FYI - it has been reported FireOS 5.3.2 is being distributed via OTA update (here). The same individual indicated Kingroot was ineffective suggesting this build is not rootable at present. Also unknown is whether a rollback to FireOS 5.3.1 is possible. Suggest not trying a rollback unless you are comfortable sacrificing the device. Those on a lower versions of FireOS should consider blocking OTA updates via SuperTool (here) if you wish to preserve the option to root.
Edit: see following post by @zippy411. Appears a rollback to FireOS 5.3.1 (rootable) is viable.
Davey126 said:
FYI - it has been reported FireOS 5.3.2 is being distributed via OTA update (here). The same individual indicated Kingroot was ineffective suggesting this build is not rootable at present. Also unknown is whether a rollback to FireOS 5.3.1 is possible. Suggest not trying a rollback unless you are comfortable sacrificing the device. Those on a lower versions of FireOS should consider blocking OTA updates via SuperTool (here) if you wish to preserve the option to root.
Click to expand...
Click to collapse
I decided to offer up my tablet for testing. One of the two kindle fires I was going to root updated itself to 5.3.2 as soon as it was turned on. I am going to attempt to restore it back to 5.3.1.0
I followed the instructions in this youtube video.
https://www.youtube.com/watch?v=RQLoH-ahjy4
I used this as my source for the firmware. I downloaded 5.3.1.0
http://forum.xda-developers.com/showpost.php?p=62986665&postcount=3
I had some trouble getting the kindle recognized in usb debug mode even after installing correct drivers and attempting to manually update the drivers the usual way but was successful using this method in Windows 7 Pro 64-bit.
Open device manager Settings>Devices>Device Manager
Connect Kindle Fire
Enable USB debugging
(If Kindle is not listed as Android>Android Composite ADB interface)
select Other Devices>Fire
Right Click>Update Driver Software
Browse my computer for Driver Software
Let me pick from a list of drivers on my computer
select show all devices
select Amazon.com
select Android or Android Phone (or ADB Interface or Android Device)
Select Android Composite ADB interface
or Android Composite ADB interface
It now states I am running FireOS 5.3.1.0
I am now going to root this device using the latest supertool and install the fire nexus rom.
I successfully rooted it and installed the fire nexus rom.
I found that Kingroot 4.9.6 151 works best instead of the kingroot included in supertool. run kingroot and then the supertool process like normal to replace kingroot with supersu.
I also had to install flashfire manually versus the one included in supertool.
good luck all!
great news that we can downgrade without issue.
P.S: Maybe my HD 10 5.3.1.0 will never see the light of getting root as Fire 7" as Amazon is pushing another update already
Did you try to rip the Alexa voice assistant APK(s) out and try them on other ROMs at all? I'd be very interested in being able to do this. Since my Fire was on 5.0.1 when I switched it to CM, I don't want to have to lose being able to use TWRP in order to get the files myself (via upgrade, root, and then stuck with flashfire).
Orbiting234 said:
Did you try to rip the Alexa voice assistant APK(s) out and try them on other ROMs at all? I'd be very interested in being able to do this. Since my Fire was on 5.0.1 when I switched it to CM, I don't want to have to lose being able to use TWRP in order to get the files myself (via upgrade, root, and then stuck with flashfire).
Click to expand...
Click to collapse
Quite likely you can retain 5.0.1 bootloader while 'upgrading' to FireOS 5.4.x (when released) using the time proven procedure in this thread yielding the best of both worlds. Backup your existing CM install in TWRP so you can revert back after grabbing the Alexa components. You could do the same with the FireOS build and toggle between the two (awkwardly) via TWRP backup/restore. Can do the same thing with recent FlashFire builds although I would always retain a true nandroid (ie: twrp backup) of CM as a fallback.
zippy411 said:
I decided to offer up my tablet for testing. One of the two kindle fires I was going to root updated itself to 5.3.2 as soon as it was turned on. I am going to attempt to restore it back to 5.3.1.0
I followed the instructions in this youtube video.
https://www.youtube.com/watch?v=RQLoH-ahjy4
I used this as my source for the firmware. I downloaded 5.3.1.0
http://forum.xda-developers.com/showpost.php?p=62986665&postcount=3
I had some trouble getting the kindle recognized in usb debug mode even after installing correct drivers and attempting to manually update the drivers the usual way but was successful using this method in Windows 7 Pro 64-bit.
Open device manager Settings>Devices>Device Manager
Connect Kindle Fire
Enable USB debugging
(If Kindle is not listed as Android>Android Composite ADB interface)
select Other Devices>Fire
Right Click>Update Driver Software
Browse my computer for Driver Software
Let me pick from a list of drivers on my computer
select show all devices
select Amazon.com
select Android or Android Phone (or ADB Interface or Android Device)
Select Android Composite ADB interface
or Android Composite ADB interface
It now states I am running FireOS 5.3.1.0
I am now going to root this device using the latest supertool and install the fire nexus rom.
I successfully rooted it and installed the fire nexus rom.
I found that Kingroot 4.9.6 151 works best instead of the kingroot included in supertool. run kingroot and then the supertool process like normal to replace kingroot with supersu.
I also had to install flashfire manually versus the one included in supertool.
good luck all!
Click to expand...
Click to collapse
I just followed your lead and it worked!!!
I had 5.3.2.0 on my Kindle Fire 7" Gen 5 tablet.
I booted the tablet into recovery (adb reboot recovery) and then used the "adb sideload" command to flash the 5.3.1.0 firmware.
The latest Kingroot did not work, so I downloaded the version you suggested 4.9.6 (from http://www.apkmirror.com/apk/kingro...-release/kingroot-4-9-6-android-apk-download/)
That version did successfully root the device!
Now I'm playing with FlashFire. If all goes well, I'll be running CM12.1 soon!
Update: CM12.1 is installed and running great!
ManWithCamera said:
I just followed your lead and it worked!!!
I had 5.3.2.0 on my Kindle Fire 7" Gen 5 tablet.
I booted the tablet into recovery (adb reboot recovery) and then used the "adb sideload" command to flash the 5.3.1.0 firmware.
The latest Kingroot did not work, so I downloaded the version you suggested 4.9.6 (from http://www.apkmirror.com/apk/kingro...-release/kingroot-4-9-6-android-apk-download/)
That version did successfully root the device!
Now I'm playing with FlashFire. If all goes well, I'll be running CM12.1 soon!
Update: CM12.1 is installed and running great!
Click to expand...
Click to collapse
Will it be possible on 6th gen as well?
I can't quite understand the difference between the two software-wise.
Apart of the NEW Alexa, does anyone here has noticed something NEW or any improvements with the latest FireOS 5.3.2 update?
Can we root it after the update with dirty cow?
just4u32 said:
Will it be possible on 6th gen as well?
I can't quite understand the difference between the two software-wise.
Click to expand...
Click to collapse
Hi - this forum is for 5th gen Fire (released fall 2015); you'll want to ask you question here. While 5th and 6th gen devices often run similar builds of FireOS there are some differences attributable to hardware variations and software release cycles. What works on one type of device may or may not on others. Rollbacks can be especially dangerous as bootloaders/kernels generally differ across device types. A failed rollback attempt typically yields a bricked device with no recovery options. In short, I would not generalize across device types.
Reuben Talbott said:
Can we root it after the update with dirty cow?
Click to expand...
Click to collapse
To my knowledge there is no indication Dirty Cow has any meaningful relevance on this device. Although the underlying vulnerability may exist there is no evidence it has been successfully exploited on FireOS.
OK I thanks
Reuben Talbott said:
Can we root it after the update with dirty cow?
Click to expand...
Click to collapse
I tried rooting it with Dirty Cow after the update to 5.3.2.0, but was unsuccessful. The device would reboot while it was attempting the exploit. Flashing back to 5.3.1.0 made it rootable again (via Kingroot version 4.9.6).
5.3.2 > 5.3.1 downgrade IS possible
Good Afternoon,
I recent purchased a Kindle Fire 7 (11/11/16) and it was upgraded to 5.3.2. I was able to downgrade the OS to 5.3.1 using the ADB sideload method and then root using Kingroot (11/18/16). Be sure to block OTA updates once completed. Have not seen any issues yet and will report if i do.
Good Luck everyone.
ManWithCamera said:
I tried rooting it with Dirty Cow after the update to 5.3.2.0, but was unsuccessful. The device would reboot while it was attempting the exploit. Flashing back to 5.3.1.0 made it rootable again (via Kingroot version 4.9.6).
Click to expand...
Click to collapse
Thanks
Tried to disable lockscreen ads using adb (com.amazon.kindle.kso), but when I touch the special offers icon on lockscreen, I get a window that says Selected Offers. Is there another package that I should be disabling? I'm on Fire OS 5.3.2.
Hello, i have the latest Fire 7".
If i rollback from 5.3.2 to 5.3.1.0 and i use Kingroot, only root, can I go to back to stock software if I have to give it to Amazon assistance?
Onlye root, not recovery modded or other rom.
Thanks
p.s.: not use slang with me, thanks
Palux said:
Hello, i have the latest Fire 7".
If i rollback from 5.3.2 to 5.3.1.0 and i use Kingroot, only root, can I go to back to stock software if I have to give it to Amazon assistance?
Click to expand...
Click to collapse
Yes - 5.3.1 can be reloaded again if pure stock is desired. However, this is not generally required for warranty exchanges (the only type of hardware assistance Amazon provides) as they do not perform a detailed inspection of returned devices.
Hey there, I followed the instructions as provided and everything seemed to work fine but now I am stuck and not sure if I should reboot it.
1. Downgraded from 5.3.2 to 5.3.1 -> worked
2. Install Kingroot with "AmazonFire5thGenSuperTool" and Root the device -> worked
3. Install FlashFire with "AmazonFire5thGenSuperTool"-> that did not work. I got the message that the APK is invalid.
4. Install Google Play Store
5. Install FlashFire from Google Play Store -> was that ok?!
6. Configure it as described in this thread which was linked. CM12 + Gapps Nano
I was confused because the instructions are a little bit different regarding the checkboxes compared to the other thread but I followed those instructions.
Device rebooted, and now I am seeing an Amazon Logo on the Screen since about 1,5h. It does not reboot or anything, it just shows the Amazon Logo
Should I reboot it or is it actually flashing right now since hours?
br
Arret said:
Hey there, I followed the instructions as provided and everything seemed to work fine but now I am stuck and not sure if I should reboot it.
1. Downgraded from 5.3.2 to 5.3.1 -> worked
2. Install Kingroot with "AmazonFire5thGenSuperTool" and Root the device -> worked
3. Install FlashFire with "AmazonFire5thGenSuperTool"-> that did not work. I got the message that the APK is invalid.
4. Install Google Play Store
5. Install FlashFire from Google Play Store -> was that ok?!
6. Configure it as described in this thread which was linked. CM12 + Gapps Nano
I was confused because the instructions are a little bit different regarding the checkboxes compared to the other thread but I followed those instructions.
Device rebooted, and now I am seeing an Amazon Logo on the Screen since about 1,5h. It does not reboot or anything, it just shows the Amazon Logo
Should I reboot it or is it actually flashing right now since hours?
Click to expand...
Click to collapse
Something went wrong; the Amazon Logo should display for <30 sec. You will need to reload FireOS 5.3.1 from the stock recovery menu and start over. Guidance here, here. Once recovered post back for further assistance loading CM 12.1.
Related
Downloadable Fire HD 6/7 2014 ROMs:
Lollipop 5.1 based
5.6.3.2 (latest, upgrade to it via TWRP)
https://fireos-tablet-src.s3.amazon...ss3/update-kindle-20.6.0.5_user_605485620.bin
5.6.0.1
https://kindle-fire-updates.s3.amaz...aC8/update-kindle-20.5.9.5_user_595550320.bin
5.6.0.0
https://fireos-tablet-src.s3.amazon...nab/update-kindle-20.5.9.5_user_595457320.bin
5.4.0.1
https://fireos-tablet-src.s3.amazon...Maw/update-kindle-20.5.7.9_user_579279320.bin
5.4.0.0
https://fireos-tablet-src.s3.amazon...ekw/update-kindle-20.5.7.9_user_579225620.bin
5.3.3.0
https://fireos-tablet-src.s3.amazon...7Ca/update-kindle-20.5.7.0_user_570208620.bin
5.3.1.1
https://fireos-tablet-src.s3.amazon...woE/update-kindle-20.5.5.4_user_554207020.bin
5.3.1
http://kindle-fire-updates.s3.amazo...t9p/update-kindle-20.5.5.2_user_552153420.bin
5.1.2.1
http://kindle-fire-updates.s3.amazo...Wt5/update-kindle-20.5.4.2_user_542169020.bin
5.1.2
http://kindle-fire-updates.s3.amazo...HBV/update-kindle-20.5.4.2_user_542168620.bin
5.1.1
http://kindle-fire-updates.s3.amazo...aZE/update-kindle-20.5.4.1_user_541113320.bin
5.0.1 (last 5.0.1 ?)
http://amzdigitaldownloads.edgesuit...kindle-full_ariel-20.5.2.2_user_522055720.bin
5.0.1 , Sept 2015, update-kindle-full_ariel-20.5.2.2_user_522053520.bin
https://mega.nz/#!ZI1wTL6L!xbDNDvaJjLUWwqe8J9awAs4xNQvxreXCmZ1I6cWTLVA
5.0.1
http://rootjunkysdl.com/files/Amazo...-devpreview_ariel-20.5.2.2_user_522041550.bin
5.0.0 - the original preview, could be Lollipop 5.0 based
https://www.dropbox.com/s/38i2lqq5p...review_ariel-20.5.2.0_user_520033250.bin?dl=0
KitKat based
4.5.1 (can root directly by Kingroot)
https://kindle-fire-updates.s3.amazonaws.com/update-kindle-20.4.5.1_user_451004420.bin
4.5.2 (can root directly by Kingroot)
https://kindle-fire-updates.s3.amazonaws.com/update-kindle-20.4.5.2_user_452004220.bin
4.5.3 (can root directly by Kingroot) - best version to root
https://kindle-fire-updates.s3.amazonaws.com/update-kindle-20.4.5.3_user_453011120.bin
4.5.4 v1 (no root directly, but can upgrade to this and keep root)
http://kindle-fire-updates.s3.amazonaws.com/update-kindle-20.4.5.4_user_454006020.bin
4.5.4 v2 (no root directly, but can upgrade to this and keep root)
https://kindle-fire-updates.s3.amazonaws.com/update-kindle-20.4.5.4_user_454006120.bin
4.5.5 (no root directly, but can upgrade to this and keep root)
http://kindle-fire-updates.s3.amazo...13N/update-kindle-20.4.5.5_user_455001420.bin
4.5.5 v2 (no root directly, but can upgrade to this and keep root)
http://kindle-fire-updates.s3.amazo...2bo/update-kindle-20.4.5.5_user_455001820.bin
4.5.5.1 (no root directly, but can upgrade to this and keep root. Warning!!! 4.5.5.1 bootloaders will brick the device if one requests FireOS 5 after running 4.5.5.1 unrooted, however, can run this ROM with 4.5.3 bootloaders without issues)
http://kindle-fire-updates.s3.amazo...UUc/update-kindle-20.4.5.5_user_455002120.bin
For 4.5.5.1, follow the respective safe upgrade procedures via TWRP :
http://forum.xda-developers.com/fire-hd/general/upgrade-to-4-5-5-root-t3174449
bibikalka said:
Downloadable ROMs for reference :
. . .
4.5.5 (no root directly, but can upgrade to this and keep root)
http://kindle-fire-updates.s3.amazo...13N/update-kindle-20.4.5.5_user_455001420.bin
Click to expand...
Click to collapse
We don't have updater-script and modified bin for 4.5.5. I see 4.5.4 and 4.5.5 updater-scripts are identical, so presume we can use your edited 4.5.4 script and create 4.5.5 update.zip per instructions for 4.5.4: http://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-4-5-4-twrp-root-t3141648
If this is correct I can create a 4.5.5 update zip and post if you don't have time. Let me know. Thanks!
EDIT: or maybe you want to change upgrade-to-4.5.4 to upgrade-to-4.5.5?
DoLooper said:
We don't have updater-script and modified bin for 4.5.5. I see 4.5.4 and 4.5.5 updater-scripts are identical, so presume we can use your edited 4.5.4 script and create 4.5.5 update.zip per instructions for 4.5.4: http://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-4-5-4-twrp-root-t3141648
If this is correct I can create a 4.5.5 update zip and post if you don't have time. Let me know. Thanks!
EDIT: or maybe you want to change upgrade-to-4.5.4 to upgrade-to-4.5.5?
Click to expand...
Click to collapse
Ha-ha, very true! Now that I've tried 4.5.5, I've posted a simpler set of instructions where there is no need to mess with the update file at all (and the tweaks can be done post upgrade):
http://forum.xda-developers.com/fire-hd/general/upgrade-to-4-5-5-root-t3174449
xd
Trouble after upgrade to 5.3.1.1
After upgrade to 5.3.1.1 I lost TWRP/GApps/Root. From what I can see, it wiped and did fresh install. I was able to get root back. I have installed TWRP manager which shows I still have TWRP still installed but I am unable to access it. any help or answers would be appreciated.
* I had 4.5.3 bootloader and was previously running 4.5.5.1
thanks for these. after holding on for what seems like ages for a fully working cm machine I've given up and gone back to fireOS & handed my hd6 to the girlfriend who's a keen paperwhite reader & her hp slate stopped playing fair with bbc iplayer & that's about all she's after - books & stuff that works in fireOS natively. so no desire for a nearly working device. I've had fun flashing, bricking & re-flashing but time moves on.
i'm grateful to have returned this often busted machine back to stock. god bless xda & all those who sail in her!
@bibikalka Can the latest Fire OS (which is version 5.6.0.1 not 5.6.3.2 like mentioned in thread) be updated with twrp and rooted?
[email protected] said:
@bibikalka Can the latest Fire OS (which is version 5.6.0.1 not 5.6.3.2 like mentioned in thread) be updated with twrp and rooted?
Click to expand...
Click to collapse
I downloaded it, changed the extension from .bin to .zip, flashed it, and then flashed SU to retain root. Restarted, took a long while, but it booted up with root just fine.
Here's the situation:
I have a Lenovo A8-50F table. After attempting to flash a new TWRP recovery rom on it after unlocking the bootloader, I ended up with a tablet that would constantly reboot. I am attempting to fix this issue with the SP Flash Tool but I have two issues:
I don't know if the MT file is the right file for this.
You are supposed to see a red bar pass when you hit download indicating it has finished the upload and it never comes.
I have done the volume up + voume down + down and all the other combinations and at most what it produces is a 2005 error.
I have the a58p rom in zip file that I downloaded from here.
I'd like to have some help, but I'm not sure what I'm supposed to be searching for.
chicago4545 said:
Here's the situation:
I have a Lenovo A8-50F table. After attempting to flash a new TWRP recovery rom on it after unlocking the bootloader, I ended up with a tablet that would constantly reboot. I am attempting to fix this issue with the SP Flash Tool but I have two issues:
I don't know if the MT file is the right file for this.
You are supposed to see a red bar pass when you hit download indicating it has finished the upload and it never comes.
I have done the volume up + voume down + down and all the other combinations and at most what it produces is a 2005 error.
I have the a58p rom in zip file that I downloaded from here.
I'd like to have some help, but I'm not sure what I'm supposed to be searching for.
Click to expand...
Click to collapse
i also have the same problem now and have been searching for about a week now and experimenting it seems there are no tools which are compatible with our tab.. which version of sp flash tool are you using? and could you send me a link to that a58p rom
chicago4545 said:
Here's the situation:
I have a Lenovo A8-50F table. After attempting to flash a new TWRP recovery rom on it after unlocking the bootloader, I ended up with a tablet that would constantly reboot. I am attempting to fix this issue with the SP Flash Tool but I have two issues:
I don't know if the MT file is the right file for this.
You are supposed to see a red bar pass when you hit download indicating it has finished the upload and it never comes.
I have done the volume up + voume down + down and all the other combinations and at most what it produces is a 2005 error.
I have the a58p rom in zip file that I downloaded from here.
I'd like to have some help, but I'm not sure what I'm supposed to be searching for.
Click to expand...
Click to collapse
Hi, I know to recovery you Lenovo A8-50F. It's yet actually?
Thanks.
I used KingRoot (ver 4.8.2) to root my Lenovo Tab2 A8-50F Tablet.
I used KingRoot as part of a SuperTool. The SuperTool, using a batchfile script, also removed KingRoot after the tablet was rooted and then installed SuperSU.
The SuperTool (April 6, 2016 version) was created by xda's RootJunky for the Amazon Fire 7 5th gen tablet, using KingRoot and SuperSU, but it rooted my Lenovo Tab2 A8-50F Tablet, uninstalled KingRoot and installed SuperSU, all with only a couple of mouse clicks.
Even if you are already rooted with KingRoot, you can use this tool to uninstall KingRoot and install SuperSU. (Just run the tool, let it re-install KingRoot, don't run KingRoot but hit Enter on the SuperTool to then uninstall KingRoot and install SuperSU).
Lenovo Tab2 A8-50F Tablet info:
Model Number: Lenovo TAB 2 A8-50F
Android version: 5.1
Kernel version: 3.10.65
Build number: A8-50F_S000037_151023_ROW
Software version: A8-50F_151023
Hardware version; LenovoPad A8-50F
The SuperTool batch file script rooted the tablet with KingRoot and then uninstalled KingRoot and installed SuperSu.
I have since installed ES File Manager, Titanium Backup, Link2sd on the tablet. Root is totally working. Rooted with only a couple of clicks!
Just enable Developer options on Lenovo Tab2 A8-50F (by tapping tablet Build Number 7 to 10 times [Settings, About Tablet, Build Number (tap 7 to 10 times)]), enable USB debugging on Tablet in the Developer options settings.
Connect Tablet to Windows 10 with a USB data cable (I used the USB 2.0 port). When screen message on the Tablet mentions connections, make sure it is in the MTP mode.
Extract RootJunky's SuperTool Zip file to the Windows 10 desktop.
Run RootJunky's SuperTool (Amazon-Fire-5th-gen.bat) You may have to read the instructions on the pages below and install adb drivers. Pick option #6 Root. Choose Option #3: version 5.1.2. This will run a script that installs KingRoot, allows you to run it manually, and then removes KingRoot and installs SuperSU.
Press enter and KingRoot will be installed on the Tablet from the SuperTool. (approve any messages that appear on Tablet screen) Now don't touch the PC SuperTool until the Tablet is rooted.
Open KingRoot on the Tablet and run it. You may have to run KingRoot several times and the Tablet may reboot. Just keep running KingRoot until the Tablet is rooted. After KingRoot reaches 100%, then press ENTER on the PC.
The SuperTool will now uninstall KingRoot and install SuperSU on the Tablet.
Choose NORMAL SuperSU install on the Tablet when prompted. When SuperSU is installed, reboot the Tablet. Disconnect data cable.
After reboot the Lenovo Tab2 A8-50F Tablet is rooted. There will be a request by SuperSU to upgrade. Approve it. You can now install Titanium Backup, Link2sd, ES File Manager, etc. Your Tablet is rooted. As easy as that. THANKS ROOTJUNKY!!!
Info and links to Download RootJunky's SuperTool at these pages:
Amazon Fire 5th Gen [SuperTool] Root, Google play install, block ota updates and more
http://forum.xda-developers.com/amazon-fire/development/amazon-fire-5th-gen-supertool-root-t3272695
"AmazonFire5thGenSuperTool.zip"
http://rootjunkysdl.com/files/?dir=Amazon Fire 5th gen/SuperTool
[EDIT Oct. 25] Here's what I did--cleaned up and corrected for bootloaders--to install the official 5.2.2 update (build date September, 2015) on myrooted tablet running Developers Preview, build date July, 2015.This is only for those who rooted and installed the dev preview before the upgrade/downgrade troubles. It let's you keep all your stuff.
Few important things:
If you don't reset/wipe in TWRP you can keep most of your stuff, including homescreen layout, play store and all apps. However . . .
Google framework, account manager, contact sync and calendar sync get deleted with the update.
I didn't flash Gapps and got bogus insufficient space error [130 Mb free] when I tried later. Restoring framework fixed everything, but it may be best to flash new Gapps (although that can cause problems when update doesn't completely wipe /system, like this one). Up to you.
Oct 26 Update: Based on reported "insufficient space" flashing Gapps--plus testing and researching contacts and calendar--I suggest not flashing Gapps but simply backing up Google services framework before you upgrade and restoring it after. The other google system apps that get deleted don't seem to be needed; if you want to sync Google contacts & calendar on the Fire you can add your google account(s) in Settings, same as on any Android. If you don't want Amazon's stock calendar or contacts, get another from the Play Store. I've updated the instructions to reflect this.
.
HDXposed module is no longer needed for working Play Store.
Xposed Framework: The update doesn't support the version we used with the July dev preview. You must either flash the latest version or flash the uninstaller if you don't want Xposed anymore.
Stock launcher now = com.amazon.firelauncher
Home key now defaults to stock launcher until you pm disable it. (No prompt anymore)
Backup Google Services Framework.
Turn off wifi (airplane mode) and plug in.
Download the zips:
* September 5.2.2 update (thanks @Hariiiii !) and rename extension from bin to zip.
update-kindle-full_ariel-20.5.2.2_user_522053520.bin: https://mega.nz/#!ZI1wTL6L!xbDNDvaJjLUWwqe8J9awAs4xNQvxreXCmZ1I6cWTLVA
* Latest Xposed Installer or Uninstaller from here: http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979
Installer = Xposed-v74-sdk22-arm-by-romracer-20150911.zip
Uninstaller = xposed-uninstaller-20150911-arm64.zip
* Gapps (if using)
tk_gapps-modular-pico-5.1.1-20150920-signed.zip: http://forum.xda-developers.com/android/software/tk-gapps-t3116347
* 5.2.0_stock_recovery_only.zip
Attached to bibikalka's lollipop post: http://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-lollipop-root-gapps-t3163950
Get latest SuperSU apk (?) Don't know if it's required, but I installed it.
- SuperSU 2.52 Beta: http://www.apkmirror.com/apk/chainfire/supersu/supersu-2-52-android-apk-download/
Follow Step 1 of @bibikalka's guide to temporarily install TWRP and while in TWRP:
a. Flash the update
b. Flash Xposed (installer or uninstaller)
c. Flash 5.2.0_stock_recovery_only.zip
d. Choose boot to recovery and install SuperSU when TWRP prompts you.
Confirm you're in recovery, then boot to system and press Exit at "Welcome to Fire OS 5!"
In OS, see if SuperSU is still managing root access. If it's not or you want to update, install the new SuperSU apk and update binaries.
(Wait to reboot unless you can't get su access at next step.)
Block OTA:
a. Disable dcp or otaverifier (whichever you prefer)
b. Rename system/priv-app/devicesoftwareota/devicesoftwareota.apk extension to apk_
Restore Google Services Framework and reboot.
Turn on wifi and sign in to playstore.
Thanks for the guide!
deleted
putridfoetus said:
Will this work if my tablet is running the september 5.2.2 and never rooted? Just downgrade to 4.5.3 and go from there?
Or can I just install twrp to flash xposed and get supersu, then reflash the stock recovery?
Click to expand...
Click to collapse
As far as I understand from my experience of going from unrooted september 5.2.2 to rooted 4.5.3 to rooted september 5.2.2, it should work fine if you go via that route.
putridfoetus said:
Will this work if my tablet is running the september 5.2.2 and never rooted? Just downgrade to 4.5.3 and go from there?
Or can I just install twrp to flash xposed and get supersu, then reflash the stock recovery?
Click to expand...
Click to collapse
This is only for rooted tablets. Follow the steps Hariiiii describes here. There are guides for what he did.
[How To] Upgrade Rooted Developers Preview to Official 5.2.2 Release
Finally i follow the turorial and i forgive flash 5.2.0 recovery and gapps and it works then i flash twrp again by adb and i did wipes and flash update, gapps, xposed and 5.2.0 recovery and i hard bricked my fire. Why?
I order a replacement. What i have to do to have fire os 5 final with root, play store and other launcher?
Thanks
You got bricked because you used a tutorial to root that said at the top, don't use/on hold. Maybe we'll have a new method when you get your replacement.
Could we possibly get a video tutorial on how to do this?
(May be easier for some.)
Ooh, I don't do video and doubt anyone will for this, but that would be kind. You can pm me with questions.
I'll see if I can do a video. However, can you add to the guide how to get to the rooted preview at the start of the guide. I bricked my kindle going from 5.0 or so to 4.5.3 up again to get here and bricked. Probably my bad but it would help if you provide some initial steps for those who just got their tablets. Btw my replacement comes in tomorrow do I'll see what I can do for the video if possible.
Nice guide!
I wonder if HDXposed is still needed to keep the PlayStore working. The clarity on installing GAPPS is kind of missing too
bibikalka said:
Nice guide!
I wonder if HDXposed is still needed to keep the PlayStore working. The clarity on installing GAPPS is kind of missing too
Click to expand...
Click to collapse
Hdxposed is not necessary
cm11noob10 said:
I'll see if I can do a video. However, can you add to the guide how to get to the rooted preview at the start of the guide. I bricked my kindle going from 5.0 or so to 4.5.3 up again to get here and bricked. Probably my bad but it would help if you provide some initial steps for those who just got their tablets. Btw my replacement comes in tomorrow do I'll see what I can do for the video if possible.
Click to expand...
Click to collapse
Think we have some confusion. I'll need to make this clearer: This guide is only for people who already have the rooted developer preview--people who did the downgrade/upgrade using the July build. There is no longer a way to use the developer preview to gain root; the latest version (September) ends up causing bricks, as you learned the hard way. Fortunately, it looks like the official 5.2.2 update that Amazon is now OTA distributing can be successfully used in the downgrade/upgrade operation. I'm sure guides for that will be out soon.
Then I'll look for a guide on that and go from there.
Thx for the replies.
bibikalka said:
I wonder if HDXposed is still needed to keep the PlayStore working. The clarity on installing GAPPS is kind of missing too
Click to expand...
Click to collapse
Good feedback, thanks. HDXposed is indeed not needed, which of course means Xposed isn't required. If you don't install the new Xposed, though, I suspect the old, non-working one will stay on system even with factory reset. Your thoughts?
(Edit: NVM. Yes, they'll still have old Xposed, so will need new.)
Yeah, Gapps <sigh> It's such a personal thing. (Thinking about how to handle.)
DoLooper said:
You got bricked because you used a tutorial to root that said at the top, don't use/on hold. Maybe we'll have a new method when you get your replacement.
Click to expand...
Click to collapse
But my first time i update and i didn't flash 5.2.0 recovery and work perfectly and i haved root. This mean that it isn't necessary flash 5.2.0 recovery?
Enviado desde mi SM-N910F mediante Tapatalk
davigar said:
Finally i follow the turorial and i forgive flash 5.2.0 recovery and gapps and it works then i flash twrp again by adb and i did wipes and flash update, gapps, xposed and 5.2.0 recovery and i hard bricked my fire. Why?
Click to expand...
Click to collapse
I'm looking into this again. When you flashed "5.2.0 recovery" which zip did you use, 5.2.0_stock_recovery_only.zip or 5.2.0_stock_recovery_uboot.zip? Thanks.
I flashed 5.2.0_stock_recovery_uboot.zip
davigar, you got the developer preview in order to downgrade to OS 4.5.3 and root, is that right? If not, what OS were you on and how did you install it?
EDIT: @davigar Wait a minute--did you not root? Did you just use this tutorial to install the update and that's when you forgot recovery? This will make a difference. Thanks.
I upgrade my kindle to developer preview then i downgrade to 4.5.3, root and upgrade it to 5.2.2 developer with gapps. I followed the newbie friendly tutorial when i bought it. Sorry for my english [emoji16]
Enviado desde mi SM-N910F mediante Tapatalk
Hi,
I followed the instructions on how to root the device via kingroot, su, flashfire CM for it etc.
Everything worked but flashfire and the custom rom which didn't do anything (black screen)
I gave up, however after few hours the device started to loop in "optimizing storage and application" mode () and hard-reset would not help.
I manage to unbrick it using "adb sideload" with latest fire os for hd 8 from Amazon.
Now when I am trying to repeat the process I cannot seem to root the device (KingRoot fails).
Any suggestion?
I really want to get rid of this terrible fireOs.
Thanks,
Hanan.
the fire utility is only for the 7in 2015 Fire
latest system versions 5.1.2.1 or 5.1.3 cannot be rooted, but can be downgraded to 5.1.2 which can be rooted see index
Index Amazon Fire HD 8 and HD 10
http://forum.xda-developers.com/hd8-hd10/general/index-amazon-fire-hd-8-hd-10-5th-gen-t3214218
Sent from my XT1060 using XDA Labs
I have already unlocked my 8hd (karnak) 2018 and flashed TWRP. It is now running Lineage OS 14.1.
I have 2 queries:
1. How can I re-install FireOS but keeping the device unlocked with TWRP recovery mode?
2. Where to download an older version FireOS which is rootable by mtk-su? (I want to remove some Amazon stuff as a Root user)
drdtyc said:
I have already unlocked my 8hd (karnak) 2018 and flashed TWRP. It is now running Lineage OS 14.1.
I have 2 queries:
1. How can I re-install FireOS but keeping the device unlocked with TWRP recovery mode?
2. Where to download an older version FireOS which is rootable by mtk-su? (I want to remove some Amazon stuff as a Root user)
Click to expand...
Click to collapse
As long as you have the latest version of TWRP for Karnak (3.3.1-0) you should just be able to flash the standard Amazon software 'update' (change '.bin' extension to '.zip'). You may have to wipe system and data first if changing OS. Don't wipe 'internal storage' if you want to keep your files (pictures, downloads etc.). One time I flashed a standard Amazon software package my recovery was overwritten, but if you have an mtk-su vulnerable version it is easy to redo the unlock with no opening of the tablet required.
The last build of OS 6.3.0.1 (mtk-su vulnerable) can be downloaded by clicking on this link: https://fireos-tablet-src.s3.amazonaws.com/qGCnGoVclGgaVdoLm9521w9byK/update-kindle-NS6301_user_1638_0001309042308.bin.
MontysEvilTwin said:
As long as you have the latest version of TWRP for Karnak (3.3.1-0) you should just be able to flash the standard Amazon software 'update' (change '.bin' extension to '.zip'). You may have to wipe system and data first if changing OS. Don't wipe 'internal storage' if you want to keep your files (pictures, downloads etc.). One time I flashed a standard Amazon software package my recovery was overwritten, but if you have an mtk-su vulnerable version it is easy to redo the unlock with no opening of the tablet required.
The last build of OS 6.3.0.1 (mtk-su vulnerable) can be downloaded by clicking on this link: https://fireos-tablet-src.s3.amazonaws.com/qGCnGoVclGgaVdoLm9521w9byK/update-kindle-NS6301_user_1638_0001309042308.bin.
Click to expand...
Click to collapse
Thank you very much.
May I also ask where to download an older version of FireOS (with mtk-su vulnerability) for Fire 7 (Austin) 2017 which is also unlocked with TWRP recovery mode?
drdtyc said:
Thank you very much.
May I also ask where to download an older version of FireOS (with mtk-su vulnerability) for Fire 7 (Austin) 2017 which is also unlocked with TWRP recovery mode?
Click to expand...
Click to collapse
The Fire 7 (7th generation, Austin) is not vulnerable to mtk-su. The shorting method is the only way to unlock this model.
MontysEvilTwin said:
The Fire 7 (7th generation, Austin) is not vulnerable to mtk-su. The shorting method is the only way to unlock this model.
Click to expand...
Click to collapse
I have already unlocked my Fire 7 Austin using the shorting method and flashed the Fire-Nexus rom on it. Very happy with the slick response under Fire-Nexus. I can use Open Camera apk which works fine using the back camera. The only slack is that the front camera for taking selfies does not work. Thus I am tempted to revert to FireOS and trim down the Amazon stuff as a Root user with the help of mtk-su.
drdtyc said:
I have already unlocked my Fire 7 Austin using the shorting method and flashed the Fire-Nexus rom on it. Very happy with the slick response under Fire-Nexus. I can use Open Camera apk which works fine using the back camera. The only slack is that the front camera for taking selfies does not work. Thus I am tempted to revert to FireOS and trim down the Amazon stuff as a Root user with the help of mtk-su.
Click to expand...
Click to collapse
MTK-SU is a temp root and doesnt allow for system changes. You would be better off flashing magisk for root usage. You can download the latest from amazon flash it, and flash magisk.
drdtyc said:
I have already unlocked my Fire 7 Austin using the shorting method and flashed the Fire-Nexus rom on it. Very happy with the slick response under Fire-Nexus. I can use Open Camera apk which works fine using the back camera. The only slack is that the front camera for taking selfies does not work. Thus I am tempted to revert to FireOS and trim down the Amazon stuff as a Root user with the help of mtk-su.
Click to expand...
Click to collapse
Best of luck finding a version of Fire OS for Austin that is vulnerable to mtk-su.
If you don't want root access permanently on this tablet you could install SuperSU or Magisk, remove whatever Amazon bloat you want and then unroot. Your only other option is to manually rename or delete any unwanted system apps using the TWRP file manager while in recovery mode.