So yesterday I got this phone and was really happy coz of it.
Tried rooting, but somehow managed to get into a bootloop. So flashe sbf and everything is fine.
Sbf i used was 2.3.6 Argentina as the same soft I had before and I read that on EMEA variant Verizon sbf is no go.
Than I rooted it again, everything went fine. Than I'd installed bootstrap CWM, made nandroid and flashed CM7.
All was still fine. Unfortunately I installed bootstrap again before reading that it will softbrick CM7 and that there is already an CWM within the CM.
So what could I do? I flashed sbf again - again the same 2.3.6 for Argentina I had before.
Since than I have "Code Corrupt" and can go past Bootloader menu - right after I insert the battery i boots to bootloader mode. Because of that I cannot get into Recovery or Safe Mode...
RSDlite flashes the firmware OK, but than fails on "Error switching phone to BP pass through mode(0x70BE)phone connected" and the Bootloader is still corrupted.
Any ideas?
I'm 100% sure that it is EMEA Droid Pro, so firmware is the one for this model.
Battery is OK. Program too. Bootloader version is 03.0C (v0x00030C).
Related
Alright so I was trying to update to the new Fission ROM but it had the whole audio bug thing so I reverted back and was going to update to .340 before flashing back over to fission. I downloaded the update zips for 340 but I didn't know that it was recommended to flash one, reboot, flash the other, etc. Which may be why I'm stuck at this screen..
It's just black and says
"Bootloader
30.04
Err:A5,70,39,00,27
Battery OK
OK to Program
Transfer Mode:
USB"
I've tried to SBF but it's still stuck there. Can't boot into recovery, nothing. Can anyone help? Or am I going to have to try and get verizon to replace my phone.
Edit: Just realized I clicked development instead of general. Oops. Sorry mods.
Edit 2: I fixed it. I'll leave this here for anyone who has the same problem. I had to SBF back to .320 instead of .340 and then boot into recovery and wipe data/cache.
I had the same problem. I sbf'd .340 and that worked for me.
Sent from my DROIDX using Tapatalk
Good to see you fixed it. The reason you had to SBF back to .320 was because it was a full SBF, and .340 has only been seen in System-Only form which does not include a bootloader.
I was running the Fission 2.4.3 rom and it was having some problems because I read that it was because I was running on 2.2.1 kernel and I downloaded 2.3.340 Kernel Updater (2.6.32.9-g55626e1) and BP_C_1.09.07P Baseband Updater (also known as your radio file) from http://www.mydroidworld.com/forums/...ystem-baseband-2-3-340-kernel-bootloader.html then I installed both of those, now when I boot up to the Bootloader 30.03, it says, err:A5,70,00,00,23 Battery OK OK to Program Connect USB Data Cable. The phone also lets me boot in to the stock recovery by pressing Power and Home. Please help me I need help and I cant figure it out.
You should be on Bootloader 30.04. I would suggest grabbing the full .320 SBF, and the system-only .340 SBF, then flashing them both in order. After flashing them both go into the Motorola recovery and do a factory reset.
-----
Sent from my Droid X. Powered by Big Red, customized by NATF.
How do I do the SBF thing if I can only get in to the Bootloader 30.03 screen and the stock recovery screen. I have the clockwork recovery installed but i cant get to it. HELP
SBF is done from the bootloader menu you are already in. This link will help you with the process. If you are still on the original Froyo OTA, you will need the .320 Full SBF, and the .340 System-Only SBF. I cannot provide links to them due to a C&D notice, but they are not hard to find using Google.
In desperate need of help here
I have a Razr M running 4.1.2 ( Recovered from Matt's Utility System Version 98.15.66) stock rom. Previously before the restore, I had an Unlocked BL, rooted, running Carbon ROM, however once I restored it, I can no longer flash roms, even with root (rooted with SuperUser) and CWM installed. When I go to AP fastboot I see the Status 3 Unlocked, but whenever I boot my phone/ try to flash a rom, the Red Motorola Logo shows up, and then it boots into stock.
Anyone know how to fix this?
TIA
Hi all,
I was trying to install cyanogenmod on a Samsung Note branded China Telecom, SM-N9009.
The first try was with the original fully updated phone, android 5.0. I managed to root it with odin and cf-autoroot, but I wasn't able to find a version of twrp o cw recovery for that phone.
The second try was downgrading the phone to android 4.4.2 (the less updated firmware i found here: on boycracked website
I rooted it again and installed cw recovery for the 9006 (following a thread on this forum). Then I was able to install cyanogen but the phone upon booting gives an error and goes automatically in download mode. Every time. It goes also in cw recovery, but even wiping data doesn't fix the boot problem. I guess the bootloader is somewhat stuck with the original china telecom one, and I have to bypass it. I tried to search how to unlock the bootloader, but as far as now I didn't find any solution.
How can I manage to do it?
Tried with a nightly build of cyanogenmod but no way again... the phone is still giving this damn error on boot and enters to download mode
is it impossible to work on this 9009?
hi all,
i decided to unroot my device and flashed stock firmware through odin, now when the phone restarts i get this error and the touch is unresponsive i am not able to enter app drawer and the it takes repeated attempts to get into power off menu.
what has happened did i miss some imp step, was i suppose to uncock bootlaader under usb debugging etc etc. i tried flashin fw without BL file still same error.
this was an ebay purchase UK unocked model, which i believed was flashed with indian nougat firmware which i again reflashed to G935FXXU1DPLT, OTA updated to G935FXXU1DQB3 prior to rooting.
not able to boot into recovery also
currently iam flashing G935FXXU1DPLT or am i supposed to flash G935FXXU1DQB3