I flashed Xnote over my stock N900W8 (Canadian Note 3) ROM and of course I lost my Canadian CSC. Have flashed it back with Odin multiple times with no success. I flash the Modem and CSC with Odin 3.09 and when I reboot it's like I did nothing at all. No changes. Cannot even select Rogers in CSC changer.
Completely lost at this point. I've followed instructions as well as I could. I am on limited bandwidth so I cannot download **** all, really sucks. Making my life hell actually, I managed to get the Canadian Rogers 4.4.2 AP and a Canadian Rogers CP and a Multi Canadian CSC, flashed them all and nothing. Reverts back to stock but with a UK CSC.
As soon as the flash of the CSC is done it boots recovery and wipes cache. Like I said, lost.
ANY info would be helpful, really want my Canadian CSC back.
nexxusty said:
I flashed Xnote over my stock N900W8 (Canadian Note 3) ROM and of course I lost my Canadian CSC. Have flashed it back with Odin multiple times with no success. I flash the Modem and CSC with Odin 3.09 and when I reboot it's like I did nothing at all. No changes. Cannot even select Rogers in CSC changer.
Completely lost at this point. I've followed instructions as well as I could. I am on limited bandwidth so I cannot download **** all, really sucks. Making my life hell actually, I managed to get the Canadian Rogers 4.4.2 AP and a Canadian Rogers CP and a Multi Canadian CSC, flashed them all and nothing. Reverts back to stock but with a UK CSC.
As soon as the flash of the CSC is done it boots recovery and wipes cache. Like I said, lost.
ANY info would be helpful, really want my Canadian CSC back.
Click to expand...
Click to collapse
No one?
nexxusty said:
No one?
Click to expand...
Click to collapse
you need to flash stock canadian rom with odin......
How to flash the firmware (5 files in archive) to your s7edge?
AP, CP & BL I understand, but the 2 CSC-files...?
CSC -> there's a PIT inside and will wipe your device
HOME_CSC -> the data should stay on your device
Today I tried to update with HOME_CSC, everything was OK, but at the end Odin 3.10.7 FROZE at "meta-data" (this folder is in the HOME_CSC file): nothing happened anymore and I had to pull the cable
Smart Switch didn't recognize my S7edge anymore for the "Emergency Firmware Repair"!
Luckely, Odin did recognize my device and could install the firmware with the "normal" CSC-file and afterwards my device was reset...
I hope someone has a solution on this, because I don't want to install everytime again and again...
+1
same happened to me. I have the same question...
cristy78 said:
+1
same happened to me. I have the same question...
Click to expand...
Click to collapse
How did you get your device working again?
henklbr said:
How did you get your device working again?
Click to expand...
Click to collapse
Well, the flash went just fine. No problems except the device reset at factory settings. As brand new one....
But of course I would like to know how to flash without resetting the device.
I had the same problem yesterday when used Home_CSC... flashed again with normal CSC and went back to normal with a formated user data
We really need a solution to that... What would happen if we skipped the CSC file when flashing thru ODIN?
Flashing with CSC and not home_CSC will also reset your CSC.
Eg: I was on VODAFONE Romania and flashed stock unbranded using CSC. The result was I lost my ROM (from Romania) CSC, and defaulted to XEO from the multi CSC.
In this situation you cannot go back to your original CSC even after flashing using Smart Switch.
Rooting is the only option then and that will trip Knox.
Sent from my SM-G935F using Tapatalk
anybody figured this out?
Just had the same problem flashing with HOME_CSC it got stuck in ODIN and had to pull the cable.
Had to turn off phone and boot again in download mode to flash again with a straight CSC.
insaned said:
Just had the same problem flashing with HOME_CSC it got stuck in ODIN and had to pull the cable.
Had to turn off phone and boot again in download mode to flash again with a straight CSC.
Click to expand...
Click to collapse
Have a look at this thread:
OFFICIAL STOCK Firmware-update (Odin) thread Samsung GALAXY S7Edge SM-G935F
henklbr said:
Have a look at this thread:
OFFICIAL STOCK Firmware-update (Odin) thread Samsung GALAXY S7Edge SM-G935F
Click to expand...
Click to collapse
Thanks for the heads up. good job
What is the benefit of flashing Home_CSC instead of just CSC?
BCSC said:
What is the benefit of flashing Home_CSC instead of just CSC?
Click to expand...
Click to collapse
+1 for that question...
If some can clear us out whats inside of both files and diffrences it would be great ...
V_B said:
+1 for that question...
If some can clear us out whats inside of both files and diffrences it would be great ...
Click to expand...
Click to collapse
CSC contains an instruction that allow Odin to wipe the DATA
Code:
--update_package=CACHE:recovery/sec_csc.zip
--carry_out=csc_factory
--wipe_data
HOME_CSC contains instruction only to allow wipe of cache BUT the original HOME_CSC can cause Odin to freeze at the end of the flashing process.
Code:
--update_package=CACHE:recovery/sec_csc.zip
--carry_out=csc_home
--wipe_cache
That's why you need to modify the HOME_CSC using the CYGWIN tool.
Just dont flash the home csc. I never did it. Everything work greats.
mercifool said:
Just dont flash the home csc. I never did it. Everything work greats.
Click to expand...
Click to collapse
HOME_CSC is supported on Odin version 3.11 or later. It's okay to flash it now.
Sorry to revive this thread but when a downgrade is done from Nougat back to Marshmallow a factory reset via recovery must be required if flashing HOME_CSC. Otherwise just use normal CSC on downgrade.
thank you
Samsung S6 Active G890A
Hello,
Where do I find a HOME_CSC file for Samsung S6 Active SM-G890A device?
HI.
I have 935F I bought with the CSC TPA.
I flashed a new firmware with another CSC, and now the CSC of my phone is empty (Recovery says multi-csc).
I flashed via odin AP. Do I need also to flash the CSC file in odin?
What is the solution to get the new CSC?
Thanks!
I have flashed nougat via odin without csc. My csc info shows nothing now. Will it make any problem or what if i flash csc only via odin?
Sent from my SM-G935F using Tapatalk
u have to flesh bl ap cp from n rom and ur hone csc or csc via doin
I dont understand..
Hello.
I got atm nougat with PLS csc, and want to flash with odin oreo with xeo csc. In odin when selecting BL AP CP and CSC ( not home_csc ) it always stop at set partition... Clicking repartition didnt help eaither.
And when I select home_csc - it skips all BL AP CP after phone turn on like after reset like nothing changed
sanderg said:
or the workaround until a new Odin tool is live.
Click to expand...
Click to collapse
Look
The fix is here https://forum.xda-developers.com/galaxy-s8+/how-to/guide-how-to-flash-crap-using-odin-t3748555/page3
I do have problems - Wifi and BT can't be enabled. So I want to reflash Stock Rom.
In the manual at sammobile.com is mentioned to flash 4 partitions, AP, BL, CP, CSC - but in the download zip file there is no CP file (Modem/Radio).
I assume a reflash of CP might useful to recover Wifi/BT. How to get this file? Anything else I can do?
In the stock firmware there should be 4 files. I have this tab and have flashed OS without any problem. While downloading the firmware pls, Check the region and build number.