Database Users

Help bricked my p8 lite

i tried rooting my phone huawei p8 lite but got stuck at installing super su now i cannot start my device ..i cannot boot into flash mode or recovery ..i need help ...it wont even charge

pepeline said:
i tried rooting my phone huawei p8 lite but got stuck at installing super su now i cannot start my device ..i cannot boot into flash mode or recovery ..i need help ...it wont even charge
Click to expand...
Click to collapse
What's your build number what version of supersu did you try to flash?
Shutdown your device, put your current build onto 'dload' folder in the sdcard and press the following key combo: POWER, VOL-UP & VOL-DOWN, it should enable automatic update process

amageek said:
What's your build number what version of supersu did you try to flash?
Shutdown your device, put your current build onto 'dload' folder in the sdcard and press the following key combo: POWER, VOL-UP & VOL-DOWN, it should enable automatic update process
Click to expand...
Click to collapse
My phone restarts right at the logo when i press power vol up and vol down

pepeline said:
My phone restarts right at the logo when i press power vol up and vol down
Click to expand...
Click to collapse
Shut it down amd press those 3 keys combo.. upon seeing Huawei Logo and vibration, release the Power key while holding the other 2... That ought to do it

Man, your phone is badly bricked. If you don't have at least access to fastboot, then you're screwed.

Good for me to I have the same problem. I was trying to get to stock ( I have made it several times), but the last time was a fail... The whole process of sending firmware was ok. then a reboot and brick.
Now the huawei screen and the short vibration appears and shutdown.
I was trying everything.
In device manager the phone is displayed as mobile devices \ volume f:\ (drive letter)
in connected devices the phone is detected as
hi6210sft
Phone is not detected in fastboot or ADB.

I met this problem yesterday(I hope the identical ). Because I have two booting animations, one from Vodafone, I guess I shutdown early during installation. It just froze. Then it didn't boot and stock recovery didn't help
My solution needs some recovery software like twrp. Press three buttons at the same time until twrp mode. Copy zip file for SuperSU to phone or sdcard, then flash it. After that my phone works again.
You mentioned that you cannot start recovery. Try more. After installing twrp, starting it is quite annoying. Sometimes it just doesn't start or stock recovery starts. An alternative way is to go to whatever mode, and try adb or fast boot to reboot to recovery. Pressing button requires techniques which j don't have

I can't enter TWRP non combination is working for me. Installing firmware using dload from sd card also.

okay if non of these worked you can try flashing the whole update.app file by fastboot..
tools you will need
1- download the official huawei firmware from the official site
2- download Huawei Update Extractor
3- download minimal adb and fastboot
check the unbricking chapter of this thread
Note: to get in fastboot make sure you connected your phone to computer and press the vol down and power down buttons.. if none of these worked your phone is hard bricked .-. .. try opening the phone and reconnecting the battery worked with someone
if you need any help just pm me or replay on this thread hope that help you

Ok thx. I have already opened the phone to reconnect the battery
And then I was trying the combinations;
Battery connected vol- +power - Huawei logo and vibration and shutdown, no fastboot
Battery disconnected, vol-+power and connecting cable to phone - the same
Battery disconnected combination vol + vol - + ppwer, with sd card dload, the same
Battery connected combination vol + vol - power, sd card dload, the same
Any other suggestions?
The phone is recognized in Windows in device manager as mobile device as volume with a letter, I cant change the drivers to the right ones. I can't enter the storage it's unrecognized format.

Any other suggestions?

mercom said:
Any other suggestions?
Click to expand...
Click to collapse
it is easy to suggest others.. I too advised you.. but today i am facing the same problem...
what I tried:
Reinstalling the same ROM using dload method
Upgrading to other ROM (using both dload and flashing 4 image method)
Downgrading
Restoring from the backup
At one point, the phone booted up all well except the Wifi Module... So I flashed another ROM and stuck again...

the worst thing that I don't have any connection to fastboot Each firmware installation method fails

mercom said:
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
Click to expand...
Click to collapse
yes, mine too... or I could say flashing succeeds but there's some problem with the boot partition... will get my phone today from the Customer Care and try again (if they can't repair).
you can try removing the back cover and unplugging the battery... that is one of the few things I will do today as I get my phone back..

mercom said:
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
Click to expand...
Click to collapse
ok made it back.. just flashed the boot.img from b594 (the one I was using when my mobile got bricked)... somehow made it back. But now I am having a problem with the battery. It doesn't charge when the device is switched on, only when the device is switched off... will see for few days, if there's problem will take it back to service centre again

I have already removed back cover and was trying to reconnect the battery to do clear run. But the only thing is discovered in windows is a driver for storage and I can't change the driver to ADB or FASTBOOT
Now I have connected phone w PC on adb devices I see only emulator-5554 device. In Device manager I see the storage as a Mobile Device.
Nope it was Bluestacks

mercom said:
I have already removed back cover and was trying to reconnect the battery to do clear run. But the only thing is discovered in windows is a driver for storage and I can't change the driver to ADB or FASTBOOT
Now I have connected phone w PC on adb devices I see only emulator-5554 device. In Device manager I see the storage as a Mobile Device.
Nope it was Bluestacks
Click to expand...
Click to collapse
Switch off your device and then connect it to PC but just hold the volume- key.. that should get you in fastboot mode... I did that and then flashed the boot.img of the current ROM. This should boot it up...

Nope it doesn't work I was trying it already

google account problem

hy. i have a big problem. i just bought a p9 lite and i couldn.t sing in with google account. On browser it works but when i press add new account(settings) at google nothing happends. at e-mail, exchange it works but not at google option. it doesn.t work at youtube, magazin play, google + etc also. after 3 hours of google.ing the problem is still there. anything else works fine. if you have any ideea i will try it. thanks.

You just bought the phone and did not root/modded right? You should try to do a factory​ reset, and if it does not work the Google Apps must be damaged. To fix it you have to download the original firmware and update with the dload mode:
-Extract the firmware from the zip (you can find download in the forum)
-Put the file UPADATE.APP in a folder named dload
-Copy the dload folder that contains the firmware to a micro SD and put it in your phone
-Make sure to have enough battery
-Open the dialer and type *#*#2846579#*#*
-Click on ProjectMenu -> Software Upgrade -> SDCard Upgrade
This should install the firmware to your phone.
If it does not work do in this way:
-With the dload folder in the SD card as before, shut down the phone
-While powered off, press Volume -, Volume + and power button all together and it will start the installation

Potato997 said:
You just bought the phone and did not root/modded right? You should try to do a factory​ reset, and if it does not work the Google Apps must be damaged. To fix it you have to download the original firmware and update with the dload mode:
-Extract the firmware from the zip (you can find download in the forum)
-Put the file UPADATE.APP in a folder named dload
-Copy the dload folder that contains the firmware to a micro SD and put it in your phone
-Make sure to have enough battery
-Open the dialer and type *#*#2846579#*#*
-Click on ProjectMenu -> Software Upgrade -> SDCard Upgrade
This should install the firmware to your phone.
If it does not work do in this way:
-With the dload folder in the SD card as before, shut down the phone
-While powered off, press Volume -, Volume + and power button all together and it will start the installation
Click to expand...
Click to collapse
i have a VNS-L31C150B161 bought from austria. i'm from Romania. the phone is not branded i could call, texting etc... i couldn.t find the original firmware . i tried the factory reset many time but doesn.t was succesfull.

i tried what you said but no luck. the problem is still there

geygeyone said:
i tried what you said but no luck. the problem is still there
Click to expand...
Click to collapse
I have had this issue and one of these worked every time :good:
Download latest update extract update. File create a folder called dload in your,. INTERNAL storage doing and copy update. App file to it. Doing so in sd card did not work for me personally turn off hold three buttons and let it update. Than just to be safe maybe follow steps below to get to e-recovery and factory reset than reboot.
If it rooted phone
download newest file and flash on twrp than reboot it wait few secs turn off phone hold vol up and than power button till you see the Huawei logo than let go your than in
e-recovery now factory reset and then wipe cache and reboot it will be successful if you are asked to input google details when u go through set up
Hope it helps it worked for me when had same issue

stevegtrlmk said:
I have had this issue and one of these worked every time :good:
Download latest update extract update. File create a folder called dload in your,. INTERNAL storage doing and copy update. App file to it. Doing so in sd card did not work for me personally turn off hold three buttons and let it update. Than just to be safe maybe follow steps below to get to e-recovery and factory reset than reboot.
If it rooted phone
download newest file and flash on twrp than reboot it wait few secs turn off phone hold vol up and than power button till you see the Huawei logo than let go your than in
e-recovery now factory reset and then wipe cache and reboot it will be successful if you are asked to input google details when u go through set up
Hope it helps it worked for me when had same issue
Click to expand...
Click to collapse
Where did you download the update from ?

https://forum.xda-developers.com/huawei-p9lite/development/stock-firmware-links-t3468245/page18
Scroll back to pages 1 and download

stevegtrlmk said:
https://forum.xda-developers.com/huawei-p9lite/development/stock-firmware-links-t3468245/page18
Scroll back to pages 1 and download
Click to expand...
Click to collapse
it installed but nothing changed

erader said:
thanks, i've downloaded it, but it says installing update and remains stuck on 5 %, do u know what the problem can be ?
Click to expand...
Click to collapse
Try a different update go back to b150 on this link here and it will work same procedure as described
https://boycracked.com/portfolio/vn...re-version-for-huawei-p9-lite-vns-l31-europe/
---------- Post added at 12:43 AM ---------- Previous post was at 12:39 AM ----------
stevegtrlmk said:
Try a different update go back to b150 on this link here and it will work same procedure as described
https://boycracked.com/portfolio/vn...re-version-for-huawei-p9-lite-vns-l31-europe/
Click to expand...
Click to collapse
I hope this does help I tried a few different versions with the three button dload method and it did work and restores my phone to 100 per cent it trial and error. In beginning I had trouble locking boatloads now can unlock relock in 2-3 mins flash roms.
If phone is unlocked flash with twrp use this kit of need to unlock very good and straight forward made by a member here also helpful chap for nooks like myself
---------- Post added at 12:45 AM ---------- Previous post was at 12:43 AM ----------
erader said:
it installed but nothing changed
Click to expand...
Click to collapse
:
This is about the extent of help I can offer if it don't work if you do a search you will find a similar thread and the more experienced members to get u back on track.
Unlock kit
https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873

For me absolutely nothing works. I.'ve installed the L31C432B161 but the problem is still there. Now it.show L31C900B161. I.'ve tried every method reader but with no success. I think the only solution for me is to root the phone but I.Don.t want to make this because is a new phone. until now I hope to solve the problem without that but my hope is lossed

Huawei p9 vns-l31 frp remove solution
Can anyone say please help me
Huawei p9 vns-l31 How to frp remove can do ?

Voice recognition instead of keyboard after hard reset on p9 lite

Hi all,
First I installed nougat via firmware search (or finder) app. After that I did hard reset and when it prompted me to login to google account I don't get keyboard popup but "Tap to speak" instead.
There is no way to switch it.
Erecovery didn't help because it says something like versions are not the same (I can check it again for real message if needed).
I also tried with recovering from sd card (download firmware to dload folder and then vol +, vol -, power button) and got "incompatible version" or smth similar.
Did anyone have this issue and if did, is there a solution?
Thank you

I never heard of such a problem... That is really strange.
Your best bet is to find a firmware that is flashable via three button method and look if the problem got solved.
If it does not work for whatever reason...
Unlock your bootloader and install TWRP.
Then you can maybe reflash GApps and see if it solves your keyboard issue.
The second method requires a BL unlock code though (not sure if you have it).

Schlengge said:
I never heard of such a problem... That is really strange.
Your best bet is to find a firmware that is flashable via three button method and look if the problem got solved.
If it does not work for whatever reason...
Unlock your bootloader and install TWRP.
Then you can maybe reflash GApps and see if it solves your keyboard issue.
The second method requires a BL unlock code though (not sure if you have it).
Click to expand...
Click to collapse
Thank you. I'll try wit several firmwares and then flash.

I am just informing that I tried with multiple firmwares and they all failed.
Next is flash.

Had the same problem, skipped connection with my wifi, did the setup and voice search Google keyboard, install it and then connect to my wi-fi via keyboard, did the roll back from Nougat to Marshmallow by flashing b300 update via 3 button method, download stock firmware also flash via 3 button method, that roll back also relocked my bootloader, my device is VNS-L31C185

Recover Huawei P9 EVA-L19C432 keyboard
Hello if you broke your Huawei P9 devices i explain how to rebuild and make your phone work without losing your warranty. Lets start:
THIS WORK ONLY WITH HUAWEI P9-EVAL19C432 ONLY WITH PHONE WAS INSTALL ANDROID 7.
THE OFFICIAL ROM CONTAIN THE KEYBOARD HUAWEI AND PROGRAM PACK.
1. You need an sd card 4 gb or largest to put stock firmware update.app on it.
2. Download rollback pack from here and official huawei p9 rom - europe
www point ftpbuzau point hi2 point ro/resurse/android
3. Create a folder on sd card with name: dload
4. Extract the HUAWEI_P9_Rollback Package and copy on card folder dload file update.app
5. Insert sd card on phone and press together VOLUM UP + VOLUM DOWN + POWER button. Phone now will start install the rollback pack. Rollback pack restore phone with a blank firmware code to accept the Android 6 stock rom.
6. After install complete the phone automatic restart after that remove the sd card and copy official rom on dload folder.
ATTENTION after restart please don't precedes wizard just power off phone. If you start install wizard of phone you don't see the keyboard only google voice activate and the official rom don't install huawei keyboard after that.
7 Copy the update.app from HUAWEI_P9_Firmware_EVA-L19 archive on dload card folder an press together VOLUM UP + VOLUM DOWN + POWER button firmware install will start. After reboot power off phone insert gsm sim card and power on phone. Now you can precedes to wizard configuration and the keyboard appear. After start check on system update ota and update your phone to EVAL19C432B210.
This procedure was test on HUAWEI P9-EVAL19C432 with ANDROID 7 after fail to update on EVAL19C432B386. The best rom with this phone is Android 6 EVAL19C432B210 I will recomande to you because the life of battery . Daily usage the phone keep on going 2 days.

thank you so much!!
you just save my life ,i did everything u said,and it worked, i was so worry
i finally with your help i fixed,thanks ,great work...
rohack said:
Hello if you broke your Huawei P9 devices i explain how to rebuild and make your phone work without losing your warranty. Lets start:
THIS WORK ONLY WITH HUAWEI P9-EVAL19C432 ONLY WITH PHONE WAS INSTALL ANDROID 7.
THE OFFICIAL ROM CONTAIN THE KEYBOARD HUAWEI AND PROGRAM PACK.
1. You need an sd card 4 gb or largest to put stock firmware update.app on it.
2. Download rollback pack from here and official huawei p9 rom - europe
www point ftpbuzau point hi2 point ro/resurse/android
3. Create a folder on sd card with name: dload
4. Extract the HUAWEI_P9_Rollback Package and copy on card folder dload file update.app
5. Insert sd card on phone and press together VOLUM UP + VOLUM DOWN + POWER button. Phone now will start install the rollback pack. Rollback pack restore phone with a blank firmware code to accept the Android 6 stock rom.
6. After install complete the phone automatic restart after that remove the sd card and copy official rom on dload folder.
ATTENTION after restart please don't precedes wizard just power off phone. If you start install wizard of phone you don't see the keyboard only google voice activate and the official rom don't install huawei keyboard after that.
7 Copy the update.app from HUAWEI_P9_Firmware_EVA-L19 archive on dload card folder an press together VOLUM UP + VOLUM DOWN + POWER button firmware install will start. After reboot power off phone insert gsm sim card and power on phone. Now you can precedes to wizard configuration and the keyboard appear. After start check on system update ota and update your phone to EVAL19C432B210.
This procedure was test on HUAWEI P9-EVAL19C432 with ANDROID 7 after fail to update on EVAL19C432B386. The best rom with this phone is Android 6 EVAL19C432B210 I will recomande to you because the life of battery . Daily usage the phone keep on going 2 days.
Click to expand...
Click to collapse

hi i'm a huawei P9lite (VNS-L31) user from South Africa, i need help with a roll back ,please help

P8 stuck at boot

Hi to everyone ^^
I have here a P8, stuck on boot with the "TIM" logo (operator). I can't even shutdown it.
Is not mine and I still need to know more information about which firmware it had before get this sort of brick, anyway...
I can't enter in recovery (Power-vol+)
I can't enter in EMUI mode ( Power- Vol+ - Vol -)
....BUT I can enter in fastboot&rescue mode.
I've already unlocked the bootloader and I can flash everything....but still, I can't get access to the recovery or EMUI mode T___T
Does exist a "Generic" firmware that works for unbrick this phone?
Do you have any suggest or link for some Recovery/Boot/Cust file?
Thanks in advance for any answers.

Hello , You are in hard step !
Install HiSuite on your PC and use Recovery Tools official Method from Huawei.

NAViDArt said:
Hello , You are in hard step !
Install HiSuite on your PC and use Recovery Tools official Method from Huawei.
Click to expand...
Click to collapse
Already tried.
This is the result...The device doesn't support system recovery.

Sorry for the multi-post T__T
Anyway this is my situation...I can just use the fastboot, or see the "Bootlogo" for the rest of my life......(or battery )

Have you tried a forced update by placing a full ROM named "Update.app" in a folder called "DLOAD" on the external SD card and then pressing and holding all three buttons ?

Yep, already done...
No response.
SD ready, power on the phone holding all three buttons, but nothing to do... it just start normally and get stuck on logo. =(

Softtm17 said:
Yep, already done...
No response.
SD ready, power on the phone holding all three buttons, but nothing to do... it just start normally and get stuck on logo. =(
Click to expand...
Click to collapse
Have a look at Dc Phoenix :-
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial

https://forum.xda-developers.com/huawei-p8/how-to/guide-how-to-unbrick-huawei-p8-failed-t3260704

$25 Paypal TO *YOU* for fixing VKY-L29 boot issues / possibly brick

Hey guys,
A friend of mine handed me a phone I used a few years ago - a Huawei P10+. The problem is, it won't boot. A friend offered a small bounty - so I thought I'd extend that small bounty to people here for immediate assistance. If you take Paypal, there $25 USD up for grabs if your links/instructions and assistance lead to unbricking - correct booting of the phone....
WHAT WE KNOW:
- VKY-L29 dual sim phone
- Previously been successfully rooted and was functioning fine
- Previous User may have tried wiping EVERYTHING (unsuccessfully, obviously) for re-installation of stock ROM
THE PROBLEM:
The phone displays the white/orange text screen, stating "Your device has been unlocked and can't be trusted. To learn more visit: http://zh.ui.vmall.com/emotiondownload.php?mod=restore
(1) Press power to continue .... nothing happens when pressed
(2) Press volume up for 3 secs to enter ERecovery to restore your device ... this works, but CANNOT download, or fails to download package over WIFI (only other options are to shutdown/reboot)
(3) Your device will continue to boot 5 seconds later if no operation ... nothing happens, it just hangs on this screen - even when prompt shows "Your device is rebooting now"
It doesn't matter if this stays rooted or not, we just need to successfully reinstall the STOCK ROM and booting/functioning normally.
Any assistance is appreciated.
Regards
RoOSTA

roosta said:
Hey guys,
A friend of mine handed me a phone I used a few years ago - a Huawei P10+. The problem is, it won't boot. A friend offered a small bounty - so I thought I'd extend that small bounty to people here for immediate assistance. If you take Paypal, there $25 USD up for grabs if your links/instructions and assistance lead to unbricking - correct booting of the phone....
WHAT WE KNOW:
- VKY-L29 dual sim phone
- Previously been successfully rooted and was functioning fine
- Previous User may have tried wiping EVERYTHING (unsuccessfully, obviously) for re-installation of stock ROM
THE PROBLEM:
The phone displays the white/orange text screen, stating "Your device has been unlocked and can't be trusted. To learn more visit: http://zh.ui.vmall.com/emotiondownload.php?mod=restore
(1) Press power to continue .... nothing happens when pressed
(2) Press volume up for 3 secs to enter ERecovery to restore your device ... this works, but CANNOT download, or fails to download package over WIFI (only other options are to shutdown/reboot)
(3) Your device will continue to boot 5 seconds later if no operation ... nothing happens, it just hangs on this screen - even when prompt shows "Your device is rebooting now"
It doesn't matter if this stays rooted or not, we just need to successfully reinstall the STOCK ROM and booting/functioning normally.
Any assistance is appreciated.
Regards
RoOSTA
Click to expand...
Click to collapse
Boot in eRecovery by holding the Volume Up button, after booting in eRecovery just download the latest package via connecting to a Wi-Fi network and it should boot up just fine.

LesterDMolester said:
Boot in eRecovery by holding the Volume Up button, after booting in eRecovery just download the latest package via connecting to a Wi-Fi network and it should boot up just fine.
Click to expand...
Click to collapse
Hey,
Perhaps read point 2 in my message first..?
RoOSTA

roosta said:
Hey,
Perhaps read point 2 in my message first..?
RoOSTA
Click to expand...
Click to collapse
Try downloading an older firmware extract the contents of the .app file using huawei firmware extractor and flash system.img recovery_ramdisk.img oeminfo.img product.img and vendor.img using fastboot and if the phone boots up just update it to a newer firmware, that's how i did it to my P10 Plus, it didn't wanna download via eRecovery too, sorry for the misunderstanding i forgot that it doesn't wanna download for you, i don't have the device with me now because i broke my display (again) so it's getting fixed but it won't be done untill saturday, i'll upload the firmware i used so that you can try too.

if the bootloader is unlocked flash twrp using the command: fastboot flash recovery_ramdisk "path to TWRP.img"
after flashing type: fastboot reboot and immediately start pressing the Volume Up and power button untill the HUAWEI logo shows up, after booting to TWRP flash oeminfo.img using the install option in TWRP, after that reboot and try downloading the firmware using eRecovery again, hopefully this time it will let you download it.

LesterDMolester said:
if the bootloader is unlocked flash twrp using the command: fastboot flash recovery_ramdisk "path to TWRP.img"
after flashing type: fastboot reboot and immediately start pressing the Volume Up and power button untill the HUAWEI logo shows up, after booting to TWRP flash oeminfo.img using the install option in TWRP, after that reboot and try downloading the firmware using eRecovery again, hopefully this time it will let you download it.
Click to expand...
Click to collapse
Thanks Lester I will try this when Ian home and let you know how I go...

roosta said:
Thanks Lester I will try this when Ian home and let you know how I go...
Click to expand...
Click to collapse
Dude pls wait don't try this i found another way, i bricked my phone accidentally today and i found a way, gonna take me some time to explain but i'll try my best.

So first of all download this firmware here extract it on your pc and boot to bootloader and flash TWRP_kirin.img to recovery_ramdisk, after that reboot the phone and boot in recovery via holding the volume up and power button, when in TWRP copy the dload folder from the firmware you extracted on your pc to your phone after that copy the RECOVERY8_NoCheck.img to your phone and flash it as recovery ramdisk via the install option in TWRP, power off your phone and press and hold the volume buttons and the power button and wait for it to boot and let it install the update, i really hope this helps you, it helped me after struggling with it all day long.

Hi Lester, it's been an eternity since I was online here as I put this on the back-burner with more pressing work and family priorities. Thank you very much for providing the files. I noticed the ROM firmware is EU, when i am outside of EU....but shouldn't be too big of a problem.... I am getting around to doing all of this now, I have downloaded the files. When are you typically online to chat about this?
RoOSTA

It cannot boot into TWRP, only the eRecovery. No option to flash anything on SD card, other than connecting to WIFI...

Hii roosta,
I might have some problem with you, let me facing your thread , I 'like to learn too how to make my P1o plus back to normal again, it's being long time for me to bring this up...

LesterDMolester said:
So first of all download this firmware here extract it on your pc and boot to bootloader and flash TWRP_kirin.img to recovery_ramdisk, after that reboot the phone and boot in recovery via holding the volume up and power button, when in TWRP copy the dload folder from the firmware you extracted on your pc to your phone after that copy the RECOVERY8_NoCheck.img to your phone and flash it as recovery ramdisk via the install option in TWRP, power off your phone and press and hold the volume buttons and the power button and wait for it to boot and let it install the update, i really hope this helps you, it helped me after struggling with it all day long.
Click to expand...
Click to collapse
I had try to download from ( https://androidhost.ru/29Qt ) ....but its need much time event with IDM ( 20hrs ) )