Database Users

Borked at last

Rooted SCH-i815 stuck at splash screen, stock Rom. Any suggestions? HELP!

Not suprised considering where you posted for help.

platodd said:
Rooted SCH-i815 stuck at splash screen, stock Rom. Any suggestions? HELP!
Click to expand...
Click to collapse
Flash back to Official Stock firmware by PC Odin.
By the way:
This is Development section.

Might try clearing cache or a factory reset otherwise, check here: http://forum.xda-developers.com/showpost.php?p=28481954&postcount=1

TonyBigs said:
Might try clearing cache or a factory reset otherwise, check here: http://forum.xda-developers.com/showpost.php?p=28481954&postcount=1
Click to expand...
Click to collapse
Thanks a bunch but I've downloaded and tried to flash these files and the problem is once the flash process reaches the completion of the install the device will auto reboot and again stop at the boot flash screen.
Even when I try to clear data and factory reset it immediately reboots and stuck again. I hope Samsung has a way to override everything and reinstall the stock firmware.

Device Stuck at Boot Screen

Hey guys this has been very frustrating for me , I do not know what I am doing wrong
I unrooted my phone using Odin
I then install CWM from the App itself
I have an unlocked 1337m
I just cant seem to get any rom to work , I know how to flash them properly they all just hang at the boot screen. I tried SHOstock and that hung , I also tried OMEGA from the i9505 section and that hung at the same spot. The only successfully flashes were MIUI and some other random stock based rom. Did i miss a step ?
Thanks alot

Go back into recovery and do a factory reset, after odin you must do a factory reset.
Thank you

TheAxman said:
Go back into recovery and do a factory reset, after odin you must do a factory reset.
Thank you
Click to expand...
Click to collapse
Thanks it worked I used another root program instead of odin

All sensors stopped after flash rom

I need some help, I really don't know what to do anymore..
I've installed the optimized cyanogenmod 13 and now my sensors don't work. It works randomly for about 10-20 minutes then stops. The only sensor that works without any problem is the light one..
I don't know what can I do. Can this be from hardware, even working sometimes?
All the sensors are recognized by phone, they just don't work.
I've already jumped into a lot of ROMs and nothing. I've already done a full wipe (system, data, caches, internal) and installed official stock ROM and nothing.
Now I'm on lollipop 9.0 and I can't get this to work even for 10 minutes, but I know that on other rom it will work for about 10 minutes.
What can I do?

Did you install the latest official stock or just any stock rom with Odin?

audit13 said:
Did you install the latest official stock or just any stock rom with Odin?
Click to expand...
Click to collapse
I installed the latest stock rom right from sammobile.

audit13 said:
Did you install the latest official stock or just any stock rom with Odin?
Click to expand...
Click to collapse
I don't know if has anything to do, but if you have a s4 with root, can you please verify if in your folder "persist" have anything? It stays right in the root.
Thanks!

Weird that stock didn't fix the issue. You also performed a factory wipe from stock recovery before booting the newly-flashed ROM for the first time?
Sorry, I don't have an s4 with me at the moment. I can check later today.

audit13 said:
Weird that stock didn't fix the issue. You also performed a factory wipe from stock recovery before booting the newly-flashed ROM for the first time?
Sorry, I don't have an s4 with me at the moment. I can check later today.
Click to expand...
Click to collapse
Do you mean the recovery that comes with stock rom? I never used him. My wipes I always do from TWRP

I really don't know what else I can do. I don't want to change de motherboard :/.. I still think that is from software

You should try wiping with stock recovery.

audit13 said:
You should try wiping with stock recovery.
Click to expand...
Click to collapse
Install the stock rom again, then turn off phone, power+volume up+home and do a wipe data/cache factory reset? Is this different from the TWRP wipe?
Maybe I can do this wipe via settings on the system?
On lollirom 9.0 I can't get them working even for 10 minutes

Sometimes, a wipe using stock recovery works better than a wipe using a custom recovery.
Flash with Odin and use stock recovery to wipe before booting the stock ROM for the first time.

audit13 said:
Sometimes, a wipe using stock recovery works better than a wipe using a custom recovery.
Flash with Odin and use stock recovery to wipe before booting the stock ROM for the first time.
Click to expand...
Click to collapse
Ok.. I'll try to do this and I post the result here. This not working, there's anything else I can do?

Not sure what else to try as flashing stock and wiping with stock recovery usually fixes software glitches.

audit13 said:
Sometimes, a wipe using stock recovery works better than a wipe using a custom recovery.
Flash with Odin and use stock recovery to wipe before booting the stock ROM for the first time.
Click to expand...
Click to collapse
Again, only light sensor working.. anything else?
The sensorhub test gives me PASS.

Everything was working before flashing cm13?

audit13 said:
Everything was working before flashing cm13?
Click to expand...
Click to collapse
Yes, perfectly. Never had this issues before optimized cyanogenmod 13 :/. That's why I think its from software, but I have no idea what to do anymore..

I am at a loss too. The phone shows the correct imei, baseband, and bootloader?

audit13 said:
I am at a loss too. The phone shows the correct imei, baseband, and bootloader?
Click to expand...
Click to collapse
Yes. The phone is 100% ok, just the sensors not working.. Now even for 10 minutes is working :/, just the light sensor

Anything else I can do? :/

Dont know if a logcat can help, but..
I just started the phone and searched for "gyro"
As you can see, gyro_sensor was not found.. Maybe we got something here?????
--edit--------
Searching now I found that this is something about .idc files, right in /system/usr/idc. I just don't know what file.. @audit13

How about flashing a custom rom that is based on the original stock rom?

cannot go back to stock firmware?

hi, Im actually on crdroid and I need to go back to stock samsung firmware
I downloaded G900FXXS1CPK1_G900FITV1CPJ1_G900FXXU1CPJ1_HOME.tar and I tried to flash using odin
stuck at SAMSUNG logo after rebooting (for a split of a second I can see a dead android with NO COMMAND written before SAMSUNG logo)
go back to recovery /(which is not TWRP anymore) and wiped data and cache. nothing has changed
I now have installed crdroid again but I need to go back to official samsung, somebody can help?

where did you get the tar file from? did it say completed in Odin?

from updato.com and odin sais PASS with green color
EDIT is there, maybe, a custom rom from original samung firmware?

wiping data and cache from recovery not enough, do a factory reset then if still a no go redo odin fw flash

vincom said:
wiping data and cache from recovery not enough, do a factory reset then if still a no go redo odin fw flash
Click to expand...
Click to collapse
a factory reset is just wiping system, cache and dalvik in essence. I always do a factory reset, wipe cacke, dalvik and system 3x each and delete the android folders if im just flashing a new ROM. Plus, hes doing an Odin flash, so wiping shouldnt be necessary, but deleting the android folders should still be needed
---------- Post added at 12:22 PM ---------- Previous post was at 12:22 PM ----------
zazolo said:
from updato.com and odin sais PASS with green color
EDIT is there, maybe, a custom rom from original samung firmware?
Click to expand...
Click to collapse
get it from sammobile.com/firmwares. Thats the only real place to get them. everywhere else can have untrusted files

odin does not wipe/reset
in stock recovery iirc theres no wiping data, so reset needs to be done, its solved many fw updates/downgrades issues via either ota or odin.
i usually wipe everything(Dalvik, System, Data, Cache) via twrp b4 flashing w/odin

while I'm downloading from sammobile (sloooooooooow), I'm tring to flash fw again
I'm still getting SAMSUNG logo problem...
tried wiping again cache... nothing
flashed TWRP and did wipe factory reset... again, same issue.
I did a full wipe before flash

zazolo said:
while I'm downloading from sammobile (sloooooooooow), I'm tring to flash fw again
I'm still getting SAMSUNG logo problem...
tried wiping again cache... nothing
flashed TWRP and did wipe factory reset... again, same issue.
I did a full wipe before flash
Click to expand...
Click to collapse
the sammobile d/l does take FOREVAAAAR!!! but wait for that to complete and try it. im betting that your other tar.md5 was corrupt

15 minutes to go....

steps I did:
1: via TWRP wiped EVERYTHING
2: connected to PC in download mode and flashed the firmware via ODIN 3.12
3: booted in recovery and wiped data/factory reset and cache partition
4: reboot and...... seems to work fine (feared for a moment, took almost 20 minutes to start apps optimization)

zazolo said:
steps I did:
1: via TWRP wiped EVERYTHING
2: connected to PC in download mode and flashed the firmware via ODIN 3.12
3: booted in recovery and wiped data/factory reset and cache partition
4: reboot and...... still stuck at SAMSUNG LOGO
Click to expand...
Click to collapse
how long did u wait at logo
try this version of odin, i never had a fail w/it on my s5, in odin only use the "AP" button and leave settings as they are.
ODINv3.10

corrected my original post, after 20 minutes of waiting, started apps optimization, thanks to everybody

zazolo said:
steps I did:
1: via TWRP wiped EVERYTHING
2: connected to PC in download mode and flashed the firmware via ODIN 3.12
3: booted in recovery and wiped data/factory reset and cache partition
4: reboot and...... seems to work fine (feared for a moment, took almost 20 minutes to start apps optimization)
Click to expand...
Click to collapse
cool. told ya we could get ya up and running
also, the initial boot after the Odin flash can take forever too

Can somebody please help me. I flashed a new firmware with odin. It flashed sucssesfully but it keeps restarts on samsung logo so it doesn't boot on. Please guys help me to fix this problem ???

mrllokman said:
Can somebody please help me. I flashed a new firmware with odin. It flashed sucssesfully but it keeps restarts on samsung logo so it doesn't boot on. Please guys help me to fix this problem ???
Click to expand...
Click to collapse
whats the model of your phone, what odin version did you use, what firmware did you flash and where did you get it from?

youdoofus said:
whats the model of your phone, what odin version did you use, what firmware did you flash and where did you get it from?
Click to expand...
Click to collapse
I have Sm G900H, my odin version is 3.11.1 I flashed the firmware from sammobile. It boots up only if i install cyanogenmod.
I think I have problem with kernel. I don't know please help

mrllokman said:
I have Sm G900H, my odin version is 3.11.1 I flashed the firmware from sammobile. It boots up only if i install cyanogenmod.
I think I have problem with kernel. I don't know please help
Click to expand...
Click to collapse
what version of android is the cyanogenmod you had installed and what version are you flashing in Odin?

youdoofus said:
what version of android is the cyanogenmod you had installed and what version are you flashing in Odin?
Click to expand...
Click to collapse
cm13 and i wante to go back to stock G900HXXU1CPL4_G900HOXY1CPL4_G900HXXU1CPCA_HOME.tar

mrllokman said:
cm13 and i wante to go back to stock G900HXXU1CPL4_G900HOXY1CPL4_G900HXXU1CPCA_HOME.tar
Click to expand...
Click to collapse
try a fresh download of the tar.md5 and flash it in the odin posted above 3.10

Unrooted Note 4 rogers Canadian edition stuck in recovery booting bootloop!

Hi I would like to get some help in fixing my Note 4 Rogers edition. The phone is stuck in recovery booting boot loop I have tried all the tricks online to get the phone out of loop but failed.
The phone is unrooted from day one. I did not flash any roms, but I did flash the official rom from sammobile.
Phone model is SM-N910W8
Official Rom
Unrooted
Any help would be appreciated.
Thanks

mal124 said:
Hi I would like to get some help in fixing my Note 4 Rogers edition. The phone is stuck in recovery booting boot loop I have tried all the tricks online to get the phone out of loop but failed.
The phone is unrooted from day one. I did not flash any roms, but I did flash the official rom from sammobile.
Phone model is SM-N910W8
Official Rom
Unrooted
Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
Try flashing the stock ROM once more, Then once in recovery hit Wipe Cache, Do this like 3 times and reboot. See if that lets you into the device as normal.

cash2387 said:
Try flashing the stock ROM once more, Then once in recovery hit Wipe Cache, Do this like 3 times and reboot. See if that lets you into the device as normal.
Click to expand...
Click to collapse
Thanks for reply. I have flashed the official rom at least 4 times but it is still stuck in recovery booting boot loop. And after that I get a No command message. Then it goes back to bootloop.

mal124 said:
Thanks for reply. I have flashed the official rom at least 4 times but it is still stuck in recovery booting boot loop. And after that I get a No command message. Then it goes back to bootloop.
Click to expand...
Click to collapse
What about flashing TWRP 3.0.2 using Odin and then flash something like Norma or Im running Twiztd S7 port. Then once you have that ROM up. See if you can flash back to stock again. Ive seen sometimes that you may need to wipe cache or factory reset in factory recovery after doing Odin.