When 13.0 will be relased?
Today
My camera now working??
Flash this.
Are dual sim supported?
Legacy for now(only one sim)
Will you stop at cm13.0?
No, i will relase cm14.1 shortly after cm13.0
hi n1kolaa
where can i find cm13?
by nikita?it have problem in kernel,camera,glitch
and camera is not from system files it's from kernel
it not fix with camera fix.zip
It will be online soon with new thread!
Hiii:highfive:
You ARE making s3neo great again !
Thank you very much )
can't wait for cm 14.1
I tried CM13 by Nikita and dualsim works PERFECTLY why remove it?
No problem
will be soon dev builds
I didnt remove it, will make one more device for dualsim
Hi n1kolaa, please where can i find cm 13?
here
which one?
Related
Hello,
I have a couple of problems with my Samsung Galaxy S III Duos (I9300). CM 12, CM 12.1.
1. I cannot switch to use Internet from another sim card. It always uses just one of them. I tried swapping cards, It just chooses one of them, not always sim in slot 1.
2. Problem with Bluetooth in car (BMW, CCC). When I call (incoming/outgoing call) from one sim card everything is fine. When I call from another sim, car answers the phone and shows duration of a call, but no sound.
U are using latest build?
ziad311 said:
U are using latest build?
Click to expand...
Click to collapse
I noticed these bugs when I was on CM12 or CM11 (not sure which one, November 2015 release, Android 5.0.1 if I'm not mistaken), flashed back to stock 4.4.4, both bugs disappeared, so I guess it was not a hardware problem. Then I tried CM 12.1 20151225 release, both bugs were still in the ROM, so I flashed 4.4.4 again.
Can anyone confirm if they have the same bugs or if they are known at all.
Thanks.
Flash latest cm12.1 not cm12
Android 5.1.1 not 5.0.2
ziad311 said:
Flash latest cm12.1 not cm12
Android 5.1.1 not 5.0.2
Click to expand...
Click to collapse
As I already wrote I did flash CM12.1 dated 25.12.2015 from here
http://forum.xda-developers.com/galaxy-s3-neo/orig-development/rom-cyanogenmod-12-1-s3-neo-t3099384
It didn't work either. Is it possible that I chose the wrong GApps and this was the reason?
I think I used open gapps stock version, but not sure, don't have that SD card and can't check now.
i have used CM12 and 12.1 rox and RR and i don't recall these two problems that you have mentioned specially the internet problem to me it was perfect but with a little reboot here and there so soory i couldn't help.
P.S :soory for my bad english
Hello everybody,
I'm new to Zuk Z1 and I'm pretty happy with my latest Cyanogen OS 12.1 official build, waiting for Cyanogen OS 13 release, sooner or later.
I love modding too, and I'd like to try Mr.Coldbird CM13 (http://forum.xda-developers.com/zuk-z1/orig-development/unofficial-cm13-t3277885), because it looks better than official CM13 builds and also a lot more customizable than COS.
If anyone have tried them both, can you please post your impressions and also the main differences between the two firmwares?
Thanks in advice!
Both cm 13 rom 's look the same and look even the same than COS 12.1. cm13 is still beta and it is impossible to switch a single sim card off for the moment. You can do that in COS 12.1. As for the customization the roms are the same too. Only the rom 's built by @OrdenKrieger like temasek or RessurectionRom are more customized. If you really can't wait for the official launch you should try the official cm13 first as it does update your phone to be able to run other cm13 rom "s too without the need to flash a unknown custom made blobs zip.
Enjoy your Zuk Z1 with working Fingerprint on Cyanogen Software.
Planet X said:
Both cm 13 rom 's look the same and look even the same than COS 12.1. cm13 is still beta and it is impossible to switch a single sim card off for the moment. You can do that in COS 12.1. As for the customization the roms are the same too. Only the rom 's built by @OrdenKrieger like temasek or RessurectionRom are more customized. If you really can't wait for the official launch you should try the official cm13 first as it does update your phone to be able to run other cm13 rom "s too without the need to flash a unknown custom made blobs zip.
Enjoy your Zuk Z1 with working Fingerprint on Cyanogen Software.
Click to expand...
Click to collapse
Thanks for your answer!
I mentioned Mr.Coldbird's CM13 because I read that it has working fingerprint and usb-otg, while official CM13 has not.
I'll take a look at the other ones you mentioned.
What I'd like for my Zuk is:
- Working fingerprint and unlock with soft touch (not press).
- Ambient Display (I came from a 2013 Moto X :sigh.
- "Ok Google" with screen off (see above :sigh.
- Something to ease one-hand usage (got very small hands).
- Better camera app than COS one.
- Better fingerprint integration (can only use it for phone unlock).
Hello All,
This query is regarding Redmi 2 Custom Rom. Is there any Custom ROM which supports VoLTE?
In India, Reliance Jio is launching 4G which will require VoLTE and hence this query. I have read that MIUI based on Lollipop base does support VoLTE but have not seen that option in Custom ROMs. Thanks in advance for help & comments
Edit
Basis feedback from users, to get VoLTE working following is solution:
1) One needs to first flash MIUI LP ROM (to get LP bootloader)
2) Second follow this by flashing ROMs like Orion, Mokee etc which supports VoLTE over LP bootloader
Read next post for details
Enable VoLTE in Redmi 2
The solution to get VoLTE working is following :
1) First, one needs to flash MIUI LP ROM (to get LP bootloader)
2) Second, flash ROMs like Orion, Mokee, RR, Project X, CM 13 etc which supports VoLTE over LP bootloader
3) Insert sim (example Jio for Indian users) and reboot. If required might have to create APN "ims"
4) In case APN "ims" doesn't work very well, pls follow this post here to replace apns config file.
That's it.. this will work.
Credits to multiple users from this thread. Cheers guys for being supportive
mGforCe said:
Bump ! Anyone who can help here.. Thanks
Click to expand...
Click to collapse
cm13 i think... yes.. cm13 snapshot.
neerajkumar18 said:
cm13 i think... yes.. cm13 snapshot.
Click to expand...
Click to collapse
Thanks Neeraj. Have you tried it? Any experience..
mGforCe said:
Thanks Neeraj. Have you tried it? Any experience..
Click to expand...
Click to collapse
no i haven't tried
Cm13 snapshot
Sent from my 2014818 using XDA-Developers mobile app
CM13 base Custom Roms does not support VoLTE
Im currently on Mokee with Jio sim & volte call does work. :good: I think cm13 too would work, Tesla didn't. Remember to be in lollipop firmware with volte support before flashing custom rom .
mits619 said:
Im currently on Mokee with Jio sim & volte call does work. :good: I think cm13 too would work, Tesla didn't. Remember to be in lollipop firmware with volte support before flashing custom rom .
Click to expand...
Click to collapse
Can you try on DU latest build and confirm for me if it's working for you?
Cm-13
I am having a question.. When I'm using any custom rom and using my Jio 4G sim in any of the custom rom the performance isn't that great. For eg. If I'm getting 34mbps speed in MIUI then in any custom ROM i will be getting 0.5-1.0 Mbps speed. Can anyone tell me why is this happening and any workaround for it?
[/COLOR]
mits619 said:
Im currently on Mokee with Jio sim & volte call does work. :good: I think cm13 too would work, Tesla didn't. Remember to be in lollipop firmware with volte support before flashing custom rom .
Click to expand...
Click to collapse
I tried d same..but calls nt wrkng..help bro
why install custom.. just install miui lollipop of redmi 2 prime and use VoLTE. it works
So in order to get VoLTE support on CM13, do you have to have Lollipop Bootloader and Modem flashed?
What about MM custom ROMs? Can anyone tell me for a fact if any ROM supports VoLTE. Also, can anyone confirm if this guide works for custom ROMs?
Can I Install the redmi 2 prime lollipop rom on redmi 2 1gb ram version are you sure it works, if not then what rom supports VoLte on 1gb redmi 2.
For me volte working perfectly
Cm 13, Zephyr, aicp, mokee
---------- Post added at 03:06 AM ---------- Previous post was at 03:04 AM ----------
shabtab said:
Can I Install the redmi 2 prime lollipop rom on redmi 2 1gb ram version are you sure it works, if not then what rom supports VoLte on 1gb redmi 2.
Click to expand...
Click to collapse
My friend using miui 8 Lollipop based ROM in Redmi 2 and it's working fine
mits619 said:
Im currently on Mokee with Jio sim & volte call does work. :good: I think cm13 too would work, Tesla didn't. Remember to be in lollipop firmware with volte support before flashing custom rom .
Click to expand...
Click to collapse
Which Mokee, Lollipop or Marshmallow?
Hi.. I don't know why. But jio 4g sim is not working in my cm13. I was rocking the stable miui 7 build that's v7.5. Its working fine in that. I have had no luck in making it work in cm13. Please help
nairitmukherjee0007 said:
Hi.. I don't know why. But jio 4g sim is not working in my cm13. I was rocking the stable miui 7 build that's v7.5. Its working fine in that. I have had no luck in making it work in cm13. Please help
Click to expand...
Click to collapse
I read this somewhere in CM13 thread. Try these APN settings it should work
For volte go to network setting then select apn.
Add new apn with below details for volte
Name - jio
APN - ims
APN Type - ims
Rest of things you can keep as it is.
Also for 4g internet
Name - jio4g
APN - jionet
APN Type - default
Hey i tryed long by my self with my new note3 pro
This is how i got all working for me
- unlock bootloader officially
- Flash official TWRP
- Wipe all
- Flash CM13 Firmware then reboot recovery!!! (The Strix)
- Flash CM13 or AOSP 6.0.1 Rom
- Flash latest open Gapps
- Flash Goodix_FP_8
- Flash AgNi Pure CM kernel or Radon 2.9
- Flash CM13Radio ------> important! or you stuck in a bootloop at some roms (The Strix)
Hope i helped some people with this :fingers-crossed:
There you go for fp8 https://yadi.sk/d/YX644C9UvjMNj
and here is Radio https://drive.google.com/file/d/0B2CgYqnPbCh_RnJDaHJtdEFYRGM/view
Remember this is not my work. I post this, to help all others who got stucked like me.
Just wanna save those guys some time!
Can you give download link.. For goodix fp8 and cm13radio, i only have cm 13 firmware. I will try in rombased cm13. Thanks before
illall said:
Can you give download link.. For goodix fp8 and cm13radio, i only have cm 13 firmware. I will try in rombased cm13. Thanks before
Click to expand...
Click to collapse
There you go for fp8 https://yadi.sk/d/YX644C9UvjMNj
and here is Radio https://drive.google.com/file/d/0B2CgYqnPbCh_RnJDaHJtdEFYRGM/view
Remember this is not my work. I post this, to help all others who got stucked like me.
Just wanna save those guys some time!
This doesn't work for me.
Hello,
I tried yours, only Radon 3.2 instead of 2.9. Camera works like a charm but not Goodix FP. What should I do?
thanks
worked perfect on my kenzoo with goodix fp
I am running resurrection remix v5.8.4 android version 7.1.2 on my j5 2016. Since the camera quality of this rom's camera app is completely trash i considered flashing the stock samsung camera app. My question is: is this possible or will i get in trouble and by that i mean boot loops or incompatibility problems. Is it safe to do so?
Hey there I faced the same problem I tried installing stock camera apps but didn't worked then I found an update resurrection remix v5.8.5 in which all the issues r being resolved and my camera is working fine and also the flash light issue .but the only problem of all the resurrection remix is that it don't support volte. If u like to flash the update I would like to share the link of the new update of it .
mjhonny14377 said:
Hey there I faced the same problem I tried installing stock camera apps but didn't worked then I found an update resurrection remix v5.8.5 in which all the issues r being resolved and my camera is working fine and also the flash light issue .but the only problem of all the resurrection remix is that it don't support volte. If u like to flash the update I would like to share the link of the new update of it .
Click to expand...
Click to collapse
I would be really grateful
Here is the link download it and flash it via recovery don't forget g apps u need gapps
https://androidfilehost.com/?fid=889964283620753628
Hope u will like it
Thanks bro !