Database Users

MS2 reboot only in Bootloader!

Hello,
I have a big problem. I misplaced my MS2 with a customrom Droid 2 installed. after which the phone is stuck at Moto logo, I wanted to flash it with RSD Lite again. But unfortunately it has made ​​all the worse. The screen then remained always black. By accident I found out that the master is always handy in the bootloader if I make the battery clean. the RSD Lite detects it again and then when I want to flash an SBF file he does it without problems. only then if he should make a reboot it ends up back in the bootloader. but i can´t see the bootloader. I know not what to do yet.
can anyone help me?
thank you
greeting

I didn't get quite right the situation but tell me which sbf are you using?
Is it the same android version that was before?
Have you tried pulling off the battery, waited 10 seconds, hold vol + and vol - (or X and arrow up, depending on android version) and powering up to enter the recovery and do a full data wipe? Does it starts normally after that?

Yes, it is the same as before sbf. I've been on it before GB and GB have also flashed.
at the first flash of sbf I'm also in the recovery menu and have a full wipe made ​​but which has unfortunately not have shown anything.
I thought that maybe Customrom a different bootloader has been on it so I downloaded the 70.13 bootloader and flashed.
Since then I have the problem that it only comes into the bootloader, and here again but I have only a black screen.
greeting

sir my advice is redownload your SBF.. maybe it got corrupted. and make sure you choose the right SBF.

devilbatghost said:
sir my advice is redownload your SBF.. maybe it got corrupted. and make sure you choose the right SBF.
Click to expand...
Click to collapse
hi Devilbatghost,
i redownload the SBF and its the right SBF.
i send it to Moto to fix it.
thanks for all.
greet

Original Milestone 2 SBF files
Can someone please tell me where I can get these original SBF files for my M2? I want to go back to the stock ROM for my phone.

Here:
http://and-developers.com/sbf:milestone2

the links for the sbf files are dead.

yes
those links are dead.
does anyone know of an alternate location for the sbf files?

xsghost said:
those links are dead.
does anyone know of an alternate location for the sbf files?
Click to expand...
Click to collapse
Check here for the name of the file you want to download
http://and-developers.com/sbf:milestone2
And download from here the ROM you want
http://sbf.system-ready.org/umts_milestone2/

I have trouble getting the sbf file too, all the links given are dead and i cant reach it from anywhere else, would anyone be kind enough to share the UK 2.2 sbf file?

http://sbf.droid-developers.org/umts_milestone2/list.php
Sent from my A953 using XDA

Unroot Motorola Defy Plus

Hello Everyone,
I recently rooted my defy plus having BL7 using the method provided in this forum - http://forum.xda-developers.com/showthread.php?p=24743292#post24743292. I installed the CM9-NIGHTLY-120626-Defy+ ROM in my device, everything is working fine (I have attached the screenshot of my phone details). Now, I am having problem with my accessories, since the phone is in warranty I have to give my phone to service center. However, I am not able to find the proper method for unrooting the phone again and installing the official firmware which is provided by Motorola in India.
Please guys help me, warranty is getting expired on 10th August. So, I need to replace the defective accessories.

There is no known method to unroot BL7 firmware. You need to flash the SBF again. Check out the development section for detailed information on flashing SBF files and links.

Thank You for replying. I have searched a lot, but so far I was able to find only this -
http://sbf.droid-developers.org/umts_jordanplus/list.php
http://forum.xda-developers.com/showthread.php?t=1093352
I don't know what to use.

Well, if you were having BL7, the firmware should have been 4.5.1-134-DFP-231. Do you remember the exact firmware version? For my Defy+ it was 4.5.1-134_DFP-1321 AsiaRetail http://forum.xda-developers.com/showthread.php?t=1386942 which was BL6.
I would suggest not to go ahead flashing SBF to just avail warranty of accessories as flashing SBF is quite risky and can result in bricking of phone.

yes, it was 4.5.1-134-DFP-231.

There would have been something beyond the version number too. Like for me it was AsiaRetail.en

[A]
I did come across a SBF that is rootable.
This worked like a charm for my Defy+ Red Lens
http://forum.xda-developers.com/showthread.php?t=1542956
Let me know how it goes.
Andy
addictedboy said:
Hello Everyone,
I recently rooted my defy plus having BL7 using the method provided in this forum - http://forum.xda-developers.com/showthread.php?p=24743292#post24743292. I installed the CM9-NIGHTLY-120626-Defy+ ROM in my device, everything is working fine (I have attached the screenshot of my phone details). Now, I am having problem with my accessories, since the phone is in warranty I have to give my phone to service center. However, I am not able to find the proper method for unrooting the phone again and installing the official firmware which is provided by Motorola in India.
Please guys help me, warranty is getting expired on 10th August. So, I need to replace the defective accessories.
Click to expand...
Click to collapse

I don't remember it exactly was it was, but is their any problem in installing asia retail version. I have doubt, either it was [email protected](something like that) or asia retail.
@anandcs - thank you for providing the link. Is it OK to give the mobile phone to service center with that ROM installed?

The problem is you need to flash the exact ROM which was preloaded with the phone. In the SBF links above, there are no Asia Retail versions available for firmware 4.5.1-134-DFP-231.

So, how can I get the asia retail version for the defy plus?

Can I use the asia retail sbf file from this post? Is this sbf official stock rom provided by Motorola?
http://forum.xda-developers.com/showthread.php?t=1495099

Yes that should be good I guess.

I successfully flashed my phone using the sbf provided in that forum. Now the phone look like as it was when I purchased it first.

OK this is the tricky part. There are two firmwares (SBF's) in that post. If you plan to give the phone to a service center then flash only the first one. The other SBF is a root able one.
From my personal experience your phone should be as good as new with the first SBF flash.
Let me know how it goes.
Sent from my MB526 using Tapatalk 2

Saw your post later Adictedboy. Glad your problem is fixed
Sent from my MB526 using Tapatalk 2

Unrooting
addictedboy said:
Can I use the asia retail sbf file from this post? Is this sbf official stock rom provided by Motorola?
http://forum.xda-developers.com/showthread.php?t=1495099
Click to expand...
Click to collapse
Hello
Did you flash the sbf file whose link is given by you in your above post to take your phone back to stock? Did it work successfully and were you able to claim warranty on your device?
The reason I am asking is , I tried to root my phone yesterday and it looks like something has gone wrong in the rooting. While the phone is not bricked it is not able to connect to the network on a 2g selection in the "Wireless&Netowrk --> Mobile Network-->Select Network" selection. It only works if the selection is changed to Automatic. The details of my device are:
Build # 4.5.1-134_DFP-231 & Android ver 2.3.6
Before rooting I had checked the sbf file name in my device and it was the same as in this file name.
Now if you can confirm it worked successfully for you I will use it to unroot my phone.If you can please list the exact process you followed while going back to stock it will be very helpful for everyone from India who gets into trouble with this device and this sbf and build.
Thanks

aCs_ND said:
Hello
Did you flash the sbf file whose link is given by you in your above post to take your phone back to stock? Did it work successfully and were you able to claim warranty on your device?
The reason I am asking is , I tried to root my phone yesterday and it looks like something has gone wrong in the rooting. While the phone is not bricked it is not able to connect to the network on a 2g selection in the "Wireless&Netowrk --> Mobile Network-->Select Network" selection. It only works if the selection is changed to Automatic. The details of my device are:
Build # 4.5.1-134_DFP-231 & Android ver 2.3.6
Before rooting I had checked the sbf file name in my device and it was the same as in this file name.
Now if you can confirm it worked successfully for you I will use it to unroot my phone.If you can please list the exact process you followed while going back to stock it will be very helpful for everyone from India who gets into trouble with this device and this sbf and build.
Thanks
Click to expand...
Click to collapse
Yeah, it was successful, I faced no problem while doing that. However, I didn't went to the service center since it is not located in my city and the problem was not too big, it was just a headphone issue.

Unrooting
addictedboy said:
Yeah, it was successful, I faced no problem while doing that. However, I didn't went to the service center since it is not located in my city and the problem was not too big, it was just a headphone issue.
Click to expand...
Click to collapse
Thanks for responding. This is very good news, for me atleast.
So the sbf file is the correct one. That is a very big relief.
Can you please correct the procedure to be followed from the list below:
Step1=Boot into factory data reset ---> Wipe Data & Wipe Cache -- Is this required? If yes does this need to be done once or twice?
Step2=Open RSDLite
Step3=Boot in to Bootloader
Step4=Connect Phone to PC via USB
Step 5= Flash SBF through RSDLite
ps: Does the phone need to have USB debugging activated in Applications-->Development-->USB Debugging?
If any of the steps is incorrect or not required just correct the procedure for me.
Thanks.

aCs_ND said:
Thanks for responding. This is very good news, for me atleast.
So the sbf file is the correct one. That is a very big relief.
Can you please correct the procedure to be followed from the list below:
Step1=Boot into factory data reset ---> Wipe Data & Wipe Cache -- Is this required? If yes does this need to be done once or twice?
Step2=Open RSDLite
Step3=Boot in to Bootloader
Step4=Connect Phone to PC via USB
Step 5= Flash SBF through RSDLite
ps: Does the phone need to have USB debugging activated in Applications-->Development-->USB Debugging?
If any of the steps is incorrect or not required just correct the procedure for me.
Thanks.
Click to expand...
Click to collapse
Yeah you can go ahead, I also did the same. First I wiped data and cache and then I wiped cache only, so as to ensure that everything has been wiped. I do not have much idea about USB debugging if it is necessary to enable it or not, since after wiping the data and cache, phone is automatically put in to the factory reset mode and I don't think USB debugging is turned ON by default. However, in my case before wiping the cache and putting it into the recovery mode USB debugging was enabled.

[Q] Proplem With Motorola Flipside (Froyo)

I recently got a Flipside abroad from ebay and its an AT&T One, I don't have warranty
It was Working nice with some proplems like the touch freezes and apps stop working frequently but it was OK
my cell don't read arabic so i searched how to add the arabic reading and found one, i had to input framework.jar and another root file, run an cmd, and then copy the produced .zip to sd to flash it after renaming it update.zip
The Flash failed and then i had to use the manual way they mentioned about copying outputed files into framework and lib folders
My Device is rooted and I used adbd insecure to give Android Commander permission to access root from PC
i exchanged files and rebooted as mentioned, and That's The Proplem, The Phone Skips At The MOTO LOGO and that is always followed by an AT&T animation then it starts, but the phone is freezed at the Moto Logo, and i tried removing/placing battery, let it to empty charge then charge it
And to restore factory settings through the Recovery mode but the same problem occurs
PLEASE HELP QUICKLY! as i Cannot Use my phone, Its Android 2.2.2 Froyo

yosry93 said:
I recently got a Flipside abroad from ebay and its an AT&T One, I don't have warranty
It was Working nice with some proplems like the touch freezes and apps stop working frequently but it was OK
my cell don't read arabic so i searched how to add the arabic reading and found one, i had to input framework.jar and another root file, run an cmd, and then copy the produced .zip to sd to flash it after renaming it update.zip
The Flash failed and then i had to use the manual way they mentioned about copying outputed files into framework and lib folders
My Device is rooted and I used adbd insecure to give Android Commander permission to access root from PC
i exchanged files and rebooted as mentioned, and That's The Proplem, The Phone Skips At The MOTO LOGO and that is always followed by an AT&T animation then it starts, but the phone is freezed at the Moto Logo, and i tried removing/placing battery, let it to empty charge then charge it
And to restore factory settings through the Recovery mode but the same problem occurs
PLEASE HELP QUICKLY! as i Cannot Use my phone, Its Android 2.2.2 Froyo
Click to expand...
Click to collapse
Reflash stock sbf with rsd is my only suggestion. Here's the stock sbf
http://db.tt/H2RuCD8h

What?
pre4speed said:
Reflash stock sbf with rsd is my only suggestion. Here's the stock sbf
Click to expand...
Click to collapse
Sorry it may look like i'm a noob, but what is "Stock Sbf with rsd" ??

I done it with another sbf and success but now i'm stuch in that stupid bootloader , can you tell me how to get into the stock recovery from my flipside to wipe/data? as i cannot get of that bootloader

yosry93 said:
I done it with another sbf and success but now i'm stuch in that stupid bootloader , can you tell me how to get into the stock recovery from my flipside to wipe/data? as i cannot get of that bootloader
Click to expand...
Click to collapse
after flashing sbf file, no need to wipe data, if you stuck at some where, reflash the sbf file.

phapsubongtoi said:
after flashing sbf file, no need to wipe data, if you stuck at some where, reflash the sbf file.
Click to expand...
Click to collapse
I reflashed it 3 times , Still stucked on that Bootloader !!

yosry93 said:
I reflashed it 3 times , Still stucked on that Bootloader !!
Click to expand...
Click to collapse
Prolly need the bootloader for froyo as well. Sorry shoulda gave you that too.
Flash bootloader first then the sbf. All done via rsd
Froyo bootloader http://db.tt/FuXac7kG

Seems to be my falt
pre4speed said:
Prolly need the bootloader for froyo as well. Sorry shoulda gave you that too.
Flash bootloader first then the sbf. All done via rsd
Froyo bootloader
Click to expand...
Click to collapse
Ok i flashed it . and flashed the sbf i'm using agian
SAGE_U3_10.23.20_SIGNATT_USASAGE02B25ND0ATTNA02E.0R_PDS001_SAGEATT_P033_HWp4_1FF.sbf
but the same problem, should i use the SBF u told me about or any other??
The SBF i used is also for Flipside, the rsd says successful, and PASS is the result but still stacked in that Bootloader whatever i rebooted using power button or replaced the battery, known that i cannot open Recovery (X+Power Button) to wipe data

Thank You
Thank You very much body, i used the SBF you gave me and it worked well, my phine is now working again
Thank Youuu

yosry93 said:
Thank You very much body, i used the SBF you gave me and it worked well, my phine is now working again
Thank Youuu
Click to expand...
Click to collapse
You are quite welcome. Been so long since I've used or looked at my flopside (no typo lol) that I had forgotten froyo needed the updated bootloader first. Glad its working again.

[Q] Stock .sbf file for Milestone 2 - where?

I seem to have 'bricked' my Milestone 2 whan an update to CM11 went wrong somehow.
In another thread I catalogue my experiments and research with respect to fixing it.
Because I think that I have access only to the standard recovery, I believe that my first step has to be the installation of a Motorola .sbf file to restore it to factory state. As I understand it, the only thing I can install is an sbf signed by Motorola.
If I get the phone working at all, I think I can install clockworkmod or TeamWin and then recover an earlier nandroid backup.
Can anyone point me to a standard Motorola .sbf for the Milestone 2?
All the links that I have found seem to be dead. My phone is only 3 years old!
Thanks in anticipation,
David

More Information
Just to clarify...
On the phone, I can get to the standard recovery by pressing 'X' whilst powering up and then '@'. I think I can install a Motorola signed 'update.zip'.
I can get the phone into a mode to connect to RSD Lite by powering up with the volume and camera buttons pressed, so I can install anything that can be installed that way (.sbf archive signed by Motorola?).
Regards,
David

Latest UK GB ROM. Uploaded to my Google Drive:
https://drive.google.com/file/d/0B2YO6WvcsPlnZ3pLenJucGNCYm8/view?usp=sharing

rabinhood said:
Latest UK GB ROM. Uploaded to my Google Drive:
]
Click to expand...
Click to collapse
Do you have the other versions too, especially a german retail?
Update: I think I found a site from which it's available.

No, unfortunately I have only UK ROMs (Gingerbread, and Froyo). I don't speak German.

rabinhood said:
No, unfortunately I have only UK ROMs (Gingerbread, and Froyo). I don't speak German.
Click to expand...
Click to collapse
No problem. I've found a site with all relevant .sbf files. You just have to search for the exact title of the file, e.g. "MILS2_U6_4.1-22_SIGNED_UCAMILESTONE2B1B80E1014.0R_UCXMILE2GBQWRTGB_P016_A006_HWp2a_Service1FF"

Motorola Moto X Play hard bricked after OTA

Hi there. I was on stock firmware when the OTA came. I did not installed for a while but when I did my phone went completely dead. I cannot boot into the bootloader nor the recovery. I cannot get fastboot to work. The only hope I have is when I connect it to Windows PC it recognizes it as Qualcomm HS-USB QDLoader 9008 (COM 3). After some research I found that I can do a blankflash, but i cannot find any blankflash files for my phone. So my question is - Is there any way to generate singleimage.bin (for blankflash) or any other way to recover it? Thank you!

Got the same problem. until now no blankflash files available, i guess. Only way is by jtag box. i tried with loader.img for moto x style but it doesnt work for moto x play.

I have the same problem, no blankflash files available until now?

alfafc said:
I have the same problem, no blankflash files available until now?
Click to expand...
Click to collapse
No...

I also have hard brick my phone. I want to get it fixed from this site, is this repair site legit : https://www.aryk.tech/2017/11/moto-x-play-unbrick-solutions.html?m=1

Cooro said:
I also have hard brick my phone. I want to get it fixed from this site, is this repair site legit : https://www.aryk.tech/2017/11/moto-x-play-unbrick-solutions.html?m=1
Click to expand...
Click to collapse
They are frauds.. Many have paid them and got screwed up.. Only way is to do Jtag Flashing or to change the Mother Board (much expensive)

No it is not legit I already got the files from them try my files and tell me if it works for you...also upload it in the global form if working

alwyn naresh said:
No it is not legit I already got the files from them try my files and tell me if it works for you...also upload it in the global form if working
Click to expand...
Click to collapse
It won't work for sure.. The whole project was sponsored by a guy in Hard bricked Moto X Play telegram group created by us.. The only way to fix it is Jtag flashing.. It may cost you around INR 1000.

How to approach jtag?

alwyn naresh said:
How to approach jtag?
Click to expand...
Click to collapse
Below is the address and contact no.. Call him and courier the device.
OMKAR SHINDE
Address
Shop No.2, Shree Datta Apts, Opposite Bramha Garden,
Near Veer Tanaji Ganpati Mandir,
Manikbaug, Pune - 411 051.
Mobile- +919850152245
[email protected]

Thank you so much. It is safe right.they will return the mobile right? Also I got all the unbrick files from ark but none is working any ideas on that? I got qfil files then blank flash files then loader file ...if I send the file to you do you think you can check them for me to see if it works....

alwyn naresh said:
Thank you so much. It is safe right.they will return the mobile right? Also I got all the unbrick files from ark but none is working any ideas on that? I got qfil files then blank flash files then loader file ...if I send the file to you do you think you can check them for me to see if it works....
Click to expand...
Click to collapse
I myself got it fixed from there.. He had fixed more than 200 devices by now.. He even receives devices from abroad.

Thank you very much sir.

alwyn naresh said:
Thank you very much sir.
Click to expand...
Click to collapse
You're welcome buddy.. Just don't waste time on blank flash files.. It just won't work as it isn't digitally signed by Motorola.. Get it fixed from Pune.. That's the only possible solution as of now.. Else you'll have to change the Mother Board..

Hello, after restoring the official firmware and working perfectly the phone, an OTA update appeared, small, I gave it to install as other times ... and from that moment the phone with the black screen.
It seems I'm not the only one, is there any way to revive it?

loparaan said:
Hello, after restoring the official firmware and working perfectly the phone, an OTA update appeared, small, I gave it to install as other times ... and from that moment the phone with the black screen.
It seems I'm not the only one, is there any way to revive it?
Click to expand...
Click to collapse
My daughters has just now done this, no lights, no boot, nothing
Anyway to fix it?

robneymcplum said:
My daughters has just now done this, no lights, no boot, nothing
Anyway to fix it?
Click to expand...
Click to collapse
There is nothing to do ... send it to Motorola and pay the settlement, which is not worth it, they asked me € 195 (according to them, you had to change the motherboard) ... so thrown away.
If it had been to mess with him, but after an official OTA. Never again Motorola.

loparaan said:
There is nothing to do ... send it to Motorola and pay the settlement, which is not worth it, they asked me € 195 (according to them, you had to change the motherboard) ... so thrown away.
If it had been to mess with him, but after an official OTA. Never again Motorola.
Click to expand...
Click to collapse
Jeez... I'm glad it happened when she was using it as a spare phone than me when it was my main phone! Thats a definite NEVER buying a motorola again, even if it was cheap at the time.

My Moto x play completely dead
My moto x play completely not working, I can't able to charge or switch Mobile.
I tried all flashmde or different types of to install., but my mobile was not detected.
But when I connect pc, its showing only Qualcomm name.
Also I tried qflash mode, mobile detecting Qualcomm connected details in my pc but its expecting content or stream file type of firmware stock file.
Can you assist any one where we can get moto x play qflash support file.
Thanks,
Rajesh Kumar R
9962038582