Am I doing anything wrong? Trying to fix install unknown sources app and wifi in Omega v21.
I used odin 3.04 (ran as admin) flashed exactly as described on the omega site, but it's always fail to flash in download mode. What am I missing? phone i9505 tmobile edition (baseband m919uvuamdl android 4.4.2 omega v21-xxufna5 kernal 3.4.0) what am I missing? This is the second time I try to flash bootloader or modem in download and it fails. Please help. wifi not working at all and settings (security) always fail to start. Also can't install/uninstall apps.
lorddy05 said:
Am I doing anything wrong? Trying to fix install unknown sources app and wifi in Omega v21.
I used odin 3.04 (ran as admin) flashed exactly as described on the omega site, but it's always fail to flash in download mode. What am I missing? phone i9505 tmobile edition (baseband m919uvuamdl android 4.4.2 omega v21-xxufna5 kernal 3.4.0) what am I missing? This is the second time I try to flash bootloader or modem in download and it fails. Please help. wifi not working at all and settings (security) always fail to start. Also can't install/uninstall apps.
Click to expand...
Click to collapse
In odin v3.09
1 choose CP for modem and choose the file u've downloaded.
2 flash modem in download mode minimum 3 times
3 after flashing modem boot the s4 to normal and wait for wifi to connect.
for bootloader
1 choose bl and choose the file u've downloaded.
2 Flash bootloader in download mode
3 u r ready to boot.
And one more thing after flashing modem let ur s4 start normal to home screen then after at flash bootloader.if previously ur s4 is on NA1 test build of kitkat then there is no need of bootloader for flashing.
And please post the messege output by odin.So the members can help you better..
odin 3.09 still fail to flash bootloader
OK, that didn't work, the first time I used odin 3.04 as instructed in the omega rom site on the v21 page.
This time I used odin 3.09 (see attached screen shot) and still no luck.
I have to admit, I am new to samsung, coming from htc, there is no bootloaders there.
Still no wifi and no way to access security settings and can't un-install many apps.
below is odin log. any way I can fix this?
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> modem.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> modem.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> modem.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> modem.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Ok no one replys...may be everyone is busy on there sammys?
What if u flash the bootloader first? Can u post the log odin messege.
Sent from my GT-I9505 using Tapatalk
Bootlaoder first is also a fail (screenshot below) and here is the log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Have u asked omega developer? Indie, I think, he's the developer!
Sent from my GT-I9505 using Tapatalk
debbuger said:
Have u asked omega developer? Indie, I think, he's the developer!
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
How do I reach him? I tried searching the forums but no luck. I commented on the blog and still no luck. How can I reach Indie?
Related
So I went from Hyper RLS16 MJ7 to MK2 using odin, then used VZW OTA to go to NC5. Rooted, Installed Safestrap, then installed Hyperdrive RLS17 (on stock slot per sbreens instructions). For some reason I was having some weird Quirks and decided to try to flash NC5 in odin again using surges file, It started to flash (full wipe method with PIT file) and failed, so now I have the problem where it starts to flash, fails, the I jut re-partition and am able to get back into download mode, but Its gets up to ABOOT in odin, then fails. Here is the messages in odin:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> persdata.img.ext4
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
If anyone has any ideas, please let me know, I have tried going back to MK2, but I am assuming its locked out because it fails instantly.
Let me know if there is more info needed.
Verizon SCH-I545 Galaxy S4 NC5 baseband.
bradbb2009 said:
Let me know if there is more info needed.
Verizon SCH-I545 Galaxy S4 NC5 baseband.
Click to expand...
Click to collapse
Nope. No more info needed. you have to follow two easy steps to repair:
1. go here;
2. Ask your question in Q&A section.
sorry, but you posted in wrong S4 thread:highfive:
Sold my phone on eBay, I had it rooting running SafeStrap on NB1 firmware. Thought it would be best to flash back to stock before shipping it. Used this ROM. Got various errors before deciding I had to repartition with this PIT file. Since then I have gotten the same error (in the title). Is this fixable or am I completely screwed?
Odin text:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Removed!!
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!
Click to expand...
Click to collapse
Update: Just tried a USB port on the motherboard rather than the front panel ports and got this:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
Click to expand...
Click to collapse
Is this good or am I even more screwed?
Update 2: Here's what I get when only flashing the MD5 without the PIT:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> persdata.img.ext4
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
Click to expand...
Click to collapse
Update 3: Was able to flash the MD5 I used in order to root. Tried again to flash the stock MD5 and got about as far as one can hope for but, again, faced the Complete(Write) operation failed.
Odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> persdata.img.ext4
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> NON-HLOS.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
Click to expand...
Click to collapse
After this point I was again able to restore the ROM I had before. So I'm guessing this points to the problem being within the MD5 I'm attempting to flash?
If you're not already, use the tar from here
http://forum.xda-developers.com/showthread.php?p=50912149
It could be a bad download of the file that is causing the problem. You also should not need the pit file. Use usb 2.0 ports, not 3.0 and try different ports and cable. Odin can be finicky.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
If you're not already, use the tar from here
http://forum.xda-developers.com/showthread.php?p=50912149
It could be a bad download of the file that is causing the problem. You also should not need the pit file. Use usb 2.0 ports, not 3.0 and try different ports and cable. Odin can be finicky.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks, I redownloaded the file from that link, used a different USB port, and finally I am successful!
windoge said:
Thanks, I redownloaded the file from that link, used a different USB port, and finally I am successful!
Click to expand...
Click to collapse
Glad you got it working!
Sent from my Nexus 5 using XDA Free mobile app
I tired changing USB ports it worked...
jd1639 said:
If you're not already, use the tar from here
http://forum.xda-developers.com/showthread.php?p=50912149
It could be a bad download of the file that is causing the problem. You also should not need the pit file. Use usb 2.0 ports, not 3.0 and try different ports and cable. Odin can be finicky.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thank a lot...
It worked after trying different ports...
Hello
I recently upgraded my samsung galaxy S5 (G900F) to android 5. I downloaded the firmware from sammobile a few weeks ago and it's been working great. Since I live in South Africa, the updates take quite a while to reach us, and finally they're here. I downloaded the original 4.4.2 firmware so that I can upgrade my firmware from the phone itself (Thinking it would be best that way). The version I'm trying to install is this-
"G900FXXU1ANG2_G900FOXE1ANI2_G900FXXU1ANG2_HOME.ta r.md5"
That's the name of the md5 file I'm using. When I click "Start" in Odin, it takes a few minutes to do a few things and then all of a sudden:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANG2_G900FOXE1ANI2_G900FXXU1ANG2_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Ext4)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone screen it says:
ODIN: Invalid ext4 image
Please help!!
I successfully downgraded back to 4.4.2.
Ensure that you are not using an USB HUB nor other cable than original...
S5 tends to be a little stuborn on that LOL
Bought this to make into a rooted note 4. Not my main phone yet, I have an AT&T version.
Attempted to root following the directions on CFROOT, that got me to this point. Now have spent 2 days searching for solutions and trying things. No progress!
In download mode Using Odin 3.9 and 3.10.7 the CFROOT file report success but stuck in recovery booting. Attempting to reinstall the entire firmware Odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Any help would be greatly appreciated!
John
I treid to Root a T-Mobile version
Not the AT&T version. The AT&T version is my main phone now. I like the Note 4, But want a rooted version. See the above post about the failed Root.
dylistn said:
Not the AT&T version. The AT&T version is my main phone now. I like the Note 4, But want a rooted version. See the above post about the failed Root.
Click to expand...
Click to collapse
This method for n910t
1,Flash twrp recovery in odin
2,Boot into twrp by pressing volume up+home+power buttons together.
3,flash supersu.zip latest version from twrp
Your phone may reboot couple of times so don't freak out its normal.
Thats it
You will have permanent root and your device will boot fine.
Twrp recovery below
https://mega.nz/#!DIFFVSpQ!bUCEAa-VRdkeT4VgMJ-4cUXuo-ZiYbihOSWiw6Ic_wo
Supersu below
https://mega.nz/#!XAsUjARJ!XqYZkle6wTarq1a8-zAnhwrbd4IdpzpJryNCAU3g9k4
Dont try this on AT&T it will not work and you may brick your device.
Thanks Dubai. But I did some thing wrong! On step 1 above Odin log file:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
My phone was rooted before I downloaded and flashed the marshmallow firmware (28th Aug 2017 version). Now I am trying to root it, it just says FAIL.
I have tried both, the CF-Autoroot and the TWRP methods. No luck. Any help??
Below are the logs from Odin.
CF-Autoroot:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> cache.img.ext4
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
TWRP:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)