Database Users

Waterproof G2/DZ ...?

First I have to say, this is the first phone i have had for a year and it still looks like almost new
This morning when my alarm on my phone screamed at me to get out of bed, i accidentally tipped over a full glass of water that i had next to my bed, all the water got on my phone and my phone died (at first), i removed the battery as fast as i could and noticed that the "moist-markings" (?) on the phone and the battery had turned from white to red..
and it still works..
well ok, i used my mouth to blow very hard into the phone to get the water to disappear, but i never disassembled it or anything to dry it.. i have been using the phone all day and still can't find any malfunction :S Did i have an incredible amount of luck or is the G2/DZ waterproofed in any way?

The phone is in no way waterproof. But I've seen other folks on here that have had luck after getting their phones wet (even complete immersion), then had them come back to life after drying them out. Removing the battery quickly is definitely key.
I think you just got lucky, and water did not yet get to any places that could cause a short circuit and permanently damage the phone. I'd let the thing dry out as much as you can for a day or 2 (rice in bag trick seems to work wonders). At least dry it while you are sleeping. You never know, there can be some water hiding somewhere in there, that can still mess things up by flowing into the wrong place.

You, my friend, just have incredible luck.
The G2 is not waterproofed. I accidentally dropped mine into a glass of water, and let's just say, it did not fare so well... The screen colors went wonky, it stopped responding to touch, and half the keyboard keys stopped working.
Needless to say, I didn't get a warranty replacement on that one! (Thank goodness for insurance.)

Take the battery out of the phone and put it in a sealed bag of uncooked rice. This will draw moisture out of the device.
You're extremely lucky that it works currently, but you may get future problems from corrosion with any water that got into the device. You should give it a couple days in rice to pull out what moisture you can.

martonikaj said:
Take the battery out of the phone and put it in a sealed bag of uncooked rice. This will draw moisture out of the device.
You're extremely lucky that it works currently, but you may get future problems from corrosion with any water that got into the device. You should give it a couple days in rice to pull out what moisture you can.
Click to expand...
Click to collapse
X2. Rice works wonders!
Sent from my HTC Vision using xda premium

Dessicant work better lol. www.ifixit.com has awesome bags fire just such emergencies. If you do go the rice route, put the phone in a panty hose our something similar or you well have rice dust in your phone forever! Lol

Okay, ex cell tech here... (oh God not him again! ) you were lucky because it was water. Soda or juice kills and rusts much quicker plus sugary residue left behind. I recommend taking it apart and scrubing all components you can with an old toothbrush and alcohol. Hand sanitizer will do just use it more sporatically. The problem is, what someone meantioned before, is the corrsive action that takes place after drying. It may happen a month later but it will unless you take it appart and dry it out. The bag of rice is okay but if you want to be 100% safe, take it appart. The warranty is void anyways, no worries. There are a few good guides on disassembly.
Good luck! Excuse my spelling... in a hurry.
I've done this for well over 200 phones and had about 70% success rate. Rice is good if you're not technical but if you want to be positive... take it apart and scrub away. The alcohol will dry up components and remove any corrusive buildup forming. Let us know how it goes...

sino8r said:
Okay, ex cell tech here... (oh God not him again! ) you were lucky because it was water. Soda or juice kills and rusts much quicker plus sugary residue left behind. I recommend taking it apart and scrubing all components you can with an old toothbrush and alcohol. Hand sanitizer will do just use it more sporatically. The problem is, what someone meantioned before, is the corrsive action that takes place after drying. It may happen a month later but it will unless you take it appart and dry it out. The bag of rice is okay but if you want to be 100% safe, take it appart. The warranty is void anyways, no worries. There are a few good guides on disassembly.
Good luck! Excuse my spelling... in a hurry.
I've done this for well over 200 phones and had about 70% success rate. Rice is good if you're not technical but if you want to be positive... take it apart and scrub away. The alcohol will dry up components and remove any corrusive buildup forming. Let us know how it goes...
Click to expand...
Click to collapse
I'm an avionics tech myself, while alcohol works wonders and it is the sure fire way, I reccomend the bag of rice trick mostly because not everyone is like us and wants to completly disemble they're cell. And a bag of rice is a no brainer lol. So long as you put it in rice and leave it in for a few days promptly after the incident you should be ok.
Sent from my HTC Vision using xda premium

ptesmoke said:
I'm an avionics tech myself, while alcohol works wonders and it is the sure fire way, I reccomend the bag of rice trick mostly because not everyone is like us and wants to completly disemble they're cell. And a bag of rice is a no brainer lol. So long as you put it in rice and leave it in for a few days promptly after the incident you should be ok.
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Yeah, you're right. To me and you, its just removing a few T5 screws and unhooking a few ribbon wires. The rice is good enough. Just be sure to pull the battery, sim, and sd card. Powered on device could make it corrode faster...

sino8r said:
Okay, ex cell tech here... (oh God not him again! ) you were lucky because it was water. Soda or juice kills and rusts much quicker plus sugary residue left behind. I recommend taking it apart and scrubing all components you can with an old toothbrush and alcohol. Hand sanitizer will do just use it more sporatically. The problem is, what someone meantioned before, is the corrsive action that takes place after drying. It may happen a month later but it will unless you take it appart and dry it out. The bag of rice is okay but if you want to be 100% safe, take it appart. The warranty is void anyways, no worries. There are a few good guides on disassembly.
Good luck! Excuse my spelling... in a hurry.
I've done this for well over 200 phones and had about 70% success rate. Rice is good if you're not technical but if you want to be positive... take it apart and scrub away. The alcohol will dry up components and remove any corrusive buildup forming. Let us know how it goes...
Click to expand...
Click to collapse
Thus is what I do for my phones, and customers phones.

Wow you're lucky! But indeed don't expect it to be safe if you never got it dry in the first place. In fact yuo should follow all the advise in this topic before ever powering it on again! Anyway do it .

Exanimus said:
First I have to say, this is the first phone i have had for a year and it still looks like almost new
Click to expand...
Click to collapse
I think about buying second-hand phones after I opened a beer with my "almost new" DZ...

Water Damage

So I dropped my N1 in water. Took out the battery as soon as possible then I dried what I could with a towel.
After this I tried hours of the rice method (putting my N1 in a bag of dry rice to dry it out). And I was able to successfully boot up my phone again, almost everything works fine but the digitizer/touch screen has some issues.
The rightest side of the screen, about an inch worth is completely unresponsive, so if I load up my app drawer and try to click anything on the right it won't work at all just so you know what I mean.
What can I do about this? Is this a simple fix? Do I just need a new digitizer? Or is it something else?

Water damage can affect anything. Luckily the digitizer is only $25 and there are tons of videos on how to disassemble the phone.

Sounds to me like you've still got a short somewhere inside your N1. Here are some suggestions.
1. Rice is a desiccant, it takes a LONG TIME to actually dry-out something like the internals of a phone. If you can part with the phone for that long, I'd suggest leaving it in the rice for more like 72hours!!
2. If you can't give it that much time, and you've got some tools, skills and a willingness to take apart your N1? Then search youtube for "nexus one disassembly" and take it apart, being extra sure to manually dab dry all areas possible (especially in the digitizer area as you've stated issues around there).
3. Finally, if those steps don't work, you're looking at a digitizer replacement. Which, if you've already taken apart your N1 from step #2, will be an easier swap out for you to handle.
My N1 too went for an unwanted splash as well. Total submersion for a good few seconds as I had to fish it out. Water had gotten into the screen, EVERYTHING was wet.
I had the tools and the mindset that my N1 was likely dead anyway so taking it apart couldn't hurt any further. So I took it completely apart, used a paper towel to dab dry everything possible that I could. Then I left everything out on the table overnight to dry.
Next morning I put it all back together and to my delighted surprise everything worked!
Our N1s are troopers! I'm confident you can bring yours back to full life!
Good luck!

Thanks for the responses!
I will definitely try taking it apart and I'll post back soon on the outcome, if I get lazy though I'll just buy a new digitizer.

How is it possible that water doesn't hurt your N1? It's completely incredible. Few years ago i had a samsung player (my son in fact) that was in contact with water (no immersion!!) and after drying for a week (air then hair-drier!) it was impossible to get it on again.
Is N1 that strong!! So lucky you are!!

abccg said:
Thanks for the responses!
I will definitely try taking it apart and I'll post back soon on the outcome, if I get lazy though I'll just buy a new digitizer.
Click to expand...
Click to collapse
Well if you buy a new digitizer you're gonna have to take it apart anyway haha.
Sent from my Nexus One using Tapatalk

abccg said:
So I dropped my N1 in water. Took out the battery as soon as possible then I dried what I could with a towel.
After this I tried hours of the rice method (putting my N1 in a bag of dry rice to dry it out). And I was able to successfully boot up my phone again, almost everything works fine but the digitizer/touch screen has some issues.
The rightest side of the screen, about an inch worth is completely unresponsive, so if I load up my app drawer and try to click anything on the right it won't work at all just so you know what I mean.
What can I do about this? Is this a simple fix? Do I just need a new digitizer? Or is it something else?
Click to expand...
Click to collapse
Use rice is a real bad idea, hairdryer is the best and i'm pretty sure you can find one in your house or borrow one from your neighbour
Seems like there is still a short in your cellphone and i would recommend you call your manufacturer for this. Anyway, it's risky to repair a cellphone by yourself.

A little over a year ago I washed my Nexus One in the washing machine. Extra bleach, long cycle with an extra rinse cycle since it was a bunch of dirty clothing.
I remembered it was in my pocked when I went to remove my clothing, I was sure it was dead.
I pulled the battery and put the phone on the dry air vent of my dehumidifier for two days. The vent blew warm, completely dry air directly into the open back of my phone.
I popped the battery back in and it's been working like new ever since. The camera colors are ever so slightly off, however.
Let the phone dry out before you try to turn it back on.

Recently had the same issue. In my case was a bit easier.
What I did - removed back cover, battery, SIM, sd-card..
Switched my laptop and loaded it with compiling linux kernel. Then decoding HD video with handbrake. The aim was to get a constant flow of warm air (abt 70 degrees Celcius). And I put my phone close to vent fan out of my laptop. It is not overheating too much (like you can with air dryer).

I had a water damage as well, sliped with phone into the while geocaching. The salt walter wasn't good for my phone... :-(

CCpotter said:
Use rice is a real bad idea, hairdryer is the best and i'm pretty sure you can find one in your house or borrow one from your neighbour
Seems like there is still a short in your cellphone and i would recommend you call your manufacturer for this. Anyway, it's risky to repair a cellphone by yourself.
Click to expand...
Click to collapse
I always thought rice, particularly instant rice because it is so absorbent, or any dessicant was a good strategy.
On the other hand, hair dryers seem a very bad idea. Heat from the dryer can be damaging, but the real damage from a hair dryer is that is sends the air at a strong velocity and it blows the water further in the device.

CCpotter said:
Use rice is a real bad idea, hairdryer is the best and i'm pretty sure you can find one in your house or borrow one from your neighbour
Click to expand...
Click to collapse
cyberstoic said:
I always thought rice, particularly instant rice because it is so absorbent, or any dessicant was a good strategy.
On the other hand, hair dryers seem a very bad idea. Heat from the dryer can be damaging, but the real damage from a hair dryer is that is sends the air at a strong velocity and it blows the water further in the device.
Click to expand...
Click to collapse
Rice is actually a very good thing to use just like cyberstoic says. It sucks the water into the rice and gets it out of the device.
The reason he listed for the hair dryer is valid, but it isn't the main reason. The main reason is that the hair dryer will just cause the water to evaporate, but that doesn't necessarily mean that the super humid air will leave the device, so as soon as it cools back down, you will still have that moisture in there.\
This is why rice or other desiccants (like all those silica gel packets that come with a lot of packaging) are used. They actually pull the moisture out of the device.

Rice worked for me when my N1 spent a night soaking in seltzer. (not completely submerged, but enough to get a big batch under the screen) But first I used a vacuum to suck out as much of the seltzer as I could. Then I put it in rice for about 30 hours.
Sent from my Atrix 2 using Tapatalk...

cyberstoic said:
I always thought rice, particularly instant rice because it is so absorbent, or any dessicant was a good strategy.
On the other hand, hair dryers seem a very bad idea. Heat from the dryer can be damaging, but the real damage from a hair dryer is that is sends the air at a strong velocity and it blows the water further in the device.
Click to expand...
Click to collapse
What about the dirt in the rice? If you use rice to dry those water inside, the dirt with rice will melt with the water inside and make damage to your elements.
If you use hair dryer in a proper way, it can dry your water inside without causing any damage. Have seen after-sale repair workers do this many times.

CCpotter said:
If you use hair dryer in a proper way, it can dry your water inside without causing any damage. Have seen after-sale repair workers do this many times.
Click to expand...
Click to collapse
Did you read my response at all? While it is possible for the hair dryer to fix the problem, it can also cause the problem to remanifest itself if that humid air doesn't actually leave the casing. That is the point of the rice. Dirt in the rice is irrelevant. We aren't talking about that much water, and the phone is still in its casing. The rice is just removing the moisture from the air.

Phone fell in water

Still works but the screen is foggy and flickers alot.
A friend of mine was telling me that something in the batter triggers and sprint can tell if it had water damage or not. How can i tell and look for that?
I also want to take it in but dont want sprint finding out about the water damage. Is there a loophole?
Shifted from my EVO

Well first things first. Turn it off, pull the battery. Do not try to restart it. You have several choices to dry it out. One really and proven one is rice. Fill a container half way with rice. Then stick your phone in the rice with the battery out, and the cover off. Push it down into the rice, and let it stay there for at least two days in a warm dry place. The other was actually used by a member here on XDA. He used is a Dehydrator. Not sure of the details, but it definately worked. I'd say set it on low and leave it there for at least 24hrs. Sprint can tell if the phone has been dropped in water by checking the water damage indicators. On the phone itself, and the battery. They're Red checkered squares. They turn bright Red when dropped in water. Although it has been proven they're not very reliable.

^^ is correct about the indicator on the battery. Its a little sticker and i always pull it off and take it to them. Once they asked me about the sticker and i just told them i have no idea what your talking about and that i didn't know about any sticker. Playing dumb helps

Take battery out....Stick it in oven on warm heat...take it out after 10 minutes to let it cool down.....repeat like 4 times.....
Sounds freaky but i fixed an iPod Touch and a Droid X with this method

Thanks for the replies guys. I ended up using a hair dryer on heat. It's not that bad of a condition. Everything seems to work properly (so far). This would happen when a ICS beta ROM comes to our phones... -_-

is there any other indications that sprint would be able to tell if it had water damage?

Enraged21 said:
is there any other indications that sprint would be able to tell if it had water damage?
Click to expand...
Click to collapse
Nope, unless there is still water in it when you take it there, oh and don't use a hair dryer, all that does is "push" water in deeper through all the electrical wiring and circuits, plus it can melt parts of the device
Personal expierence lol

notsointeresting said:
Nope, unless there is still water in it when you take it there, oh and don't use a hair dryer, all that does is "push" water in deeper through all the electrical wiring and circuits, plus it can melt parts of the device
Personal expierence lol
Click to expand...
Click to collapse
+1 to not using the hairdryer . It will not work as well as you think. There's a good chance that you still have moisture in the device.

See I wouldn't have known that lol. Thankss!

Why we're here.

Enegry drink + tf101 = A bad situation

Hey everyone
My poor transformer has seen better days, here's the deal
I had a can of energy drink in my bag and it decided to open its self and left a puddle of liquid at the bottom of it, sadly that's where my transformer was. after a few hours of drying with a hair dryer I turned it on and surprisingly it turned on and is working fine other than the left hand side of the screen is now brighter the then the right (here's a picture of the screen https://www.dropbox.com/s/ci6m1y4abh8n0z6/IMG_20120731_113759.jpg). I rung asus and apparently gonna cost $300 + nz because they only replace the whole LCD panel which is far to much. touchscreen, volume rocker(volume rocker side got wet) etc all work fine (Im typing this off it now). Just want to know if anyone has any ideas about fixing it .
Cheers

Almost looks like it's still not dry yet you should have put it in a zip lock bag with rice right away

xstokerx said:
Almost looks like it's still not dry yet you should have put it in a zip lock bag with rice right away
Click to expand...
Click to collapse
If i had enough rice i would lol, Its been sitting under a heat pump for a few hours and nothing has changed with the screen . Im a complete noob with lcd's but it almost looks like drink has reacted with some layer on the lcd, its gone slightly transparent down the bottom of the screen where the back lighting is. heres a better photo: https://www.dropbox.com/s/srhe70sumk34e63/IMG_0241.JPG
cheers

JoinTheRealms said:
If i had enough rice i would lol, Its been sitting under a heat pump for a few hours and nothing has changed with the screen . Im a complete noob with lcd's but it almost looks like drink has reacted with some layer on the lcd, its gone slightly transparent down the bottom of the screen where the back lighting is. heres a better photo: https://www.dropbox.com/s/srhe70sumk34e63/IMG_0241.JPG
cheers
Click to expand...
Click to collapse
You should have waited for few days before you turned it on... hair drier will dry out the moisture from outside, so what about inside ? So turn it off and let it dry out..... also don't over heat it, you might melt the plastic
Sent from my Transformer TF101 using xda app-developers app

udupa82 said:
You should have waited for few days before you turned it on... hair drier will dry out the moisture from outside, so what about inside ? So turn it off and let it dry out..... also don't over heat it, you might melt the plastic
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
lol i accidently turned it on trying to get the bezel off, then stripped the screw so now its gonna be a mission trying to get it open lol , i thought i had killed it when i saw it booting up but I left it and it's working fine so far i thought if i leave it running it might start drying it out internally. Im gonna probably try claim insurance on it so anythings worth a try atm lol

Is it worth claiming insurance (then getting an insurance raise) vs getting a new one if it is broken? Good luck, I wouldn't dry it with heat... just soak it in rice because the rice will soak it up..

asdfuogh said:
Is it worth claiming insurance (then getting an insurance raise) vs getting a new one if it is broken? Good luck, I wouldn't dry it with heat... just soak it in rice because the rice will soak it up..
Click to expand...
Click to collapse
Yeah gonna see how much excess etc will cost first,hair dry was making slight progress which is good but i'm trying the method here (http://chathuraw.wordpress.com/2009/04/16/rescuing-a-water-damaged-laptop-display/) hopefully ill see some results, id do the rice method but i believe only a small amount of liquid managed to get in, there just seems to be a bit of moisture on the back of the LCD panel.

Definitely try and get it open, possibly give it a rinse. The sugar and crap in the energy drink would eat away at bits you don't want to be eaten away.
If you were in Dunedin I'd do it for you, had my 101 open a few times, and recovered lots of stuff that's had **** spilled on it

neoprint said:
Definitely try and get it open, possibly give it a rinse. The sugar and crap in the energy drink would eat away at bits you don't want to be eaten away.
If you were in Dunedin I'd do it for you, had my 101 open a few times, and recovered lots of stuff that's had **** spilled on it
Click to expand...
Click to collapse
Cheers man , I got one of the screws out but the other is starting to strip so i want find a proper sized Allen key before i ruin it completely lol, Is there anything specific you would recommend rinsing it with?

JoinTheRealms said:
Cheers man , I got one of the screws out but the other is starting to strip so i want find a proper sized Allen key before i ruin it completely lol, Is there anything specific you would recommend rinsing it with?
Click to expand...
Click to collapse
Distilled water if you can find it. Bottled water at a pinch. Under no circumstances use Christchurch tap water

neoprint said:
Distilled water if you can find it. Bottled water at a pinch. Under no circumstances use Christchurch tap water
Click to expand...
Click to collapse
Sweet as, ill see how insurance goes, if its not worth it ill rip it open and give it a clean. Cheers

Well you could try it with alcohol. I do it quite often with water damaged phones.
You turn the pad off open your TF101 - here I have to mention that I have never open a Transformer so I can't help you with that - if possible you remove the battery, protect the display and brush the damaged parts with something high in alcohol content (my drugstore has a 98% ethanol)
The idea with distilled water can help sometimes but I experienced often that it just worsen sharply

ProxiStyx said:
Well you could try it with alcohol. I do it quite often with water damaged phones.
You turn the pad off open your TF101 - here I have to mention that I have never open a Transformer so I can't help you with that - if possible you remove the battery, protect the display and brush the damaged parts with something high in alcohol content (my drugstore has a 98% ethanol)
The idea with distilled water can help sometimes but I experienced often that it just worsen sharply
Click to expand...
Click to collapse
Ive been looking at exploded pictures of the tf101 and I dont think it would have managed to get into the circiuty but ill open it up just to make sure. I was thinking rubbing alcohol might do the job, im waiting for the screen to return to normal its about 50% better then it was which is good, once that's back to normal im gonna try get it open, its a mission because i was panicking trying to get it open when i first done it and i threaded the screw so i gonna try super glue an allen key to the screw and try to get it out like that lol
Cheers

I dropped my phone in the toilet, how do I dry it quickly

I was making a video trying to do a prank on my friend, and it just slipped out of my hands. It was in there for around 5 seconds and was completely soaked. I put it in a bag with rice, but that's pretty much all i know how to do.
Is there any other things I should be doing to make the phone dryer?
Thanks for your time.
Heres the video: http://www.youtube.com/watch?v=92FKug77YKA
I havent tried to turn it on yet, the sd card works via card reader though, i guess thats good.

starxgamingx said:
I was making a video trying to do a prank on my friend, and it just slipped out of my hands. It was in there for around 5 seconds and was completely soaked. I put it in a bag with rice, but that's pretty much all i know how to do.
Is there any other things I should be doing to make the phone dryer?
Thanks for your time.
Click to expand...
Click to collapse
You may get it done using a hair dryer, using caution though, but it will still have internal water present, best would be to get a ziplock bag, 1/2 full of white rice....place the phone in there for 24-48hrs, it will absorb pretty much all the moisture. time will be the issue...
do not rush it.

Well...just leave it in for a few DAYS and hope for the best...not one day but a FEW...just cause it appears to be dry doesn't mean everything inside is dry yet
Good luck
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4

mg2195 said:
Well...just leave it in for a few DAYS and hope for the best...not one day but a FEW...just cause it appears to be dry doesn't mean everything inside is dry yet
Good luck
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
and make sure you do not try and turn on to soon, it may damage it further...

TheAxman said:
and make sure you do not try and turn on to soon, it may damage it further...
Click to expand...
Click to collapse
The best option is to go ahead and diassemble it and clean everything with high grade Isopropal alcohol. Even if it's not 100% alcohol it's better than the water thats in there. Also, tap water has chemicals and minerals in it that will stay behind when the water is gone that will short out all kinds of things on the boards. These need to be rinsed off so that when you do energize it, no harm will be done. No way would I allow it to dry without flushing everything first.

Do the rice trick first. Make sure you wait 48hrs at least before power-on. If that doesnt work you will have to try taking it apart.

I left my s2 hanging on a heater vent for the whole night a year ago when that happened to me. I dropped it in a sugary drink so it was worse , had to wash the charging port with distilled water before hanging it on the vent. Another time I had my phone in my pocket while walked into the ocean on the beach, that phone was a goner for obvious reasons.
Sent from my SGH-I337 using xda app-developers app

I have done this with two different phones (a Nokia N95 I dropped in a cup of coffee and an Inspire 4G on a pool) and got life from the phones for a couple of years after it happened, basically they keep working until I replaced them.
Remove the battery immediately, go and buy distilled water and submerge the phone to flush the impurities that got into the phone; for the N95 I dropped in coffee I repeated the process about 5 times until the water was clear, the one in the pool just a couple of times.
Rinse it, do not use a hairdryer as the heat can losen some stuff inside, put it on rice for as long as you can (I waited a full week).
Done!, YMMV but this was my solution to flush impurities without disassembling the phone.
I hope it helps, good luck.

i have used 98% alcohol to flush out any water because it doesn't attract any electricity. then i put it in a bag of rice for 1 day and it worked. (so to speak you and still use the phone when submerged under the alcohol. i made a video of it with an older flip phone)

Just get a new one it was in 5he toilet for heaven sakes
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

starxgamingx said:
I was making a video trying to do a prank on my friend, and it just slipped out of my hands. It was in there for around 5 seconds and was completely soaked. I put it in a bag with rice, but that's pretty much all i know how to do.
Is there any other things I should be doing to make the phone dryer?
Thanks for your time.
Heres the video: http://www.youtube.com/watch?v=92FKug77YKA
I havent tried to turn it on yet, the sd card works via card reader though, i guess thats good.
Click to expand...
Click to collapse
Like everybody else is saying take the battery out, and put the phone, and the battery in a bag full of rice. Wait 3-4 days and it should work. A hair dryer alongside that may not be a bad idea, and if u ever get it working, u might want to look into getting a case.

deron37129 said:
Just get a new one it was in 5he toilet for heaven sakes
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I agree. Not sure I would want it up against my face again even if its completely cleaned.

You know what's annoying?
It's when your non-technical friend on Facebook asks the public for assistance when they get their phone wet.
And you tell them to leave it in a bag of rice for 48 hours.
So they leave it in for 12 hours and then say everything is fine because it turns on now.
Ummh, hello. The 48 hours is not simply to get your phone to a point where it turns on. It's also to get as much of the remaining moisture out as possible, because EVENTUALLY the rest of the water is going to start corroding the phone internals and cause flakey problems down the road.
Sorry OP, I just found your thread a perfect opportunity to give a mini-rant.
ps. If it were my phone, I'd first do an isophrophy bath.

Place it in the microwave.

Zamdam1 said:
Place it in the microwave.
Click to expand...
Click to collapse
I can't tell if you're being serious or not but that is _not_ helpful, and if it isnt obvious do NOT ever do that with anything metal. I know I'm new here but serious replies only please FFS. I know plenty of people that have done this and the rice trick (with alcohol or distilled water flush as recommend previously in the thread if necessary) will work if anything does. Time and patience!

xerythul said:
I can't tell if you're being serious or not but that is _not_ helpful, and if it isnt obvious do NOT ever do that with anything metal. I know I'm new here but serious replies only please FFS. I know plenty of people that have done this and the rice trick (with alcohol or distilled water flush as recommend previously in the thread if necessary) will work if anything does. Time and patience!
Click to expand...
Click to collapse
You know plenty of people who have dropped their phones in the toilet? Crazy..
I was joking btw. I never said to turn the microwave on, I just said to place it in the microwave..
You could just take out the battery and make sure it is completely dry. Then you could get a hair dryer and if it has a cool button, you could try that. or a can of air or an air compressor..
It just takes time.. let it sit there for a week and then try it.. If it doesn't work, then maybe you should get one of those lifeproof cases.. would've saved you on this one..

Heh alright fair enough. I read it and said out loud WTF? but yes, my friends are terrible with their phones I dont know why. Good luck with your phone OP, let us know how it works out for you.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app