I accidentally flashed wrog system.img in my Moto E3. Now I can only access twrp recovery and nothing else. So I request other rooted Moto E3 holders to upload a fresh Nandroid backup from their devices or if you have the correct system.img of Moto XT1706 then please upload it or share its link.
http://www.mediafire.com/file/f0o0ox...160905_ROW.zip
Can Someone Help Me?
Can Some One Please Help Me? I Need The Same System.img but for XT1700 Model Please If SomeOne Can Share It.
@vishalonxda I found this link while searching for same. My browser reported connection unsafe but I proceeded further and file started downloading. You can try and let us know if it works or not
https://firmware.center/firmware/Motorola/Moto E3 Power (Lenovo XT1706)/Stock/
Edit: Sorry I thought your device was E3 power don't download this.
sfreddy15 said:
Can Some One Please Help Me? I Need The Same System.img but for XT1700 Model Please If SomeOne Can Share It.
Click to expand...
Click to collapse
Download the XT1706 one, because every website that has XT1700 firmware on it requires a premium membership or a fee.
I'm using XT1706 firmware on my XT1700 and I can confirm it runs fine with no issues.
The only difference is now as the XT1706 is a dual SIM model, and the XT1700 is single SIM, you will have a second SIM showing in your settings that is blanked out.
I wrongly assumed the XT1706 ROM wouldn't work on a XT1700 but the third party device repairer acting on behalf of Motorola reflashed my XT1700 with XT1706 firmware after a failed OTA update.
I can confirm it does work fine with no issues what so ever.
I can also tell you the repairer downloaded the file that is linked in this very thread and flashed it.
I would not recommend doing this yourself, my dad is a senior XDA member and he wasn't sure this would work, but when your device is left in the hands of a professional, you just have to trust them I suppose.....
If you take this route, and I'm not telling you to, im just suggesting it, you need to download and extract the rom file and place the extracted file in the TWRP backup folder and flash that via twrp.
This is what was done to my device.
I know some people are going to doubt what has happened to me, but I have no reason to tell any lies, Motorola offered me a brand new E3 but I chose to have mine repaired as it's only a few weeks old.
The XT1706 E3 power is not available in Europe or the UK, and I can confirm using the Powers firmware in the UK I have no service issues and 4g connection is working perfectly for me.
I have the downloaded and extracted TWRP backup XT1706 file if you want it.
Good luck.
Hope you get sorted ?
Thanks friend I did what you suggested and it worked I used a backup of twrp and restored system from tx1706 backup and phone is running fine I appreciate your help I was crazy trying to look the xt1700 backup
sfreddy15 said:
Thanks friend I did what you suggested and it worked I used a backup of twrp and restored system from tx1706 backup and phone is running fine I appreciate your help I was crazy trying to look the xt1700 backup
Click to expand...
Click to collapse
No problem.
Glad I could help you ?
Can anyone please upload the whole stock rom twrp backup? My imei is gone n shoes as invalid imei. Please include nvram n all the other partitions.
Actually i want moto e3 power nvram.bin file as i got the error "nvram warning=0x10" so to fix it can anyone original moto user send me the file of it
Thanks for advance
bubba1601 said:
No problem.
Glad I could help ....
Click to expand...
Click to collapse
also can anyone send me the file in the link if anyone has purchased and downloaded from this "https://firmware.gem-flash.com/index.php?a=downloads&b=file&id=82943" please please anyone
thanks in advance
Related
I am just reuploading.
Thanks to toto221 for providing the .enc file and thanks to drkcobra for showing how to convert to sbf.
1FF-p3_kronos_cdma_kronos-user-2.3.5-4.5.1-KNS-29-BST-15-18-release-keys-signed-Boost-US.sbf
http://mir.cr/XT254QDM
http://ul.to/d69svyqu
http://d01.megashares.com/dl/Y0RkwO...29-BST-15-18-release-keys-signed-Boost-US.rar
http://rapidgator.net/file/37089266...T-15-18-release-keys-signed-Boost-US.rar.html
http://bayfiles.com/file/kzu5/dBzB6...29-BST-15-18-release-keys-signed-Boost-US.rar
*WARNING* Even though both models have Sprint logo, the Boost XPRTs are bricked if you flash the Sprint SBF so only flash Boost specific SBF on Boost XPRTs.
I can confirm that this "BOOST XPRT SBF works on Sprint XPRT".
My phone was bricked due to boot-loader error. But this SBF helped me to recover my phone back.
very happy
kapilthio said:
I can confirm that this "BOOST XPRT SBF works on Sprint XPRT".
My phone was bricked due to boot-loader error. But this SBF helped me to recover my phone back.
very happy
Click to expand...
Click to collapse
Are you sure, yours was a Sprint XPRT orignally and its not running Boost SBF? if yes, then thats great news.
All we need now is a root method for GB on XPRT
surfturtle said:
Are you sure, yours was a Sprint XPRT orignally and its not running Boost SBF? if yes, then thats great news.
All we need now is a root method for GB on XPRT
Click to expand...
Click to collapse
I am very sure. I have sprint over the phone (with Sprint Box) and after SBF, it shows Boost in About Phone.
Version - 45.3.15.MB612.Boost.en.US
I do not know what you need to do for CDMA activation on Sprint while you are using Boost ROM. But GSM works just fine
surfturtle said:
I am just reuploading.
Thanks to toto221 for providing the .enc file and thanks to drkcobra for showing how to convert to sbf.
1FF-p3_kronos_cdma_kronos-user-2.3.5-4.5.1-KNS-29-BST-15-18-release-keys-signed-Boost-US.sbf
http://mir.cr/XT254QDM
http://ul.to/d69svyqu
http://d01.megashares.com/dl/Y0RkwO...29-BST-15-18-release-keys-signed-Boost-US.rar
http://rapidgator.net/file/37089266...T-15-18-release-keys-signed-Boost-US.rar.html
http://bayfiles.com/file/kzu5/dBzB6...29-BST-15-18-release-keys-signed-Boost-US.rar
*WARNING* Even though both models have Sprint logo, the Boost XPRTs are bricked if you flash the Sprint SBF so only flash Boost specific SBF on Boost XPRTs.
Click to expand...
Click to collapse
To download the actual file, should i install that livid stuff that these links are throwing?
Also I need to use the XPRT in India. Currently mine is stuck in contacting the server and I am not able to open any menu. Will flashing this help it recover?
Thanks,
Rao
THANKS!!
bytebrahma said:
To download the actual file, should i install that livid stuff that these links are throwing?
Also I need to use the XPRT in India. Currently mine is stuck in contacting the server and I am not able to open any menu. Will flashing this help it recover?
Thanks,
Rao
Click to expand...
Click to collapse
THANKS to all who uploaded this sbf and helped me resurrected my phone! But I am not able to connect to GPRS/3G.. To add an APN (Lebara Australia) I add all details, but after save the APN doesnt show up in the list. Anyone faced this issue?
Thanks,
Rao.
Hello surfturtle,
My girlfriend has a new BOOST XPRT from a Boost Mobile Store that came with GB 2.3.5, but anytime any of her Brazilian GSM SIM cards connect to their network (we've tried TIM and Vivo SIMs) the phone reboots endlessly. The system version already installed on the phone is: 45.3.15.MB612.Boost.en.US
Thinking about reinstalling the one you posted over it, in case the original one on the phone is messed up and causing the GSM issue. What do you think, and how exactly would I do it?
Cheers,
Matt
Sent from my Boost Mobile Motorola XPRT MB612
bytebrahma said:
To download the actual file, should i install that livid stuff that these links are throwing?
Also I need to use the XPRT in India. Currently mine is stuck in contacting the server and I am not able to open any menu. Will flashing this help it recover?
Thanks,
Rao
Click to expand...
Click to collapse
YOU SHOULD NEVER DOWNLOAD LIVID!!!!
Livid is AdWare that many download sites use to generate income from clicks. All those "other" Livid download links are just the same link downloading the "LividInstaller.exe" file.
ALWAYS LOOK FOR THE "REAL" DOWNLOAD LINK, USUALLY ACCOMPANIED BY SOME SORT OF TIMER AND CAPTCHA
JUST TO BE CLEAR:
DO NOT CLICK ON ADS HOSTED LIKE THIS ON DOWNLOAD SITES. IF YOU DO THEN YOU ARE ASKING FOR PROBLEMS WITH YOUR COMPUTER, INCLUDING TOOLBARS, CRAPWARE, ADWARE, SPYWARE, MALWARE, ETC!!!!
YOU HAVE BEEN WARNED!!!
@surfturtle: thanks for this file! It was hard to track down
Awesome, thank you so much! Downloading now (40 more minutes haha) hopefully to cure my phone.
All the links seems to be broken, except rapidgator which too seems to be down. Can someone upload the sbf files please.
harishatrix said:
All the links seems to be broken, except rapidgator which too seems to be down. Can someone upload the sbf files please.
Click to expand...
Click to collapse
you are welcome
1FF-p3_kronos_cdma_kronos-user-2.3.5-4.5.1-110-KNS-46-49-test-keys-signed-Sprint-US.rar
1FF-p3_kronos_cdma_kronos-user-2.3.5-4.5.1-KNS-29-BST-15-18-release-keys-signed-Boost-US.rar
Work in GSM mode
I erased important system files when rooting, no update.zip package worked from recovery mode. The only thing I could do was use "1FF-p3_kronos_cdma_kronos-user-2.3.5-4.5.1-110-KNS-46-49-test-keys-signed-Sprint-US". The phone boots normally, but when put sim card, in gsm mode, restarts over and over, I don't know what else to do, please help me
tekkaman7 said:
I erased important system files when rooting, no update.zip package worked from recovery mode. The only thing I could do was use "1FF-p3_kronos_cdma_kronos-user-2.3.5-4.5.1-110-KNS-46-49-test-keys-signed-Sprint-US". The phone boots normally, but when put sim card, in gsm mode, restarts over and over, I don't know what else to do, please help me
Click to expand...
Click to collapse
Here is the fix
http://forum.xda-developers.com/showpost.php?p=33320200&postcount=676
Better later , than never ...
the link is broken
why i can't extract the sbf that downloaded from link #1 above
and the link #2 is broken
i'm sorry,but i need it to unbrick my xprt
Good Night. There´s anyone who have the .SBF and can upload it again? I bricked my phone and need it urgently. I´ll be very grateful
Could you upload the sbf files again please? I need to recover my phone ´cause i bricked it.
Hello everybody.
I tried to root and flash my A2017G model. I already tried the european and us-version of the images. But with all attemps, my phone does not connect to my mobile carrier. I can search and find my carrier-network, but an attemp to connect fails. I might flashed a wrong modem or something like that. Also I flashed back original boot and recovery and installed A2017_B06 update from ZTE Website, but no change.
Any ideas?
Actually back on A2017G_B03:
Baseband-Version: M8996FAAAANAZM-1.56471.1.60235.1
Kernel-Version: 3.18.20
Build-Nummer: ZTE A2017GV1.0.0B03
Thanks for help
I think the missing imei are the problem. does anyone knows a proper method to write the imei back to the phone?
Follow this
http://forum.xda-developers.com/showpost.php?p=69773001&postcount=6
Axon 7 flashed to A2017U B29 with TWRP... mobile radio broken
I'm having a similar issue.
So I followed the excellent guides on XDA (with huge thanks to @DrakenFX - who seems to have a hand in all the good tutorials) and flashed A2017U B29 onto my chinese A2017 B07 phone....
Everything was great. I had 4G but not LTE... so I got greedy and tried to be 'clever' and used TWRP to do the following
4- flash B27 bootstack zip
5- flash B29 bootstack zip
6- flash B29 system zip
Now I've lost the ability of the SIm to get the network. And when I look up the IMEI number - there are 2 on the phone!!
Can someone please please help me as I'm a total noob at all this and will need some hand holding from people who know better. I have TWRP on the phone. Much appreciated!
---------- Post added at 01:13 AM ---------- Previous post was at 12:38 AM ----------
CardAxon said:
I'm having a similar issue.
So I followed the excellent guides on XDA (with huge thanks to @DrakenFX - who seems to have a hand in all the good tutorials) and flashed A2017U B29 onto my chinese A2017 B07 phone....
Everything was great. I had 4G but not LTE... so I got greedy and tried to be 'clever' and used TWRP to do the following
4- flash B27 bootstack zip
5- flash B29 bootstack zip
6- flash B29 system zip
Now I've lost the ability of the SIm to get the network. And when I look up the IMEI number - there are 2 on the phone!!
Can someone please please help me as I'm a total noob at all this and will need some hand holding from people who know better. I have TWRP on the phone. Much appreciated!
Click to expand...
Click to collapse
SORRY - just realised that you should have 2 IMEI numbers on a dual SIM phone... still dont have cellular network so still need help with that if anyone is out there
DrakenFX said:
Follow this
http://forum.xda-developers.com/showpost.php?p=69773001&postcount=6
Click to expand...
Click to collapse
Hi @DrakenFX - thanks for the very helpful guides on unlocking bootloader and TWRP on Axon 7. I unfortunately lost all cellular network radio capability after I installed the BootStack for A2017U B29. Could you please advise me on how to get it working again?? WiFi works fine and I know the SIM card works as I have tried it on another phone
Worried its to do with EFS - really lost and stuck and any help would be appreciated!
I have tried wiping all data, cache, system and installing other ROMs including the new one you've posted with the on-screen nav buttons which installed fine and works - but again no cellular signal.
I have TWRP and unlocked bootloader and I am open to any advice
---------- Post added at 09:36 PM ---------- Previous post was at 09:34 PM ----------
Olli55 said:
I think the missing imei are the problem. does anyone knows a proper method to write the imei back to the phone?
Click to expand...
Click to collapse
Did you get it working again?? I am in the same boat so please let me know if it worked! Good luck buddy!
CardAxon said:
I'm having a similar issue.
So I followed the excellent guides on XDA (with huge thanks to @DrakenFX - who seems to have a hand in all the good tutorials) and flashed A2017U B29 onto my chinese A2017 B07 phone....
Everything was great. I had 4G but not LTE... so I got greedy and tried to be 'clever' and used TWRP to do the following
4- flash B27 bootstack zip
5- flash B29 bootstack zip
6- flash B29 system zip
Now I've lost the ability of the SIm to get the network. And when I look up the IMEI number - there are 2 on the phone!!
Can someone please please help me as I'm a total noob at all this and will need some hand holding from people who know better. I have TWRP on the phone. Much appreciated!
Click to expand...
Click to collapse
I think that's your problem. The bootstack zip contains a number of low level partitions. There are differences between the models. While it's generally safe to flash a system/kernel from another region, flashing these low level partitions is not advisable. See if you can get your hands on a full firmware package for your specific device. Actually, that should be step #1 before flashing anything so you have a way of going back in case something goes wrong .
I don't see anything in the guide about flashing b29 on a b07 phone. It also says multiple times to make backups...
Did you fix it ? I had same problem . bu now US and CH rom, on both mobile Internet is working. on US you must setup APN settings by ur self...
and Sim card manager is crashing, open APN settings from Data Usage.
Did you fix this issue? I am in the same boat as you. Please share your experience with resolving this issue.
You just can't recover Imei.
It happens to me too, and ZTE had no choice but to change motherboard with 2 new Imei.
I've tried to flash modem, rewrite imei with DualWriteImei, flash stock, flash modem from LoS ... and much more that i can't remember ATM. ZTE Repair center was my last chance.
Took me 3 weeks for repair in France for free.
PS : Before returning it, i've restored stock and relocked bootloader ... You should do the same
Hi guys ! I hope you'll be able to help me.
i restored my Moto G4 play to 6.0.1
Then, i updated it to 6.0.1 and after it installed the phone is no longer powering up, even plugged in USB. My computer is recognizing it as QHSUSB_bulk.
I installed a driver for it to ne recognized as a qualcomm com port.
I know that my bootloader is broken so i need a blank flash image to "reinstall" it
Can someone in this forum help me ?
My model is XT1603.
Thanks in advance !
please be aware that the partitions the op is requesting contain personal, sensitive data, like your google password, and imei, which can not be deleted with a standard recovery wipe. It is not recommended anyone who does no understand what information any partition backup contains, refrain from responding, for your own protection. with the collective partitions the op is requesting, they can have a 100% duplicate of your device, including your personal information.
You and developer if and it does not seem what I am losing is not files containing personal data to before answering question search first what is hardbrick
The file that I am requesting the file and the file of the motorola that released for moto g1 and the one to recover cell from the hardbrick
i fixed my xt1601 with this file
i am trying to post a link
blob:https:// mega.nz/ afae4b98 -8c17 -4f33 -8c3e -d334855e7dfa
i have tried lots of blank flashes and this one worked for my XT1601
remove all the spaces from link
jmak2008 said:
i am trying to post a link
blob:https:// mega.nz/ afae4b98 -8c17 -4f33 -8c3e -d334855e7dfa
i have tried lots of blank flashes and this one worked for my XT1601
remove all the spaces from link
Click to expand...
Click to collapse
do you have the blankflash ?, the link is not working
I spent a lot of hours in Google after hard bricking my moto x force, but failed to find any reliable solution.pls help......
Actually I was using moto x force Of RETEU version. I had flashed the Mexican firmware in order to make it dual sim, and after that i flashed OTA update and that was my most stupid thing......after that phone has completely dead, only computer is detected as Qualcomm HS_USB 9008 in device manager.
Pls HELP ANYONE TO FIX IT.
Many many thanks in advance.
edit/update
I have managed the dump rom files from a working moto x force, that's called loader.img by the great help of some amazing and helpful Brazilian friends. So kindly request all the volunteers if they may build the necessary blank-flash file from this loader.img
Here the link for loader.img =>>
https://drive.google.com/file/d/1KC0nhQqE6XG2jkCrlkGcqkEuLVvxXeUt/view?usp=drivesdk
Nobody can, only Repair Center................. maybe
aditya.addi said:
I spent a lot of hours in Google after hard bricking my moto x force, but failed to find any reliable solution.pls help......
Actually I was using moto x force Of RETEU version. I had flashed the Mexican firmware in order to make it dual sim, and after that i flashed OTA update and that was my most stupid thing......after that phone has completely dead, only computer is detected as Qualcomm HS_USB 9008 in device manager.
Pls HELP ANYONE TO FIX IT.
Many many thanks in advance.
Click to expand...
Click to collapse
File request to fix moto x force (xt1580) to fix HARD brick.
Hi friends, I somehow hard bricked my moto x force (xt1580).
To fix it I just need a file called loader.img. that may be dump from a working moto x force using the following command
dd if=/dev/block/mmcblk0 of=/sdcard/Loader.img bs=1024 count=168960
In fastboot mode.
Update!!!!
With a great help of some Brazilian friends,i have managed the above loader file.
But unable to create blank flash from it. So i request to all of you if you may create a blank flash file from it.here the link
https://drive.google.com/file/d/1KC0nhQqE6XG2jkCrlkGcqkEuLVvxXeUt/view?usp=drivesdk
aditya.addi said:
Hi friends, I somehow hard bricked my moto x force (xt1580).
To fix it I just need a file called loader.img. that may be dump from a working moto x force using the following command
dd if=/dev/block/mmcblk0 of=/sdcard/Loader.img bs=1024 count=168960
In fastboot mode.
So if anyone may help then I would be highly thankful to him:
Click to expand...
Click to collapse
You should be able to flash from scratch. I bricked my previous XT1580 as well, but was able to get it back up and running (why I love Moto).
Restart in bootloader mode, and go through the flashing process. Use RETEU 5.1. This is the only stock ROM I've been able to reliably flash on the XT1580. Afterwards, you can OTA update to 6.0, install TWRP, then use TWRP to flash L!TE 7.0 ROM. This is the best ROM, bar none.
L!TE is the best option for 7.0 dual SIM functionality on all versions. On the XT1580, the second SIM will only work in 2G. Regardless of if this'll be useful to you (2G availability), this ROM is the best. Stock 7.0 slowed down my charging speed. This ROM boosted it back up to 9V/4A.
For the XT1581, best course of action action is to flash RETMXDS 6.0, flash TWRP, then flash L!TE, using TWRP.
Good luck, and let us know how it goes.
Restart in bootloader mode, and go through the flashing process. Use RETEU 5.1. This is the only stock ROM I've been able to reliably flash on the XT1580. Afterwards, you can OTA update to 6.0, install TWRP, then use TWRP to flash L!TE 7.0
Let you made remember bro my device get HARD bricked
So i am unable to boot into bootloader
Pls provide any other solutions
aditya.addi said:
Restart in bootloader mode, and go through the flashing process. Use RETEU 5.1. This is the only stock ROM I've been able to reliably flash on the XT1580. Afterwards, you can OTA update to 6.0, install TWRP, then use TWRP to flash L!TE 7.0
Let you made remember bro my device get HARD bricked
So i am unable to boot into bootloader
Pls provide any other solutions
Click to expand...
Click to collapse
Please describe what you mean by hard bricked in this instance. What shows up when you power on?
The bootloader screen should work even of the entire phone storage is wiped.
Are you able to get into TWRP?
guptapunjabi said:
Please describe what you mean by hard bricked in this instance. What shows up when you power on?
The bootloader screen should work even of the entire phone storage is wiped.
Are you able to get into TWRP?
Click to expand...
Click to collapse
It's a brick - same as mine one.
Once connected to the PC it shows qualcomm hs-usb qdloader 9008 in device manager.
It can't boot to the bootloader
TeddyBeers said:
It's a brick - same as mine one.
Once connected to the PC it shows qualcomm hs-usb qdloader 9008 in device manager.
It can't boot to the bootloader
Click to expand...
Click to collapse
I completely misunderstood, gentlemen. If this is the case, it is a cluster of a problem that's beyond my knowledge.
Hopefully, someone else may be able to give suggestions.
i have some files (blankflash) for xt1580 x force msm8994....
if someone is interested please pm me or write me on telegram @Francko76
Telegran
Cual es su telegram así lo contacto?
please friends help for the XT1580
---------- Post added at 06:27 PM ---------- Previous post was at 06:23 PM ----------
QTeknology said:
i have some files (blankflash) for xt1580 x force msm8994....
if someone is interested please pm me or write me on telegram @Francko76
Click to expand...
Click to collapse
friend can you help me with the files to make tests ami mail [email protected]
I need help
Help!!
QTeknology said:
i have some files (blankflash) for xt1580 x force msm8994....
if someone is interested please pm me or write me on telegram @Francko76
Click to expand...
Click to collapse
Help me I'm also with Hard brick prpblemas in my Moto X force 1580 ... you could send Flash Blank to my email ... please [email protected] :chorando: :chorando:
Hard Brick Solution
Hi bro
My moto x force is Dead.
and after connect to pc show qualcom......
i search all of content in site but not found any things
Please help me & other moto lovers to re enable my device
So, i've unlocked the bootloader of the device with the steps that berkantkz posted in this forum. I've followed every step with caution, but when tried to flash the file attached to the thread of the unlocking, an error appeared. Triying to boot on the phone it stayed stuck on the boot logo
And to make the situation even worst, I tried to flash other ROM in the phone (to try to fix the problem) and now the phone don't even power on. The only thing that the phone does it's that a PC detects the phone when I conect it. I've tried the SP Flash Tool, but I've searched the entire internet and I don't find the original firmware of this phone.
Somebody can help me? Or if someone know where to get the original firmware to flash in the SP Flash Tool
Or if the only utility of the phone will be stay as a brick in a house wall
Download recovery image from this link and boot image from this link and flash them appropriately. It must come back to life then.
Addition: These images are not extracted by me. They were somehow obtained by @tormenta1026 on Telegram. Each thanks goes to him.
berkantkz said:
Download recovery image from this link and boot image from this link and flash them appropriately. It must come back to life then.
Addition: These images are not extracted by me. They were somehow obtained by @tormenta1026 on Telegram. Each thanks goes to him.
Click to expand...
Click to collapse
hello sir.
i need LG X240K Scatter File ...
please help me
This should work for you @meth raily
berkantkz said:
Download recovery image from this link and boot image from this link and flash them appropriately. It must come back to life then.
Addition: These images are not extracted by me. They were somehow obtained by @tormenta1026 on Telegram. Each thanks goes to him.
Click to expand...
Click to collapse
Hi. Didn't try it out. Had to sell the phone in the time, but thanks for the reply
RedSpikeJr said:
Hi. Didn't try it out. Had to sell the phone in the time, but thanks for the reply
Click to expand...
Click to collapse
this is so overdue hahah.
you are welcome.