Hey, quick question. Is anyone else's spring terminal in the bottom-right-most corner too low to make contact with the back? Mine is and my gps seems a little inaccurate compared with other phones ive had in the past. Just wondering if this could be it.
There's lot of them. Bend then slightly up with a plastic knife something. Took my galaxy note 4 apart and did same thing to all the contacts. Got improved reception and GPS working again.
Yeah, I probed a little with a little pick tool but they're so small I need something even tinier like a sewing needle. And it looks like ill have better luck if I remove the back shell as there isnt much room to get at it as is. It is so low I wondered if it was intentional. Hence the reason I asked on here. When I look across the edge of the phone I can see the others peek above the plastic but this one shows nothing. Hope that makes sense, it is an awkward visual to describe.
I'm disappointed that I even have to consider opening my brand new expensive phone. But I also
dont want to fork over $20 to Tmobile to swap it. I've owned the G2 and the G5 before this and both of them had faults requiring replacement as well.
Mine is too, leave it
Hmm...strange. I just tested mine without my case or the battery cover, and my GPS locked on faster and better than it ever has since getting this phone. Seeing how recessed that connector is, I'd have to say it was intentional, though I'm not sure why it was made that way since there is a contact pad on the battery cover in that spot. I'm going to have to agree with wing_addict_usa, and say leave it as it is.
My gps sucks with just a simple plastic case on the phone. It goes bonkers. I swear it's the gyro/compass thing in the phone.
Did you calibrate it? And I didn't lay it on the camera lens. Just a flat surface with camera lens hanging off the edge.
Thanks for the replies, glad to know my spring comtact is normal. At least I can look elsewhere for the cause.
I've done the figure 8 calibration while in Google maps with no change. Using the "GPS Test" app it was struggling to stay under 35ft of accuracy.
The problem seems to be a little inconsistent though. After posting I was able to eventually get between 15 and 20 feet of accuracy. I wonder if it is emf noise while data polling or noise while charging that could be interfering with the reception of gps signal.
The poor reception occurred with my phone on a magnetic holder attached to my windshield driving on interstate highway. Other phones of mine normally get pretty good signal in that situation.
Ill keep an eye on it and post any new findings but for now I'm kinda stumped. GPS worked fine up until the day of my posting.
To be honest, I completely forgot about calibrating the GPS. It has been so long since I've had to do it since my last few phones had great GPS radios, and were accurate out of the box. I calibrated mine last night after having to look up how to do it again, and it seemed better this morning. Still not as accurate as the M8 I upgraded from, but now it's not all over the place like it was.
How do you calibrate it?
Just an update to my situation. I seem to be getting better reception now but not as good as my alcatel idol 3 5.5" . I can get down to 15ft of accuracy on the v20 and 10 ft accuracy on Idol 3 in same location.
Btw, The GPS antenna is located in the top plastic piece which has metal tabs that make contact with more of those metal springs. I removed mine and put it back on to see if I could get a better connection. It seemed pretty snug though and not much chance for a weak connection.
I'm not totally convinced that was the issue but I'm happy for now as the navigation seems to be more reliable.
Oh and the calibration is not the gps but the gyros so that the maps orientate correctly to the position your phone is in. Its done by moving the phone in a figure 8 pattern. There is also a leveling calibration in the menu somewhere that has you set the phone on known level surface and then press calibrate to zero the level to the phones position.
The figure 8 is the one I was referring to though and now that I think of it, not much use for GPS reception.
Related
Alright, I might as well prove mods don't know it all. I'm thinking about purchasing a new Vogue and going with Sprint. I've got a few questions here.
1) I think I've gathered that GPS capability is on this phone...it just has to be activated with proper settings or a new ROM. Will someone set me straight on this?
2) What are your thoughts on battery life?
3) What are your thoughts on call reception and service?
4) How is the build quality?
Radio Shack is getting rid of the last ones for $19.95 w/a new contract. Though I don't like the idea of getting an older phone (I've had a Wizard for 3 years now) I love the form factor and as long as XDA is around and these things are upgradable, I'll probably enjoy it.
Dang, this board is dead...I guess we'll just have to close it up, hehehe.
1) The Vogue DOES have GPS capability, it will work with or without a data connection.
2) My Vogue's battery life usually runs a whole day (24 hrs) with heavy usage, with light usage it runs about 2 days-2.5 days...
3) In my area its pretty good reception, and I commute to my school, which is 25 miles away, and I get really good reception in that area
4) I think the build quality is really good. I've dropped the phone on concrete more than twice, and pretty hard too, and the only thing that happened was the case came off, and the battery as well, but its just like legos, put it back together, other than that just minor scratches...
I recommend a screen protector
Hope that helped! Didint wanna leave you hanging lol
Thanks for the response. Though I'd like get a Touch Pro, I'd rather have a device that won't cost an arm and a leg with most of the capability.
I believe sprint recently removed the touch from their site. Hope you can find one locally!
I just got my Vogue from US Cellular in December. I'm located in a rural part of Iowa. I have activated the GPS, and it normally connects very quickly. I bought it knowing the GPS was not activated, and was not sure if it would be possible, so this was a definite bonus for me.
Battery life is generally pretty good, about what manifest said, although steady web surfing will drain it pretty quickly. I drained the battery in a couple of hours one day when I was with family members who were shopping and I was accessing information on the web and writing a sermon and a newsletter column. (I'm a minister.)
I've been very pleased with the call reception. I'm not on the Sprint system, but the call quality is very good. USC is supposed to be rolling out evdo in my area later this year (fingers crossed), and even without it most web sites load pretty quickly, and when I am in ev areas it loads like my broadband at home.
The vogue seems to be very solid. I've dropped it a few times, and I didn't even have to put the battery back in. Soon after I got it, I bought an aluminum case for it. Black. Until I open it up, people think its just the black phone. My wife has picked it up and wondered why tapping on the screen doesn't do anything, until she realizes its the window on the case. It's the least bulky option for a case I have seen, it protects the phone well, and it keeps buttons and the screen from being pushed when I don't intend to. The downside is that it drops reception by a bar when the cover is closed. I still seldom miss a call.
jwzg said:
Alright, I might as well prove mods don't know it all. I'm thinking about purchasing a new Vogue and going with Sprint. I've got a few questions here.
1) I think I've gathered that GPS capability is on this phone...it just has to be activated with proper settings or a new ROM. Will someone set me straight on this?
2) What are your thoughts on battery life?
3) What are your thoughts on call reception and service?
4) How is the build quality?
Radio Shack is getting rid of the last ones for $19.95 w/a new contract. Though I don't like the idea of getting an older phone (I've had a Wizard for 3 years now) I love the form factor and as long as XDA is around and these things are upgradable, I'll probably enjoy it.
Click to expand...
Click to collapse
GPS is activated on the phone with WM 6.1, so that should not be an issue for you.
Battery life will vary wildly depending on your location. At home my reception is 1xRTT and battery will drian pretty fast. At work I have EvDO and battery life will nearly double. I can web surf, email, listen 8 hours to music over bluetooth stereo all at work, and make a call or two at home in the evening with no problem. However, I did invest in a larger battery from Seidio. Yes it makes the phone 4 mm thicker, but I've actually come to like the slightly thicker size. Seems a bit easier to handle and to finger touch the screen more accurately.
Call reception has been great in both the city and at home. There is one dead spot on the way to work, but I car pool with two others who each have different carriers, and it appears to be a dead spot for everyone. If you need to call customer support, it's generally a pleasure. I've yet to reach someone whose first language is not English. Yes, they have to go through their standard troubleshooting script, but if you are pleasant to them they are pleasant back, and they do seem knowledgeable. I tend to call support on the weekends or early mornings, and have never waited more than 3 minutes to get a live person on the phone.
The phone is sturdy, feels solid, even with my new battery cover, which leaves a slightly hollow space in much of the back. Dropped it a few times with no ill effects.
I would say take advantage of the deal.
I actually bought two new Vogues from from RadioTrash, upgrading from a couple of 3 year old Sanyo MM-8300 flip phones. At first, I was a little worried about some things on the Vogues:
The reception in my rural area of Missouri was horrible compared to the older Sanyo phones; 0-1 bar compared to 3-4 bars.
My battery life wasn't anywhere near what the earlier poster said. After multiple charges, I was lucky to get 6 hours of standby time on a full charge (and thats with screen off most of the time).
I wasn't really figuring out the purpose of the big silver button at the bottom with the square four-direction action ring. I am still not sure of the best way to use this, yet it looks very important being so big and obvious on the front of the phone.
Right before I was about ready to take the phones back, I received some expert help from some of the users here and loaded the same PRL that I had on my Sanyo phone into the Vogue phone and Wow! Now the Vogue is getting 3-4 bars in the basement of my rural home.
Next, I bought a Mugen Power 2400 mAh extended battery on-line for 70 bucks (shipped) from nakedcellphones.com and Wow again! Now I get over a week in standby or at least 8 hours talk time. The battery came with a new back cover (humpless type) to accomodate the thicker battery which was very well mathed to the original. The increased thickness of the phone is actually a better feel in my hands and I prefer it over the thinner OEM.
Next I went to a local Verizon store to get a new leather case to accomodate the thicker phone. This was at the recommendation of another user here, and even though this is a Sprint phone, they assisted me in finding the coolest case that I'm very happy with (26 bucks out the door)
Finally, I ordered a fantastic screen protector which is probably the best you can buy in terms of feel, durability, scratch resistance, viewability, and touch screen sensitivity. Paid 15 bucks (shipped), enough to do four phones at photodon.com
Then I loaded the coolest ROM called DHarvey's Black Vista and I couldn't be happier with the way everything works (free).
Overall, I have to say that I am impressed with the build quality of these phones. Nothing really to break. But in all my wild on-line searches, I came across this Chinese site that sells all the OEM parts for this phone cheap should I need to replace something like a screen, a switch, a button, etc.
So in all here is the tally:
Phone: ........ $20
Battery: ........ 70
Case: ............ 26
Screen Film: ... 4
ROM .............. -0-
Total ........... $120
I am not at all dissapointed in what I have spent considering the performance, style, and quality that I now have. And its still less than I paid for the Sanyo phones when they were new ($149).
Ok, so I got my N1 last week, and I absolutely love it. Two problems, though. The bottom half of the back of the case is loose enough to fit a fingernail in, far enough to always be feelable but not seen, and the other is that the top right of my screen makes a sound not dissimilar to cellophane being scrunched some of the time.
The problems are barely there, the crunch can only be heard at medium high pressure from less than 6 inches away, but do you all thank that these can escalate enough that I would regret not going for the new replacement route within the 15 days?
Sounds like you may have gotten a bad one, mine is rock solid.
about that sound your screen is making; could be something to do with the adhesive. People blow dry it with hot air and then press for 5 min.
I decided that since I have the disapearing signal far worse than most people here (-75dBm to -110dBm/completely lost signal in 10 seconds...) I called them up and they're allowing replacement. Hopefully it goes without a hitch...
--
thats how mine is but in the bottom. not a big deal but i did feel it
several people reported the same thing before. screen not flush all the way around. there's no adhesive, the screen slides out of the outer sleeve if you remove the screws in back.
Oh...
--
mine does it on the bottom.
it feels like there is a slight gap in between the bottom bezel and the screen.
It's not a problem at all, but it sure is annoying at times.
On the left side of my HD2 the screen is easier to push in at the top and bottom, but it takes a lot of pressure to make it "squeak".
If I had a cosmetic issue, you can bet I would be on a waiting list to get a replacement. The looks on these phones are nearly as important as the performance, IMHO.
oh i deff agree, @op, if you only just got it id be trying to take it back.
Same on mine at the bottom - just barely - if you slightly press between the usb and headphone jack you hear a slight (guess it sounds like) a click and you feel it slightly move. When the usb jack is plugged in it stops Some play and I don't think its worth returning - also don't think it will get worse. Case materials should have been a little more rigid. Think if you get a hard shell case or aluminum skin - when they become available you won't notice it. Talking to other guys with the HTC branded Euro version their build quality is a bit better. Think its pretty much the same with all HTC stuff - their branded models (TYTN TYTN II etc.) were build better than the AT&T versions - they also cost a lot more because they aren't subsidized.
Personally feel the HD2 of all the MS phones with the exception of the HTC TYTN I is the most solid. The Fuze which I just got rid of was probably the worst. The case was ok but the front keypad was pure junk - out of the box the thing felt like it was going to break and it never sat "square" in its opening. The USB ports on all of them were really weak and were super loose out of the box. The slide out keyboards always loosened up and had too much play.
stim141 said:
Personally feel the HD2 of all the MS phones with the exception of the HTC TYTN I is the most solid. The Fuze which I just got rid of was probably the worst. The case was ok but the front keypad was pure junk - out of the box the thing felt like it was going to break and it never sat "square" in its opening. The USB ports on all of them were really weak and were super loose out of the box. The slide out keyboards always loosened up and had too much play.
Click to expand...
Click to collapse
For me, the Touch Pro 2 has top honors when it comes to "feeling" solid. My sister dropped it the other day and cracked the bevel, with a large triangle missing near the volume rocker and three other cracks on the bottom, top and opposite side.
I am encouraging her to return it and claim the insurance, but since there is no change in the quality of the phone's operation, she wants to keep it.
Again, for me, the TP2 seems more solid than the HD2, but the HD2 is very well-built compared to other phones. I am so paranoid about even putting my phone down on a hard surface, due to the sharp edges of the camera mount and the light metal case.
I will be installing my new invisibleSHEILD as soon as sirphunkee and I can make the time to meet somewhere clean (I have a 2yo at home ). I imagine my paranoia will drop a bit then...
I dropped my phone while working out at the gym.
I was on the treadmill, and dropped the phone from my hand to the treadmill belt, then it flew out (i was running pretty fast at speed 7) and ended up hitting the wall behind me. Well, I freaked out and ran over to check on the phone.
Even though I had NO protection, the phone was perfectly fine. Only a tiny scratch that's barely visible on the top left bezel, and everything was fine.
I really was surprised at the sturdiness of the phone.
Snarksneeze said:
For me, the Touch Pro 2 has top honors when it comes to "feeling" solid. My sister dropped it the other day and cracked the bevel, with a large triangle missing near the volume rocker and three other cracks on the bottom, top and opposite side.
I am encouraging her to return it and claim the insurance, but since there is no change in the quality of the phone's operation, she wants to keep it.
Again, for me, the TP2 seems more solid than the HD2, but the HD2 is very well-built compared to other phones. I am so paranoid about even putting my phone down on a hard surface, due to the sharp edges of the camera mount and the light metal case.
I will be installing my new invisibleSHEILD as soon as sirphunkee and I can make the time to meet somewhere clean (I have a 2yo at home ). I imagine my paranoia will drop a bit then...
Click to expand...
Click to collapse
My TP2 fell out of my hand in a parking lot, the thing didn't hit hard, but it left a small scratch on the screen (it was visible, but wasn't too obvious) and then some nicks at the corners of the device. It did look used. I returned it to T-Mo (I was still within 14-day remorse period) and used the money I got back to get an HD2 instead (for some reason I didn't qualify for either the full or the 11 month upgrade price, only 50 bucks discount... now that I think about it, I should have gotten it at full price, also, the day after it arrived (ordered online) T-Mo came out with the 2 for 1 smartphone, but alas, a new line was needed and I had no use for it).
I've dropped my HD2 at least 4 times since and there's not a nick on it. I figure the glass screen helps (as opposed to the TP2's plastic), even if it's a finger print magnet. I also have no problems with the screen or bezel being uneven, even after dropping it, nor have I had any single of the problems people complain about, so, go figure, I got the perfect production HD2.
Whew.... OK. Soooo glad to hear this isnt only my device. Mines is on the bottom. I also dont see it getting any worst and its so minor right now its probably not worth the hassle of returning. I tend to keep the gel case on it anyway..
thrashingdeth said:
thats how mine is but in the bottom. not a big deal but i did feel it
Click to expand...
Click to collapse
x2 same as mines.
--
I had an issue with mine creaking, on the bottom. Mainly when I was pressing the start key, or back. Got a replacement and it seems better. For a phone seriously delayed I don't get how the quality is so terrible.
my first hd2 the camera lens started to rattle tmobile replaced it
Tm5078 said:
my first hd2 the camera lens started to rattle tmobile replaced it
Click to expand...
Click to collapse
Was it the camera lens or the casing around the camera?
After watching the tear-down video I could see how the camera casing could be improperly installed and loosen after a bit of handling, but I thought the lens was pretty solid...
--
JWang158 said:
Seriously, this phone is turning out to be pretty half baked.
Click to expand...
Click to collapse
I disagree. Not sure if I got lucky or not, but my phone is in perfect condition despite being a month old and spending most of that time in my back pocket.
I've sat on it countless times, dropped it from my hand to the floor twice and dropped it from the car holder to the console in my vehicle so many times I can't count.
The only problem I have is with the SMS freeze, and I've solved 90% of that by keeping my inbox clean. If I have the money for a class 6 microSD card, I'd bet on having solved the other 10% of my problems.
Since upgrading my radio, I don't have any problems with dropped calls, missing texts, loss of 3G or any of the other popular issues that seem to be plaguing the new owners.
Since bad news always travels faster and wider than good news, one simply can't infer from the issues being discussed here that they are the norm. I would suspect a very small percentage of the HD2 owners frequent the forums here, and of those another small percentage are having hardware issues.
I've been through a few of these new phone releases here in the past and from my experience I would say that this is pretty normal for the first few months of a phone's release. In another month or so there will be a firmware upgrade to fix the freezing and icon switching, then a lot of the issues will switch from hardware to software. Soon after that, I expect everyone will be clamoring for the release of a Windows Phone 7 ROM, followed a few months later by a newer, faster phone that everyone will be switching to. A cycle, vicious but almost predictable.
If you hold the phone in your left hand - just like the iPhone 4's "wrong" grip (your skin presses against the lower left side of the phone) watch reception bars go down 1 or 2 bars. The longer you leave your hand there, the more the bars go down. Release and they are up again. Tried it with and without a case. Same issue.
Just because it happens to HD2 does not necessarily become a problem.
I could also reproduce that on my iPhone 3GS and 3G in some location but not in all locations. I didn't even realise this until people start complaining about iPhone 4. To reduce the signal, i have to grip it (without using a case) very tightly without lettting go for a long time. If I periodically relax my hand as I would in normal usage, then signal won't go down. As this is not the way I normally grip, and the fact that I've been using my phones for so long without even knowing there is a "problem" probably means that I have nothing to worry about.
Then, I searched the youtube and found out that it is also happening to Nokia phones:
http://www.youtube.com/watch?v=gi1gHDa7-X0
http://www.youtube.com/watch?v=yQ7t75Uo6qQ
http://www.youtube.com/watch?v=amPG52DVQuk
http://www.youtube.com/watch?v=2Zsuxbd0L0g
http://www.youtube.com/watch?v=MyLrFY3mI0M
Nokia is trying to fool everyone by saying that users can hold their phones in anyway they want, but this is simply not true. See this:
http://www.appleinsider.com/article...at_iphone_4_death_grip_gets_called_on_it.html
Haven't got an iPhone 4 yet, but my impression is that this issue is more pronounced with it. IMO, although it can be easily fixed by using a case, applying a sticky tape or nail polish over the lower left half of the antenna, Apple would definitely need to address this issue so that out of the box the extent of signal strengh reduction is minimized.
I didn't say it was a problem. I was just shocked to find it out after all this time I had it and never knew. Hence the OMG!
I think the phenomena is likely to exist with every phone, in certain locations, with certain hand type, but owners of the phone may not notice it unless they deliberately test it out. I could only produce that phenomena is one part of my house but not in another. Just like half the iPhone 4 owners were not able to reproduce this problem while about half were able to. My guess is that it has nothing to do with manufacturing defects, but simply a case of the location, orientation, and body type.
There have been discussions about that at the beginning on the HD2. The antenna is in the bottom part of the phone, between the bottom and the start of the metal cover, i.e. where your hand is (as stated in the manual).
The end word is that pretty much every phone on the market will have its reception drop a bit when you hold it.
FCC only allows the antenna to be located at the bottom of the phone, away from the user's brain. Also, the level of signal strengh must not exceed what's allowed. So, even if the manufacturer want to relocate the antenna to the top part of the phone so that user's hand could not touch it so easily, it would not be approved. Simiilary, even if the manufacturer could increase the signal strength, it would not be approved.
eaglesteve said:
Haven't got an iPhone 4 yet, but my impression is that this issue is more pronounced with it. IMO, although it can be easily fixed by using a case, applying a sticky tape or nail polish over the lower left half of the antenna, Apple would definitely need to address this issue so that out of the box the extent of signal strengh reduction is minimized.
Click to expand...
Click to collapse
I heard that the fastest and cheapest way to solve teh Iphone 4 reception problem was to put a condom over it. They are cheaper than the bumper and are available in a varitey of colors and textures. The added plus is that you always have a condom handy should you need one
Classic Apple!
Let HTC and Nokia work tirelessly for years upon years only to one-up them with a bigger shinier version of a feature EVERY smartphone has had since 2003.
Sheesh.
wineds said:
I heard that the fastest and cheapest way to solve teh Iphone 4 reception problem was to put a condom over it. They are cheaper than the bumper and are available in a varitey of colors and textures. The added plus is that you always have a condom handy should you need one
Click to expand...
Click to collapse
Your recommendation would suit youself my friend. I'll use a nice looking case.
Basically every phone has way to hold it which will lower signal strength. With most smartphones it is rather easy. Most phones also have picture in manual how to hold it correctly. It's nothing new.
The HD2 issue your mentioning is a normal reaction to covering an antenna. This SHOULD happen in all phones since you are partially blocking the antena.
The iPhone 4 issue is not similar, if you go through this post:
http://gizmodo.com/5571171/iphone-4-loses-reception-when-you-hold-it-by-the-antenna-band
you'll see that the signal loss is due to connecting the left side of the antenna with the bottom by touching the left side and the bottom (left) portion of the phone. If you put a "Bumper", apple's term for cover, and then hold the iphone in exactly the same way, you will not lose the signal.
omar302 said:
If you put a "Bumper", apple's term for cover, and then hold the iphone in exactly the same way, you will not lose the signal.
Click to expand...
Click to collapse
The thing is I have a black rubberised case around my HD2 and even WITH the case the bars still drop.
tboy2000 said:
The thing is I have a black rubberised case around my HD2 and even WITH the case the bars still drop.
Click to expand...
Click to collapse
as long as you are not brothered, it cannot be called a problem.
tboy2000 said:
The thing is I have a black rubberised case around my HD2 and even WITH the case the bars still drop.
Click to expand...
Click to collapse
Yes, thats because the singal has to go through your hand, so it might lose a bar or two.
All phones get this.
The Iphones problem is not the same thing, it just hast he same result.
if i leave any phone I've ever had in pretty much any spot in my house the signal flutuates.
sod all to do with holding it.
just use a BT headset
anyone cares for some duct tape?
http://www.marketwatch.com/story/apples-latest-conundrum-duct-tape-2010-07-12?dist=countdown
lol... Snapperheads...
If you watch the iphone vid on youtube showing the 'making of' the phone you'll notice the alloy frame is the antenna... Covering it will help not to drop the reception... But having to have a cover to not lose reception is a joke...
As for the HD2, all phones held in a hand will have variance in reception... I tried the left hand thing on mine and it didn't drop a bar...
i have no problem with mine........may be the signal/reception from my carrier is really great unlike that in US.....
LOL good thing i'm not left handed
I have recently purchased a Note 3 (SM-N9005), currently running it rooted with the Polish NB3, unfortunately knox triggered, but never had a faulty phone before, so I hope that continues!
One thing that has been bugging me in an otherwise great phone, is the wifi signal, quite weak to say the least, my Sony Xperia Z is roughly 2 bars stronger in the same place, in fact, so is my Q10 and various mobiles I have collected over time (Xiaomi Mi2s, Pantech 840s), annoying to say the least, tried all the tweaks and settings mentioned here and elsewhere and while they may help some, for me the signal is still very poor.......
Was watching an excellent tear down video here:
When he mentioned making sure the little contacts for the antennas were sufficiently bent upwards to make a good contact, very interesting!
So I carefully popped off the back after taking out all the twelve little screws, and proceeded to gently bend upwards the two connectors for GPS and wifi, I also ever so slightly roughed the silver connector with a fine needle, all done in theory to aid signal.....
As for the results, well, with the same ROM, and no router reboot etc.... the wifi that used to hover at one signal pip, maybe two, now moves between two and three, it even went full bar briefly, which it had never done before from the spot I used! And there are a few more SSID's in the list too
I am now as you would expect, very happy, the wifi still isn't fantastic, but it's a damn sight better now!! :good:
Please don't try this and then blame me if you mess up your phone, I take no responsibility if you do, posted this just because I was quite surprised with the results!
No one the least interested, thought with all the threads about the poor wifi this find may have been of interest? Unless I'm late to the show and this is already been done and dusted
no one is interested because its a high risk low reward scenario.
Happy you had good results, but most people dont want to risk destroying their beloved note for a potential (minute) signal increase.
nakedtime said:
no one is interested because its a high risk low reward scenario.
Happy you had good results, but most people dont want to risk destroying their beloved note for a potential (minute) signal increase.
Click to expand...
Click to collapse
Wouldn't say minute, having SSID's that weren't there before and one to two bars better signal is the exact opposite of that!
As for how difficult it is, unscrewing 12 screws and lifting off the back cover is a piece of cake, in fact you don't even need to remove it, just lift one corner away, watch the first few mins of the video, it's petty simple....
My phone didn't have the warranty sticker over one of the screws either, and the phone was brand new and sealed from the provider, weird
I've never had issues with the signal on my Note 3.
The (admittedly many) times I do get a lousy signal, the fault lies with the provider, not my phone. (I know exactly where each tower is and what its range is. And I'm usually outside of it.)
As for WiFi, once I moved the Router out of the reinforced concrete cupboard, I always get a full signal...
to the OP , very useful thread dont be put off because theres been little responce, like the guy said few would dare to unscrew there beloved Note but still useful to know.
Yeah the 3G and 4G signal seems strong, just poor wifi when compared to multiple phones in the same spot, at least that was the case
I guess I trust my hands more than most, bad flashes are more of a concern for me than a few dozen screws lol
Thanks
I gave my phone for repairs once and the wifi reception has been below par since. Had tried what you have posted before but was not quite sure if I had the wifi pin right. Also I had only tinkered with the raised connector on the board and hadn't roughed up the connector on the back panel like you did.
Well your post gave me some courage and with the help of the video that you linked I tried it. Unfortunately, I broke the connector and that obviously made my problem much worse!
But then out of desperation I thought I would get some common copper wire to try and connect the board with the antenna and it actually worked Looks extremely ugly but my note 3 now connects to wifi routers even better than my note 1. I am attaching screenshots of the two phones with the wifi analyzer app. There is also a picture of the copper wire mesh that i put below the wifi antenna connector on the panel before I put it all back together.
Definitely do not recommend that anybody try what I did. It was an extremely foolish thing to do for someone as clumsy as me.
Thanks still OP. My Note 3 is in top form again thanks to you
I did that and it fixed my poor GPS signal and it worked really well. I'll do it again for wifi pin
I did that and it fixed my poor WIFI signal. Thanks man.
I had slight water damage to my old Note 3. Since then my GSM signal has been really poor. I replaced the USB flex cable, as the phone wasn't charging as well - replacing it obviously did the job, but GSM signal issue remained.
Cleaned the GSM connectors and lifted the pins - that didn't help. When using o2 SIM inside the building it connects to o2 network straight away (signal not very good btw). When using other (Virgin in this case) SIM it doesn't connect at all and displays "Emergency calls only" message.
I think it might be the MoBo fault now, isn't it?
O2 OK but no VM reads as no CSC or wrong CSC .
Phone firmware has no knowledge of VM settings .