Anyway to rollback from b150 to b130 ?
I trying with the stock b130 with vol +vol _ power buttons but its failed after 5%
And I unlocked boot loader and flashed b130 with twrp but the boot loader still unlocked
Then I flashed b 130 with vol +vol _ power buttons but its failed after 5% again
I don't have any idea who can do that , are you have ?
Why will you do that?
I also want to rollback to 130 from C185B150 but dont know how to
---------- Post added at 01:56 PM ---------- Previous post was at 01:56 PM ----------
Johnny TDN said:
Why will you do that?
Click to expand...
Click to collapse
B150 has music stutter/lag issue at times
Johnny TDN said:
Why will you do that?
Click to expand...
Click to collapse
Coz I think the betray drain
I don't have this problems anyway.
My friend rolled back successfully without problems from B150 to B120 or 130, I don't remember. Are you sure you have downloaded the right firmware?
Try this:
1. Install B150 again from the "update.app" from SD card. That will lock your bootloader and get you back to stock state.
2. Download the correct B130 or B120 firmware for your device, format the SD card and put ONLY "update.app" on it.
3. Try to install with vol +- and power button method.
If those fail, try the following:
Unlock bootloader and restart device. When the message about "your device can't be trusted appears", press the correct button so EMUI will try to install it.
Also, keep the B130 or B120 on the SD card for this as well.
Good luck!
If i were you...i would update to B161.
Johnny TDN said:
If i were you...i would update to B161.
Click to expand...
Click to collapse
there is no 161 update for C185 Region.B150 is the latest and in my country B140 OTA is the latest but i installed B150 manually.
Memovic said:
My friend rolled back successfully without problems from B150 to B120 or 130, I don't remember. Are you sure you have downloaded the right firmware?
Try this:
1. Install B150 again from the "update.app" from SD card. That will lock your bootloader and get you back to stock state.
2. Download the correct B130 or B120 firmware for your device, format the SD card and put ONLY "update.app" on it.
3. Try to install with vol +- and power button method.
If those fail, try the following:
Unlock bootloader and restart device. When the message about "your device can't be trusted appears", press the correct button so EMUI will try to install it.
Also, keep the B130 or B120 on the SD card for this as well.
Good luck!
Click to expand...
Click to collapse
am sure have the right firmware
but the ask ur friend rolled back from offcial firmware for her country or from another country
I have done the tips ur frin done but those fail , i will retray again
thanks for replay
had the same issue from b151 when trying to install b130 stack at 5% then try b120 more then 3 times (it was stopped at 5% but when the phone boots it shows that was in b120) then make it OTA update and now i'm on b150 and works fine.
radwan020 said:
am sure have the right firmware
but the ask ur friend rolled back from offcial firmware for her country or from another country
I have done the tips ur frin done but those fail , i will retray again
thanks for replay
Click to expand...
Click to collapse
You can try with your rollback file model in this post if flash complete you can downgrade to mm
And tell us
Related
if you are on EMUI 4.1 please revert back to EMUI 4.0
i.e if you are on C185B320 Firmware
1.download from the following link
https://drive.google.com/file/d/0B4pdCPNb_MSHMVRNc2dGUjBoQkE/vie
2.copy the update.app to dload folder created in phone memory.
3.shutdown the mobile and press volume up+ vlume down+power key
4.install the firmware
5.download C185B200 Firmware from the following link
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v65326/f1/full/update.zip
6.copy the update.app to dload folder created in phone memory
7.shutdown the mobile and press volume up+ vlume down+power key
5.install firmware factory reset then choose the region south africa
6.you will be prompted with update C185B560
if you are on C185B190 or C185B180 Firmware
1.download C185B200 Firmware from the following link
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v65326/f1/full/update.zip
2.copy the update.app to dload folder created in phone memory
3.shutdown the mobile and press volume up+ vlume down+power key
4.install firmware factory reset then choose the region south africa
5.you will be prompted with update C185B560
habp1i said:
if you are on EMUI 4.1 please revert back to EMUI 4.0
i.e if you are on C185B320 Firmware
1.download from the following link
https://drive.google.com/file/d/0B4pdCPNb_MSHMVRNc2dGUjBoQkE/vie
2.copy the update.app to dload folder created in phone memory.
3.shutdown the mobile and press volume up+ vlume down+power key
4.install the firmware
5.download C185B200 Firmware from the following link
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v65326/f1/full/update.zip
6.copy the update.app to dload folder created in phone memory
7.shutdown the mobile and press volume up+ vlume down+power key
5.install firmware factory reset then choose the region south africa
6.you will be prompted with update C185B560
if you are on C185B190 or C185B180 Firmware
1.download C185B200 Firmware from the following link
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v65326/f1/full/update.zip
2.copy the update.app to dload folder created in phone memory
3.shutdown the mobile and press volume up+ vlume down+power key
4.install firmware factory reset then choose the region south africa
5.you will be prompted with update C185B560
Click to expand...
Click to collapse
Could you put there working link (from Google drive), please?
klekot31 said:
Could you put there working link (from Google drive), please?
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B4pdCPNb_MSHMVRNc2dGUjBoQkE/view
habp1i said:
https://drive.google.com/file/d/0B4pdCPNb_MSHMVRNc2dGUjBoQkE/view
Click to expand...
Click to collapse
If I can ask. Is it 100% safe? My phone can't be bricked?
There's a problem, if i try to install the rollback package it says that theres's no update package. How to solve it?
I'm in UAE, having NXT l29c185b200, did the factory reset, chosen South Africa as region but never got the update prompt of b560
please help
after update to b200 .. phone stay on logo
miladheris said:
please help
after update to b200 .. phone stay on logo
Click to expand...
Click to collapse
Reboot you phone, hold volume up + power for some time to enter recover, wipe data and format factory reset.
This guide don´t work, I have tried 5 times but this update is not shown, also the Themes don´t apply after the rollback.
abraaocaldas said:
Reboot you phone, hold volume up + power for some time to enter recover, wipe data and format factory reset.
This guide don´t work, I have tried 5 times but this update is not shown, also the Themes don´t apply after the rollback.
Click to expand...
Click to collapse
I'm always a little shy when someone with less than a dozen posts, posts roms to download. I'm just not very trusting.
Burned once, twice shy!
p51d007 said:
I'm always a little shy when someone with less than a dozen posts, posts roms to download. I'm just not very trusting.
Burned once, twice shy!
Click to expand...
Click to collapse
hi did you read the thread
if you are already on B180 no need to roll back go to next step download B200 firmware the update using dload method
habp1i said:
hi did you read the thread
if you are already on B180 no need to roll back go to next step download B200 firmware the update using dload method
Click to expand...
Click to collapse
if you are on C185B190 or C185B180 Firmware
1.download C185B200 Firmware from the following link
http://update.hicloud.com:8180/TDS/d...ull/update.zip
2.copy the update.app to dload folder created in phone memory
3.shutdown the mobile and press volume up+ vlume down+power key
4.install firmware factory reset then choose the region south africa
5.you will be prompted with update C185B560
miladheris said:
please help
after update to b200 .. phone stay on logo
Click to expand...
Click to collapse
Press volume up and power you willl be entered into erecovery then choose shut down
then again press volume up and powerbutton you will be redirected to recovery there wipe chache and factory reset.then it will boot normally.
klekot31 said:
If I can ask. Is it 100% safe? My phone can't be bricked?
There's a problem, if i try to install the rollback package it says that theres's no update package. How to solve it?
Click to expand...
Click to collapse
you are on which firmware
habp1i said:
you are on which firmware
Click to expand...
Click to collapse
I'm on B320
klekot31 said:
I'm on B320
Click to expand...
Click to collapse
then it is ok
follow the steps for update
BongAlvi said:
I'm in UAE, having NXT l29c185b200, did the factory reset, chosen South Africa as region but never got the update prompt of b560
Click to expand...
Click to collapse
download again B200 firmware and do update using dload method then factory reset choose region as southafrica
you will get the update
habp1i said:
then it is ok
follow the steps for update
Click to expand...
Click to collapse
As I said before, when I want to install the first file (rollback package) it says, that the update failed or something like that. So I can't follow the steps.
klekot31 said:
As I said before, when I want to install the first file (rollback package) it says, that the update failed or something like that. So I can't follow the steps.
Click to expand...
Click to collapse
after download update.app rollback what is the size you are getting
habp1i said:
after download update.app rollback what is the size you are getting
Click to expand...
Click to collapse
234 MB
habp1i said:
hi did you read the thread
if you are already on B180 no need to roll back go to next step download B200 firmware the update using dload method
Click to expand...
Click to collapse
Yes I read HIS thread...I was responding to someone else who said it DID NOT work.
I'm always a little wary, when I see someone throw up a rom, that has very few posts.
Since for work, I am 100% dependent on my phone, I can't afford to brick it, or be screwing around with something questionable.
This guide don´t work. I´m on B200 and factory reset and set the country to South Africa but the updater keep saying that there is no update.
Hi Guys.
Maybe somebody can help here:
I am on B161 and get the OTA Update for B371 - but only the 2.5GB version! And with this update, bluetooth and many more things don't work.
What can I do to Upgrade to nougat? Which Version should I use? How to upgrade correctly?
I don't get the full B371 Upgrade option in the system. And when i Install the B371 Image from Firmware Finder (VNS-L31C432B371 FullOTA-MF-PV) its not working either...
PLEASE help, Nougat has a much better Ram Usage und battery life then MM on my P9 Lite 2GB Variant.....
Thanks!
Better wait.
Nougat has battery drain.
Johnny TDN said:
Better wait.
Nougat has battery drain.
Click to expand...
Click to collapse
But the thing is -> i have the Update available to B371 but it is only the 2,5gb version and i'm thinking will this update be replaced with another one or am i stuck on this update the system wants to give me...
If your phone is stock and update is available via System Updater, go for it!
You have nothing to lose...
gtdaniel said:
If your phone is stock and update is available via System Updater, go for it!
You have nothing to lose...
Click to expand...
Click to collapse
I was on B371 before but had the issue with bluetooth not working etc. Then i did the rollback package and afterwards went back to B161 - so i suppose its not really stock?
I'm just thinking - now i am on B161 and B371 Update is visible for me - but only the 2.5GB variant - and i don't want to update and have the same issues and again do the rollback and loose all my data?
Also i don't really now what it means exactly to be on "Stock" rom - because i think B161 is the actual Stock rom for now?
EDIT: Also i See i have the Firmware VNS-L31 but my Model is actually VNS-L21 so thats weird too.
e-coder said:
I was on B371 before but had the issue with bluetooth not working etc. Then i did the rollback package and afterwards went back to B161 - so i suppose its not really stock?
I'm just thinking - now i am on B161 and B371 Update is visible for me - but only the 2.5GB variant - and i don't want to update and have the same issues and again do the rollback and loose all my data?
Also i don't really now what it means exactly to be on "Stock" rom - because i think B161 is the actual Stock rom for now?
EDIT: Also i See i have the Firmware VNS-L31 but my Model is actually VNS-L21 so thats weird too.
Click to expand...
Click to collapse
Stock phone means unaltered phone (firmware official, bootloader lock, stock recovery etc)
If you have VNS-L31 firmware on VNS-L21 phone is not ok... So your phone is altered...
gtdaniel said:
Stock phone means unaltered phone (firmware official, bootloader lock, stock recovery etc)
If you have VNS-L31 firmware on VNS-L21 phone is not ok... So your phone is altered...
Click to expand...
Click to collapse
Ok Thanks!
I tried the update now and as supposed it is the update with the nrdm900 test-key
what would be best to do? do the rollback to vns-l21c432b161 and wait? i think this firmware version would be stock?
e-coder said:
Ok Thanks!
I tried the update now and as supposed it is the update with the nrdm900 test-key
what would be best to do? do the rollback to vns-l21c432b161 and wait? i think this firmware version would be stock?
Click to expand...
Click to collapse
First of all you have to bring your phone on stock condition (VNS-L21C432B131).
After that you have to apply a B161 official update.
And from there, with Firmware Finder you go to B371.
gtdaniel said:
First of all you have to bring your phone on stock condition (VNS-L21C432B131).
After that you have to apply a B161 official update.
And from there, with Firmware Finder you go to B371.
Click to expand...
Click to collapse
Ok i Will update to the rollback package. After that i will update to B131. Do you have a link for that?
EDIT: Found the Link here http://firmware.smartphonewp.com/do...irmware-version-b131-android-6-0-marshmallow/
And when i am on B131 can I Update via system Updater to b161 ?
e-coder said:
Ok i Will update to the rollback package. After that i will update to B131. Do you have a link for that?
EDIT: Found the Link here http://firmware.smartphonewp.com/do...irmware-version-b131-android-6-0-marshmallow/
And when i am on B131 can I Update via system Updater to b161 ?
Click to expand...
Click to collapse
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v54896/f1/full/update.zip
gtdaniel said:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v54896/f1/full/update.zip
Click to expand...
Click to collapse
Thanks man! you're great!
And when B131 is installed will i get B161 via system update?
e-coder said:
Thanks man! you're great!
And when B131 is installed will i get B161 via system update?
Click to expand...
Click to collapse
Yes, that it should be if everything works fine.
gtdaniel said:
Yes, that it should be if everything works fine.
Click to expand...
Click to collapse
lol ok i did the rollback with the rollback package which obviously only changes the oeminfo to VNS-L31C900B300 (as mentioned in another post to rollback from Nougat to MM)
Now when I try to Install the B131 Package with dload method it says the firmware doesnt fit. The build is not correct for this device
EDIT: i try now to install it via Firmware Finder, lets see if theres better luck with that - Or should I ? The update has only 1,5GB - that confuses me Allthough i selected the FULL OTA
e-coder said:
lol ok i did the rollback with the rollback package which obviously only changes the oeminfo to VNS-L31C900B300 (as mentioned in another post to rollback from Nougat to MM)
Now when I try to Install the B131 Package with dload method it says the firmware doesnt fit. The build is not correct for this device
EDIT: i try now to install it via Firmware Finder, lets see if theres better luck with that - Or should I ? The update has only 1,5GB - that confuses me Allthough i selected the FULL OTA
Click to expand...
Click to collapse
Man, you are in twilight zone if your VNS-L21 phone have VNS-L31 firmware...
I said earlier: First of all you have to bring your phone on stock condition (VNS-L21C432B131).
That you have to do first!
gtdaniel said:
Man, you are in twilight zone if your VNS-L21 phone have VNS-L31 firmware...
I said earlier: First of all you have to bring your phone on stock condition (VNS-L21C432B131).
That you have to do first!
Click to expand...
Click to collapse
Man I tried Tried to do the upgrade via dload method - doesnt work. I tried to install B131 via Firmware Finder - didnt work he cant do it - while verifying the update package switches a few times from 0 to 1 % and after some times he says the package is corrupt.
Can I go just higher than B371 to get everything working again?
Or flash back to B131 with some TWRP or something like that?
Or maybe try to flash the B371 with firmware finder again? That version where it says FullOTA-MF-PV (whatever PV means)
If i was you, i do following:
- first, i make sure if my phone is VNS-L21 (very important!)
- put in dload folder on microsdcard, update.app from B161 firmware: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66051/f1/full/update.zip
- flash via twrp oeminfo from this link: https://mega.nz/#!Egl01ZpJ!g1K9xV2yZ4oyoBKxFMOWgghTTUzqLUBoBeXkUboCi-A
- start phone with 3 keys combination and let firmware to repair itself.
gtdaniel said:
If i was you, i do following:
- first, i make sure if my phone is VNS-L21 (very important!)
- put in dload folder on microsdcard, update.app from B161 firmware: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66051/f1/full/update.zip
- flash via twrp oeminfo from this link: https://mega.nz/#!Egl01ZpJ!g1K9xV2yZ4oyoBKxFMOWgghTTUzqLUBoBeXkUboCi-A
- start phone with 3 keys combination and let firmware to repair itself.
Click to expand...
Click to collapse
thats what i try - to get back to vns-l21 but no image worked so far .... i will try to update to vns-l21c432b160 firmware with firmware finder maybe that'll work...
what is in this oeminfo file and is there another way to flash it without twrp?
e-coder said:
thats what i try - to get back to vns-l21 but no image worked so far .... i will try to update to vns-l21c432b160 firmware with firmware finder maybe that'll work...
what is in this oeminfo file and is there another way to flash it without twrp?
Click to expand...
Click to collapse
Nope, oeminfo must be flashed via twrp or via some tools (for that is need root).
In that oeminfo file is stock oeminfo for installing VNS-L21C432B161 firmware.
gtdaniel said:
Nope, oeminfo must be flashed via twrp or via some tools (for that is need root).
In that oeminfo file is stock oeminfo for installing VNS-L21C432B161 firmware.
Click to expand...
Click to collapse
Hm okay, so the first problem needs to be solved first - i am in VNS-L31C900B300 now - how can i get back to SOME VNS-L21 image....? as said i tried to dload the B131 Image you gave me the link for but it didnt work to update.
Right now i am trying to install VNS-L21C432B371 FullOTA-MF-PV from FF.... EDIT: Ok that does not work either
e-coder said:
Hm okay, so the first problem needs to be solved first - i am in VNS-L31C900B300 now - how can i get back to SOME VNS-L21 image....? as said i tried to dload the B131 Image you gave me the link for but it didnt work to update.
Right now i am trying to install VNS-L21C432B371 FullOTA-MF-PV from FF....
Click to expand...
Click to collapse
Ok... Good luck, but from my experience i think you can not do something right until you flash oeminfo right for your device...
hey xda.
i got unlocked bootloader and twrp installed.
i formatet data via twrp now i cant flash a rom?
(unable to write data) or something
I cant go to the Dload function
if im now in twrp my phone keeps restarting
i have adb installed
i really need help, i can do it my self or u can help via teamviewer i ****t brand new phone
and when im wipe
Failed to mount cust
failed to mount daata
failed to mount system
I have to know your system version that you have cancelled and the recovery version, because Nougat is different from MM
What phone do you have? (Back of the phone it tells you what VNS is. Say what VNS is.)
Ask somebody to send you a backup of their rom.
Jinclaudio said:
I have to know your system version that you have cancelled and the recovery version, because Nougat is different from MM
Click to expand...
Click to collapse
I rolled back from nogat to mm my phone is L31, the version i rolled to was full ota b161 i think or 161
Johnny TDN said:
What phone do you have? (Back of the phone it tells you what VNS is. Say what VNS is.)
Ask somebody to send you a backup of their rom.
Click to expand...
Click to collapse
p9 lite vns FUH7N17311000495 (backup folder) :S
where do i find the VNS number
You can try to recovery the stock ROM with dload method.
1. May sure that you've flashed the OEM info. It will lock your bootloader.
2. Put update.app in dload. The version can be b161.
3 update.
Reboot
---------- Post added at 04:30 PM ---------- Previous post was at 04:27 PM ----------
https://drive.google.com/file/d/0B70jqOUVoiIDbjhPdnZxaEFxUEU/view?usp=drivesdk
Here is oeminfo that I used, flahsable with twrp, if you need
mhmortensen said:
p9 lite vns fuh7n17311000495 (backup folder) :s
where do i find the vns number
Click to expand...
Click to collapse
on the back of the crap phone!
Johnny TDN said:
on the back of the crap phone!
Click to expand...
Click to collapse
I know its L31c432.
But the question is.
I will dload now, Can i dload to the Newest firmware (nogat orginal). I just flash the recovery from the update app
Mhmortensen said:
I know its L31c432.
But the question is.
I will dload now, Can i dload to the Newest firmware (nogat orginal). I just flash the recovery from the update app
Click to expand...
Click to collapse
Get the 6.0 version.
Nougat is a bit unstable (battery drain...)
My device is p9 lite vns l31( c636) before i used elite roam v7.6. but now i want to go back stock roam. To go back i used roall back mm and c636b170 full ota. But now my devise build number is c900b170. I want to upgrade nauget c636. Please help me.
rathnayakepr3 said:
My device is p9 lite vns l31( c636) before i used elite roam v7.6. but now i want to go back stock roam. To go back i used roall back mm and c636b170 full ota. But now my devise build number is c900b170. I want to upgrade nauget c636. Please help me.
Click to expand...
Click to collapse
Hello man,
did you removed prevoius update.app from SD card, the one from rollback??
Maybe you forgot to do this...
If you sure you done all things right then take a look at the UNIFIED HELP THREAD...
At 6th post you'll find a L31 rollback package that will give you C900B300 global firmware.
From this flash C636B170 full ota and see if worked this time....
https://forum.xda-developers.com/huawei-p9lite/how-to/unified-help-thread-huawei-p9-lite-t3649152
Dadditz said:
Hello man,
did you removed prevoius update.app from SD card, the one from rollback??
Maybe you forgot to do this...
If you sure you done all things right then take a look at the UNIFIED HELP THREAD...
At 6th post you'll find a L31 rollback package that will give you C900B300 global firmware.
From this flash C636B170 full ota and see if worked this time....
https://forum.xda-developers.com/huawei-p9lite/how-to/unified-help-thread-huawei-p9-lite-t3649152
Click to expand...
Click to collapse
.
But i donnt know how to flash oem info and custom bin through the toolkit. Please help me.
rathnayakepr3 said:
.
But i donnt know how to flash oem info and custom bin through the toolkit. Please help me.
Click to expand...
Click to collapse
Hello dude,
in the guide i never readed to use the toolkit, that's another way i think...
Flashing the rollback package will bring you c900b300 firmware wich means global intermediate transitive firmware...
Create a dload folder in SD card, extract update.app from rollback package and put in it.
Turn off you phone. Now disconnect from PC, and let it start keeping vol+ vol- and power buttons.
When it ends turn it off and remove the SD card and the update.app from dload folder.
Download and extract update.app from L31C636B170 full update.
If you missed it...
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66846/f1/full/update.zip
Put this in dload folder in SD card again and put in your phone...
Repeat vol+ vol- power buttons and it will flash...
Recommended: when finished reboot to e_recovery (vol+ power buttons) and factory reset.
If all gone well you will stay now on marshmallow firmware..
Wish you the best my friend...:fingers-crossed:
Edit: flash the rollpack package suggested in prevoius post.
All credits goes to @dariomrk and other contributors that create the thread.
Thank you guys.
Hey guys, I've somehow managed to brick my device while I was half asleep. Now I've installed just the UPDATED.app by using the dload method, this worked but I'm facing the issue of not having bluetooth work. I've tried several update files but the result is either that it flashes and it doesnt work correctly still, or it doesnt flash at all. I've only ever flashed the updated.app from the update.zip, but I haven't touched anything else, including the update_data_full_public.zip or update_full_VNS-L31_hw_eu. Is there a way to use the dload method of some sort to freshly install the firmware correctly? Right now I'm sitting on region C432 and B371. Any help is appreciated!
driftmaniac7 said:
Hey guys, I've somehow managed to brick my device while I was half asleep. Now I've installed just the UPDATED.app by using the dload method, this worked but I'm facing the issue of not having bluetooth work. I've tried several update files but the result is either that it flashes and it doesnt work correctly still, or it doesnt flash at all. I've only ever flashed the updated.app from the update.zip, but I haven't touched anything else, including the update_data_full_public.zip or update_full_VNS-L31_hw_eu. Is there a way to use the dload method of some sort to freshly install the firmware correctly? Right now I'm sitting on region C432 and B371. Any help is appreciated!
Click to expand...
Click to collapse
Use rollback package, go back to A6, flash via dload C432B161 (A6 firmware for your phone), factory reset, and try update to Nougat via OTA or via Firmware finder.
You can't flash Nougat FW via dload.
bozka1 said:
Use rollback package, go back to A6, flash via dload C432B161 (A6 firmware for your phone), factory reset, and try update to Nougat via OTA or via Firmware finder.
You can't flash Nougat FW via dload.
Click to expand...
Click to collapse
I've looked for the B161 one, I have found one although it doesn't really work as it says "incompatible versions" in the dload method, am I doing something wrong or am I forgetting something? I'm using the one from this website https://www.gizrom.com/b161-emui-4-1-huawei-p9-lite-android-6-0/
driftmaniac7 said:
I've looked for the B161 one, I have found one although it doesn't really work as it says "incompatible versions" in the dload method, am I doing something wrong or am I forgetting something? I'm using the one from this website https://www.gizrom.com/b161-emui-4-1-huawei-p9-lite-android-6-0/
Click to expand...
Click to collapse
Which version have you, VNS-L21?
bozka1 said:
Which version have you, VNS-L21?
Click to expand...
Click to collapse
VNS-L31, dual sim one
driftmaniac7 said:
VNS-L31, dual sim one
Click to expand...
Click to collapse
Strange, if your phone is dual SIM, B371 is wrong FW, it's for single SIM, okay, if you have dual, download rollback package for L-31:
http://download-c1.huawei.com/download/downloadCenter?downloadId=93789&version=373429&siteCode=sk
and VNS-L31C432B160:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66034/f1/full/update.zip
Now unpack rollback package, and paste update.app in the dload folder on SD card and flash using three button combo.
Remove rollback from dload folder, unpack B160 and paste update.app in dload, and flash (button combo). Factory reset and voila! you are on Marsmallow .
bozka1 said:
Strange, if your phone is dual SIM, B371 is wrong FW, it's for single SIM, okay, if you have dual, download rollback package for L-31:
http://download-c1.huawei.com/download/downloadCenter?downloadId=93789&version=373429&siteCode=sk
and VNS-L31C432B160:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66034/f1/full/update.zip
Now unpack rollback package, and paste update.app in the dload folder on SD card and flash using three button combo.
Remove rollback from dload folder, unpack B160 and paste update.app in dload, and flash (button combo). Factory reset and voila! you are on Marsmallow .
Click to expand...
Click to collapse
I just did them, I think I was missing the rollback package. Bluetooth does work, as everything else. I think there should be an option to update, however I'm not sure which version I should find on the huawei firmware finder. The normal Updater doesn't seem to have an update (yet, I'm not sure if it'll pop up either). Any idea which is the most recent one that I can try? As I thought b371 was good but apparantly its single sim Thank you!
driftmaniac7 said:
I just did them, I think I was missing the rollback package. Bluetooth does work, as everything else. I think there should be an option to update, however I'm not sure which version I should find on the huawei firmware finder. The normal Updater doesn't seem to have an update (yet, I'm not sure if it'll pop up either). Any idea which is the most recent one that I can try? As I thought b371 was good but apparantly its single sim Thank you!
Click to expand...
Click to collapse
If you are now on B160, and can't update to Nougat via OTA (dont forget insert SIM card into phone), use Firmware finder, and send to update this FW: VNS-L31C432B370 FullOTA-MF-PV. "PV" is very important! No.: 80460 . And check firmware accses for your phone with IMEI.
bozka1 said:
If you are now on B160, and can't update to Nougat via OTA (dont forget insert SIM card into phone), use Firmware finder, and send to update this FW: VNS-L31C432B370 FullOTA-MF-PV. "PV" is very important! No.: 80460 . And check firmware accses for your phone with IMEI.
Click to expand...
Click to collapse
I think I found that one, why was the PV important? Does it contain stuff that I was missing? I've also checked it with the firmware access, it seems it's working with the updater. It's still downloading, but I think it'll work. In any case thank you!
driftmaniac7 said:
I think I found that one, why was the PV important? Does it contain stuff that I was missing? I've also checked it with the firmware access, it seems it's working with the updater. It's still downloading, but I think it'll work. In any case thank you!
Click to expand...
Click to collapse
It did work, there is another update waiting though, is it safe to update to the 380 version?
driftmaniac7 said:
It did work, there is another update waiting though, is it safe to update to the 380 version?
Click to expand...
Click to collapse
You can now update the newest approved FW (for dual SIM )
bozka1 said:
You can now update the newest approved FW (for dual SIM )
Click to expand...
Click to collapse
Aye I noticed, I had lots of updates, I updated the thing 5 times now I ended up on 40x,. Thank you for the help!
driftmaniac7 said:
Aye I noticed, I had lots of updates, I updated the thing 5 times now I ended up on 40x,. Thank you for the help!
Click to expand...
Click to collapse
You’re welcome