hi all,
i decided to unroot my device and flashed stock firmware through odin, now when the phone restarts i get this error and the touch is unresponsive i am not able to enter app drawer and the it takes repeated attempts to get into power off menu.
what has happened did i miss some imp step, was i suppose to uncock bootlaader under usb debugging etc etc. i tried flashin fw without BL file still same error.
this was an ebay purchase UK unocked model, which i believed was flashed with indian nougat firmware which i again reflashed to G935FXXU1DPLT, OTA updated to G935FXXU1DQB3 prior to rooting.
not able to boot into recovery also
currently iam flashing G935FXXU1DPLT or am i supposed to flash G935FXXU1DQB3
Related
I recently bought a Defense Mobile (Radio Shack Prepaid, on store closing sale) GT-i9300i with the intentions on repurposing it on my ATT plan.
It presently has the ___AND1 (I can't remember the rest) baseband, 4.3 Stock rom, TTT region (trinidadtobango).
Anyway, I was able to use towelroot V1 to root it, install superSU from google play, intall superSU binary, ODIN TWRP or CWM, and boot to such , but then, after installing CM 11 or 12 (the unofficial ones by Rox), it reboots to the download screen, "normal boot failed"
FWIW I can ODIN the factory image back and then it boots back up, albeit 100% vanilla.
Any idea what needs to happen to make said roms work? Or did I somehow get one with a locked bootloader?
I went ahead and took the OTA update to 4.4.4... and rooted that. Same result, the only change being the installs from TWRP show as failed and the bootloader locks to the point of download mode not even working from button combo. However, I could get into TWRP and reboot to download mode from there, which did work, so I could odin over the newer image.
What gives?
Actually it was not known to me that my g901f was rooted. I just flashed it with NEE stock firmware lolipop, which eventually bricked the set.
I tried Smart Switch manual insertion of Model and S/N, but it says no database verification. So i tried again odin 3.09 to flash with various firmwares which results in zero.
Set is in white screen mode, upon pressing power+lower vol+home it enters in downloading mode. I flashed 4 files + PIT of jovilonas but to disappointment. One strange thing I experienced that during flashing it always struck at image.ext.4 and failed, but I selected the T Flash option then it completed successfully but after reboot it is same as if there was no flashing at all. Before bricked it was having KitKat 4.4.2 and upon Kies software update check it showed country KSA Product Code NHK7 (as i recall but not sure about Product Code accuracy but at last there was 7, but dead sure about KSA as Country).
Please help me with flashable firmware link and proper procedure. Grateful to you.
____________________________________
Memory 1: as i have come to realize that my G901F was not Stock Rom Flashed and then Reflash to Root that ROM. It was already a Rooted Firmware Mod. Cause simply rooted Stock ROM when executed as Factory Reset it removes Root (as some one told me during my quest to unbrick it). Now it is clear to me that before flashing with Stock ROM, i factory restored the set but there was nothing changed and the root was there. Only issue was that it asks for wifi password whenever it restarts rather than storing it once.
Memory 2: There was no KNOX counter while it was on KITKAT 4.4.2. Neither in the Device Info nor in the Downloading mode (power+vol down+home). It always shows, ODIN MODE
MODEL G901F
System Binary Samsung official
System Status Custom
Upgraded from Kitkat to Lollipop. Just. Need some help rooting.
So not being very experienced at Rooting/Flashing Roms this may come across strange.
Here is a little background to my problem.
I had a rooted Note 3 running KitKat before I decided to flash to Lolipop. I downloaded the Vodafone (UK) variant of the ROM from Sammobile not thinking anything of it at the time (As I am on Vodafone) I went through the usual procedure of going into download mode running Odin as admin and then connecting my phone, adding the Rom files to Odin and then Flashing. Flashing started fine as it got towards the end it Failed on Hidden(Something).
I panicked didn't know what to do so I unplugged my device and tried to reboot. It didn't. It said something along of the lines as there is a firmware error and got stuck on that screen. Panicked some more, decided I would try to google a fix. Came across one which required me to flash CWM Recovery onto my phone. I thought I would try it, Once it flashed which went fine I was told too try and boot straight into recovery mode once the phone starts and reboot through there. I took out my battery put it back in and then went ahead and tried to boot into recovery which worked. Once on CWM I went to reboot the phone As I hit yes too reboot It took me to another screen where it said I wasn't rooted and if I would like to reroot. I decided to click NO and restart the phone. It got stuck on a boot loop, I did a factory reset and cache wipe and it booted into life. (And working fine so far)
So here is where the problem is.
I am looking to get root back to the device. I think I have a locked boot loader as I installed the Vodafone variant of the 5.0 Rom. Would I be able to Flash the BTU Rom onto my device without bricking it, and after that would I be able to root Via CFAutoRoot which seems to be the easiest way to so. Or could I flash with CFAutoRoot Straight onto this ROM.
Info:
BTU ROM:
Date Country/Carrier Version PDA CSC
2015-07-01 United Kingdom 5.0 N9005XXUGBOF1 N9005BTUGBOD2
ROM I INSTALLED:
Date Country/Carrier Version PDA CSC
2015-06-01 United Kingdom (Vodafone) 5.0 N9005XXUGBOD6 N9005VFGGBOD2
Thanks for any help in advance.
I recommend installing TWRP and flashing supersu.zip from TWRP.
Search "CF Auto Root Note 3 xda" in Google.
That's easy.
Btw i too will recommend using TWRP as recovery.
Sent from my SM-N9005 using Tapatalk
Problem Solved, Flashed to another 5.0 ROM and then rooted via the normal CF Method. Thanks for the replys.
Hi guys,I have SM-G900F ,i rooted my phone and installed TWRP,after some time i unrooted with SuperSu,now i cant update my phone and i want to flash Stock ROM so i could update it normally through OTA update.I saw in Phone info that my CSC code is SEE(South East Europe),so i downloaded that firmware and Odin but i need little bit more information.Im scared if i get in bootloop or brick my phone,any suggestions to do before flashing stock ROM?Thanks
w0ny said:
Hi guys,I have SM-G900F ,i rooted my phone and installed TWRP,after some time i unrooted with SuperSu,now i cant update my phone and i want to flash Stock ROM so i could update it normally through OTA update.I saw in Phone info that my CSC code is SEE(South East Europe),so i downloaded that firmware and Odin but i need little bit more information.Im scared if i get in bootloop or brick my phone,any suggestions to do before flashing stock ROM?Thanks
Click to expand...
Click to collapse
Put the phone into download mode
Connect to PC USB
Check ODIN has the COM port highlighted at the top
Add the stock ROM to AP in ODIN
When it is ready, press Start
When ODIN is finished flashing, it will reboot your phone into your new stock ROM
Stock ROM running on your phone after that will be able to take OTA updates (As long as you don't root / custom recovery)
If you want root and custom recovery again, just do the same as you did last time, and each time you want to update, just follow the above, that's how I update
hi
ive got a s8, which was rooted using magisk, but was having issue, so was advised to unroot, remote and try superSU instead.
in the process of flashing stock rom AND 8.0, the phone now boots up to black screen showing verification failed, only option to reset.
when i press reset, all it does is restarts, loads up TWRP which had been installed before,
TWRP runs some program and fails and then phone goes back to black screen showing verification failed.
ive booted it into download mode, in the hope that i can just start again by simply lashing fresh stock rom, but it connects to odin fine, but when i click start, it gives a red error every time.
so i cant access the standard recovery menu as ive got TWRP so that loads instead and it looks as that is corrupted and i cant flash new fresh rom from download as odin brings up issue
ive check another phone and there is no issue with odin or the usb-c cable,
there is an issue with the s8 and odin does not like something in the s8 so wont let me flash anything to it,
any advice would be greatly appreicated.
When you flashed the stock rom using odin did you flash a bootloader aswell as the rom or did you just flash the rom the problem might be that the bootloader was for pie and the rom is oreo or vice versa whenever I flash back to stock I fill all but one of the boxes in odin
i suspect it was all oreo, as i downloaded as a complete file but ill check and get back to you
thanks for advice.