Silesh.Nair said:
I use jio too and have no issues.
Click to expand...
Click to collapse
Hi @Silesh.Nair amazing work.. I have downloaded this couple of days back and used for a day but reverted back for video recording.
Now I will be installing it again today.. However, I am unable to register more than 1 Fingerprint. Tried clean install n everything I could think of..but to no avail.. your help on this will be greatly appreciated.
Unable to attach the baseband screenshot due to some network error on app.
Let me know what can be done
Read the OP of the CM-14.1 thread. The answer to your question is available there.
Sent from my Moto G4 Plus using Tapatalk
StreetLord69786 said:
Hi @Silesh.Nair amazing work.. I have downloaded this couple of days back and used for a day but reverted back for video recording.
Now I will be installing it again today.. However, I am unable to register more than 1 Fingerprint. Tried clean install n everything I could think of..but to no avail.. your help on this will be greatly appreciated.
Unable to attach the baseband screenshot due to some network error on app.
Let me know what can be done
Click to expand...
Click to collapse
What error it shows for another fingerprint... : Enrollment not completed....?
Dont worry,,
all 5 Fingerprints can be used however shows 1 FP added....
Just do a clean install then add 1 FP,
After that try adding 4 other FP which you like to use...
Probably all other 4 will show enrollment error..
Now, try unlocking with with second or third FP you added and which faced enrollment error... It will be succeed to unlock device...
No one knows why it shows only 1 FP added, even though all FPs are got registered....
I hope you got MY ENGLISH...
Screenshot attached
Silesh.Nair said:
Read the OP of the CM-14.1 thread. The answer to your question is available there.
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
Yes, I have seen that. I was already in 'N' and again came back to N.. But only 1 FP.
__Madddy said:
What error it shows for another fingerprint... : Enrollment not completed....?
Dont worry,,
all 5 Fingerprints can be used however shows 1 FP added....
Just do a clean install then add 1 FP,
After that try adding 4 other FP which you like to use...
Probably all other 4 will show enrollment error..
Now, try unlocking with with second or third FP you added and which faced enrollment error... It will be succeed to unlock device...
No one knows why it shows only 1 FP added, even though all FPs are got registered....
I hope you got MY ENGLISH...
Click to expand...
Click to collapse
I absolutely got your English...don't worry we all came from somewhere or the other
It shows as Fingerprint enrollment couldn't be completed due to an internal error. What is shocking is that I see another 3 or 2 prints at times added already but when I try to delete them; my original print gets deleted and these ghost prints (as I like to call them) come back again.
What's your take on this?
What's your baseband version?
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
What's your baseband version?
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
Baseband:
M8952_70009.08.03.45R
ATHENE_INDIA_DSDS_CUST
Build:
NPJ25.75-2
Kernel Version:
3.10.84-gf8fdcaa
[email protected] #1
Fri Oct 14 16:27:08 CDT 2016
That's why and you didn't read the OP. You are running M modem on an N base. It will not work. You have to update your modem to N. Read the red text in the OP which tells you how to do it.
This is applicable only for custom ROMs.
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
That's why and you didn't read the OP. You are running M modem on an N base. It will not work. You have to update your modem to N. Read the red text in the OP which tells you how to do it.
This is applicable only for custom ROMs.
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
Oh! Sorry I am not trying to be rude here but I am unable to sort this out. Now, if I am in MM modem, I need to flash the N. How to do that? I have the files for MM and the Blur Version file for N. Can you please help me with the appropriate ROM links.
When I try to flash the MM version so that I can again do a fresh install of N; I get the 'Security Version Downgrade' error in fastboot.
Just a little lost here. Appreciate you taking out time for me..
Don't tell me you can't read this text in the opening post of the CM-14.1 thread. Procedure and links are avavilable there.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
Don't tell me you can't read this text in the opening post of the CM-14.1 thread. Procedure and links are avavilable there.
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
My bad brother. **facepalm**
Will post results by evening.
StreetLord69786 said:
I absolutely got your English...don't worry we all came from somewhere or the other
It shows as Fingerprint enrollment couldn't be completed due to an internal error. What is shocking is that I see another 3 or 2 prints at times added already but when I try to delete them; my original print gets deleted and these ghost prints (as I like to call them) come back again.
What's your take on this?
Click to expand...
Click to collapse
I also had 3 ghost FPs on previous installation... And till now my observations is : don't add all FPs back to back...
If you got Ghost FP, you need to remove them ( by formatting / fresh start )
After that add 1st FP only... Then go to settings and add 2nd, then close setting, do close setting on adding of each FP.... I have 4 FP working and no ghost FP....
__Madddy said:
I also had 3 ghost FPs on previous installation... And till now my observations is : don't add all FPs back to back...
If you got Ghost FP, you need to remove them ( by formatting / fresh start )
After that add 1st FP only... Then go to settings and add 2nd, then close setting, do close setting on adding of each FP.... I have 4 FP working and no ghost FP....
Click to expand...
Click to collapse
Hmm I can relate to that..
@Silesh.Nair Sorry for the trouble. Issue fixed now... Thanks a lot... ROM working absolutely beautiful. However video recording not working even after clean install.
Silesh.Nair said:
Don't tell me you can't read this text in the opening post of the CM-14.1 thread. Procedure and links are avavilable there.
Click to expand...
Click to collapse
I have tried flashing the N modem using the zip file in the cm 14.1 op. I then remembered that when I was on MM, I didn't update to the 63/64 update because I was already on a modified system partition. Can you also include a zip file to upgrade my modem to 63/64 and then I'll use your zip file to upgrade it to N? Thank you!
I have found the modem file. Thank you!
139-63 modem is in the form of a bin file that you need to flash from bootloader using fastboot. Files are accessible from the link in my signature.
Sent from my Moto G4 Plus using Tapatalk
I cant find the n modem or the op
Please send the me the link if anyone one knows @Silesh.Nair
++Addy98++ said:
I cant find the n modem or the op
Please send the me the link if anyone one knows @Silesh.Nair
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=69561604&postcount=369 is where Silesh has a link to the N soak test modem.
Bear in mind this is the soak test modem (.52R), also, you may have better luck and more stability if you were to flash the fastboot Nougat ROM, which contains the newer .62R modem file https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
I run on Baseband-Version M8952_70004.04.03.32R. Just one Fingerprint working.
I do not have much experience yet, just managed to flash OmniROM 9.0 - and pretty satisfied with that.
What do you recommend to one like me about the modem/fingerprint problem?
Related
Fenris https://en.wikipedia.org/wiki/Fenrir is one evil wolf.
ooops a little to evil i think, withdrawn until i review the buzz
Not a Moderator to Tell what to do but i think this is not correct place to start ROM thread
http://forum.xda-developers.com/nexus-7-2013/development
or
http://forum.xda-developers.com/nexus-7-2013/orig-development
i maybe completely wrong too
vinumsv said:
Not a Moderator to Tell what to do but i think this is not correct place to start ROM thread
http://forum.xda-developers.com/nexus-7-2013/development
or
http://forum.xda-developers.com/nexus-7-2013/orig-development
i maybe completely wrong too
Click to expand...
Click to collapse
yep thats what i thought to, then read this at the top of the dev forum
http://forum.xda-developers.com/showthread.php?t=2380904
which basically said if not you own it do not post it there, also suggested posting it here.
Since i only really tweaked the zip of beanstalk to produce Fenris, and just added a little bash code, dont know if it counts as my work, i did not compile anything at all.
Having said that am back at my linux box in 2 days and will compile it from scratch then
Fenris V6 up
First of all, thank you for your effort around making tweaking and modding BeanStalk rom.
After, regarding where it should go, I think it "Android Development" category would fit, but I'm sure someone will confirm and move there if necessary.
Sounds great, can't wait to get home and try it out. I'm currently using PAC, but it lacks a lot of the usual PAC features. Same is for paranoid for Flo, it's almost completely pure AOSP and lacks a lot of the usual features.
Sent from my Nexus 7 using XDA Premium 4 mobile app
What kernel should I use for this - CAF or AOSP?
Sent from my Nexus 7 using XDA Premium 4 mobile app
jubei_mitsuyoshi said:
Fenris V6 up
Click to expand...
Click to collapse
I'll be happy if it just doesn't random reboot like the CM11 does. So far, only stock is solid.
jmdearras said:
I'll be happy if it just doesn't random reboot like the CM11 does. So far, only stock is solid.
Click to expand...
Click to collapse
Nope zero problems for me
V6 semed to have got lost in the air somewhere , but v7 ( pretty stable i think just doing last of the tests ) is up and very very very good
A bit of a warning here, Fenris is not like other roms, to get the best out of it either read the setup instructions with a fine tooth comb, or be VERY familiar with lucky patcher already
Fenris V8 ( what i hope is the last version ) is up, so far no big bugs
jubei_mitsuyoshi said:
Fenris V8 ( what i hope is the last version ) is up, so far no big bugs
Click to expand...
Click to collapse
V8 fails to flash. Twrp gave me a failed updater binary error (or something like that) error.
Sent from my Nexus 7 (2013)
oadam11 said:
V8 fails to flash. Twrp gave me a failed updater binary error (or something like that) error.
Sent from my Nexus 7 (2013)
Click to expand...
Click to collapse
Ok am on it, will have a look and fix if necessary within the hour,
There is a separate problem, the new build of beanstalk i am using seems to have broken bluetooth, i have just checked on a clean unmodified beanstalk / fresh flash and def something up with the Bluetooth, since im not compiling it yet doubt can fix, am revering back to the previous release and checking its working on that, if not going on that will be changing rom base.
Just flashed my local V8 with no problems, twice to check,
So has to be a upload/download issue, can you try re-downloading and try again ?, if still issue will re-upload file.
What does the TWRP window say ? does it fail at a script line or fail at the beginning ?
jubei_mitsuyoshi said:
Just flashed my local V8 with no problems, twice to check,
So has to be a upload/download issue, can you try re-downloading and try again ?, if still issue will re-upload file.
What does the TWRP window say ? does it fail at a script line or fail at the beginning ?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I redownloaded and tried it again. The attached picture shows the error I am getting. I am using multirom if that makes a difference
Sent from my LG-VS980
oadam11 said:
View attachment 2641154
I redownloaded and tried it again. The attached picture shows the error I am getting. I am using multirom if that makes a difference
Sent from my LG-VS980
Click to expand...
Click to collapse
hmm yes obviously an issue when flashing as secondary rom, maybe something to do with the new " check journals gone with a script " feature, will remove it and see if that makes a difference, will call it v8.1 and do it for tonight.
Ps seems Bluetooth does work, just the options>blutooth>on/of switch is flaky, can be swiched well with the drop-down panels.
Its a small bug and do not think its reason to switch base rom.
Have checked pairing with few devices,all pair, by no means a good spread
8.1 is uploaded , can i ask what TWRP you are using ? , i dont recognise your screenshots, is it the multirom app ? I use 2.7 multirom TWRP and it does not look like that ( in fact your screens look much better )
jubei_mitsuyoshi said:
8.1 is uploaded , can i ask what TWRP you are using ? , i dont recognise your screenshots, is it the multirom app ? I use 2.7 multirom TWRP and it does not look like that ( in fact your screens look much better )
Click to expand...
Click to collapse
I'm on the latest multirom 2.7. I use a twrp theme so that's why it looks different. Thanks. I'm going to try 8.1 once its done downloading
Here is the forum to the theme that I use
http://forum.xda-developers.com/showthread.php?t=2409432
[THEME][N7.2] TWRP Holofied - Black / Dark / Light / Play / XDA / MultiROM [12/03/14]
Sent from my Nexus 7
oadam11 said:
I'm on the latest multirom 2.7. I use a twrp theme so that's why it looks different. Thanks. I'm going to try 8.1 once its done downloading
Here is the forum to the theme that I use
http://forum.xda-developers.com/showthread.php?t=2409432
[THEME][N7.2] TWRP Holofied - Black / Dark / Light / Play / XDA / MultiROM [12/03/14]
Sent from my Nexus 7
Click to expand...
Click to collapse
Ahhh thank you very very much, must say one learns something new every day on XDA
Ok found/fixed the issue with Fenris and multirom, the multirom environment is incompatible with my ext4 journal fix, hence i have made a version without my ext4 fix, its in the same folder but with a "multirom" tag, just tested and will be good.
I do a fair amount of weird kernel tweaking in the init.d , no idea if any of that is multirom complaint, certainly have not tested it in that env
V9 is up, this is final stable version, which i use every day, lead post updated.
Edit : All issue is solved now check this post
Hi
This post is only intended for GPE converted 1033 users. i've seen many guys complaining in Dev section.
im a GPE converted 1033 user since the day i unlocked the bootloader.
in recent past had a issue with all the CM12 based roms like
1. Encryption Error due to EXT4 partition
2. WiFi wont work (CM integrated wifi modules into kernel)
3. Roms recognize my device as Dual SIM after converting to GPE
4. Continuous System UI force closes
earlier, all this problem solved by flashing Donkey Kang Kernel. Recently dev of DKK stopped support for our device
Solution
as a workaround till our devs fix the issue with GPE converted 1033 devices. i took DKK3.8 kernel and CM12 Based Boot.img (exactly RR rom) made a new boot.img which works for me without above mentioned problems. i'm just sharing my experience here. if you feel this workaround is useful please confirm
summary
RAMDISK form DKK3.8
Zimage from CM12 based Kernel(Integrated WiFi Modules)
How to install.
the provided file is boot.img directly (not a flashable zip. )
Latest TWRP supports flashing img files directly. please make use of it else you can also use apps like rashr which is available in playstore.
please make sure you know what you are doing before messing with your device.
PS : i'm not a developer
Edit : i tested with Resurrection Rom and i can confirm everything works as a single sim device on GPE converted 1033
Edit1 : tested with validus build 17-01 works prefectly
Edit2 : all credits to the developers
tell me the changes needed i'll rebuild my base around it..
bharat_goku said:
tell me the changes needed i'll rebuild my base around it..
Click to expand...
Click to collapse
Actually the problem started when cm integrated WiFi modules into the kernel.
Also when i compare ram disk. gpe check has changed in the recent kernels. Earlier separated fstab available for gpe device Now its merged
In my op the boot.IMG consists of ramdisk from DKK 3.8 and zimage from latest cm source
reversegear said:
Actually the problem started when cm integrated WiFi modules into the kernel.
Also when i compare ram disk. gpe check has changed in the recent kernels. Earlier separated fstab available for gpe device Now its merged
In my op the boot.IMG consists of ramdisk from DKK 3.8 and zimage from latest cm source
Click to expand...
Click to collapse
Can these changes be merged in official cm?? @bharat_goku can u pls tell me??
Sent from my Moto G using XDA Free mobile app
Differences between stock kernel and modified kernels
Stock kernel device recognised as dual sim in terminal
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Modified kernel device recognised as gpe in terminal
Flashhhh said:
Can these changes be merged in official cm?? @bharat_goku can u pls tell me??
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
Does this work for u
reversegear said:
Does this work for u
Click to expand...
Click to collapse
I haven't tested yet but it should work
Sent from my Moto G using XDA Free mobile app
can i flash this boot.img on donkey kang kernel or should reflash rom and then flash boot.img?
edit:just flashed it using rashr app on candy rom above donkey kernel and everything is fine...thanks for this fix
Will try now..
worked for me
This worked for me. I couldn't receive SMS after flashing any ROM. Now I can receive. Also my phone is being detected as gpe single sim now. But I have a query. Would multitasking be affected by changing this boot.img ? Or it is only just for setting up boot correctly. Please if u can elaborate. Sorry for being noob.
prasoon27 said:
This worked for me. I couldn't receive SMS after flashing any ROM. Now I can receive. Also my phone is being detected as gpe single sim now. But I have a query. Would multitasking be affected by changing this boot.img ? Or it is only just for setting up boot correctly. Please if u can elaborate. Sorry for being noob.
Click to expand...
Click to collapse
as far as multitasking is concerned it is as good as CM12 roms.
this link might be useful if you are concerned about multitasking http://forum.xda-developers.com/moto-g/general/fix-lmk-fixer-adj-t3007589
reversegear said:
as far as multitasking is concerned it is as good as CM12 roms.
this link might be useful if you are concerned about multitasking http://forum.xda-developers.com/moto-g/general/fix-lmk-fixer-adj-t3007589
Click to expand...
Click to collapse
Thanks for the response. You are right, there are no multitasking issues.
Working perfectly for me... flickering issue also stopped... Super smooth now... using Crdroid..
padhu1989 said:
Working perfectly for me... flickering issue also stopped... Super smooth now... using Crdroid..
Click to expand...
Click to collapse
what is that Flickering issue..
bcoz i never came across Flickering issue with my device.
reversegear said:
what is that Flickering issue..
bcoz i never came across Flickering issue with my device.
Click to expand...
Click to collapse
i think it happen to people who updated to stock lollipop or something like that...i never enconter it too bcz i never gone back to stock
I found the cause of this "bug" gpe converted. In cm11 when has the file persist.radio.multisim.config empty into /data/property is recognized as single sim (the file is created automacally on reboot, even if manually delete). Donkey lp too don't create this file automatically in cm12 (what hack he used i don't know), but if create manually or made a dirty flash from cm11 all kernels recognized as single sim (due file created on cm11), if delete or made a factory reset cm12 back to be recognized as dual.
I hope that info help devs to fix in official roms :fingers-crossed:
Update on the way
In the mean time : anyone using this modified kernel pls confirm whether compass tile works in cm12 based ROMs
For me it is struck in initializing
reversegear said:
Update on the way
In the mean time : anyone using this modified kernel pls confirm whether compass tile works in cm12 based ROMs
For me it is struck in initializing
Click to expand...
Click to collapse
Yeah it not working on rr it getting stuck on initializing
reversegear said:
Solution
as a workaround till our devs fix the issue with GPE converted 1033 devices. i took DKK3.8 kernel and CM12 Based Boot.img (exactly RR rom) made a new boot.img which works for me without above mentioned problems. i'm just sharing my experience here. if you feel this workaround is useful please confirm
Click to expand...
Click to collapse
Based on your solution I've been looking at the RAMDISK of the Donkey Kernel and found that the only file that is required to start system as GPE is his "init" binary within the ramdisk. I've tried with 3 differents kernels from AOSP based roms and worked.
ren2r said:
Based on your solution I've been looking at the RAMDISK of the Donkey Kernel and found that the only file that is required to start system as GPE is his "init" binary within the ramdisk. I've tried with 3 differents kernels from AOSP based roms and worked.
Click to expand...
Click to collapse
Glad to here that..
You can share ur boot.img here with the permission of the actual kernel/rom developers. by giving them credits
Does compass tile work in ur modified kernel
Edit:
I never knew still so many GPE converted 1033 users on XDA :happy:
Dear All ,
Motorola Turbo Edition was recently released here in India , unfortunately it was released with 5.1.1 & there was no sign of it anywhere getting a Marshmallow Update . When i recently stumbled upon an article on TechDroid.com of MotoG(TE) having an official update for it . But the problem was the author of the article as well the source haven't posted the method reliable to do it . Some suggested to flash it by keeping it in the root of the SD card and flashing it via recovery others insisted that it is only possible with ADB only to do it . To them with all due respect the methods was not successful & resulted in errors like
E: footer is wrong
E: Signature verification failed
Installation aborted
When i stumbled upon a youtube video from Mexican Author ( Android LatinoAmerica Pro )
who had shown the steps to flash an official Moto G (TE ) without any hassles .
Without further delay here are the Prerequisites & steps mentioned below .
Keep in mind i am not responsible for any hiccups or breakage during the process !!! ( You Have Been Warned )
Pre-Requisites :
Motorola Drivers : you can download motorola device manager from Here
Install the Device Manager & go to developer options to enable usb debugging
Next you will be requiring the 6.0 Rom from Here
After downloading the rom unpack it
Next you will be requiring a software for flashing official apps called RSD Lite you can download it from below the post .
When you install it it should open like so :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After that do this :
>After that Power Off the device
>Boot in fastboot mode by pressing Volume Down (-) button & power button Simultaneously
>Attach the USB Cable you will see usb port number 1 as being connected
> Press the Start button & let the magic happen after flashing the device will boot itself
>First boot will take time have patience
Say thanks if this post has helped you all the Moto G Turbo Edition Fans out there
Anyone tried it,, waiting.. ..
Wani Aamir said:
Anyone tried it,, waiting.. ..
Click to expand...
Click to collapse
My phone seems to work just fine
---------- Post added at 11:46 PM ---------- Previous post was at 11:44 PM ----------
[/COLOR]
prateek.maac said:
My phone seems to work just fine
Click to expand...
Click to collapse
How's the phone after Marshmallow, battery, performance, etc,Have u rooted it?
Wani Aamir said:
---------- Post added at 11:46 PM ---------- Previous post was at 11:44 PM ----------
[/COLOR]
How's the phone after Marshmallow, battery, performance, etc,Have u rooted it?
Click to expand...
Click to collapse
Performance has increased quiet a bit heating has gone down , apps install quickly , app by app permissions have come into effect , System UI tuner helps to add custom icons on notification access . I have not rooted the device since i have only this phone left rest all are either bricked or sold . So can't afford to buy a new one
Thanks,,,me too bricked canvas 5 last month,,,gud luck to u next time
One more thing, what if i flash Marshmallow via fastboot? Safe na?
Marshmallow Ota is out in India,, enjoy
Wani Aamir said:
Thanks,,,me too bricked canvas 5 last month,,,gud luck to u next time
One more thing, what if i flash Marshmallow via fastboot? Safe na?
Click to expand...
Click to collapse
enjoy the OTA update friend
Yeah friend enjoying,happy marshmallow day
Need to knw abt the twrp fr Moto G Turbo edition when will it be out ????
Check this
http://forum.xda-developers.com/showthread.php?t=3295098
How to root..
i have updated my moto g turbo (XT1557) Android 6.0 Marshmallow using OTA.
but i dont like it, i want to go back to 5.1. Is this safe to flash 5.1 factory image
lovely39 said:
i have updated my moto g turbo (XT1557) Android 6.0 Marshmallow using OTA.
but i dont like it, i want to go back to 5.1. Is this safe to flash 5.1 factory image
Click to expand...
Click to collapse
No you will mess your phone up...
wait for fix of whatever problem you are facing
hello guys ... just recieved my device moto g turbo...it feels so solid and good
waiting for a forum thread for this device no heating issues at all....
Hello guys
I have a problem
not a single camera app works which are available at xda ....like lemovo super camera is not working n so on.... even camera app on playstore like A-Z camera also not working after marshmallow update..... any one have this problem ?
Can we revert back to Lollipop 5.1.1 without rooting the phone?
Sound not working
Dears,
I have MOTO G turbo edition. the sound of the device is not working properly .I need to use either headset or loudspeaker to use while calling.
I have upgraded to Marshmallow 6.0.1.
can any one help?
Akash sky said:
Hello guys
I have a problem
not a single camera app works which are available at xda ....like lemovo super camera is not working n so on.... even camera app on playstore like A-Z camera also not working after marshmallow update..... any one have this problem ?[/QUOTwhat about your battery life
Click to expand...
Click to collapse
Az Rex said:
Akash sky said:
Hello guys
I have a problem
not a single camera app works which are available at xda ....like lemovo super camera is not working n so on.... even camera app on playstore like A-Z camera also not working after marshmallow update..... any one have this problem ?[/QUOTwhat about your battery life
Click to expand...
Click to collapse
thats because moto g turbo don't supprt camera2api ... that mean az camera won't work.
i don't have moto g turbo but as fas i remember lenovo super camera did work for me.
Click to expand...
Click to collapse
Hi guys, i just received my new prime exclusive moto g 4th, once i turned on my devices an update appears so i installed it (OTA), i remember there was something in the name like MPJ24.139-64, once it finished updating i wanted to remove the ads following this tutorial MOTO G 4th Gen How to Remove the Amazon Lock Screen Ads and Bloat Ware . i did it all exactly as it is on the post. now my device can't start and i am not able to install the stock firmware cause all the stock rom versions available are actually lower that the installed on my phone and i think i can't downgrade because of the locked bootloader and it seems to be unlockable .
also it says on the recovery mode the next legancy: WE HAVE DETECTED AN ATTEMPT TO FLASH UNAUTHORIZED SW ON YOUR DEVICE. CONTACT CUSTOMER SERVICE FOR ASSISTANCE.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Already tried
stkpxl said:
Try the above firmware. Should be the current version for your phone.
Click to expand...
Click to collapse
thanks for your help, i have already tried with that one, i flashes completely then when i reboot the devices it starts into recovery mode and says WE HAVE DETECTED AN ATTEMPT TO FLASH UNAUTHORIZED SW ON YOUR DEVICE. CONTACT CUSTOMER SERVICE FOR ASSISTANCE.
I think flashing S/W posted on Motorola site should bring your phone back to life.
See the thread - http://forum.xda-developers.com/showpost.php?p=68502532&postcount=381 for the link to the same.
mobile-junky said:
I think flashing S/W posted on Motorola site should bring your phone back to life.
See the thread - http://forum.xda-developers.com/showpost.php?p=68502532&postcount=381 for the link to the same.
Click to expand...
Click to collapse
The moto G 4th X1625 image is not available.
Cclown98 said:
The moto G 4th X1625 image is not available.
Click to expand...
Click to collapse
I would still give it a try as there is nothing to loose.
Or contact Motorola customer care to see what they say.
mobile-junky said:
I would still give it a try as there is nothing to loose.
Or contact Motorola customer care to see what they say.
Click to expand...
Click to collapse
hello, i've already tried those files and im still getting the same problem
Cclown98 said:
hello, i've already tried those files and im still getting the same problem
Click to expand...
Click to collapse
Did you try the files posted by Motorola at their site or the ones posted on android file host ..
If not by Motorola then I would try the same again.
mobile-junky said:
Did you try the files posted by Motorola at their site or the ones posted on android file host ..
If not by Motorola then I would try the same again.
Click to expand...
Click to collapse
there are no files for the xt1625 on the motorola website
Cclown98 said:
there are no files for the xt1625 on the motorola website
Click to expand...
Click to collapse
Please read the thread in http://forum.xda-developers.com/moto-g4/how-to/update-9-1-16-t3453726
It looks like somehow the firmware for the Indian XT1624 was put on your device. As far as I know, no one has been able to install XT1625 firmware on their device after installing the firmware for the XT1624.
---------- Post added at 10:02 AM ---------- Previous post was at 09:46 AM ----------
granny smith said:
Please read the thread in http://forum.xda-developers.com/moto-g4/how-to/update-9-1-16-t3453726
It looks like somehow the firmware for the Indian XT1624 was put on your device. As far as I know, no one has been able to install XT1625 firmware on their device after installing the firmware for the XT1624.
Click to expand...
Click to collapse
After a little research, it does appear that an OTA was released for the AMZ XT1625. Sorry, I can't think of anything else that hasn't already been suggested.
It seems Moto has changed their site and updated the s/w it now shows XT1625.
I am currently downloading from motorola right now. I am also making a backup like normal. I will let you know if it works for the XT1625 as mine is retail US.
OK I downloaded and flashed it. While it came to the July 1 security update build still said -49. There was no Amazon ad crap and I got a system UI fc and retail something fc. Beyond that it was working just fine after about 5 mins.
the problem is that on mine phone the bootloader is unlockable
stkpxl said:
I'm assuming you've tried a factory reset from recovery?
Click to expand...
Click to collapse
yes i have
stkpxl said:
Have you tried unlocking the bootloader? I know you have an Amazon model but it doesn't hurt to try.
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a/session/L2F2LzEvdGltZS8xNDc1MjY0MDkwL3NpZC9mSENuX1hfbQ%3D%3D
Click to expand...
Click to collapse
yes i have tried and it says that my device is no eligible for bootloader unlocking
stkpxl said:
Mine is booting up now, so far the same results as you. Although, I couldn't relock the bootloader. Could you?
EDIT: Trying a factory reset to see if those FCs get fixed....
EDIT2: They don't get fixed with a factory reset. Restarting it FCs File Manager. Restarting a 3rd time, it's fine. Weird
---------- Post added at 11:16 AM ---------- Previous post was at 10:32 AM ----------
Looks like QuadRooter got fixed. Used the CheckPoint scanner to check. I'll take a security update even without updating the build number lol
Click to expand...
Click to collapse
I never tried to relock the bootloader. I still have a few more things to test before I will truly be happy lol.
stkpxl said:
Well it turns out you can't downgrade after flashing this. I tried flashing the previous firmware and got an error. I went ahead and nuked it all and put a build of CM13 on. Bonus for me is that I got received calls to work for once. So I'm fairly happy bow.
Click to expand...
Click to collapse
I restored my backup. I didn't try to downgrade. I will try that tomorrow.
I reflashed the moto firmware from moto website. Tried to downgrade and got an error myself. However I did have the factory -48 firmware. I don't remember where I got it from so sorry I cannot link it. I was able to flash twrp and wiped all data then flashed -48. I instantly received software update after I finished the normal setup. It updated to build number MPJ24.139-64. As soon as everything finishes reinstalling on my XT1625 I will post a screenshot.
Okay I found it again. Hope this will help out. Also this is only for Retail US. I do not think that it will work for AMZ
Firmware That I flashed. http://www.filefactory.com/file/3t2...PJ24.139-48_cid50_subsidy-DEFAULT_CFC.xml.zip
im in the same situation with a soft bricked, bootloder locked, amazon g4. and i would like to try to update with a zip file of the update if there is one to be found somewhere.
Hai Guys
Google has Release Pixel Lineup on October with new android Nougat 7.1. With Android 7.1 Many new features has been Roll Out like Multi Window, Night Mode, Doze Mode v2 Etc.
But For Google Pixel they have Kept Some Feature As Pixel Exclusive such as Pixel Launcher, Google Assistant and Nav Button,
But Through the help of Chromloop m able to port nav button, pixel launcher and Google Assistant to my Device Which Is Moto g 2015 on the base of Lineageos 14.1. So m going to share this to u all which is as follows,
Features Of this Mod
1. Animated Nav Button
1. Pixel Luncher
2. Google Phone
3. Google Contact
4. Google Assistant
5. Pixel Logo And Boot Animation
6. Blue Accent
7. Pixel Ringtone
8. Pixel Round Icon
10. Night Light
11. Pixel Wallpaper
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloading link:- Visit Here
If u have any problem then u can post ur comment here, so will try to fix in future updates.
Changelog 25/1/2017
Mod Has been updated to latest LineageOS 14.1 20170124 Build
Night Mode also Added, (U will Find in Quick Tile)
Decrease the colors density of Blue accent
Google Assistant Tweaks also been added, For me the OK Google hotword working perfectly
Warning If anythings goes wrng then pls dnt blame or others.
Dnt ask like this zip will wrk on this build or like etc, First u do it then tell us it work or not.
Some Important notes:-
1:- SystemUI Crash during booting after flash zip file.
This is mainly cause after new official lineageos upgrade. If its happen then inform to me i will try to update the zip to latest build
2:- After Installing zip screen is stuck on bootloop.
This is mainly cause after new official lineageos upgrade. If its happen then inform to me i will try to update the zip to latest build
3:- Round icon is not wrking
Make sure u have set ur DPI to 320 or 480, then only it will get round icon on gapps only and u must install mine gapps which is found download link
4:- Ok google hotword is not wrking,
U must install google assistant installation zip, before installing u must read installation instruction. must have latest google app beta.
5:- mine device is not wrking properly install zip.
Dont blame to any one. No one will force u any one to install this zip,, This is upto u, take the risk by ur own,
6:- Will this work other than LineageOS 14.1.
Answer Is big NO. This is exclusive for LineageOS 14.1, Dont install on other rom, if u do it then dont post ur problem here,
Thank You.
Thank You If u Like mY work then Plz Click Thanks Button
XDA:DevDB Information
Pixel Theme For Moto G Falcon, Theme for the Moto G
Contributors
Subins Mani(Tintumonn)
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2017-01-25
Created 2017-01-25
Last Updated 2017-02-13
Works like a charm on cm14.1 on falcon xt1033. Thanks.
Can it work in this Rom [ROM][7.0.0_r19]AOSP+OMS/Substratum for Moto G![14th NOV]
cricket4all said:
Can it work in this Rom [ROM][7.0.0_r19]AOSP+OMS/Substratum for Moto G![14th NOV]
Click to expand...
Click to collapse
Check it...
Then confirm to us also..
Sent from my Pixel using Tapatalk
Working on Moto G (falcon) CM1125 build. Flawless. Thankyou!
kamesh_kraken said:
Working on Moto G (falcon) CM1125 build. Flawless. Thankyou!
Click to expand...
Click to collapse
Yeh thank u...
Sent from my Pixel using Tapatalk
cricket4all said:
Can it work in this Rom [ROM][7.0.0_r19]AOSP+OMS/Substratum for Moto G![14th NOV]
Click to expand...
Click to collapse
I'm pretty sure it won't work, AOSP SystemUI is a lot different than the CM one.
Tintumonn said:
4 And the main and Last step is copy the File To /System/Priv-app/SystemUI and Make a new folder then copy to that folder(For a safety), now give that app to permission rw- r- r-. after that copy and Replace that file file main directory SystemUI. Thats It,,,
Click to expand...
Click to collapse
I'm not quiet understand this. Does this mean copy the original systemui apk to a new folder for backup purpose, and replace the old one with the modified one? If so, why the backup one need to modify the permission?
Sorry, my slow internet connection prevent me watching the tutorial video.
Sent from my Moto G using XDA-Developers mobile app
EoneRizuwan said:
I'm not quiet understand this. Does this mean copy the original systemui apk to a new folder for backup purpose, and replace the old one with the modified one? If so, why the backup one need to modify the permission?
Sorry, my slow internet connection prevent me watching the tutorial video.
Sent from my Moto G using XDA-Developers mobile app
Click to expand...
Click to collapse
Sory u r wrng m pasting modified apk to new folder for the purpose of giving permission,,, i actullay take safer side,,, because when i directly copy paste systemui become crush, thats why i gone through this step,,,,
Tintumonn said:
Sory u r wrng m pasting modified apk to new folder for the purpose of giving permission,,, i actullay take safer side,,, because when i directly copy paste systemui become crush, thats why i gone through this step,,,,
Click to expand...
Click to collapse
Thanks. I figured it out and work great so far on XT1033.
Sent from my Moto G using XDA-Developers mobile app
Can anyone port this to Moto g using its own systemui.apk cuz this apk is from Moto g 2015.
Thats why pocket mode is not working....
POCKET MODE NOT WORKING
vkp1997 said:
Can anyone port this to Moto g using its own systemui.apk cuz this apk is from Moto g 2015.
Thats why pocket mode is not working....
POCKET MODE NOT WORKING
Click to expand...
Click to collapse
Oops sry what is pocket mode..
Sent from my Pixel using Tapatalk
Tintumonn said:
Oops sry what is pocket mode..
Click to expand...
Click to collapse
Go to settings>gestures>pocket mode
When enabled, it should wake your device if you keep it in pocket for atleast 5 sec. and then take it out. Actually it wakes your device using proximity sensor...
vkp1997 said:
Go to settings>gestures>pocket mode
When enabled, it should wake your device if you keep it in pocket for atleast 5 sec. and then take it out. Actually it wakes your device using proximity sensor...
Click to expand...
Click to collapse
K we have no pocket mode... K u can try to port according to ur system ui...
Sent from my Pixel using Tapatalk
Tintumonn said:
K we have no pocket mode... K u can try to port according to ur system ui...
Click to expand...
Click to collapse
Can you link any tutorial....? Please
vkp1997 said:
Can you link any tutorial....? Please
Click to expand...
Click to collapse
Goo to chromlook.com ... Best of luck...
Sent from my Pixel using Tapatalk
Fully works for me!!
Thanks!
When using whatsapp the system UI is superimposed on that of the app.
Confirmed working on Moto G4 Plus CM14.1[UNOFFICIAL]
I can't get the white nav bar. Compiled apk from my own systemui (Moto g 1) as given on chromloop.com, animation is fine but can't get white nav bar....any help?