Database Users

Root Method for Nexus Player that ACTUALLY Works?

Hello,
So I have been trying to root my Nexus Player with absolutely no luck at all!
I am following this method to a T!!!!
http://cord-cutters.wonderhowto.com/how-to/root-nexus-player-0160218/
Long story short, everything goes great and the Nexus Player re-boots. I go into the SuperSU App and the Installation Fails. Then, when I reboot, I get stuck in the boot animation. Only way out is to restart Nexus Player holding the button on the bottom, and re-running the "fastboot boot root.img" again. But, the same thing just happens over and over and over. "Installation Failed". This is pretty much my first time rooting an android device and it is being a serious pain in my ass! I did root my LG G Pad F7.0 and that was a cake walk. I thought Nexus Devices were "THE BEST" and "easiest" devices to root, blah blah blah. Well, not for me!
Can someone guide me to a root method that actually works? That would be greatly appreciated. Thank You!
Info:
Nexus Player
Version 5.1.1
Build LMY48N
I really want to install CM12.1! I bought a Logitech K400 Keyboard so I can use the Trebuchet Launcher properly.

That method works just fine..
When running the SuperSu app, DON'T update the binaries, that's why you're getting the bootloop
Flash the stock image and root again. Make sure to never update the binaries in SuperSu and you'll be fine

The root files provided by @mskip at http://forum.xda-developers.com/nexus-player/general/5-1-1-update-t3088961/page6 work on Android 5.1.1 even with the latest build number which you have.

Awesome! Thank you for the input. The guide I followed told me to update the binaries, so no wonder I was having problems. I will do as you said. Flash stock, root again, and leave it at that.

Can we update the binaries if we use the 2.49 beta of SuperSU?
Sent from my A0001 using Tapatalk

I got the same build as yours.
I had the same issues trying to root. And after hours and different tries this sequence worked for me.
1. Bootloader unlock
2. Load up NP, download ES Explorer and get CF 2.49 beta root zip and TWRP 2.8.7.0 boot img into /sdcard.
3. Bring NP into bootloader and fastboot flash recovery.
4. Insert usb keyboard/mouse and use the button on the bottom of NP and boot into TWRP recovery.
5. Install CF root. Reboot.
6. Check your apps. if you dont have super su, download it. When I open #SU, i didnt need to install it. In SU settings, the root is already check marked.
7. I installed MarketHelper and SU popped up, so I guess it works.

Im totally new to this and im trying to Root my nexus player.
I will follow this guide, but can somebody please explain how to to do this "Flash the stock image and root again" ?

FireOS 5.3.2 has arrived

FYI - it has been reported FireOS 5.3.2 is being distributed via OTA update (here). The same individual indicated Kingroot was ineffective suggesting this build is not rootable at present. Also unknown is whether a rollback to FireOS 5.3.1 is possible. Suggest not trying a rollback unless you are comfortable sacrificing the device. Those on a lower versions of FireOS should consider blocking OTA updates via SuperTool (here) if you wish to preserve the option to root.
Edit: see following post by @zippy411. Appears a rollback to FireOS 5.3.1 (rootable) is viable.

Davey126 said:
FYI - it has been reported FireOS 5.3.2 is being distributed via OTA update (here). The same individual indicated Kingroot was ineffective suggesting this build is not rootable at present. Also unknown is whether a rollback to FireOS 5.3.1 is possible. Suggest not trying a rollback unless you are comfortable sacrificing the device. Those on a lower versions of FireOS should consider blocking OTA updates via SuperTool (here) if you wish to preserve the option to root.
Click to expand...
Click to collapse
I decided to offer up my tablet for testing. One of the two kindle fires I was going to root updated itself to 5.3.2 as soon as it was turned on. I am going to attempt to restore it back to 5.3.1.0
I followed the instructions in this youtube video.
https://www.youtube.com/watch?v=RQLoH-ahjy4
I used this as my source for the firmware. I downloaded 5.3.1.0
http://forum.xda-developers.com/showpost.php?p=62986665&postcount=3
I had some trouble getting the kindle recognized in usb debug mode even after installing correct drivers and attempting to manually update the drivers the usual way but was successful using this method in Windows 7 Pro 64-bit.
Open device manager Settings>Devices>Device Manager
Connect Kindle Fire
Enable USB debugging
(If Kindle is not listed as Android>Android Composite ADB interface)
select Other Devices>Fire
Right Click>Update Driver Software
Browse my computer for Driver Software
Let me pick from a list of drivers on my computer
select show all devices
select Amazon.com
select Android or Android Phone (or ADB Interface or Android Device)
Select Android Composite ADB interface
or Android Composite ADB interface
It now states I am running FireOS 5.3.1.0
I am now going to root this device using the latest supertool and install the fire nexus rom.
I successfully rooted it and installed the fire nexus rom.
I found that Kingroot 4.9.6 151 works best instead of the kingroot included in supertool. run kingroot and then the supertool process like normal to replace kingroot with supersu.
I also had to install flashfire manually versus the one included in supertool.
good luck all!

great news that we can downgrade without issue.
P.S: Maybe my HD 10 5.3.1.0 will never see the light of getting root as Fire 7" as Amazon is pushing another update already

Did you try to rip the Alexa voice assistant APK(s) out and try them on other ROMs at all? I'd be very interested in being able to do this. Since my Fire was on 5.0.1 when I switched it to CM, I don't want to have to lose being able to use TWRP in order to get the files myself (via upgrade, root, and then stuck with flashfire).

Orbiting234 said:
Did you try to rip the Alexa voice assistant APK(s) out and try them on other ROMs at all? I'd be very interested in being able to do this. Since my Fire was on 5.0.1 when I switched it to CM, I don't want to have to lose being able to use TWRP in order to get the files myself (via upgrade, root, and then stuck with flashfire).
Click to expand...
Click to collapse
Quite likely you can retain 5.0.1 bootloader while 'upgrading' to FireOS 5.4.x (when released) using the time proven procedure in this thread yielding the best of both worlds. Backup your existing CM install in TWRP so you can revert back after grabbing the Alexa components. You could do the same with the FireOS build and toggle between the two (awkwardly) via TWRP backup/restore. Can do the same thing with recent FlashFire builds although I would always retain a true nandroid (ie: twrp backup) of CM as a fallback.

zippy411 said:
I decided to offer up my tablet for testing. One of the two kindle fires I was going to root updated itself to 5.3.2 as soon as it was turned on. I am going to attempt to restore it back to 5.3.1.0
I followed the instructions in this youtube video.
https://www.youtube.com/watch?v=RQLoH-ahjy4
I used this as my source for the firmware. I downloaded 5.3.1.0
http://forum.xda-developers.com/showpost.php?p=62986665&postcount=3
I had some trouble getting the kindle recognized in usb debug mode even after installing correct drivers and attempting to manually update the drivers the usual way but was successful using this method in Windows 7 Pro 64-bit.
Open device manager Settings>Devices>Device Manager
Connect Kindle Fire
Enable USB debugging
(If Kindle is not listed as Android>Android Composite ADB interface)
select Other Devices>Fire
Right Click>Update Driver Software
Browse my computer for Driver Software
Let me pick from a list of drivers on my computer
select show all devices
select Amazon.com
select Android or Android Phone (or ADB Interface or Android Device)
Select Android Composite ADB interface
or Android Composite ADB interface
It now states I am running FireOS 5.3.1.0
I am now going to root this device using the latest supertool and install the fire nexus rom.
I successfully rooted it and installed the fire nexus rom.
I found that Kingroot 4.9.6 151 works best instead of the kingroot included in supertool. run kingroot and then the supertool process like normal to replace kingroot with supersu.
I also had to install flashfire manually versus the one included in supertool.
good luck all!
Click to expand...
Click to collapse
I just followed your lead and it worked!!!
I had 5.3.2.0 on my Kindle Fire 7" Gen 5 tablet.
I booted the tablet into recovery (adb reboot recovery) and then used the "adb sideload" command to flash the 5.3.1.0 firmware.
The latest Kingroot did not work, so I downloaded the version you suggested 4.9.6 (from http://www.apkmirror.com/apk/kingro...-release/kingroot-4-9-6-android-apk-download/)
That version did successfully root the device!
Now I'm playing with FlashFire. If all goes well, I'll be running CM12.1 soon!
Update: CM12.1 is installed and running great!

ManWithCamera said:
I just followed your lead and it worked!!!
I had 5.3.2.0 on my Kindle Fire 7" Gen 5 tablet.
I booted the tablet into recovery (adb reboot recovery) and then used the "adb sideload" command to flash the 5.3.1.0 firmware.
The latest Kingroot did not work, so I downloaded the version you suggested 4.9.6 (from http://www.apkmirror.com/apk/kingro...-release/kingroot-4-9-6-android-apk-download/)
That version did successfully root the device!
Now I'm playing with FlashFire. If all goes well, I'll be running CM12.1 soon!
Update: CM12.1 is installed and running great!
Click to expand...
Click to collapse
Will it be possible on 6th gen as well?
I can't quite understand the difference between the two software-wise.

Apart of the NEW Alexa, does anyone here has noticed something NEW or any improvements with the latest FireOS 5.3.2 update?

Can we root it after the update with dirty cow?

just4u32 said:
Will it be possible on 6th gen as well?
I can't quite understand the difference between the two software-wise.
Click to expand...
Click to collapse
Hi - this forum is for 5th gen Fire (released fall 2015); you'll want to ask you question here. While 5th and 6th gen devices often run similar builds of FireOS there are some differences attributable to hardware variations and software release cycles. What works on one type of device may or may not on others. Rollbacks can be especially dangerous as bootloaders/kernels generally differ across device types. A failed rollback attempt typically yields a bricked device with no recovery options. In short, I would not generalize across device types.

Reuben Talbott said:
Can we root it after the update with dirty cow?
Click to expand...
Click to collapse
To my knowledge there is no indication Dirty Cow has any meaningful relevance on this device. Although the underlying vulnerability may exist there is no evidence it has been successfully exploited on FireOS.

OK I thanks

Reuben Talbott said:
Can we root it after the update with dirty cow?
Click to expand...
Click to collapse
I tried rooting it with Dirty Cow after the update to 5.3.2.0, but was unsuccessful. The device would reboot while it was attempting the exploit. Flashing back to 5.3.1.0 made it rootable again (via Kingroot version 4.9.6).

5.3.2 > 5.3.1 downgrade IS possible
Good Afternoon,
I recent purchased a Kindle Fire 7 (11/11/16) and it was upgraded to 5.3.2. I was able to downgrade the OS to 5.3.1 using the ADB sideload method and then root using Kingroot (11/18/16). Be sure to block OTA updates once completed. Have not seen any issues yet and will report if i do.
Good Luck everyone.

ManWithCamera said:
I tried rooting it with Dirty Cow after the update to 5.3.2.0, but was unsuccessful. The device would reboot while it was attempting the exploit. Flashing back to 5.3.1.0 made it rootable again (via Kingroot version 4.9.6).
Click to expand...
Click to collapse
Thanks

Tried to disable lockscreen ads using adb (com.amazon.kindle.kso), but when I touch the special offers icon on lockscreen, I get a window that says Selected Offers. Is there another package that I should be disabling? I'm on Fire OS 5.3.2.

Hello, i have the latest Fire 7".
If i rollback from 5.3.2 to 5.3.1.0 and i use Kingroot, only root, can I go to back to stock software if I have to give it to Amazon assistance?
Onlye root, not recovery modded or other rom.
Thanks
p.s.: not use slang with me, thanks

Palux said:
Hello, i have the latest Fire 7".
If i rollback from 5.3.2 to 5.3.1.0 and i use Kingroot, only root, can I go to back to stock software if I have to give it to Amazon assistance?
Click to expand...
Click to collapse
Yes - 5.3.1 can be reloaded again if pure stock is desired. However, this is not generally required for warranty exchanges (the only type of hardware assistance Amazon provides) as they do not perform a detailed inspection of returned devices.

Hey there, I followed the instructions as provided and everything seemed to work fine but now I am stuck and not sure if I should reboot it.
1. Downgraded from 5.3.2 to 5.3.1 -> worked
2. Install Kingroot with "AmazonFire5thGenSuperTool" and Root the device -> worked
3. Install FlashFire with "AmazonFire5thGenSuperTool"-> that did not work. I got the message that the APK is invalid.
4. Install Google Play Store
5. Install FlashFire from Google Play Store -> was that ok?!
6. Configure it as described in this thread which was linked. CM12 + Gapps Nano
I was confused because the instructions are a little bit different regarding the checkboxes compared to the other thread but I followed those instructions.
Device rebooted, and now I am seeing an Amazon Logo on the Screen since about 1,5h. It does not reboot or anything, it just shows the Amazon Logo
Should I reboot it or is it actually flashing right now since hours?
br

Arret said:
Hey there, I followed the instructions as provided and everything seemed to work fine but now I am stuck and not sure if I should reboot it.
1. Downgraded from 5.3.2 to 5.3.1 -> worked
2. Install Kingroot with "AmazonFire5thGenSuperTool" and Root the device -> worked
3. Install FlashFire with "AmazonFire5thGenSuperTool"-> that did not work. I got the message that the APK is invalid.
4. Install Google Play Store
5. Install FlashFire from Google Play Store -> was that ok?!
6. Configure it as described in this thread which was linked. CM12 + Gapps Nano
I was confused because the instructions are a little bit different regarding the checkboxes compared to the other thread but I followed those instructions.
Device rebooted, and now I am seeing an Amazon Logo on the Screen since about 1,5h. It does not reboot or anything, it just shows the Amazon Logo
Should I reboot it or is it actually flashing right now since hours?
Click to expand...
Click to collapse
Something went wrong; the Amazon Logo should display for <30 sec. You will need to reload FireOS 5.3.1 from the stock recovery menu and start over. Guidance here, here. Once recovered post back for further assistance loading CM 12.1.

[T-Mobile D6616] Updated Root Method Request

Good afternoon,
After MUCH research, I have arrived at the conclusion rooting the D6616 with T-Mobile's likely final Z3 build for 5.0.2 (Build 23.1.C.0.399 and, really anything past KK) is no longer possible without involving Kingroot.
Why does this matter? Because there may not be a feasible way to remove the most recent builds of Kingroot from the D6616 ROM. Using Kingroot's own uninstaller in the App settings fails and factory resetting using the ROM/stock recovery threw my phone into a bootloop. Other users report it successfully factory reset their ROM with kingroot installed as a system app and their device no longer rooted. I attribute the variety of outcomes to different software builds and Kingroot versions.
It seems as though the only working root method also uses ZXDualRecovery. Though I have not tried it, all procedures that show the ZXDualRecovery method of pushing recovery and superSU involved rooting the device with Kingroot first and removing it after SuperSU is installed. This appears to be the only still-working method of acquiring temporary root long enough to install recovery. The only way to remove Kingroot is to use flashtool and a new Sony TFT, which also removes root and recovery.
Has anyone successfully been able to pull off rooting a D6616 lately? I want to keep this phone but it is unfortunately useless to me without working root so I'll likely be returning it if nobody still has one that's running the last software with a locked bootloader.
I would really appreciate any help anyone can give.

I believe I have done it! I think SuperSU is ever so slightly ahead of Kingroot.
What I did:
1) Rooted via Kingroot app on Google Play. Run rootchecker after it's done its business to make sure. DO NOTHING ELSE IN THE APP. Doing so may prevent SuperSU from kicking its ass later.
2) Downloaded and upacked to desktop the file for Xperia Z3 from here:
http://nut.xperia-files.com/path/XZD...ecovery_2.8.26
Z3-lockeddualrecovery2.8.26.-RELEASE.combined.zip
3) Disabled antivirus
4) Installed USB drivers via Windows 7 plug-n-play. Unplug phone.
5) Downloaded SuperSU recovery flashable zip from here:
http://www.supersu.com/download#zip
6) Ran install.bat from extracted ZXDualRecovery zip
7) Enabled developer options in phone, enabled USB debugging, revoked USB devices, rebooted phone, plug in phone.
8) Connect Phone, wait for device to register in windows.
9) Okayed communication from PC.
10) Place in USB Install Mode on phone.
11) Choose option 2 to install to device rooted by SuperUser. Kingroot has blocked option 1 (old method)
12) Enter TWRP (Automatic) and go to Backup, check all boxes, create Nandroid by sliding the slider
13) Reboot, ensure phone boots. Put SuperSU.zip on the external flash drive. Go to your new App: NDR Utils. Choose TWRP as Primary Recovery. Choose Reboot to Primary recovery
14) Flash zip for SuperSU. DO NOTHING ELSE. Do not wipe cache, do not fix permissions. Click REBOOT.
15) Launch SuperSU App. Attempt to update Binaries. It will not, but it will detect Kingroot, and somehow can get rid of it itself using onboard capabilities. It will do so and update binaries.
16) Reboot (Automatic via SuperSU)
17) Check to make sure SuperSU binaries installed by launching the app.
18) Reboot to recovery using the steps from step 13) above.
19) Create another backup using step 12) above
20) Reboot and DONE.
To the best of my knowledge, nobody has indicated how to do this in a clear Step-By-Step for the final build of this ROM. So because I've troubled you all for small chunks of the process I figured I would.
This applies to T-Mobile's likely-final software release for the Xperia Z3 android 5.0.2 on build 23.1.C.0.399.
DISCLAIMER TO ANYONE ATTEMPTING THIS: It appears Kingroot is "onto" what it is being used for. Given the behavior of this application, there is no reason for anyone to believe it is not a malicious program, but it is a necessary evil for this purpose. Newer versions of SuperSU are capable of removing Kingroot on their own, but alternative methods may be necessary. I attempted an earlier version of SuperSU and it was incapable of removing Kingroot.
It might remove via debloater. This is the only way to remove the system apps on this phone reliably, so you WILL need it if you intend to keep the bootloader locked. I couldn't get any root-enabled appstore app to do it including ES File explorer and Titanium Backup. It looks like you need a computer to remove system apps on this phone. Fantastic. Debloater works great though so don't be afraid to use it. Use the filter to search for Apps. You can remove them, but they will not be gone until you reboot your device. Hooray no more filecommander and lookout! Debloater can be found here:
https://forum.xda-developers.com/and...bloat-t2998294
Plug in your phone. Give it root access. Easy peezy.
Then Xposed current framework and installer:
https://forum.xda-developers.com/sho....php?t=3034811
Version 3.1.1 fixed the bootloop problem, so you shouldn't need the fix zip, or at least I didn't. But if you do, you can find it here:
https://dottech.org/187028/how-to-fi...-z5-z4-z3-tip/
Flash the framework for your device in recovery (arm) and then the installer APK from the ROM using a file browser.
FINALLY Youtube Adblock and minimized playback. SCORE!
I think that's about it. That's literally the best we can currently hope for from this device. I think there is an Xposed module to heavily alter the look of the ROM here but I have not tried it. Plus it only claims to work w/ 4.4, and we have 5.0.1.
https://forum.xda-developers.com/z3/...6#post71601966
For devicewide adblocking I use DNS66 since there are no proxy settings for adblocking on this device, unless I'm missing something. I really hope I am. This means there's no native adblocking.
Xposed modules worth using you can find by searching in the Xposed store: Blurred System UI (LP), Gravity Box [LP], RootCloak, Xperia/AOSP NavBar Buttons, Xperia Super Radio, YouTube AdAway, YouTube Background Playback. And of course DNS66 (PlayStore).
I have tinkered with the rest and find them of no value.

I followed the steps but SU didn't ask to update anything. It just opens up and everything is fine?
Then all I did was unistall kingroot(purify) and it looks like it's gone, but is it?

Just leaving this here, this is how I rooted on Android 5.0.2 with the D6616
http://nut.xperia-files.com/
Read the documentation that comes with the latest XZDualRecovery and flash SuperSU or whatever you want.

stef-nix said:
Just leaving this here, this is how I rooted on Android 5.0.2 with the D6616
http://nut.xperia-files.com/
Read the documentation that comes with the latest XZDualRecovery and flash SuperSU or whatever you want.
Click to expand...
Click to collapse
Were you able to install twrp without rooting first on your PC? It doesn't work for me. I did option 3, install on unrooted device.
Are you able to systemless root?

When I run the installation it fails at step 3 on the install bat.

Hi, a bit of an old thread, but has anyone had any success rooting the D6616 without using Kingoroot or Kingroot? Both are malware which are designed to not be fully removed and be as resilient as possible, and uninstall does not actually uninstall them...

Yes, the old method still works. Use the search feature. I'd just link you, but I"m busy at the moment.

i followed these steps, and have gotten to the point where you flash supersu and reboot, but i'm stuck in a reboot loop now. wanted to use this old z3 as a dedicated audio player, and needed to root for some audio enhancements...
edit: i did have TWRP for a minute, but now when i go into recovery it's the stock recovery again, with options only to continue booting, boot to safe mode, factory recovery or power down. the first two options return to a boot loop. can/should i attempt to use flashtool, or factory recovery? i don't want to accidentally wipe something i might need in the backup.\
UPDATE 10/19: I was able to get back to ground zero using Sony's xperia companion software repair. Flashtool 9.25 and 9.26 would never successfully install flashmode drivers, nor would it display the stock .ftf file.

fierogt42 said:
Yes, the old method still works. Use the search feature. I'd just link you, but I"m busy at the moment.
Click to expand...
Click to collapse
this new method seems to fail for me on both of my old z3's. does the method you're referring to involve downgrading to 4.4.4? i've done some extensive searching of this forum (and the android development ones as well) but don't seem to be able to find any other info.

Installing Magisk v14 on galaxy s4 gt-i9515

Hello friends, I am trying to install Magisk on a Galaxy s4 gt-i9515, non-rooted, with TWRP recovery device.
I tried both methods described in the official thread: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Both tries failed. I will now explain in more detail what I've done.
Before, note that I have a TWRP recovery of the state before flashing any zips/boot.img s, so I am constantly going back to the previous state which passes safetynet.
First try:
I simply took the magisk-v14.zip file and installed through TWRP. The installation had no errors and in the end TWRP claimed "success". TWRP asked me to reboot now.
I clicked on "Reboot", and then TWRP told that "My device is currently not rooted" and asked if I want to install root or reboot anyways. I rebooted anyways (I didn't let TWRP install his own root).
When the device boot up, I got into magisk manager, but sadly it was written that I am not rooted, and I don't have a magisk installed. Now, it also failed to pass safetynet.
At this point I used my Backup and got back to the state which I could pass safetynet (I've checked it again to make sure).
Second try:
I got the boot.img of the stock firmware I am currently using (I recently flashed this firmware, so it has to be the right boot.img).
I got into Magisk Manager and patched the boot.img. Magisk patched it into a file called "patched_boot.img.tar".
I got into download mode on my device, and flashed the .tar file via ODIN (AP option, ODIN version 3.12.3).
The device rebooted after the installation was "complete" according to ODIN: <OSM> All threads completed. (succeed 1 / failed 0).
When the device booted up, I entered the Magisk manager, and still, no root + no magisk installed. This time tho, it passed SN.
I used my backup again.
Now I am stuck. I really don't know what can I try anymore. Please suggest me ideas.

Up. I still need answers.

i have mnanaged to install latest stable version of magisk using latest twrp 3.1.1.0, and root management is in function. however, i cannot install any magisk module, tested xposed api21 but it does not install, also greenify4magisk still nothing to be noticed, unfortunately as there is yet no response i suppose its a lost cause, well lets just root manually supersu or things like that.

hi, Samsung S4 i 9505 I have not solved with Magisk and I don't even try "patched_boot.img.tar" the problem in it is apk and not the file it TWRP starts I remember apk EdXposed 2 years ago there were failures I thought about installing stock firmware/Rom with Frja Tool we talk about android 10/11 is android 5.0.1 I think there is only one way is SuperSu this root does not pose problems there is a saying: the more cooks around a dish, the more they ruin it"

I was able to install Magisk v24.3 today on my Galaxy S4 Mini LTE (GT-I9195) using partially the "Patching Images" method and TWRP 3.2.3. I had Magisk v23 installed but since a couple of weeks ago it kept crashing. So, I did the big mistake of uninstalling it to update to the latest version. It costed me half a day around this.
I could not flash zips in TWRP recovery (it always failed with Updater process ended with ERROR:1)
1 - Get a copy of the boot.img (for this step I had to find the installation file of my ROM. I did not know for sure which was it since it was installed 2 years ago. I have an AOPK based ROM and all the files from their website are not available anymore. All I could find was an older one on androidfilehost "aokp_serranoltexx_pie_unofficial_2020-01-18_1053.zip". Uncompress this zip to get the boot.img file.
2 - Copy the boot.img to your device filesystem.
3 - Power on the phone with "vol down+home+power" to enter TWRP, choose Install, Image, and flash boot.img, reboot
4 - Download and install the latest Magisk v24.3 apk
5 - Press the Install button in Magisk app (this means pressing the second “Install”, the one on front of App.)
6 - It should ask you to choose “Select and Patch a File”. Search and select the boot.img
7 - If all goes well, it should create a file named magisk_patched_[random_strings].img
8 - Power on the phone with "vol down+home+power" to enter TWRP, choose Install, Image, and flash magisk_patched_[random_strings].img, reboot
9 - Reboot and confirm in Magisk app if it says “Installed 24.3 (24300)“.
Now I get a warning "Your device needs additional setup for magisk to work properly... reboot" when entering Magisk, but it seems to work fine.
I have a bottle of champagne saved for the day when windows laptops are miniaturized and android is discontinued from the market. Bootloaders, recoveries, ramdisk, getting root, knox, odin, oem unlockings, CSCs, APs, customs kernels, adb, vbmeta, adoptable storage, se policies, fastboot modes, download modes... damn. They couldn't make it more complex if they tried.

How to root Z00LD ZE550KL without a PC (data cable doesn't work)?

I have a Zenfone 2 Laser that I'd like to root and install a custom ROM, but unfortunately the data cable is not working, only charging, even in fastboot or recovery mode. Tried other USB cables and other PCs, didn't work.
So I need to root from the phone itself.
I tried KingRoot, OneClickRoot, and a few other old root apps (framaroot and towelroot) but none of them seem to work. Kingroot puts me in a queue and OneClickRoot says I can root my phone but I need a PC (adb), which I can't do. In Developer Options I didn't find the option to use ADB over network. EDIT: also tried Rootmaster, UniversalAndRoot and KingoRoot.
Android 6.0.1 (Marshmallow), security patch level February 5, 2018
ASUS Zenfone 2 Laser Z00LD ZE550KL
Is there another way to root this phone without a PC?
Thanks in advance
EDIT: I might be able to root it if I can downgrade to Android 5.0 (Lollipop) and I managed to download an old version of ASUS stock ROM from here but when I try to install from the stock recovery it says my ROM is newer than the one I'm installing. Editing the update-script in the zip file to bypass this makes the update not flashable anymore (error signature check). This guide shows how to fix it, but a PC is needed, which I can't use (data cable doesn't work). How can I make a genuine package for downgrading?