I just installed the new Intel Joying unit today and so far it's a great piece of equipment. Everything seems to work fine so far including my old elm OBDII adapter.
What I can't figure out is where the button light settings are. I've been through every screen on this thing multiple times and can't find it. I've even looked through their help manual that is built into the radio and no mention of it anywhere.
Also, I cannot find out where to change the car logo for when the radio boots up. Did these 2 features not make it into the new version?
Anyone know the password for developer mode and that other protected screen? Maybe it is buried in there?
So, the button light color option does not even show up in the settings menu unless the running lights are turned on in your car.
It's funny to see the option on the menu appear and disappear as I turn the lights on and off. How confusing and strange.
Still looking for the car logo option.
Yeah that "Lantern Color" option is tricky. It won't show up in settings if you don't have voltage on the illum wire. "Backlight Control" set to "Time Control" during daylight hours will also hide it.
Password for advanced settings was changed from 126 to 3368. "Car Brand Logo" is in the 3368 menu.
That worked. Thanks!
Related
Hi everybody.
I recently installed Pocket Bluetooth Tools on my M1000 and overall I find the utility excellent. I sync my M1000 at both home and work so removing the necessity to rebond everytime is excellent. Additionally, enabling a 60 sec Bluetooth period before switching off is also a handy facility.
However, I have one query.
The developper describes a Profile 1 and Profile 2, both of which are visible on the Today plugin screen, which can be user-defined to such options as "bluetooth always on" or "bluetooth switches off after 60 seconds" etc.
This would be handy to use however to date, I have found no method of actually accessing a "profile editor tool" or something similar. There's no Pocket Bluetooth Tools icon in either Programs or System, I can find no executable file on m M1000 anywhere so I now find myself in a position where I cannot turn Bluetooth on for more than 60 seconds unless it's doing something.
Any ideas? I've tried emailing the developper but with no response to date.
F
Just put it on #1 then adjust the power settings for the screen etc, and click on the little clock on the Today screen. This will make the bluetooth stay on when the clock is greyed out.
Switch to number two and adjust the power settings for the screen etc and you will have two different power settings.
dewild1 said:
Just put it on #1 then adjust the power settings for the screen etc, and click on the little clock on the Today screen. This will make the bluetooth stay on when the clock is greyed out.
Switch to number two and adjust the power settings for the screen etc and you will have two different power settings.
Click to expand...
Click to collapse
Cheers for that. It really is that simple. My mind works too technically sometimes!
F
Hi All
I have been reading these forums and generally googling day and night trying to work out what went wrong but haven't been able to solve it so far.
So by means of context I bought an android HU (Brand: Andream EW822P8QH) from aliexpress and was working flawlessly until about two weeks ago.
Details can be found aliexpress dot com /item/Octa-Core-2G-RAM-32G-ROM-Car-DVD-Player-Stereo-Android-7-1-Navigation-BT-For/32834839813.html?spm=a2g0s.9042311.0.0.3da24c4dDGESm4
It's running 7.1.2 and was running the CarWebGuru launcher, when apparently it asked for an update.
Since then, none of the physical buttons work. I've lost all steering wheel controls, so am now just reliant on the touch screen itself, so cannot control volume, etc.
Reading all forums, I understood that under Settings - Car Settings - Steering Control settings should allow you to reconfigure all the buttons once again. Unfortunately when I try to load it, the screen goes white, then goes back to the start of the Setting menu. (Interesting, I had a short cut to Steering Controls on my desktop, but again when I launch it, screen goes black then, back to the desktop
I thought there was something in Settings - Car Settings - Extra Settings, by pressing the code 123456, but once again the screen goes white and seems to go back to the start.
It just seems as though, both these settings areas are corrupted/ gone now.
Can anybody provide me with any clues on what I can get this working again?
Happy to do a factory reset, but nothing seems to happen through the Setting menu.
Was thinking is it even possible to install a new ROM etc. I would say while I've done this on my phone, never on a head unit so welcome any advice on which ROM and some guidance on steps.
Oh I can access the Settings - Dev Options by entering the code 7890 so do let me know if you want me to look at anything there. Interesting one last symptom, my navigation menu bar (by swiping down from top of the screen) no longer works., so definitely seems like something buggy is going on.
Thanks in advance to all who reply.
Hi,
I've bought a new Head Unit, and I wired everything on the car.
It's working like a charm, but, there a big but.
The Head Unit which should go to sleep / deep sleep or whatever when I remove my car key after 30 seconds, stays on.
For the time being I've unpluger the ACC cable (the red wire) so that the Head Unit only receives power when the car key is plugged in.
Do you know why am I facing this Issue and how to resolve it ? I had hope to enjoy a fast boot and not a full boot everytime I use my car.. it would be nice
I have another question also, if you know about it, I'm trying to get the light buttons always on, because they're not very visible to me. Si I went to the special menu (with the 126 code) and tried changing the parameter "Power LED control" to "By Power" instead of "By head light" but they still won't turn on unless head light is on. Am I missing something ?
I'm not sure what head unit you have but a) what is your amp wire from the head unit connected to? B) there's is usually an illumination wire, what is that connected to?
Sent from my SM-G950U using Tapatalk
Also do not know what head unit you have but it sounds like it is not wired up correctly.
If you dont get much help on these forums maybe go visit an auto electrician as they should be able to advise further.
anyone ever used this unit or one similar from the manufacturer? the problem I have is if i change android settings unless i make the unit to a reboot from the notification bar if won't hold the setting when the key is turned off and back on it doesn't even resume playing music automatically.
Hello,
The other night I was messing with my HU sold\made by XY Auto and the model is the 8227L_Demo. I must have cleared something in the factory settings because now my on screen climate controls are not showing. I would try to perform a recovery on the unit but it seems there is not any way to get into the recovery. My physical climate controls on the chassis still work. Picture attached of the entire unit I purchased back in 2018. All in all I think I messed something up with the CAN BUS in the software? All the wiring is still connected properly and no damage.
Anyone have any experience with this and maybe know how I can fix it? Anyone know how to get the unit into recovery mode? For recovery mode I've already tried disconnecting the power from the HU, holding in the Reset button while plugging the power back into the HU (I did have the ACC turned on while doing this) still no recovery mode. I also checked for a chip? C7 or something like that on the MB but I could not find it do to a short out as some others have stated it works on their HU's/
When I go into the Car Settings Menu, I logged into Factory Settings and I Properly set the CAN Set to Honda. I then went back out of the Factory Settings and then went into Car Settings where it says to "set in car". I pressed that button and then I get a message of "No Original vehicle settings function"
Any help, guidance, etc. is greatly appreciated and thanks in advance.
(I emailed XY Auto 2 days ago and no response from them yet)
From reading the posts, what has been considered and tried.
What do you want out of xda
Are you sure you have selected the correct CanBus type (e.g Bagu, AnyYuan, etc)? I doubt you will get a response from XY Auto as these 8227L units are for the most part unbranded generic head units. Have you tried contacting who you bought the head unit from (the reseller)?