Bought this to make into a rooted note 4. Not my main phone yet, I have an AT&T version.
Attempted to root following the directions on CFROOT, that got me to this point. Now have spent 2 days searching for solutions and trying things. No progress!
In download mode Using Odin 3.9 and 3.10.7 the CFROOT file report success but stuck in recovery booting. Attempting to reinstall the entire firmware Odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Any help would be greatly appreciated!
John
I treid to Root a T-Mobile version
Not the AT&T version. The AT&T version is my main phone now. I like the Note 4, But want a rooted version. See the above post about the failed Root.
dylistn said:
Not the AT&T version. The AT&T version is my main phone now. I like the Note 4, But want a rooted version. See the above post about the failed Root.
Click to expand...
Click to collapse
This method for n910t
1,Flash twrp recovery in odin
2,Boot into twrp by pressing volume up+home+power buttons together.
3,flash supersu.zip latest version from twrp
Your phone may reboot couple of times so don't freak out its normal.
Thats it
You will have permanent root and your device will boot fine.
Twrp recovery below
https://mega.nz/#!DIFFVSpQ!bUCEAa-VRdkeT4VgMJ-4cUXuo-ZiYbihOSWiw6Ic_wo
Supersu below
https://mega.nz/#!XAsUjARJ!XqYZkle6wTarq1a8-zAnhwrbd4IdpzpJryNCAU3g9k4
Dont try this on AT&T it will not work and you may brick your device.
Thanks Dubai. But I did some thing wrong! On step 1 above Odin log file:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
Related
Am I doing anything wrong? Trying to fix install unknown sources app and wifi in Omega v21.
I used odin 3.04 (ran as admin) flashed exactly as described on the omega site, but it's always fail to flash in download mode. What am I missing? phone i9505 tmobile edition (baseband m919uvuamdl android 4.4.2 omega v21-xxufna5 kernal 3.4.0) what am I missing? This is the second time I try to flash bootloader or modem in download and it fails. Please help. wifi not working at all and settings (security) always fail to start. Also can't install/uninstall apps.
lorddy05 said:
Am I doing anything wrong? Trying to fix install unknown sources app and wifi in Omega v21.
I used odin 3.04 (ran as admin) flashed exactly as described on the omega site, but it's always fail to flash in download mode. What am I missing? phone i9505 tmobile edition (baseband m919uvuamdl android 4.4.2 omega v21-xxufna5 kernal 3.4.0) what am I missing? This is the second time I try to flash bootloader or modem in download and it fails. Please help. wifi not working at all and settings (security) always fail to start. Also can't install/uninstall apps.
Click to expand...
Click to collapse
In odin v3.09
1 choose CP for modem and choose the file u've downloaded.
2 flash modem in download mode minimum 3 times
3 after flashing modem boot the s4 to normal and wait for wifi to connect.
for bootloader
1 choose bl and choose the file u've downloaded.
2 Flash bootloader in download mode
3 u r ready to boot.
And one more thing after flashing modem let ur s4 start normal to home screen then after at flash bootloader.if previously ur s4 is on NA1 test build of kitkat then there is no need of bootloader for flashing.
And please post the messege output by odin.So the members can help you better..
odin 3.09 still fail to flash bootloader
OK, that didn't work, the first time I used odin 3.04 as instructed in the omega rom site on the v21 page.
This time I used odin 3.09 (see attached screen shot) and still no luck.
I have to admit, I am new to samsung, coming from htc, there is no bootloaders there.
Still no wifi and no way to access security settings and can't un-install many apps.
below is odin log. any way I can fix this?
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> modem.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> modem.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> modem.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> modem.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Ok no one replys...may be everyone is busy on there sammys?
What if u flash the bootloader first? Can u post the log odin messege.
Sent from my GT-I9505 using Tapatalk
Bootlaoder first is also a fail (screenshot below) and here is the log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Have u asked omega developer? Indie, I think, he's the developer!
Sent from my GT-I9505 using Tapatalk
debbuger said:
Have u asked omega developer? Indie, I think, he's the developer!
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
How do I reach him? I tried searching the forums but no luck. I commented on the blog and still no luck. How can I reach Indie?
Hi all,
Phone is soft bricked, I cant access the recovery, but can access the odin download mode.
The phone came with I337mvluamg1 firmware, Although when i try to reflash the phone with the stock firmware odin fails..
Im using Odin 3.07
And the I337MVLUAMG1 firmware from sammobile but i get this message from odin
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUAMG1_I337MOYAAMG1_I337MVLUAMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is day 4 with the phone soft bricked and it just wont budge, ive tried multiple different firmware versions, even back tracking. but nothing.
Any tips? suggestions?
Thanks
sdawg1010 said:
Hi all,
Phone is soft bricked, I cant access the recovery, but can access the odin download mode.
The phone came with I337mvluamg1 firmware, Although when i try to reflash the phone with the stock firmware odin fails..
Im using Odin 3.07
And the I337MVLUAMG1 firmware from sammobile but i get this message from odin
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUAMG1_I337MOYAAMG1_I337MVLUAMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is day 4 with the phone soft bricked and it just wont budge, ive tried multiple different firmware versions, even back tracking. but nothing.
Any tips? suggestions?
Thanks
Click to expand...
Click to collapse
Im now getting a pass from I337MVLUAMDJ in odin, but the phone still wont boot to recovery or the OS
Odin back to stock. Don't use what's in my description.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Make sure your trying to flash the same version of firmware.... if the phone was originally on 4.3 you can't flash back to 4.2. You can go up versions but not down... if the bootloader is 4.3 you can't get to 4.2
I tried flashing the stock firmware but it failed, but when i use a version above stock i get a pass from odin, the phone resets but when boots, gets stuck on the samsung galaxy s4 screen, and wont boot to recovery..or the OS....
sdawg1010 said:
I tried flashing the stock firmware but it failed, but when i use a version above stock i get a pass from odin, the phone resets but when boots, gets stuck on the samsung galaxy s4 screen, and wont boot to recovery..or the OS....
Click to expand...
Click to collapse
You need to keep trying to get into recovery. When you do, do a factory reset
Sent from my Nexus 5
So I went from Hyper RLS16 MJ7 to MK2 using odin, then used VZW OTA to go to NC5. Rooted, Installed Safestrap, then installed Hyperdrive RLS17 (on stock slot per sbreens instructions). For some reason I was having some weird Quirks and decided to try to flash NC5 in odin again using surges file, It started to flash (full wipe method with PIT file) and failed, so now I have the problem where it starts to flash, fails, the I jut re-partition and am able to get back into download mode, but Its gets up to ABOOT in odin, then fails. Here is the messages in odin:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> persdata.img.ext4
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
If anyone has any ideas, please let me know, I have tried going back to MK2, but I am assuming its locked out because it fails instantly.
Let me know if there is more info needed.
Verizon SCH-I545 Galaxy S4 NC5 baseband.
bradbb2009 said:
Let me know if there is more info needed.
Verizon SCH-I545 Galaxy S4 NC5 baseband.
Click to expand...
Click to collapse
Nope. No more info needed. you have to follow two easy steps to repair:
1. go here;
2. Ask your question in Q&A section.
sorry, but you posted in wrong S4 thread:highfive:
Bought this to make into a rooted note 4. Not my main phone yet, I have an AT&T version.
Attempted to root following the directions on CFROOT, that got me to this point. Now have spent 2 days searching for solutions and trying things. No progress!
In download mode Using Odin 3.9 and 3.10.7 the CFROOT file report success but stuck in recovery booting. Attempting to reinstall the entire firmware Odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Any help would be greatly appreciated!
John
dylistn said:
Bought this to make into a rooted note 4. Not my main phone yet, I have an AT&T version.
Attempted to root following the directions on CFROOT, that got me to this point. Now have spent 2 days searching for solutions and trying things. No progress!
In download mode Using Odin 3.9 and 3.10.7 the CFROOT file report success but stuck in recovery booting. Attempting to reinstall the entire firmware Odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Any help would be greatly appreciated!
John
Click to expand...
Click to collapse
You're in the wrong place. These are the S4 forums, not Note 4.
Anyway, AT&T devices have a locked bootloader and I don't think CF-Auto-Root can root those.
So you may have to find another solution to rooting.
But before that you may have to flash the stock firmware again, as the current one is messed up by the failed root flash.
Thank you
I thought I had the right forum. Can I move this to another forum. Or should I start a new thread and delete this?
dylistn said:
I thought I had the right forum. Can I move this to another forum. Or should I start a new thread and delete this?
Click to expand...
Click to collapse
It can be moved. Select the report option and as a reason select thread moving.
My phone was rooted before I downloaded and flashed the marshmallow firmware (28th Aug 2017 version). Now I am trying to root it, it just says FAIL.
I have tried both, the CF-Autoroot and the TWRP methods. No luck. Any help??
Below are the logs from Odin.
CF-Autoroot:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> cache.img.ext4
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
TWRP:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)