Database Users

HELP!!! Killed my beloved device...? (Upgrading)

Hi all.
Need some help really bad. Tried to upgrade my magician (s100) to ROM 1.11.133WWE from qtek.se.
Did exactly as it said I had to but as soon as I started the upgrading my magician went all dead and black and the install shield wizard went down. The only thing left on the computer screen is a box that says: "checking the information on your device... please wait...
Please dont disconnect your device from your PC until the update is completed".
So what do I do?!?!
Am desperate to get my device working again!
Please please help me!

I'm really sorry to here this ... anyway..
As far as I know.. u have my to disconnect ur PPC from the USB cable, then restart PC, u should continue to upgrade after u PC restarts..
u may also try to change the port of the USB cable as well...
this may work on Win XP, I don't know anything about other OS..
I'm not sure about this since I did not face this problem b4..but this solution was reported in another forum ( and maybe here )
I hope this will help...and maybe someone else could give u more INFO...
cheers

Alive!
Got it working!
Did a couple of reboots and that made the trick...
Now, my only problem is that I cant seem to restore my backup-files
Does anyone know where I can download the free program o2plus that I had earlier? Can´t find it anywhere. Loved that thing...
Thanx!

I believe it is better if u do a new fresh installation of everything instead of making a restoration
many users reported problems when restoring after an upgrade...
mostly, ur device will become very slow ....

Problems with MDA PW10A2 (unlocking)

I followed instructions (http://forum.xda-developers.com/showthread.php?t=244549), and I executed 3.17.03_ENG.exe after xdaunlock.exe failed.
My device is now unusable, some error occured regarding usb connection and now all I have on pocket pc is upgrading bar with 0%.....cant reset cant do anything?!?
Please help!

If I understand corectly I need to put boot on my sd card.....

look here
this might help http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD

thnx....and....where can I find rom image?

http://www.romkitchen.de/

no bootloader on wallaby
hello again ,,to jay05 thxs for replying back but u dont seem to understand what i am saying i will say it more clearly hopefully someone can help ,
ok there is no bootloader on the device its been erased when i do a hardreset nothing happens so can someone please tell me how to put back the bootloader on the device ,,its impossible via sd card and when i connect it via usb cable all i get in my device manager is a usb device as"HTC USB SYNC"
ok so there must be software that can somehow flash this pda as the computer recognises it as a htc usb sync ,,i done a search on google and found several software that runs on similar setups like the treo but none for wallaby so please someone there must be a way to upload the bootloader back to the device via usb cable pls someone help me out i also tried the xda developer tool pnewbootloader no use nothing happens
there must some kind of special HTC software that can flash the chips on the pda similar to the jtag technique but thru usb as again i repeat my comp sees the pda as a htc usb sync
i hope someone can help
many thanks and a happy new year

HTC HD2 not turning on after rom update

Hi,
I made a HSPL and it's succesfull cause i saw "we hacked it" on screen, than i download a rom from htc's site and install it successfully and than my device turned off.
I tried all of the button variations but unable to open my phone again. I tried the hard reset (volume down+on) and etc.
And still no sign of living
I tried another battery which is working and still a NO. I tried to charge it and no amber or green light appears.
But i find out when i connect the device to pc with usb, it gives me a sign of living that my 64 bit win 7 tries to install a driver called Qualcomm CDMA Tech. MSM driver. But unable to install it too.
Please tell me what to do cause i need to give this phone working to my cousin.

You downloaded a rom from HTC's site? Im no expert... but could you link to where you found this?

www . htc . com/tr/SupportViewNews.aspx?dl_id=878&news_id=534
Hi,
It's a Turkish rom upgrade, i wanted to change the WM to Turkish

Interesting.... but its Tmobile US HD2?

Yes it's a Tmobile US HD2

but the rom isn't tmous.and it won't have a .50. radio.
unlucky. theres a thread sticky at the top of the tmous section with a possible new brick fix. don't know ifit's this problem,but worth a look.
edit - ROM versiyonu: 1.66.468.1

couldn't find it actually i'm a newbie can u give me the address?

bookmark this
http://forum.xda-developers.com/forumdisplay.php?f=631
that's your tmous section the thread is top one or two posts in rom development section

I read that topic now but i couldn't understand how will i open the device to bootloader status cause i tried it million times and no sign of living from my leo
first i have to put the device on bootloader but this is my problem

yeai've just been reading it too. seems it's for a different problem.
your only hope then is take it back.

2 words: Search Function.
Seriously though, please use the forum's search function before posting yet another thread.
On topic, your bricked. The brick fix only works if you can actually get to the bootloader: which you can't do because you installed the wrong ROM. The only current solution is to send it back to T-Mobile and play dumb.
Sorry,
~Jasecloud4

htc hd2
i put a rom on my phone it looked like it was working whem i came back my phone was black so i thought it was off so i thought it will turn on so i tryed turning it on it dosent at all i also tryed hard resr hold up and down to manufacter reset and nothing it stays black but when i connect it to my computer it says its connected but nothing pops up please help im only 13 and my parents r going to scream the living hell out of me so work hard and help or even send me a free htc hd2 thanks

actually ur phone bricked.only the solution is jtag method to getting bootloader.better u have to give this expert tech in any service centre........

how to upgrade the bootloader?

does anyone know how to upgrade the bootloader on the himalaya at the moment mine reads at the top of the screen SERIAL and at the bottom V1.01.
I have a file which i think is a upgrade [boot_1.06.nb0]
but i have to need to know the do's and dont's as i would think this would be if done wrong brick my himalaya?
any help or links would be thankfull?

advanced15 said:
does anyone know how to upgrade the bootloader on the himalaya at the moment mine reads at the top of the screen SERIAL and at the bottom V1.01.
I have a file which i think is a upgrade [boot_1.06.nb0]
but i have to need to know the do's and dont's as i would think this would be if done wrong brick my himalaya?
any help or links would be thankfull?
Click to expand...
Click to collapse
The only one question is
Why the hell you want to do that?
I have 1.01 also on my second today-use himalaya and it is really stable and works same as 1.06, but has some debugging output in mtty which is so useful
I tried also to upgrade it and I failed.

I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.

mikeymcmk said:
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
Click to expand...
Click to collapse
Hay mickey tell me that are you able to sync data or contects,msgs etc with system without disconnecting ?????????
or sometimes connection disconnects automatically ????/
if yes then put something stable thing in between data cable & device.
reply soon

KAASHP said:
Hay mickey tell me that are you able to sync data or contects,msgs etc with system without disconnecting ?????????
or sometimes connection disconnects automatically ????/
if yes then put something stable thing in between data cable & device.
reply soon
Click to expand...
Click to collapse
if anybody have same problem do as per my suggestion
put something in between data cable & device if you connect it without disconnection then it works flash the rom after putting it in bootloader mode

Don't do it
the bootloader is the main program which executes the system programs so avoid to upgrade bootloder.
the result will be permanent damage to your lovable device...
it can't boot more. so be careful.
no need to upgrade it as per my suggestion.

HTC Imagio wont turn on

My name is carlos and im new in the forum.
This is my problem. I have an HTC Imagio. I tryied to update it but i fail because my phone wont turn on again. I dont know what can i do because I new in the htc world and I dont know how can I start.
Please heeeeeeelpppppp meeeeeeeeeeeeeeee

when yoy say "fail" what exactly happen....???

The phone wont turn on again T_T

You're not giving a very good explanation, did you attempt boot loader mode? anything else? at the present moment, you're just taking up thread space..

The boot loader mode is the hard reset??? or what is it?? The phone doenst enter on the hard reset (color screen with 3 options)

Moved as this is not ROM Development

Sorry about that, anyone know how i can fix it????

Hi i have a imagio dead. No bootloader load (someone wrote a blackstone hspl) and broke it .. the only thing when i connect on usb it is found as a qualcomm msm smthing. no drivers for this.. looked all over, xda, google. i found some jtag methods... I wrote a Intelpxa for a rw6815 with jmmflaser... but befor trying a jtag method, and/or try to sell it for components, i want to give it another try. Does enyone know how at least connect to mtty(to write wia usb the bl), or write a bl (any) wia usb?

Imagio Bricked
No USB way...
Unbrick a phone just can be made with JTAG tools... See jtagbox.com/riff-jtag-box-owners-unbrick-your-phone/shops-unbrick-bricked-phone-riff-box-owners-list

Hello everyone ... this is my first post on the forum I'm a reprimand in my assistance, a residue in Brazil and a customer trou Imagio HTC unlock the verizon and I just noticed that no longer seems to me he is the one CDMA XV6975 which blotted out and not turned over, but do not have IMEI MEID DEC and HEX as well ... riff bought a box to try and repair it could make you turn it on, no longer leaves the HTC logo and is vibrating, already tried the hard reset recovery mode and nothing continues to vibrate, not boot tried one more rom's not leave 0%. Can anyone help me with this device, because the customer does not come out of my foot.
Thanks to all.

Htc imagio bricked
hello guys, i really need help from u. i bricked my imagio this evening and right now it wont turn on so i don't know if u guys can hlp me with any software to recover it.
I will be very happy to c my imagio is breathing.
thanks for your help may God bless you all.