Related
I am lost on this S5 Verizon phone repair any help would be appreciated. Below is everything I have already done. During each time I flashed the device with ODIN I have also went in and did a wipe catch and factory reset to make sure it wasn't anything getting "stuck" during the flash process.
First error message when this all started read:
“System software not authorized by Verizon Wireless has been found on your phone....”
Above this error message in red text reads: Secure Fail: Modem
I decided I would attempt to go back to stock firmware and unroot the device. I have downloaded and loaded step by step of the following software packages via odin.
ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_user_low_ship_MULTI_CERT.tar.md5
ALL_VZW_G900VVRU1ANE9_G900VVZW1ANE9_1556536_REV00_user_low_ship_MULTI_CERT.tar.md5
ALL_VZW_G900VVRU1ANHA_G900VVZW1ANHA_2525521_REV00_user_low_ship_MULTI_CERT.tar.md5
ALL_VZW_G900VVRU1ANI2_G900VVZW1ANI2_2525521_REV00_user_low_ship_MULTI_CERT.tar.md5
I have also attempted to reset the PIT with: KLTE_USA_VZW ( I tried this after the first software package did not correct the issue and did some more research)
After doing all of the above I still get the “System software not authorized by Verizon Wireless has been found on your phone.”
I attempted to use
G900VVRU1BOA8_G900VVZW1BOA8_G900VVRU1BOA8_HOME - which is 5.0 and I am downloading this from Sammobile.com as I type to try instead.
On 5.0 i get a different error instead reading:
Start Up Failed
Your device didn't start up successfully. Use the Verizon software repair assistant on a computer to repair your device.
Above this error message in red text reads: Secure Fail: Modem
I can not use kies as the device is recognized but says it is not supported.
Please note: I did purchase this device knowing the first error message thinking it would just be a simple re-flash back to stock.
My Background: I have worked in the mobile business as a Sprint tech for 2 years and now work for a private company in computer and mobile repair so a total of 3 1/2 years mobile experience. However, I have not run into an issue like this before.
Again any help is much appreciated as this one has me stumped on what to try next
Update
Update:
I have downloaded the firmware G900VVRU1BOA8_G900VVZW1BOA8_VZW from sammobile.com
When flashing with odin i get the same error " Your device didn't start up successfully......"
Also, I attempted to update from zip and I received an error "E footer is wrong" and "E signature verification failed"
Again any suggestion are appreciated.
tan0892 said:
I am lost on this S5 Verizon phone repair any help would be appreciated. Below is everything I have already done. During each time I flashed the device with ODIN I have also went in and did a wipe catch and factory reset to make sure it wasn't anything getting "stuck" during the flash process.
First error message when this all started read:
“System software not authorized by Verizon Wireless has been found on your phone....”
Above this error message in red text reads: Secure Fail: Modem
I decided I would attempt to go back to stock firmware and unroot the device. I have downloaded and loaded step by step of the following software packages via odin.
ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_user_low_ship_MULTI_CERT.tar.md5
ALL_VZW_G900VVRU1ANE9_G900VVZW1ANE9_1556536_REV00_user_low_ship_MULTI_CERT.tar.md5
ALL_VZW_G900VVRU1ANHA_G900VVZW1ANHA_2525521_REV00_user_low_ship_MULTI_CERT.tar.md5
ALL_VZW_G900VVRU1ANI2_G900VVZW1ANI2_2525521_REV00_user_low_ship_MULTI_CERT.tar.md5
I have also attempted to reset the PIT with: KLTE_USA_VZW ( I tried this after the first software package did not correct the issue and did some more research)
After doing all of the above I still get the “System software not authorized by Verizon Wireless has been found on your phone.”
I attempted to use
G900VVRU1BOA8_G900VVZW1BOA8_G900VVRU1BOA8_HOME - which is 5.0 and I am downloading this from Sammobile.com as I type to try instead.
On 5.0 i get a different error instead reading:
Start Up Failed
Your device didn't start up successfully. Use the Verizon software repair assistant on a computer to repair your device.
Above this error message in red text reads: Secure Fail: Modem
I can not use kies as the device is recognized but says it is not supported.
Please note: I did purchase this device knowing the first error message thinking it would just be a simple re-flash back to stock.
My Background: I have worked in the mobile business as a Sprint tech for 2 years and now work for a private company in computer and mobile repair so a total of 3 1/2 years mobile experience. However, I have not run into an issue like this before.
Again any help is much appreciated as this one has me stumped on what to try next
Click to expand...
Click to collapse
tan0892 said:
Update:
I have downloaded the firmware G900VVRU1BOA8_G900VVZW1BOA8_VZW from sammobile.com
When flashing with odin i get the same error " Your device didn't start up successfully......"
Also, I attempted to update from zip and I received an error "E footer is wrong" and "E signature verification failed"
Again any suggestion are appreciated.
Click to expand...
Click to collapse
Try a factory data reset and clear cache from the stock recovery. You can also try Nand Erase All and Phone EFS Clear in Odin with the tar and pit files..
clarification
I have never done a Nand Erase All and a bit hesitant to do so with out clarification.
Is the suggestion to have the full tar file.
G900VVRU1BOA8_G900VVZW1BOA8_VZW.tar in AP
KLTE_USA_VZW.pit in PIT
and have the following
Auto Reboot
F. Reset Time
Nand Erase All
Phone EFS Clear
Then click start?
Misterxtc said:
Try a factory data reset and clear cache from the stock recovery. You can also try Nand Erase All and Phone EFS Clear in Odin with the tar and pit files..
Click to expand...
Click to collapse
tan0892 said:
I have never done a Nand Erase All and a bit hesitant to do so with out clarification.
Is the suggestion to have the full tar file.
G900VVRU1BOA8_G900VVZW1BOA8_VZW.tar in AP
KLTE_USA_VZW.pit in PIT
and have the following
Auto Reboot
F. Reset Time
Nand Erase All
Phone EFS Clear
Then click start?
Click to expand...
Click to collapse
Yes that should do it for you. I forgot exactly what Nand erases but it won't hurt, I've done it many times.
Still failed with same error messages. I have tried this with ALL_VZW_G900VVRU1ANHA_G900VVZW1ANHA_2525521_REV00_user_low_ship_MULTI_CERT.tar.md5 and G900VVRU1BOA8_G900VVZW1BOA8_VZW with no luck.
Misterxtc said:
Yes that should do it for you. I forgot exactly what Nand erases but it won't hurt, I've done it many times.
Click to expand...
Click to collapse
tan0892 said:
Still failed with same error messages. I have tried this with ALL_VZW_G900VVRU1ANHA_G900VVZW1ANHA_2525521_REV00_user_low_ship_MULTI_CERT.tar.md5 and G900VVRU1BOA8_G900VVZW1BOA8_VZW with no luck.
Click to expand...
Click to collapse
I would take it to a Verizon or BestBuy store and see if they will try seeing that this isn't working for you.
Update 2
Best Buy - can not do anything with it.
Verizon- Since I am prepaid and never had this device on this line they can not help
Samsung - offered me to send in the device to be re flashed. However, it is "out of warranty" due to more then 1 year old manufacture. --- Yes it was released April 11 2014 and I explained this to the friendly fella on the other line for about 45 minutes till he got me to his supervisor. Which then told me the only person that can over ride the out of warranty statues is the repair service center. The flash would be free. However, if anything is physically wrong with the device it will not be covered. With how non of the flash seem to work I am leaning towards this being a failure with the on board storage.
If any one has any suggestions before Monday please let me know otherwise I will send the phone in to see what Samsung has to say. I will update the posting once I find out more. .
tan0892 said:
Best Buy - can not do anything with it.
Verizon- Since I am prepaid and never had this device on this line they can not help
Samsung - offered me to send in the device to be re flashed. However, it is "out of warranty" due to more then 1 year old manufacture. --- Yes it was released April 11 2014 and I explained this to the friendly fella on the other line for about 45 minutes till he got me to his supervisor. Which then told me the only person that can over ride the out of warranty statues is the repair service center. The flash would be free. However, if anything is physically wrong with the device it will not be covered. With how non of the flash seem to work I am leaning towards this being a failure with the on board storage.
If any one has any suggestions before Monday please let me know otherwise I will send the phone in to see what Samsung has to say. I will update the posting once I find out more. .
Click to expand...
Click to collapse
What they mean by physically wrong is if there is water damage or something that YOU did. If the phone crapped out and blew a capacitor then they should still cover it.
Also they would call you and ask if you wanted to go through the repair if there was damage in which case you would decline and ask them to send it back
Sent from my SM-G900V using XDA Free mobile app
harrytery said:
What they mean by physically wrong is if there is water damage or something that YOU did. If the phone crapped out and blew a capacitor then they should still cover it.
Also they would call you and ask if you wanted to go through the repair if there was damage in which case you would decline and ask them to send it back
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
Nope the phone is in good shape no cracks/liquid damage.
However, the system that Samsung has shows the phone out of warranty which is on my RMA ticket too and that's what I debated with their phone rep about for 45 minutes since release date was April 11 2014.
*02/12/2015//20:04:53//0001773863//Telephone//ASC*
2/12/2015 7:04 PM-Chien Tran: The unit is shipped.
*02/12/2015//18:34:06//0001773863//Telephone//ASC*
2/12/2015 5:33 PM-PBA Inspection: The unit has left the technician. SOLUTION: BER
*02/12/2015//18:34:05//0001773863//Telephone//ASC*
DEVICE ROOTED/Software not authorized has been found on device
*02/12/2015//09:14:28//0001773863//Telephone//ASC*
2/12/2015 8:13 AM-Degitu Yismaw: The unit has been received. Pack Condition: Fair Packaging (Box & Cushion)
thread from Samsung tracking
I am guessing this means it is bricked and Samsung will not help.
I should be getting the phone next week. Any other suggestions appreciated.
Hey man let's try to help each other out... I'm also in the same exact situation...
My phone keeps rebooting to the "Samsung powered by Android" logo and turns off and then repeats it again until I take out the battery.
I can't even download the stock 5.0 file from the samsung website because my internet is too slow...
Try only clicking "auto reboot" and "reset time F" and run the "G900VVRU1BOA8_G900VVZW1BOA8_VZW.tar.md5" file on AP.
Btw, do you have the unzipped file by any chance?
jkim204 said:
Hey man let's try to help each other out... I'm also in the same exact situation...
My phone keeps rebooting to the "Samsung powered by Android" logo and turns off and then repeats it again until I take out the battery.
I can't even download the stock 5.0 file from the samsung website because my internet is too slow...
Try only clicking "auto reboot" and "reset time F" and run the "G900VVRU1BOA8_G900VVZW1BOA8_VZW.tar.md5" file on AP.
Btw, do you have the unzipped file by any chance?
Click to expand...
Click to collapse
Sammobile site is slow because they want you to pay for the faster downloads.
I have downloaded 1 from sammobile.com as well overnight but didn't do anything different for my issue.
Your's sounds a bit different. If you can get one of these stock full tar files you should be good to flash in ODIN.
If that doesn't work do a reset/wipe device with Home + Vol Up + Power before and after flash sometimes helps
This thread has some good links to stock tar with everything.
http://forum.xda-developers.com/showpost.php?p=53447942
galaxy S5 sm-g900v firmware problem
hey man mine do the same , SM-G900V its a samsung from verizon, i just bought it because i thought it was a software problem,
it keeps rebooting and on the startup screen appears a padlock and it say "COSTUM"
sometimes it keeps a few minutes on, somtimes its frozen and restart,
This is crazy, right now i live in the dominican republik, and i dont know if i must send it to verizon
temd said:
hey man mine do the same , SM-G900V its a samsung from verizon, i just bought it because i thought it was a software problem,
it keeps rebooting and on the startup screen appears a padlock and it say "COSTUM"
sometimes it keeps a few minutes on, somtimes its frozen and restart,
This is crazy, right now i live in the dominican republik, and i dont know if i must send it to verizon
Click to expand...
Click to collapse
Sorry to all that had this problem and didn't find a fix but to those that still have a Verizon s5 this may help.
I had the same problem with this S5 I'm playing with and I fix it by using odin3 v3.10 to flash the kernel again.
Dropped the Kernel the AP in odin. Everything was still there after i flashed it pic's / text and app all still there.
And the COSTUM on the screen means you have unlocked the kernel and one need to be flash.
hit thanks if this help
sounds to me like you guys have the wrong bootloader and are trying to downgrade to older firmware than the bootloader will allow. Try downloading one of the latest 6.0 firmware packages and flash that. I would imagine that will solve your issue.
im at my witts end. I have a galaxy s5 sm-g900t3 firmware 6.01 that I brought from a guy on CL.long story short. he didn't remember his gmail info n now I cant do anything with the phone due to frp....this has been a month long battle with me trying to find the answer.
1. sidesync did nor recognize phone
2. odin .....tried to downgrade fw in hopes of bypassing frp ....odin error "nand write start!fail auth.....when I look at the phone,it says "sw rev check fail [abot] fused3> binary
3.Otb cable......my otb cable did nothing when plugged into my phone with mem card.
4.Realterm...after putting command [atd number ;\r\n] I was directed to go to http goo.gl /hk80wd........"your request has been denied for security reasons"
im trying to upload pics to clarify.
please someone give me a hand?
iszak76 said:
im at my witts end. I have a galaxy s5 sm-g900t3 firmware 6.01 that I brought from a guy on CL.long story short. he didn't remember his gmail info n now I cant do anything with the phone due to frp....this has been a month long battle with me trying to find the answer.
1. sidesync did nor recognize phone
2. odin .....tried to downgrade fw in hopes of bypassing frp ....odin error "nand write start!fail auth.....when I look at the phone,it says "sw rev check fail [abot] fused3> binary
3.Otb cable......my otb cable did nothing when plugged into my phone with mem card.
4.Realterm...after putting command [atd number ;\r\n] I was directed to go to http goo.gl /hk80wd........"your request has been denied for security reasons"
im trying to upload pics to clarify.
please someone give me a hand?
Click to expand...
Click to collapse
i ran into this when i was trying to fix mt dads S5 and i wasnt able to get around it. Had to get his samsung account credentials to log in and get past it. Im not sure what luck youre gonna have without paying for it by a third party service like isoneapps.com. I know they can do it, but ive searched for the exact same thing with no luck.
Please help me. I have battled and I’m at my wits end. Anything is possible.I am in desperate need of a phone.I brought a phone off of Craigslist that is googled lock. I will enclosed screenshots. After some reading it seems that I was blessed with a phone that has factory reset protection.This protection is incredible.please,I know there is a way to do this because there are a couple guys that advertise unlocking frp phones for 100.00 bucks. Can’t pay that.
The phone is a Samsung galaxy s5 tmobile sm-g900t3 firmware g900t3uvsgpi1 6.01
1.i used sidesync ….it didn’t recognize the phone.
2. I tried using Odin to downgrade the firmware in hopes of removing frp.i was giving the error in Odin “nand write start! Fail auth. The phone screen showed sw rev check fail [abot] fused 3> binary
3.i tried 2Otb cables. Neither was recognized by the phone.
4.i got closest with real term.after I inserted “atd 123 ;\r\n
I was directed to ]http. ://goo .gl/ hk80wd.....after hitting enter...
I received the msg..” your request has been denied for security reasons “
Please help me defeat this issue.
Hello guys,
I bought a soft bricked S7 Edge with a dm-verity error because I thought I could easily fix the issue myself. The previous owner said he went to update the samsung software via android and this happened. But it doesn't seem too easy to fix. I've tried a bunch of different solutions I found on the interwebs but none have worked so far. I would appreciate some help because I don't seem to be making any progress.
EDIT: I've read that some people have reported losing their IMEI after an OTA update. Maybe that is what happened?
NOTE: I do NOT get the "failed to mount /efs" error
When I got the phone, it would boot directly into Android Recovery with a dm-verity error on the bottom. So here is what I tried:
1 . First I did the obvious, facotry reset and wipe partition. No change.
2. Downloaded the firmware with SamFirm (SM-G935F Regin ZTO) and flashed with Odin. It then booted into a screen with a hazard sign and a DRK error. Then returned to Android Recovery. Observation: When I extracted the firmware, I got a strange corrupted error. I downloaded it again, same corruption error. Is that normal? Also, I am not certain the region is ZTO, maybe this phone is from some other region. Does it matter?
3. I flashed the same firmware again. This time the phone booted up to a Samsung error that said to use SmartSwitch's Emergency recovery. I tried but it asks for a recovery code and I don't have one.
4. I tried to flash CF-autoroot but it gave an error in Odin and failed. EDIT: failed because "Blocked by FRP Lock" but I can't unlock the OEM like everyone else because I can't boot normally into android. Any workaround?
5. I downloaded firmware from a different region (UK). I got a DRK error and it booted into Android recovery. The bottom of the phone reads:
No Support SINGLE-SKUSupported API: 3dm-verity error...failed code : 0x02
6. I flashed the combination file and was able to boot into Factory Binary. I went into Settings to unlock OEM but there isn't that option in the Developer Settings!
That's where I am now. Any ideas?
Thanks!
Are you sure that it is an original 935F?
Pet1981 said:
Are you sure that it is an original 935F?
Click to expand...
Click to collapse
On the back of the phone, its has the model number written like this SM-G935F SAMSUNG YATELEY GU46 6GG UK. Is there someway for this to be wrong?
dleeII said:
On the back of the phone, its has the model number written like this SM-G935F SAMSUNG YATELEY GU46 6GG UK. Is there someway for this to be wrong?
Click to expand...
Click to collapse
Samsung Yateley is Samsung's official UK QA facility, they only receive official products direct from the factories and those sent back for repair and refurbishment. I know this because it's literally just down the road from my house and a couple of friends have worked there over the years.
However, "SAMSUNG YATELEY GU46 6GG UK" has been on literally millions of devices worldwide for years.
It's not a reliable Indication of a genuine product or in fact an indication of anything other than the fact that Samsung have a facility in Yateley.
If the device is a refurb or even a fake it's entirely possible that it only says "SM-G935F SAMSUNG YATELEY GU46 6GG UK" because that's what it's supposed to say.
I'm sorry that I can't be of any more help but, I hope I've helped by stopping you from embarking on a wild goose chase.
X1ras said:
Samsung Yateley is Samsung's official UK QA facility, they only receive official products direct from the factories and those sent back for repair and refurbishment. I know this because it's literally just down the road from my house and a couple of friends have worked there over the years.
However, "SAMSUNG YATELEY GU46 6GG UK" has been on literally millions of devices worldwide for years.
It's not a reliable Indication of a genuine product or in fact an indication of anything other than the fact that Samsung have a facility in Yateley.
If the device is a refurb or even a fake it's entirely possible that it only says "SM-G935F SAMSUNG YATELEY GU46 6GG UK" because that's what it's supposed to say.
I'm sorry that I can't be of any more help but, I hope I've helped by stopping you from embarking on a wild goose chase.
Click to expand...
Click to collapse
I flashed the combination software and in the Factory Binary, it says MODEL: SM-G935F [SS]. Is the information reliable? Is there a possibility that the phone is fake? If so, is there a way to tell for sure?
EDIT: I checked the IMEI I got from the Factory Binary at IMEI.info and it seems to be valid.
I don't know
THIS
can help you or not
Try to use z3x box i read some function of z3x box but i'm not sure if it will fix your phone. Just go to gsm-forum for more details.
I thought this error message you're getting is because you flashed something on your phone intended for another model. I got the same error when I first got my S7 Edge because I stupidly thought I had the snapdragon variant when in fact the G935F is the Exynos variant. I got exactly the same error message. Have you tried reflashing stock firmware via Odin? Have you checked the Knox trip counter to see if the phone had been tampered with prior to you buying it? I live a stone's throw away from Yateley (5 mins maximum) if you want me to pop in and enquire?
Sent from my SM-G935F using XDA-Developers Legacy app
Sorry for the delayed response. I left my phone with some technicians with a ZX3 and Octopus Box and they were unable to fix the phone. But they didn't seem very interested either so maybe they just blew me off. Not sure. I'll try to find someone else soon.
speedyjay said:
I thought this error message you're getting is because you flashed something on your phone intended for another model. I got the same error when I first got my S7 Edge because I stupidly thought I had the snapdragon variant when in fact the G935F is the Exynos variant. I got exactly the same error message. Have you tried reflashing stock firmware via Odin? Have you checked the Knox trip counter to see if the phone had been tampered with prior to you buying it? I live a stone's throw away from Yateley (5 mins maximum) if you want me to pop in and enquire?
Sent from my SM-G935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
This may be the problem. I have tried flashing the stock firmware with Odin but maybe I'm flashing the snapdragon variant instead of the exynos. How can I tell the difference?
My warranty is 1 (0x0500). That means that Knox was tripped right?
mashardpro said:
I don't know
THIS
can help you or not
Click to expand...
Click to collapse
I've tried this guide and it didn't solve the issue.
I tried flashing a Snapdragon firmware and it failed. So I assume a Exynos firmware is the correct one.
dleeII said:
I tried flashing a Snapdragon firmware and it failed. So I assume a Exynos firmware is the correct one.
Click to expand...
Click to collapse
G935F is exynos yes
Have you tried OEM unlock via adb if possible?
Then flash twrp and https://build.nethunter.com/android-tools/no-verity-opt-encrypt/no-verity-opt-encrypt-5.0.zip ?
Sorry if it's not possible just brainstorming ..
misterashman said:
G935F is exynos yes
Have you tried OEM unlock via adb if possible?
Then flash twrp and https://build.nethunter.com/android-tools/no-verity-opt-encrypt/no-verity-opt-encrypt-5.0.zip ?
Sorry if it's not possible just brainstorming ..
Click to expand...
Click to collapse
No, I haven't tried that yet. How do I access the S7 via adb again? Is it in download mode or in the recovery? Samsungs don't have "fastboot" right?
I'm in the exact same situation, it's FRP locked to me but I can't get passed the DM-Verity to unlock nor root to pass DM-Verity. Hard to believe this could be bricked from a software issue.
---------- Post added at 05:14 PM ---------- Previous post was at 04:44 PM ----------
dleeII said:
No, I haven't tried that yet. How do I access the S7 via adb again? Is it in download mode or in the recovery? Samsungs don't have "fastboot" right?
Click to expand...
Click to collapse
Did you ever find a solution?
Hey, I was able to unbrick the phone. But I had to take it to a technician that used a very interesting technique to reset the phone. Apparently, someone had tried to flash another IMEI on the phone. To reset the device, he switched out one of the memories (there are 3 or 4 slots). Then when you boot up the phone, it is tricked into thinking you are booting up for the first time. At leas that is what I understood. Maybe someone more familiar with phone hardware could explain the solution better.
Rymcbc said:
I'm in the exact same situation, it's FRP locked to me but I can't get passed the DM-Verity to unlock nor root to pass DM-Verity. Hard to believe this could be bricked from a software issue.
---------- Post added at 05:14 PM ---------- Previous post was at 04:44 PM ----------
Did you ever find a solution?
Click to expand...
Click to collapse
Did you ever find a solution?
dleeII said:
Hello guys,
I bought a soft bricked S7 Edge with a dm-verity error because I thought I could easily fix the issue myself. The previous owner said he went to update the samsung software via android and this happened. But it doesn't seem too easy to fix. I've tried a bunch of different solutions I found on the interwebs but none have worked so far. I would appreciate some help because I don't seem to be making any progress.
EDIT: I've read that some people have reported losing their IMEI after an OTA update. Maybe that is what happened?
NOTE: I do NOT get the "failed to mount /efs" error
When I got the phone, it would boot directly into Android Recovery with a dm-verity error on the bottom. So here is what I tried:
1 . First I did the obvious, facotry reset and wipe partition. No change.
2. Downloaded the firmware with SamFirm (SM-G935F Regin ZTO) and flashed with Odin. It then booted into a screen with a hazard sign and a DRK error. Then returned to Android Recovery. Observation: When I extracted the firmware, I got a strange corrupted error. I downloaded it again, same corruption error. Is that normal? Also, I am not certain the region is ZTO, maybe this phone is from some other region. Does it matter?
3. I flashed the same firmware again. This time the phone booted up to a Samsung error that said to use SmartSwitch's Emergency recovery. I tried but it asks for a recovery code and I don't have one.
4. I tried to flash CF-autoroot but it gave an error in Odin and failed. EDIT: failed because "Blocked by FRP Lock" but I can't unlock the OEM like everyone else because I can't boot normally into android. Any workaround?
5. I downloaded firmware from a different region (UK). I got a DRK error and it booted into Android recovery. The bottom of the phone reads:
No Support SINGLE-SKUSupported API: 3dm-verity error...failed code : 0x02
6. I flashed the combination file and was able to boot into Factory Binary. I went into Settings to unlock OEM but there isn't that option in the Developer Settings!
That's where I am now. Any ideas?
Thanks!
Click to expand...
Click to collapse
You tried smart switch if identify the device and instal stock rom?
bricked S7 Edge with a dm-verity error
dleeII said:
Hello guys,
I bought a soft bricked S7 Edge with a dm-verity error because I thought I could easily fix the issue myself. The previous owner said he went to update the samsung software via android and this happened. But it doesn't seem too easy to fix. I've tried a bunch of different solutions I found on the interwebs but none have worked so far. I would appreciate some help because I don't seem to be making any progress.
EDIT: I've read that some people have reported losing their IMEI after an OTA update. Maybe that is what happened?
NOTE: I do NOT get the "failed to mount /efs" error
When I got the phone, it would boot directly into Android Recovery with a dm-verity error on the bottom. So here is what I tried:
1 . First I did the obvious, facotry reset and wipe partition. No change.
2. Downloaded the firmware with SamFirm (SM-G935F Regin ZTO) and flashed with Odin. It then booted into a screen with a hazard sign and a DRK error. Then returned to Android Recovery. Observation: When I extracted the firmware, I got a strange corrupted error. I downloaded it again, same corruption error. Is that normal? Also, I am not certain the region is ZTO, maybe this phone is from some other region. Does it matter?
3. I flashed the same firmware again. This time the phone booted up to a Samsung error that said to use SmartSwitch's Emergency recovery. I tried but it asks for a recovery code and I don't have one.
4. I tried to flash CF-autoroot but it gave an error in Odin and failed. EDIT: failed because "Blocked by FRP Lock" but I can't unlock the OEM like everyone else because I can't boot normally into android. Any workaround?
5. I downloaded firmware from a different region (UK). I got a DRK error and it booted into Android recovery. The bottom of the phone reads:
No Support SINGLE-SKUSupported API: 3dm-verity error...failed code : 0x02
6. I flashed the combination file and was able to boot into Factory Binary. I went into Settings to unlock OEM but there isn't that option in the Developer Settings!
That's where I am now. Any ideas?
Thanks!
Click to expand...
Click to collapse
I Also Have this problem with Samsung SM-G935F
I Solved This Problem With Small Trick
1. Flash Phone With Official Firmware
2. Flash Twrp Recovery
3. Wipe All Data Leave System
4. Reboot
Now I got My device back Alive
You Can Try May Be Its Works For You
I tried the same and my fone booted but its very unstable with crashing apps and random restarts...
With smart switch it ends into dm varity verification hash tree error or dm-varity error
Any solutions...
Please check my answer for the S8+ I believe it should be the same process.
https://forum.xda-developers.com/showpost.php?p=75342726&postcount=10
Good Luck
Hi,
I did a search here for anything to do with (SM-G950W) and saw 10 threads about this model but I am unable to find a thread that has a solution to my problem. I have read posts about using Odin v3.12.7 and putting the phone into download mode then flash the PDA (now called AP) with a combination .MD5 file that is compatible for (SM-G950W). I tried flashing with a stock AP, one from a stock SM-G950U and several others that I have found from Google search and all I get from Odin is "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1". I made sure I had the latest version (as of writing this post) of the Samsung USB Driver with version 1.5.63.0 so does anyone know how I can bypass the FRP (factory reset protection)? I see lots of Youtube videos about using a bluetooth device and calling emergency but I will avoid this method. I should also mention that the "download" screen does show FRP lock enabled if that matters (is this KNOX?).
I am trying to help my friend fix this problem because he locked himself out of his phone so I am out of ideas and for whatever reason he does not remember the last Google account that was synced with his phone. We tried all the emails that "he" thinks it is and when we put in his cell phone # the recovery said it will send us the verification code but it fails.
Any help would be appreciated and thanks to those who replied.
EDIT:
I got Odin to flash the phone now. I had to use Canada (Rogers), version 7.0, PDA - (G950WVLU2AQK7), CSC - (G950WOYA2AQK7), date 2017-12-10 from SamMobile website. I wanted to flash the XAC version to remove Rogers branding but I kept getting the "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1" error. Anyway, the phone rebooted back to FRP (factory reset protection) screen to enter a Google account. So back to square one unless someone knows which file I need to flash in order to bypass or unlock FRP.
Thanks,
htcraspy said:
Hi,
I did a search here for anything to do with (SM-G950W) and saw 10 threads about this model but I am unable to find a thread that has a solution to my problem. I have read posts about using Odin v3.12.7 and putting the phone into download mode then flash the PDA (now called AP) with a combination .MD5 file that is compatible for (SM-G950W). I tried flashing with a stock AP, one from a stock SM-G950U and several others that I have found from Google search and all I get from Odin is "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1". I made sure I had the latest version (as of writing this post) of the Samsung USB Driver with version 1.5.63.0 so does anyone know how I can bypass the FRP (factory reset protection)? I see lots of Youtube videos about using a bluetooth device and calling emergency but I will avoid this method. I should also mention that the "download" screen does show FRP lock enabled if that matters (is this KNOX?).
I am trying to help my friend fix this problem because he locked himself out of his phone so I am out of ideas and for whatever reason he does not remember the last Google account that was synced with his phone. We tried all the emails that "he" thinks it is and when we put in his cell phone # the recovery said it will send us the verification code but it fails.
Any help would be appreciated and thanks to those who replied.
EDIT:
I got Odin to flash the phone now. I had to use Canada (Rogers), version 7.0, PDA - (G950WVLU2AQK7), CSC - (G950WOYA2AQK7), date 2017-12-10 from SamMobile website. I wanted to flash the XAC version to remove Rogers branding but I kept getting the "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1" error. Anyway, the phone rebooted back to FRP (factory reset protection) screen to enter a Google account. So back to square one unless someone knows which file I need to flash in order to bypass or unlock FRP.
Thanks,
Click to expand...
Click to collapse
Use a tool like chimera tool you'll be able to get past that no problem. Should be able to anyway. 99% of people on these forums will automatically brand you a thief because nobody here apparently forgets their login account info and are otherwise perfect citizens
Try this guide http://www.techoxygen.com/samsung-frp-tool-2017-reset-frp-lock-free/
thatsupnow said:
Use a tool like chimera tool you'll be able to get past that no problem. Should be able to anyway. 99% of people on these forums will automatically brand you a thief because nobody here apparently forgets their login account info and are otherwise perfect citizens
Try this guide http://www.techoxygen.com/samsung-frp-tool-2017-reset-frp-lock-free/
Click to expand...
Click to collapse
First off, thank you for being helpful. I even invited myself to the telegram group "Galaxy S8/S8+ (XDA Group)" to ask for help there too and some people was not as helpful by telling us that it would be impossible to forget the login. Seriously, I could have laughed at my friend and call him dumb but I didn't because he came to me for help. I searched and read so many forums and downloaded so many different files from legal websites to understand what to do but I couldn't get it resolved.
I will try the "chimera" tool that you suggested and if that doesn't work then we will just give up and bring the phone to a repair shop. I spoke to someone at Google today who said gmail password resets may take up to 24 hours for the phone to recognize. So we will try again with the 3 gmail accounts that we think was synced with the phone tomorrow because the passwords was just reset today however the representative said Samsung might be able to help so he transferred us to the Samsung in the U.S. (by mistake?) and the girl from Samsung transferred us to Samsung Canada. What a run around; anyway the last person said we may need to bring it to a repair shop. The person asked us for our postal code and gave us a few shops in our area.
Crossing our fingers that the "chimera" tool works otherwise we're probably looking at $50-$60 CAD for the phone repair shop to fix this issue.
Thanks again!
thatsupnow said:
Use a tool like chimera tool you'll be able to get past that no problem. Should be able to anyway. 99% of people on these forums will automatically brand you a thief because nobody here apparently forgets their login account info and are otherwise perfect citizens
Try this guide http://www.techoxygen.com/samsung-frp-tool-2017-reset-frp-lock-free/
Click to expand...
Click to collapse
So I installed chimera and it doesn't list SM-G950W as an available model to reset the FRP. Do I need an update or do I need to buy something to get more supported models? Also I looked at "http://www.techoxygen.com/samsung-fr...frp-lock-free/" and downloaded the "Octoplus Samsung Tool" the download file came with a trojan virus which got removed by antivirus program. Now when I try to open the Octoplus tool it is saying that the "Card is not found". What does that mean? Sorry I never done this before so I am not familiar with these terms.
htcraspy said:
So I installed chimera and it doesn't list SM-G950W as an available model to reset the FRP. Do I need an update or do I need to buy something to get more supported models? Also I looked at "http://www.techoxygen.com/samsung-fr...frp-lock-free/" and downloaded the "Octoplus Samsung Tool" the download file came with a trojan virus which got removed by antivirus program. Now when I try to open the Octoplus tool it is saying that the "Card is not found". What does that mean? Sorry I never done this before so I am not familiar with these terms.
Click to expand...
Click to collapse
Give this a shot
If that doesn't work go to YouTube and search bypass frp lock SM-G950W. You'll get it eventually
thatsupnow said:
Give this a shot
If that doesn't work go to YouTube and search bypass frp lock SM-G950W. You'll get it eventually
Click to expand...
Click to collapse
Thanks for your help. We tried watching the videos but our Samsung S8 does not have a home button. Anyway, we decided to go to a local phone repair shop and they charged us $80 to reset the lock. We had to wait a bit because the Samsung server was down but at least we got our phone working again.
Also if anyone is wondering about the chimera tool and support for Samsung S8 this is the response I got from their support team:
Dear User,
Yes, currently it is not supported. The FRP reset is not added for the S8 models.Of course we will add it, in the near future. When? right now i can not tell you exact date, but i am sure that we can handle it soon.
Best regards,
Chimera team
htcraspy said:
Thanks for your help. We tried watching the videos but our Samsung S8 does not have a home button. Anyway, we decided to go to a local phone repair shop and they charged us $80 to reset the lock. We had to wait a bit because the Samsung server was down but at least we got our phone working again.
Also if anyone is wondering about the chimera tool and support for Samsung S8 this is the response I got from their support team:
Dear User,
Yes, currently it is not supported. The FRP reset is not added for the S8 models.Of course we will add it, in the near future. When? right now i can not tell you exact date, but i am sure that we can handle it soon.
Best regards,
Chimera team
Click to expand...
Click to collapse
Right on at least you got it going again. I just kinda assumed chimera tool supported that cause I've been using it for years on my other galaxy phones and was unlocking a whole bunch of other phones for $10 a pop.
I have same problem with my sm-g950w and don't want to pay 80$ at phone repair shop
hopefully if I wait a little, more option will become available for the frp reset
if anyone has any more options, please let me know
thatsupnow said:
Use a tool like chimera tool you'll be able to get past that no problem. Should be able to anyway. 99% of people on these forums will automatically brand you a thief because nobody here apparently forgets their login account info and are otherwise perfect citizens
Try this guide http://www.techoxygen.com/samsung-frp-tool-2017-reset-frp-lock-free/
Click to expand...
Click to collapse
It's not that everyone thinks that, it's that there is no way to tell from a forum post, and rather than risk making xda complicit in a felony it's safer and fairer to just not answer any of them on the board where there is an official record. Just wait until some judge subpones all of xdas servers because they hold official records in an ongoing criminal case
htcraspy said:
Hi,
I did a search here for anything to do with (SM-G950W) and saw 10 threads about this model but I am unable to find a thread that has a solution to my problem. I have read posts about using Odin v3.12.7 and putting the phone into download mode then flash the PDA (now called AP) with a combination .MD5 file that is compatible for (SM-G950W). I tried flashing with a stock AP, one from a stock SM-G950U and several others that I have found from Google search and all I get from Odin is "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1". I made sure I had the latest version (as of writing this post) of the Samsung USB Driver with version 1.5.63.0 so does anyone know how I can bypass the FRP (factory reset protection)? I see lots of Youtube videos about using a bluetooth device and calling emergency but I will avoid this method. I should also mention that the "download" screen does show FRP lock enabled if that matters (is this KNOX?).
I am trying to help my friend fix this problem because he locked himself out of his phone so I am out of ideas and for whatever reason he does not remember the last Google account that was synced with his phone. We tried all the emails that "he" thinks it is and when we put in his cell phone # the recovery said it will send us the verification code but it fails.
Any help would be appreciated and thanks to those who replied.
EDIT:
I got Odin to flash the phone now. I had to use Canada (Rogers), version 7.0, PDA - (G950WVLU2AQK7), CSC - (G950WOYA2AQK7), date 2017-12-10 from SamMobile website. I wanted to flash the XAC version to remove Rogers branding but I kept getting the "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1" error. Anyway, the phone rebooted back to FRP (factory reset protection) screen to enter a Google account. So back to square one unless someone knows which file I need to flash in order to bypass or unlock FRP.
Thanks,
Click to expand...
Click to collapse
Ok trying to help here, if you already flashed the phone with version 7 its means will get easy to bypass the G account, just there are a lot of videos on you tube but the easiest one is in spanish.. (freedom phone) the name of the you tuber, if not there are more in english..
Android 7 allow you to update the keyboard which is necessary in order to complete the task, it will take just 10 minutes I did one T mobile but it will work with the canadian one as long as the phone has the version 7.. btw i am downloading the rogers firmware to flash my canadian one.. thanks for the tip..
XDA never encourages this "fishy" applications for some really really desperate people that needs help.
Samsung repair centre can fix your FRP Locked phone. Just present your Proof of purchase/receipt/ warranty card and of course your phone
So you can use your phone again.
FRP security is implemented to prevent unauthorized access on your phone.
So make sure you don't forget your main google account logged in on your phone.
It is really recommended that you have "MULTIPLE WAYS" of retrieving your Google account
Make sure your G Account has
(
1. phone number
2. recovery email
3. provided security
4. Q&A
5. Google recovery page ( you need to answer personal info/identity you can remember)
)
htcraspy said:
Hi,
I did a search here for anything to do with (SM-G950W) and saw 10 threads about this model but I am unable to find a thread that has a solution to my problem. I have read posts about using Odin v3.12.7 and putting the phone into download mode then flash the PDA (now called AP) with a combination .MD5 file that is compatible for (SM-G950W). I tried flashing with a stock AP, one from a stock SM-G950U and several others that I have found from Google search and all I get from Odin is "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1". I made sure I had the latest version (as of writing this post) of the Samsung USB Driver with version 1.5.63.0 so does anyone know how I can bypass the FRP (factory reset protection)? I see lots of Youtube videos about using a bluetooth device and calling emergency but I will avoid this method. I should also mention that the "download" screen does show FRP lock enabled if that matters (is this KNOX?).
I am trying to help my friend fix this problem because he locked himself out of his phone so I am out of ideas and for whatever reason he does not remember the last Google account that was synced with his phone. We tried all the emails that "he" thinks it is and when we put in his cell phone # the recovery said it will send us the verification code but it fails.
Any help would be appreciated and thanks to those who replied.
EDIT:
I got Odin to flash the phone now. I had to use Canada (Rogers), version 7.0, PDA - (G950WVLU2AQK7), CSC - (G950WOYA2AQK7), date 2017-12-10 from SamMobile website. I wanted to flash the XAC version to remove Rogers branding but I kept getting the "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1" error. Anyway, the phone rebooted back to FRP (factory reset protection) screen to enter a Google account. So back to square one unless someone knows which file I need to flash in order to bypass or unlock FRP.
Thanks,
Click to expand...
Click to collapse
If this helps you i have the SM-G950W (G950WVLS3BRE1) and i made it work by flashing the COMBINATION_FA70_G950USQU3ARD1 first then i flashed the firmware 4 file G950USQU3CRD4 using BL+AP+CP+HOME_CSC+USERDATA and it worked beautifully. Maybe it will help your issue.
Flashing SMG950W
Hi,
I am new to this forum and need some help please.
I have a Samsung S8 (G950WVLU5BRG4) with Android Version 8.0. The phone is unlocked and from Rogers in Canada but has a Google FRP.
Although I followed the step by step instructions with the combination file and so on Odin keeps showing me an error and is unable to bypass the Google account lock. The error message I am getting within log of the combination file is:
FAIL! (Auth)
Complete (Write) operation failed
All threads completed. (succeed 0/ failed 1)
Any idea of how to solve this problem? I am sure it got solved already by someone in the forum but I can't find the right entry.
ThorbenJa said:
Hi,
I am new to this forum and need some help please.
I have a Samsung S8 (G950WVLU5BRG4) with Android Version 8.0. The phone is unlocked and from Rogers in Canada but has a Google FRP.
Although I followed the step by step instructions with the combination file and so on Odin keeps showing me an error and is unable to bypass the Google account lock. The error message I am getting within log of the combination file is:
FAIL! (Auth)
Complete (Write) operation failed
All threads completed. (succeed 0/ failed 1)
Any idea of how to solve this problem? I am sure it got solved already by someone in the forum but I can't find the right entry.
Click to expand...
Click to collapse
Sounds like your flashing something older than what's the device
TheMadScientist said:
Sounds like your flashing something older than what's the device
Click to expand...
Click to collapse
As far as I know canadian S8 variant cannot be downgraded, i had tried everything with them with no avail,
there is a site(server bypassing the google account any model) for 22 usa dollars!! search it.. 22 dollars is nothing if your phone is an xpensive one!!
Virtualisimo said:
As far as I know canadian S8 variant cannot be downgraded, i had tried everything with them with no avail,
there is a site(server bypassing the google account any model) for 22 usa dollars!! search it.. 22 dollars is nothing if your phone is an xpensive one!!
Click to expand...
Click to collapse
No so you need a 950 U combo equal to that of what is on your device