is ARISE working on CM13 too? I have tested and used it on Pure Nexus And its Awesome. Just THinking if our device had a much better DAC chip it would blow my earphones
nitinvaid said:
Is ARISE working on CM13 too? I have tested and used it on Pure Nexus And its Awesome. Just THinking if our device had a much better DAC chip it would blow my earphones
Click to expand...
Click to collapse
Should work but not sure since I've just tried Arise with Pure Nexus.
hello, can anybody teach me how to install ARISE step by step? because I flashed V4A on PN with EX kernel and although I didnt have 'driver' issues, the v4a doesnt effect the sound itself. already tried changing values in EQ but no effect.
RonnellTapawan said:
hello, can anybody teach me how to install ARISE step by step? because I flashed V4A on PN with EX kernel and although I didnt have 'driver' issues, the v4a doesnt effect the sound itself. already tried changing values in EQ but no effect.
Click to expand...
Click to collapse
What i did is my Purenexus rom was clean with no sound mod i flashed the ARISE installer in recovery
you will find the download and tutorial here http://www.arisesound.com/
nitinvaid said:
What i did is my Purenexus rom was clean with no sound mod i flashed the ARISE installer in recovery
you will find the download and tutorial here http://www.arisesound.com/
Click to expand...
Click to collapse
ok, so after i set the profile to audiophile 10.0, its done? will report back later, thanks!
edit: what zip did you flash? numbers?
RonnellTapawan said:
ok, so after i set the profile to audiophile 10.0, its done? will report back later, thanks!
edit: what zip did you flash? numbers?
Click to expand...
Click to collapse
the latest one
ARISE+Sound+Systems+Leviticus+1.3.zip
Which rom you are using?
nitinvaid said:
the latest one
ARISE+Sound+Systems+Leviticus+1.3.zip
Which rom you are using?
Click to expand...
Click to collapse
oww, ok, I downloaded Numbers 1.4 lmao ill just downloaded that one im using PureNexus with EX kernel
edit: flashed it, it 100% works right now, thanks! using audiophile 10.0 profile
edit 2: wow, just wow! ive been trying not to install v4a because of laziness! i cant believe what i have missed lmao! :silly:
I just use the
SURROUND SOUND [Mod]
http://forum.xda-developers.com/nexus-5x/themes-apps/mod-surround-sound-testers-t3252659
RonnellTapawan said:
oww, ok, I downloaded Numbers 1.4 lmao ill just downloaded that one im using PureNexus with EX kernel
edit: flashed it, it 100% works right now, thanks! using audiophile 10.0 profile
edit 2: wow, just wow! ive been trying not to install v4a because of laziness! i cant believe what i have missed lmao! :silly:
Click to expand...
Click to collapse
Numbers is the latest version.
Sent from my Nexus 5X using Tapatalk
manpildo said:
http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Click to expand...
Click to collapse
What the hell do I download lol? I read the OP and post 2 twice.. What am I to download? The link points to several folders..
Never mind, read post above me.. hah!
Read The FullThread First
So I was having screen burn issue on my Redmi Note 4 Snapdragon varient and I was really sad to see burn in issues after flashing Resurrection Remix ROM.
Burn in issue didn't happen to me before but after I flashed Custom ROM, I started noticing it.
So then I went to Service Centre and I showed them the issue.. They replaced my LCD Panal.. I was happy and thought I'd not get burn in issue again.. But nope.. It happened again..
Then I started searching for posts about burn in issue.. And finally on this thread https://forum.xda-developers.com/redmi-note-4/help/screen-burn-mido-3-32-tianma-display-t3673540 @muzaffarsyam
posted a fix for this.. So first I thought it was a hardware issue but after trying his solution, I realised that it was actually software issue.. It's Actually Colour Calibration issue..
All You need to do is set the "Colour Calibration" as shown in the attachment and It will fix the issue.. This is tested by me and @muzaffarsyam and so far it's working fine.. He has given me the permission to make a thread for this issue...
All Credit Goes To : @muzaffarsyam
Ripunjoy said:
So I was having screen burn issue on my Redmi Note 4 Snapdragon varient and I was really sad to see burning issues after flashing Resurrection Remix ROM.
Burning issue didn't happen to me before but after I flashed Custom ROM, I started noticing it.
So then I went to Service Centre and I showed them the issue.. They replaced my LCD Panal.. I was happy and thought I'd not get burning issue again.. But nope.. It happened again..
Then I started searching for posts about burning issue.. And finally on this thread https://forum.xda-developers.com/[email protected]
posted a fix for this.. So first I thought it was a hardware issue but after trying his solution, I realised that it was actually software issue.. It's Actually Colour Calibration issue..
All You need to do is set the "Colour Calibration" as shown in the attachment and It will fix the issue.. This is tested by me and @muzaffarsyam and so far it's working fine.. He has given me the permission to make a thread for this issue...
All Credit Goes To : @muzaffarsyam
Click to expand...
Click to collapse
My latest setting ...
muzaffarsyam said:
My latest setting ...
Click to expand...
Click to collapse
Yes Bro.. Thanks To You
Hi, good thing we come to conclusion to solution, everything I do before this thread started not working.
I`ll try to sett the contrast to Cool (MIUI) since only this logic solution.
I try to check the LCD on CIT and the issue not showing, so I`m 60% sure this is software/setting issue
tekka19 said:
Hi, good thing we come to conclusion to solution, everything I do before this thread started not working.
I`ll try to sett the contrast to Cool (MIUI) since only this logic solution.
I try to check the LCD on CIT and the issue not showing, so I`m 60% sure this is software/setting issue
Click to expand...
Click to collapse
All we need is to make report at xiaomi..
muzaffarsyam said:
All we need is to make report at xiaomi..
Click to expand...
Click to collapse
Yes.. Exactly.. How How Can We Approach? Where To Mail?
What about MIUI 9 ? After change it to cool setting burn in is still visible.
djibril13 said:
What about MIUI 9 ? After change it to cool setting burn in is still visible.
Click to expand...
Click to collapse
This Is Only Tested In LOS 14.1 Based ROM.. I Haven't Tested Or Flashed MiUi 9 Yet.. So Please Wait.. Maybe @muzaffarsyam Or @tekka19 Will Come Up With A Fix . Or I'll Try To Make A Fix When I Flash MiUi 8 Or MiUi 9
Use any kernel manager app and set RGB like this in screenshot and take a rest of phone 30 min screen burn gone
Blueman1990 said:
Use any kernel manager app and set RGB like this in screenshot and take a rest of phone 30 min screen burn gone
Click to expand...
Click to collapse
Wow.. Great.. Thanks For Sharing
Ripunjoy said:
Wow.. Great.. Thanks For Sharing
Click to expand...
Click to collapse
Thanks dude....
It works like charm
HaiderHady said:
Thanks dude....
It works like charm
Click to expand...
Click to collapse
You're Welcome
Ripunjoy said:
You're Welcome
Click to expand...
Click to collapse
which color profile should I use??
alfat696 said:
which color profile should I use??
Click to expand...
Click to collapse
Default One
Ripunjoy said:
Default One
Click to expand...
Click to collapse
i still have a little burn in top ...what should i do bro?
alfat696 said:
i still have a little burn in top ...what should i do bro?
Click to expand...
Click to collapse
I Had Too.. On The Status Bar.. But Fixed Now.. Go To Colour Calibration Option And Set RGB As The Attachment Picture In The Thread
Ripunjoy said:
I Had Too.. On The Status Bar.. But Fixed Now.. Go To Colour Calibration Option And Set RGB As The Attachment Picture In The Thread
Click to expand...
Click to collapse
yap still there is a bit ....will it disappear slowly??
alfat696 said:
yap still there is a bit ....will it disappear slowly??
Click to expand...
Click to collapse
I Think So.. Are Seeing Same Burn In For More Than 1 Hour?
kinda bt its slowly fading