Database Users

[GUIDE]European model Bootloader unlock and root

Here is the translated guide to unlock bootloader on European model from the link I posted earlier.
I’m not responsible of any damage made to your device.
Download, unzip and run the Huawei product ID generator then select Huawei Y300-0000 in the product model field. Paste your IMEI in the product IMEI field and it should give you a product ID. We will use it later.
Go to http://en.club.vmall.com/emotiondownload.php?mod=unlock&action=apply tick the box at the end of the Unlocking Agreement and click next.
Here is what to choose/write in the form:
Product type: Smartphone
Product model: Huawei Y300-0000
Product SN: The SN of your Mate 7
Product IMEI/MEID: The IMEI of your Mate 7
Product ID: The number Product ID Generator gave you.
Enter the captcha and click submit.
Now it should give you your unlock code.
Download mate7.zip from https://mega.co.nz/#!aB8mRATA!nY7VJPUEESxBv5iRZ95vORbcjUQwLoyEyHagPi6RMGI and unzip it.
Install the driver if needed by running Driver\all\DriverSetup.exe
Copy SuperSU-PRO-V2.09.zip to your sd card.
Reboot your Mate in fastboot by holding Volume Down+Power for 10 seconds and plug it.
Unzip Recovery_b119.zip, go to tools, hold Shift and right click then choose “Open command windows here.
Type:
Code:
Oem unlock fastboot [your unlock code]
Now your bootloader is unlocked. Don’t close the command windows, now we will install the ClockWorkMod recovery.
In the window type:
Code:
Fastboot flash recovery recovery_h60.img
You can flash recovery_stock.img with the same command if you want to revert back to the stock recovery.
Now go into recovery by holding Volume Up+Power for 10 seconds.
Then go to:
Install zip>choose zip from /storage/sdcard1> SuperSU-PRO-V2.09.zip and select yes.
Reboot.
Your Mate 7 is now unlocked and rooted!

Uryldor said:
Here is the translated guide to unlock bootloader on European model from the link I posted earlier.
I’m not responsible of any damage made to your device.
Download, unzip and run the Huawei product ID generator then select Huawei Y300-0000 in the product model field. Paste your IMEI in the product IMEI field and it should give you a product ID. We will use it later.
Go to http : //en.club.vmall.com/emotiondownload.php?mod=unlock&action=apply (can’t post link at the moment), tick the box at the end of the Unlocking Agreement and click next.
Here is what to choose/write in the form:
Product type: Smartphone
Product model: Huawei Y300-0000
Product SN: The SN of your Mate 7
Product IMEI/MEID: The IMEI of your Mate 7
Product ID: The number Product ID Generator gave you.
Enter the captcha and click submit.
Now it should give you your unlock code.
Download mate7.zip from https : //mega.co.nz/#!aB8mRATA!nY7VJPUEESxBv5iRZ95vORbcjUQwLoyEyHagPi6RMGI and unzip it.
Install the driver if needed by running Driver\all\DriverSetup.exe
Copy SuperSU-PRO-V2.09.zip to your sd card.
Reboot your Mate in fastboot by holding Volume Down+Power for 10 seconds and plug it.
Unzip Recovery_b119.zip, go to tools, hold Shift and right click then choose “Open command windows here.
Type:
Code:
Oem unlock fastboot [your unlock code]
Now your bootloader is unlocked. Don’t close the command windows, now we will install the ClockWorkMod recovery.
In the window type:
Code:
Fastboot flash recovery recovery_h60.img
You can flash recovery_stock.img with the same command if you want to revert back to the stock recovery.
Now go into recovery by holding Volume Up+Power for 10 seconds.
Then go to:
Install zip>choose zip from /storage/sdcard1> SuperSU-PRO-V2.09.zip and select yes.
Reboot.
Your Mate 7 is now unlocked and rooted!
Click to expand...
Click to collapse
Great, thanks a lot.

You're welcome! I'm happy that this guide can help someone.

Uryldor said:
You're welcome! I'm happy that this guide can help someone.
Click to expand...
Click to collapse
Great, thanks. Two questions though.
1. Does this void warranty?
2. Will OTA's still work?

1. If you unlock bootloader and flash back stock recovery, no...
2. No OTA with cwm-recovery...
... send from hell... hahahaaaa...

Thanks for this. There is a small error in the first command however. The first command for unlock should be "fastboot oem unlock [your unlock code]" The other instructions are fine.

it asks me for ID not working..
edit finally got it !!
---------- Post added at 10:28 PM ---------- Previous post was at 10:24 PM ----------
boober78 said:
Great, thanks. Two questions though.
1. Does this void warranty?
2. Will OTA's still work?
Click to expand...
Click to collapse
once u done rootig and flashing all good flash stock recovery back .. u dont need it .. bcos no custom roms..

thank you m8 very much,it works

Uryldor said:
Here is the translated guide to unlock bootloader on European model from the link I posted earlier.
Click to expand...
Click to collapse
Change that first command .. it is wrong way round .. ! people gets confused..
from
Oem unlock fastboot [your unlock code]
to
fastboot oem unlock [your unlock code]
like abbas told you ..

help
I don't understand superSU.zip can i ,install from google superSu pro?
And how to fix hisuite not connect when i turn on deplugin ?
Plzz help me

Guide is full of faults, please correct them or delete your thread.

Please Root Mate 7 TL-09
Hi
Not Link Root How to send email not support Model MT7
Now What I Do Is Very Necessary please:laugh:

is it possible to get root but keep OTA updates

Product model
I have entered the correct things, but the website says wrong product model
Please help

Defender666 said:
is it possible to get root but keep OTA updates
Click to expand...
Click to collapse
From what I have read, Unlock bootloader, install CWM, root, then install stock recovery and OTA will still work.
Hope thats right, my M7 is still on its way to me!

Why so much stress, but the flash. News and Root.
http://forum.xda-developers.com/mat...v1-0-0-mt7-l09-b137sp03-t3044695?goto=newpost

Hi all,
followed the guide (with some adjustments) and I got everything working.
CM and rooting.
Now I have a question : I still have OTA asking me to update (before rooting the update was already present and I even started the download, like up to 10%). Is it safe to do it? will the update leave the phone rooted or not?
thanks!

alareth1976 said:
Hi all,
followed the guide (with some adjustments) and I got everything working.
CM and rooting.
Now I have a question : I still have OTA asking me to update (before rooting the update was already present and I even started the download, like up to 10%). Is it safe to do it? will the update leave the phone rooted or not?
thanks!
Click to expand...
Click to collapse
If you have custom recovery installed, you need to re-install stock recovery first, otherwise the update.zip file doesn' t install. After installation of the update well...depends...someone is stating that root still remains, other not...
Personally I lost the root, but followed the procedure and obtained the root again. Simple.

I have a MT7-L09 with 130 firmware. Did all the instructions in the tutorial, but Im always getting the message "We regret to say that the information you are searching is not found. Pleae mail to [email protected], We'll respond to you as soon as possible, thanks." I have wrote to Huawei, in short email they explained this model is not supported for unlocking directly from them and advise me to search other methods on my own risk. Please any help or advise what should I do to unlock the bootloader, ROOT and install CWM?

vsdmch said:
I have a MT7-L09 with 130 firmware. Did all the instructions in the tutorial, but Im always getting the message "We regret to say that the information you are searching is not found. Pleae mail to [email protected], We'll respond to you as soon as possible, thanks." I have wrote to Huawei, in short email they explained this model is not supported for unlocking directly from them and advise me to search other methods on my own risk. Please any help or advise what should I do to unlock the bootloader, ROOT and install CWM?[/Q]
Look at here dude, it' s your Bible...
http://mate7.net/ascend-mate7-bootloader-unlock/
Happe Easter to all of you.
Click to expand...
Click to collapse

QPST flashing + VibeUI 3.1 S272 ROM + Unlock BL + TWRP + SuperSU + Region change

Thanks to:
Easyloy for Recovery
Ampher for idea
rgusev for bring to idea life
alximiktik for bring needed files
Flashing ROM with QFIL:
Getting ready:
Download and install on your PC:
vcredist_x86.zip
QPST_2.7.422.ZIP
Qualcomm_USBDriver_2.1.0.5.zip or Qualcomm_USB_Drivers.zip
Turn off your Vibe P1.
Hold Volume Up key and plug in USB cable conected to PC.
Open Device Manager on PC (press win+r and type "mmc devmgmt.msc" without quotes) then seek Qualcomm Lenovo HS-USB QDLoader 9008 in COM & LPT ports.
If you can see Qualcomm Lenovo HS-USB QDLoader 9008, you are ready to flash!
Flashing ROM:
Downoad QFIL ROM ( for exampe one of this: https://yadi.sk/d/hY3kNWJGrnpCU?ncrnd=5389 ) and unpack it.
Find QFIL in your Stary menu and launch it.
Select Qualcomm Lenovo HS-USB QDLoader 9008 (COM*) port by using "Select Port..." button
Click "Browse..." near "Programmer patch" field and select prog_emmc_firehose_89**.mbn file from the ROM's folder.
Click "Load XML…" and select "rawprogram0*.xml" file and then select "patch0.xml" file.
Press "Download" button and wait untill it ends (reboot or "ready" message).
If "ready" message appears and device does not go to reboot, then hold Volume UP + Power buttons for ~12 sec.
Flash unlocked bootloader & recovery:
Read "Flashing ROM" manual
Download P1a42_S272_160506_ROW_QPST (+uBL +Recovery + Root +region ) and unpack it.
If you have different ROM installed, then flash S272 (by selecting rawprogram0.xml) otherwise go to the next step.
Flash unlocked bootloader (by selecting rawprogram_unlock.xml) and reboot into ROM.
Open developers options and select "OEM unlock".
Also you can check Bootloader status by rebooting to bootloader and typing "fastboot oem device-info" (without quotes), if it still locked, then type "fastboot oem unlock-go" (without quotes).
After (and only then) bootloader will be unlocked you can flash custom recovery by one of following ways: by QFIL, selecting rawprogram_twrp.xml or bootloader (fastboot flash recovery recovery_twrp.img).
When recovery is flashed, you can get into it by holding Volume UP + Volume DOWN keys while booting or using "adb reboot recovery" console command (without quotes).
Advanced flash unlocked bootloader & recovery:
BootLoader unlock:
Download file: emmc_appsboot.zip
Unzip.
Add listed files from QFIL-ROM to the same folder:
prog_emmc_firehose_8936.mbn
gpt_main0.bin
gpt_backup0.bin
rawprogram0.xml
patch0.xml
Run rawprogram0-fix.bat
Flash using QFIL, by selecting rawprogram0_aboot.xml.
Sometimes you need to do extra staff:
Open developers options and turn on:
ОЕМ unlock
USB debugging
Download: unlock-bl.zip
Unzip.
Plug USB cable and run unlock-bl.bat
wait until "Ready!" or the window disapire
Ready!
Custom recovery (TWRP):
Method one, fastboot:
Download: TWRP-FB.ZIP
Unzip.
Run rec-inst.bat
Method two adb(Root needed):
Download: TWRP.ZIP
Unzip.
Run rec-inst.bat
Root (SuperSU):
If you suscesfully unlocked bootloader and flashed recovery then you can:
download latest SuperSU
Put it to you sdcard (do not unpack it!)
Reboot to recovery and install ZIP.
Region:
To find out which region is set dial ####5993# or ####59930# using stock dialer
To change region:
Put easyimage.zip to root of SDCard
Dial ####682# using stock dialer
To get back to stock (for updating, etc.):
Flash stock ROM with QFIL.
You can use s272 listed above, but you also need to download, unzip and change rawprogram0.xml file before flashing to get stock recovery!

Is this the chinese version or the ROW? As far I know VIBEUI is for China.
If it's ROW I'll try it.

Teddy. said:
Is this the chinese version or the ROW? As far I know VIBEUI is for China.
If it's ROW I'll try it.
Click to expand...
Click to collapse
It's ROW! ROW also based on Vibe UI, but china ROMs has newer versions.

Any way to not install TWRP as I don't need it?Also I'll flash it when I get home.
Sent from my Lenovo P1a42 using XDA-Developers mobile app

Teddy. said:
Any way to not install TWRP as I don't need it?Also I'll flash it when I get home.
Click to expand...
Click to collapse
You can't install root on 6.0 without TWRP, but if you don't need it, woy also don't need to unlock BL, so you cat just flash ctock ROM.

Do I need to wipe my data or not? (I'll still get a backup, but ya know, just to get a titanium backup done.

Teddy. said:
Do I need to wipe my data or not? (I'll still get a backup, but ya know, just to get a titanium backup done.
Click to expand...
Click to collapse
You don't need to do any backup. But if you come to 6.0 from 5.1, you better do!

I flashed ROM everything went good, next thing I flash twrp, works, installed supersu and now I'm left with a phone without OS. I cannot get into download mode using the volume up + usb method and also I can get into the recovery. What can I do?
EDIT: After about 26 hours of just non-stop searching I finally got it flashed again.It was a painful experience but if somebody wipes the /system partition, don't hesistate to pm to help you come back on track.

Thanks for the great tutorial !
What is the difference between flashing unlocked bootloader & recovery: the easy way and advanced ?
Or there is no and both mkethods lead to same end ?

pabgar said:
What is the difference between flashing unlocked bootloader & recovery: the easy way and advanced ?
Or there is no and both mkethods lead to same end ?
Click to expand...
Click to collapse
They are lead to the same end but using different methods: manual, auto, with root or without, etc.

Can i root it without unlocking bootloader???

deadman220 said:
Can i root it without unlocking bootloader???
Click to expand...
Click to collapse
You can root only 5.1. Unlocked bootloader is the only way for 6.0 ROW ROMs.

Is there a way to lock it back or it's permanent?

deadman220 said:
Is there a way to lock it back or it's permanent?
Click to expand...
Click to collapse
You are not unlocking bootloader, you just flashing already unlocked one. So you can just flash it back!

I must say that after Marshmallow update, Vibe P1 is the best smartphone I had ever
Smooth working, great battery life, no problems at all.

After flashing TWRP and applying super su I am struck at Lenovo logo tried clearing cache and dalvik cache too still same

Is fingerpint unlock working on MM after root ?

GPSSlovakia said:
Is fingerpint unlock working on MM after root ?
Click to expand...
Click to collapse
Yes! And I'm using it on rooted ROM and with unlocked BL. But there is one little caveat: you can't unlock device with your finger for first time after reboot (it is MM feature). But after first time it working fine!

Thx for this awesome work .. ur amazing bro
---------- Post added at 11:00 AM ---------- Previous post was at 10:32 AM ----------
I want to ask about how to install updates after recovery .. i can't install updates right now after recovery

MoemenMoemen said:
I want to ask about how to install updates after recovery .. i can't install updates right now after recovery
Click to expand...
Click to collapse
You need to go back to full stock, it's the only way to get OTA.
Please look at "To get back to stock (for updating, etc.):" at first post (just updated it)!

Help zte blade S7 t920 firmware needed

Can anyone please provide me link for ZTE blade S7 t920 firmware download please? My phone got bootloop, factory reset from stock recovery doesn't help phone still unable to boot to homescreen. Been looking all over the Internet but no luck finding the firmware for ZTE blade S7 t920! Been contacted the customer service on Twitter FB page and emails from zte website but they ignore me not giving me reply from like 3 days ago! I feel like being ignored as a customer!
Sent from my 6042D using Tapatalk

Please anybody help, I don't know who else I should ask for help

I do not know whether or not this helps you in any way, since the original post has been made quite some time ago, but it may be worth a try...
This phone was sold in a few countries, and one of them I know about was Thailand. If you look up the corresponding official ZTE support page, you get this:
http://www.ztedevice.com/support/detail?id=CB70AA9C4A8C4F87AB43C34D3608D11E
The direct link to the download is:
http://download.ztedevice.com/support/product/507/6404/sd/20160726173958917.zip
(This phone was also sold in Russia, but the official product page has been removed, and I see nothing on their support page about that.)
EDIT: Browsing some more I also found these:
http://www.ztedevice.com/support/detail?id=220768DC76A54A3DA35058798581D35D
(http://download.ztedevice.com/support/product/502/201607261748731/sd/20160726175804201.zip)
http://www.ztedevice.com/support/detail?id=42960D5BCACB415ABC48079330E92530
(http://download.ztedevice.com/support/product/505/201607121001133/sd/20160712100920696.zip)
http://www.ztedevice.com/support/detail?id=11BDFB5787D145F39F40D7D303539A56
(http://download.ztedevice.com/support/product/599/201609301500128/sd/20160930150633562.zip)
http://www.ztedevice.com/support/detail?id=21C3175244A94B05A966364EE7163FE3
(http://download.ztedevice.com/support/product/508/201612081035893/sd/20161208105528911.zip)
http://www.ztedevice.com/support/detail?id=1EF6B0B3FD624F79AD5668AB53F20D2B
(http://download.ztedevice.com/support/product/509/201607261720789/sd/20160726172926681.zip)
They might not be full ROMs, but should they really help, it would be recommended to directly host them somewhere else too, in case they are removed.
ZTE ROMs are a hard task to hunt down, if this does not help I strongly recommend to dig deeper down into their support page...

Dear Member,
i too faced problem in LYF LS-5021 looks same ZTE S7-T920. i found incomplete rom from internet, which failed in flash & came to dead. Later i found update.zip for LYF in that i found that is same as S7.
I edited rawprogram.xml to file given to download & flashed. After flash phone came alive & updated with update.zip.
Now phone came to normal.
May be it will help for u.... attached updater script of Lyf LS-5021.

Inside the zip's from the ZTE -homepage u gonna find the update.zip file .... which perfectly works for the S7.
So ... is the LYF LS-5021 exactly the same phone as the S7 ... any differences?
New ROMs available?

I would also like to know if there are any updates available for the Blade S7 (other than Lolipop 5.1). I managed to download the update.zip from the ztedevice . com website and followed the instruction and was able to update using the Blade S7 ROM but only Lolipop 5.1 is available. Can anyone confirm if LYF LS-5021 ROM can be used on the S7 and what ROM's are available?

kappwj said:
I would also like to know if there are any updates available for the Blade S7 (other than Lolipop 5.1). I managed to download the update.zip from the ztedevice . com website and followed the instruction and was able to update using the Blade S7 ROM but only Lolipop 5.1 is available. Can anyone confirm if LYF LS-5021 ROM can be used on the S7 and what ROM's are available?
Click to expand...
Click to collapse
The real question is if there is anything official above 5.1 available for the Lyf. Needrom seems to host official 6.0, but it would be nice to confirm that with Lyf support. IDK if they would answer, but you might as well should try your luck with the ZTE ROM compatibility (tough they most likely will not take any responsibility and not advise you to try flashing their ROM). Their support page is here:
https://www.mylyf.com/self-help.html
Also Lyf LS-5021 may be the Lyf Earth?

ЯazoR said:
The real question is if there is anything official above 5.1 available for the Lyf. Needrom seems to host official 6.0, but it would be nice to confirm that with Lyf support. IDK if they would answer, but you might as well should try your luck with the ZTE ROM compatibility (tough they most likely will not take any responsibility and not advise you to try flashing their ROM). Their support page is here:
Also Lyf LS-5021 may be the Lyf Earth?
Click to expand...
Click to collapse
It is the Lyf Earth 2 (or second gen earth). Just checked Needrom and cannot find any rom for Blade S7 . I will check Needrom for official Lyf 6.0. But thanks for the feedback.

ZTE blade S7 T920
I also have a ZTE blade S7 and I know the suffer of finding this phone's firmware... But I am still a Standard android customizer so yeah after searching the web... No firmware found for this phone... So here's what I've done to make a backup..
I rooted my phone using kingoroot via PC
-steps-
-download the kingoroot application on pc
-install the application on pc.
#on the phone#
- battery charged to 100% because of fear the process will fail because of the battery
-enabled unknown sources in
*settings/security/unknown sources*
-enabled developer options
*settings/about phone/Build number(just keep spamming the build number till it says developer mode enabled)
- go back to settings and enable usb debuging
*settings/developer options/usb debuging(tick the box)
-then connect phone to pc then a small box will show up on the phone
tick allow this pc bla~ bla~ and
press ok or accept
#on the pc#
-open kingoroot application
-wait for the application to load
-then press root device
-if the phone shows something that needs to install ,just press install
-Then the phone will automatically change to a blue screen with percentage numbers on screen.
Wait for 10-20 min
-Then on the phone will show up root success with a giant blue tick
-uninstall all the cleaner or battery saver that is installed by kingoroot...
-then reboot phone...
Now find TWRP recovery from xda somewhere for the zte blade s7
The thread
https://www.google.com/amp/s/forum....eneral/zte-s7-blade-recovery-cm-t3567806/amp/
Direct download link
https://drive.google.com/drive/mobile/folders/0B4Ya5mT9NhjqUUZyVTFDT18xQlU
-Download the above file on the phone
- after the download, there will be a file called recovery.img
- open flashify and slide to backup/restore
-backup the current recovery
-after backup slide back to Flash and pick Recovery Image
-pick choose a file and find the recovery.img that we downloaded earlier
And flash
-After flashing is done press flash more and it will leave you on the flash menu...
-press the three dot on the top right or left side (mine is right side)
-choose reboot recovery...
And now twrp will show up...
On first boot to twrp it will ask for allowing to modify the system...
Just swipe the blue circle
And now choose backup
For me, I check all the box to backup everything but the nesesary one is just boot and system...
And wallaahh backup done...
For my recommendation ,backup the file to a memory card and put it in a safe place just for safety.. Because you wont know maybe you'll accidentally deleted the file while formatting...
And that's it... Well done...

Anyone can help?
I need custom rom for zte blade s7

Is there any flashable msm8939.mbn/hex and msimage_8939.mbn for this phone? or any other unbrick method for ZTE Blade S7? I'm searching the net inside out and cant find a thing. Somebody please point in the right direction
I would really appreciate it to the max

We hit a dead end with this phone

I have a way but u need brains to do the following...
-To flash a custom recovery to the phone via sp flash tool or adb
The reason is because I have a backup rom of my zte t920 but it needs a custom recovery to reflash

Jo_bell said:
I have a way but u need brains to do the following...
-To flash a custom recovery to the phone via sp flash tool or adb
The reason is because I have a backup rom of my zte t920 but it needs a custom recovery to reflash
Click to expand...
Click to collapse
Anything is doable at this point. So tell me how am I going to flash a custom recovery? I do have the SP flash tool, so what else do I need?
Can you hook me up with your backup rom? I would really appreciate it

terawyvenx said:
Anything is doable at this point. So tell me how am I going to flash a custom recovery? I do have the SP flash tool, so what else do I need?
Can you hook me up with your backup rom? I would really appreciate it
Click to expand...
Click to collapse
Ok I will upload my backup rom to google drive and link will be sent on completion
I dont think sp flash tool can help on this... Becuase it needs the actual firmware scatter loading file... Which in this case... I dont have... :crying: still finding a way to create the scatter file myself.. No luck..
So.. Adb should be the hero here... But only if u hv usb debuging enabled before
Using a pc or laptop install adb to your pc/laptop from anywhere in xda...
The fastest and easiest is on this thread
https://forum.xda-developers.com/showthread.php?t=2588979
And download the twrp recovery image. From this thread
#the recovey is named recovery.img#
https://forum.xda-developers.com/android/general/tutorial-how-to-install-twrp-zte-blade-t2953998
*1* Download and install the adb on ur pc and put the custom recovery in any folder #inside an empty folder with the recovery is the best choice#
*2* After installing the adb.. Go inside the folder that contains the recovery.img...
*3* #without highlighting any file# put ur mouse pointer at any empty space in the folder , HOLD SHIFT AND RIGHT CLICK ON YOUR MOUSE. And there will be an extra option that says Open Command Prompt here or Open Power Shell here
*4* Try to boot up ur device as far as it can go in this case the zte logo and and on the pc inside the command prompt from *3* and type in adb devices and press enter.. If it shows a reading. Example, F2xhk7 device ur in luck... Go to *5*
.. But if it shows red notes.. . Try changing usb ports and usb cable #in my case before... The computer usb 3.0 port does not read my device.. *the usb port coloured blue*.. so I use other ports and it worked# :fingers-crossed:
If it still does not connect.. Then ur out of luck... The only way is through sp flash tool... Try asking one of the developers to help...
*5* congratulations if u made it here.. :laugh: now back on business...
-Type in adb reboot fastboot and the device will restart to fastboot
-Now type in fastboot flash recovery recovery.img note *the recovery.img must be the duplicate as the name of the recovery* * I repeat the command is. fastboot flash recovery recovery.img the word recovery is meant to be there *
- after the flash ,reboot the device into recovery by typing.
fastboot reboot recovery or either combimation of power and volume up button
If the recovery shows twrp.. Ur in luck then.. :laugh:

Jo_bell, you sir, are the man!:good: ....i will await your Google drive link. Would generating a scatter file require an actual working ZTE blade S7 to do? Or cant it be generated using a tool of some sort?

Jo_bell said:
Ok I will upload my backup rom to google drive and link will be sent on completion
I dont think sp flash tool can help on this... Becuase it needs the actual firmware scatter loading file... Which in this case... I dont have... :crying: still finding a way to create the scatter file myself.. No luck..
So.. Adb should be the hero here... But only if u hv usb debuging enabled before
Using a pc or laptop install adb to your pc/laptop from anywhere in xda...
The fastest and easiest is on this thread
https://forum.xda-developers.com/showthread.php?t=2588979
And download the twrp recovery image. From this thread
#the recovey is named recovery.img#
https://forum.xda-developers.com/android/general/tutorial-how-to-install-twrp-zte-blade-t2953998
*1* Download and install the adb on ur pc and put the custom recovery in any folder #inside an empty folder with the recovery is the best choice#
*2* After installing the adb.. Go inside the folder that contains the recovery.img...
*3* #without highlighting any file# put ur mouse pointer at any empty space in the folder , HOLD SHIFT AND RIGHT CLICK ON YOUR MOUSE. And there will be an extra option that says Open Command Prompt here or Open Power Shell here
*4* Try to boot up ur device as far as it can go in this case the zte logo and and on the pc inside the command prompt from *3* and type in adb devices and press enter.. If it shows a reading. Example, F2xhk7 device ur in luck... Go to *5*
.. But if it shows red notes.. . Try changing usb ports and usb cable #in my case before... The computer usb 3.0 port does not read my device.. *the usb port coloured blue*.. so I use other ports and it worked# :fingers-crossed:
If it still does not connect.. Then ur out of luck... The only way is through sp flash tool... Try asking one of the developers to help...
*5* congratulations if u made it here.. :laugh: now back on business...
-Type in adb reboot fastboot and the device will restart to fastboot
-Now type in fastboot flash recovery recovery.img note *the recovery.img must be the duplicate as the name of the recovery* * I repeat the command is. fastboot flash recovery recovery.img the word recovery is meant to be there *
- after the flash ,reboot the device into recovery by typing.
fastboot reboot recovery or either combimation of power and volume up button
If the recovery shows twrp.. Ur in luck then.. :laugh:
Click to expand...
Click to collapse
So hows the upload coming along?

TWRP 3.1.1-1 Full + Stock B16 for TWRP (Full+Clean)
https://www.androidfilehost.com/?w=files&flid=211817

NFound said:
TWRP 3.1.1-1 Full + Stock B16 for TWRP (Full+Clean)
https://www.androidfilehost.com/?w=files&flid=211817
Click to expand...
Click to collapse
I don't see this will help though. The phone wont boot up, so I cant put the phone in recovery mode or download mode.
So I cant flash TWRP or even do SD card upgrade with it. If there's anything in that firmware from the link you left above that
can help boot up the phone again, please by all means point it out.
I really appreciate it thanks

how do i update to custom roms
NFound said:
TWRP 3.1.1-1 Full + Stock B16 for TWRP (Full+Clean)
https://www.androidfilehost.com/?w=files&flid=211817
Click to expand...
Click to collapse
could you please explain the process of updating to the custom roms from a working S7. please. thx

[GUIDE] Root Huawei Honor 8 SMART and install TWRP custom recovery (EMUI 5.X)

Note-
Applicable for Windows 7, Windows 8 and Windows 10
Similar steps are applicable for EMUI 4.X as well but TWRP file will change.
Hello Fellow Members,
Did not find any post mentioning rooting for Honor 8 SMART and got requests via PM and on FB to add it for EMUI 5. If there are any, let me know and I will take down this thread. I will just simplify the steps so that any new users can do this without any problem and without any prior experience to rooting, it may be long but will be the simple enough for all the users.
Prerequisites-
Enable the developer option in settings-
Go to Settings--> About Phone-->Tab build number 7 times to enable this setting.
Go back in setting page, just above system update, you will see a new menu as -Developer Options
Scroll for the debugging section and enable the USB Debugging
You will be prompted for the confirmation with RSA key, just accept it.
Enable OEM Unlock in Developer Options (just above the USB debugging option) – Most probably this option will not be there on EMUI 5.0 (only few have seen on EMUI but it was there on EMUI 4.1 for all but rarely on EMUI 5.0 or may be because I have used dload most of the time which grayed out this)
Please note down you build number, this may become handy in case something goes wrong to restore your phone via DLOAD. In Settings- About phone- Build Number
Installation of required Drivers.
Connect your phone to PC and install Hi Suite on PC and it will additionally install all the necessary drivers to PC and HiSUite on Mobile.
Download and Install ADB from Link
Accept all the prompts and install ADB drive system wise.
Once installation is completed, if default options are chosen, it will be under C:\adb
Downloading the necessary files.
Download TWRP from Link Thanks to @OldDroid for his Original Thread . Rest of the contributor and credit in original thread by OldDroid.
Move the downloaded file under C:\adb or wherever you have installed the ADB.
Download the SuperSU file from this Link and put it in SD card or keep handy on PC so that you can copy to internal memory later.
Get the unlock as mentioned in this thread
Actual Procedure
Unlocking the bootloader-
Backup all your data as unlocking the bootloader will reset the device and all your data will be erased.
On windows machine, go to folder C:\adb or wherever you installed the adb drivers.
Press shift+right click together and select Open command prompt here
Run - adb reboot bootloader (this command may prompt for acceptance of RSA key if not already accepted)
This will boot the phone into bootloader mode.
Run - fastboot oem unlock <16 digit unlock code- Put your actual code you obtained from Huawei site > (This step will unlock the bootloader and will erase all your data)
Phone will restart automatically.
Installing TWRP
Once on the system, open the PowerShell or command prompt again in ADB folder (can use the previous instance as well)
Run - adb reboot bootloader
Once in bootloader, Run - fastboot flash recovery twrp-3.1.1-0-venus.img (This will install the TWRP recovery for EMUI 5.0 on your phone)
Once done with the flashing the TWRP, Run - fastboot reboot
Rooting
Once booted to system, open the PowerShell or command prompt in ADB folder (can use the previous instance as well)
Run - adb reboot recovery
And your phone will boot into the TWRP recovery.
Copy the SuperU file downloaded to SD card or Internal memory.
Install the SuperSU zip.
Reboot and enjoy.
Happy Flashing.

I have try,but it doesn't work.

Snoopys Woodstock said:
I have try,but it doesn't work.
Click to expand...
Click to collapse
One of the user, imssk has tried this and worked fine for him without any problem. What is the error you are getting

Cool thanks. Different question: Why honor does not provide monthly or 3 months security updates.Very disappointed with them. I know we are not getting Oreo update but atleast provide security update in at least three months.

please help me sir im aniket from india ive rooted the phone accordingly but i made a mistake while formatting from twrp and lost encryption and then i formatted the whole os and as downloaded the stock firmware from official consumer huawei site the rom doest gets flashed i even tried flashing by extracting the update.app file but still the system file wont flash and fails every time please help me as sson as possible

Aniket02141 said:
please help me sir im aniket from india ive rooted the phone accordingly but i made a mistake while formatting from twrp and lost encryption and then i formatted the whole os and as downloaded the stock firmware from official consumer huawei site the rom doest gets flashed i even tried flashing by extracting the update.app file but still the system file wont flash and fails every time please help me as sson as possible
Click to expand...
Click to collapse
Flashing via twrp or dload method?

Custom ROMs?
Hello I have been searching for custom ROMs for ven-l22 but haven't found any. Would you know of any? Thanks.

Babakkardan said:
Hello I have been searching for custom ROMs for ven-l22 but haven't found any. Would you know of any? Thanks.
Click to expand...
Click to collapse
Use p9 lite ROM. It will work

Thanks that is very useful.
Is USB otg working on this phone?

Babakkardan said:
Thanks that is very useful.
Is USB otg working on this phone?
Click to expand...
Click to collapse
With custom ROM and root, yes.

Huawei disabled the site.
I sent them email and they refused to give me a key I am their customer.I paid them.How can I unlock it?

VFR99 said:
I sent them email and they refused to give me a key I am their customer.I paid them.How can I unlock it?
Click to expand...
Click to collapse
Via paid services like dc unlocker, Chimera tool, HCU client etc.

I don't want to pay
shashank1320 said:
Via paid services like dc unlocker, Chimera tool, HCU client etc.
Click to expand...
Click to collapse
It was free now why should I pay?Come on they are a dumb company.

VFR99 said:
It was free now why should I pay?Come on they are a dumb company.
Click to expand...
Click to collapse
Well thats something i cant comment
They have stopped providing the code long back

shashank1320 said:
Well thats something i cant comment
They have stopped providing the code long back
Click to expand...
Click to collapse
It's not your fault

Downgrade ASUS MEMO PAD7 (ME70C)

Hello, I want to share with you what I managed to do (Asus support wrote to me that it is impossible). The whole DOWNGRADE manual is slightly complicated but in my case it worked. Asus wrote that it is not possible to return to the older version of the android in the K01A (me70c) due to the updated bootloader ...
ook let's get to the point.
Files that you will need:
1.Recovery (disposable)
link: http://androidhost.org/KYRT5
2.ADB Flashtools
link: http://androidhost.org/P2XKs
3. tablet updated to Android 5.0
4. official software from the asus site. Android 4.4.2
link: http://dlcdnet.asus.com/pub/ASUS/EeePAD/ME70C/UL-K01A-WW-11.2.3.33-user.zip
Okey, now we're starting to play!
1. we download and unpack Fastboot.zip
2. We download the official Android 4.4.2 software (link above). Downloading and unpacking, copy files: fastboot.img, splashscreen.img and boot.img to the folder where we have unpacked ADB FASTBOOT.
4. Now copy the official Android 4.4.2 software to the memory card (K01A-WW_V11.2.3.33.zip copy to the memory card)
5. Okey, now we turn off the tablet and run it in fastboot mode (please press vol + and power and hold it for about 10 seconds.)
6. Connect it to USB and run cmd (go out to the folder where our FASTBOOT folder was previously unpacked). SHIFT + RIGHT MOUSE BUTTON and choose 'open the command window here'
7. And here you should be careful what we write:
a)fastboot flash fastboot fastboot.img
b) fastboot flash boot boot.img
c) fastboot flash splashscreen splashscreen.img
d) fastboot reboot
8. Now the device will restart, but we turn it off sharply - please hold POWER until the device turns off. Now we restart it to FASTBOOT mode (vol + and power)
9. We connect it under USB
10. Go to our folder with (one-time RECOVERY) and run 'LAUNCHER.BAR'. We write in the 'ACCEPT' window and then write 'T2' now our device should start in CWM recovey after a while.
11. Okey, now we choose 'install zip' -> 'choose zip from extrenal sdcard' -> and choose our Official software which we have previously copied to the SD card and approved. Now all we have to do is wait for the installation to finish.
12. now please reset the system by going back to CWM in the first page and approving 'reboot system now' -> 'no' -> 'no'
13. End )
I think I helped. This method worked for me and everything goes without complaint
Regards!
and I apologize for my weak English
I DO NOT ANSWER FOR THE DESTROYMENT OF THE DEVICE. EVERYTHING YOU WILL HAVE OWN RESPONSIBILITY !!! (after all, nothing bad should happen :fingers-crossed:

Dear rysiun39p!
I downloaded the firmware from the link you gave us, but there is no such a file in the zip, you mention in the seventh step.
fastboot flash flash.img (there is no "flash.img" in the provided .zip file)
Maybe you mean fastboot.img ? or that line is just an example?
Please help me if you can
Best Wishes; overclockerq9550

overclockerq9550 said:
Dear rysiun39p!
I downloaded the firmware from the link you gave us, but there is no such a file in the zip, you mention in the seventh step.
fastboot flash flash.img (there is no "flash.img" in the provided .zip file)
Maybe you mean fastboot.img ? or that line is just an example?
Please help me if you can
Best Wishes; overclockerq9550
Click to expand...
Click to collapse
Yes yes, you are right, I made a mistake at the seventh point. Instead of 'flash.img' the file should be 'fastboot.img *'. I apologize for the mistake, I will correct it soon

Dear rysiun39p!
I can't fully interpret the 10. advice!
Can you help me out? What did you mean there?
Waiting for your reply,
Best regards
PinczesiAdam

PinczesiAdam said:
Dear rysiun39p!
I can't fully interpret the 10. advice!
Can you help me out? What did you mean there?
Waiting for your reply,
Best regards
PinczesiAdam
Click to expand...
Click to collapse
Jak Polak to pisz po polsku ?
BUt what's the problem?

Aloooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooot of thanks
it's working

Hello guys,
I need your help with my Asus Memopad 7 tablet.
I have been searching and trying for 2weeks how to unlock the bootloader.
According to the K01a model, I found countless tutorials (here, youtube, other forums that led again to xda...) and everywhere the bootloader for the K01a model ME170...,173,.... was described. But nothing worked, even though a few methods had some cooperation with the tablet, but without results.
I'm glad I locked the tablet.
I only found out from ASUS support that my K01a model is the ME70C version based on the serial number.
I'm looking for how to unlock the bootloader for the ME70C, but the instructions are nowhere to be found.
And if I find this one, it is listed here in the procedure for "downgrade" with android 5 installed.
On the contrary, I need an upgrade from Android 4.3. to 5 or 6 ( :-D ) so that I can use apps whose support ended for android 4.
How did you manage to unlock the bootloader to install android 5 on your tablet?
I was trying update to UL-K01A-WW-12.8.1.41-user but the upgrade will not complete ( i'm guessing because i still have build 10.32.1.....)
Asus Memopad7 for Europe distribution: Model K01A (ME70C), Android 4.3, Kernel version: 3.4.43 [email protected] #1 Tue Jul 22 14:38:47 CST 2014
Build number: JSS15Q.WW_MeMo_Pad-10.32.1.31.3-20140722
My bootloader has only menu:
Reboot droidboot
Reboot
Factory recovery
SD Download
Power Off
SD Update
Thanks for the help.