I just cant flash any kernel from twrp latest..
When i flash kernel it show successfully flash...bit when i checked in about phone...no change ...in kernel.....every time happend this...with same...error...plz help..
Which kernel and on which ROM?
Related
I am on stock froyo ROM on my Galaxy 3 Gt-I5801. My question is if I flash CM7.2 alpha 8 using CM7.2.0-GT-I5800_Alpha8_ODIN.zip [135 Mb] file in odin , Will that result into a bootloop ? I mean after flashing ROM what will be senario
will there be a bootloop and I have to flash kernel (if yes, which kernel I have to flash
a) Arakmar's kernel listed under Alpha 8; which a zip file and not tar file
b) any one kernel under alpha8.1a which has tar file)
and after flashing kernel, there wont be any bootloop and ultimately will be result in normal boot
OR
there wont be any bootloop at first place; i.e. after flashin CM 7.2 ROM there wont be any bootloop, and what I have to do is
just update version to 8.1a through CWM and then flash kernel and then Flash .zip to get alpha8.2
really confused..I think ROM [here CM7.2.0-GT-I5800_Alpha8_ODIN.zip (135MB)]
have kernel with it also or not ???
I m sorry if this a stupid question :silly: and I think it is but I am flashing for the first time and Galaxy 3 means a lot for me.
Thanks
Nikhil_android said:
I am on stock froyo ROM on my Galaxy 3 Gt-I5801. My question is if I flash CM7.2 alpha 8 using CM7.2.0-GT-I5800_Alpha8_ODIN.zip [135 Mb] file in odin , Will that result into a bootloop ? I mean after flashing ROM what will be senario
will there be a bootloop and I have to flash kernel (if yes, which kernel I have to flash
a) Arakmar's kernel listed under Alpha 8; which a zip file and not tar file
b) any one kernel under alpha8.1a which has tar file)
and after flashing kernel, there wont be any bootloop and ultimately will be result in normal boot
OR
there wont be any bootloop at first place; i.e. after flashin CM 7.2 ROM there wont be any bootloop, and what I have to do is
just update version to 8.1a through CWM and then flash kernel and then Flash .zip to get alpha8.2
really confused..I think ROM [here CM7.2.0-GT-I5800_Alpha8_ODIN.zip (135MB)]
have kernel with it also or not ???
I m sorry if this a stupid question :silly: and I think it is but I am flashing for the first time and Galaxy 3 means a lot for me.
Thanks
Click to expand...
Click to collapse
^Nope, if you follow the steps correctly, then the chances of you ending up with a bootloop is almost negligible. However, even if you do, then just navigate to recovery and wipe your data/cache and reboot. Your phone should be working fine after that!
And yes, Alpha8 .TAR file already has a kernel present with it, so no need to flash it over again!
Happy Flashing! :good:
on CM 7.2
all went good..no bootloop....just got nervous and confuse.. thanks for reply
Hi,
Below is was my setup:
Latest TWRP Recovery
Alucard Kernel
S4 i9505
CM12.1 nightly
XPOSED v75
Viper4Android
Two days ago I decided to flash the sabermod kernel. At first I couldn't install it using the .zip (script error of some sort)
I then flashed the boot.img file as boot.
The phone was working fine for two days (rebooted twice at least).
On every Friday I download the latest nightly and flash it using the dirty flash method.
This is when I ran into trouble...
The TWRP is stuck on the Team Win screen.
I found a way to boot normally and decided to flash the alucard kernel back using Kernel Adiutor (boot.img).
The phone booted but now I have endless process stop errors (com.google.process.gapps) and I have lost root.
I need help...
Regards,
Jat
jdhot2 said:
Hi,
Below is was my setup:
Latest TWRP Recovery
Alucard Kernel
S4 i9505
CM12.1 nightly
XPOSED v75
Viper4Android
Two days ago I decided to flash the sabermod kernel. At first I couldn't install it using the .zip (script error of some sort)
I then flashed the boot.img file as boot.
The phone was working fine for two days (rebooted twice at least).
On every Friday I download the latest nightly and flash it using the dirty flash method.
This is when I ran into trouble...
The TWRP is stuck on the Team Win screen.
I found a way to boot normally and decided to flash the alucard kernel back using Kernel Adiutor (boot.img).
The phone booted but now I have endless process stop errors (com.google.process.gapps) and I have lost root.
I need help...
Regards,
Jat
Click to expand...
Click to collapse
Just reflash TWRP. Uncheck auto-reboot in Odin before flashing.
F2FS Support
I have all partitions formatted in F2FS apart from system which is EXT4. Can I flash TWRP via Odin if it is not . tar?
jdhot2 said:
I have all partitions formatted in F2FS apart from system which is EXT4. Can I flash TWRP via Odin if it is not . tar?
Click to expand...
Click to collapse
Flashing a firmware will fix the issue, both for recovery and rom
Which Firmware?
Which Firmware to flash? Obviously I can only flash via odin. Also what will happen to the F2FS partitions?
jdhot2 said:
Which Firmware to flash? Obviously I can only flash via odin. Also what will happen to the F2FS partitions?
Click to expand...
Click to collapse
Flashing will return you to ext4
Because f2fs needs a special recovery files etc... and it will be replaced.
Test it out you wont lose nothing
Flash latest samsung touchwiz?
Just to confirm you are asking to flash the latest Sammy rom which I believe is 5.0.1. however Cm12.1 is 5.1.1. If you are confident in me trying this I will download the stock rom and flash it via odin and will let you know how I go. Thanks for your help so far.
jdhot2 said:
Just to confirm you are asking to flash the latest Sammy rom which I believe is 5.0.1. however Cm12.1 is 5.1.1. If you are confident in me trying this I will download the stock rom and flash it via odin and will let you know how I go. Thanks for your help so far.
Click to expand...
Click to collapse
Yes flashing sammy, no prob always here to help
Flashing Now
I am now flashing latest Sammy rom with latest Odin.
You're a lifesaver!
Thanks for your help much appreciated.
My phone is up and running again.
Next time if I have any issues with my s4 I'll just flash the latest Sammy rom.
Hi
I have a note3 n9005 with Phronesis 5.1.1 rom installed .
I want to install latest DArkMod kernel /bootloader and modem, someone on xda gived these files to install https://idlekernel.com/flash-tools/firmware/hlte_SM-N9005XX/N9005XXUGPOK2/
I flashed these three files at the sametime using ODIN
AP_N9005XXUGPOK2_KERNEL.tar.md5
BL_N9005XXUGPOK2_BOOTLOADER.tar.md5
CP_N9005XXUGPOK2_MODEM.tar.md5
but now, phone is unable to boot , can only access to DOWNLOAD MODE and RECOVERY MODE .
how to fix it and where to find latest files ??
PS: kernel in flashable via ODIN or RECOVERY
thx
Flash stock 5.0 with odin and the rest....
is this the only solution ???
and what was the problem ? wrong files ??
So I did manage to root it and installed TWRP 2.8.7.0 and e.g. flashed the darklord rom with twrp on boot but then on reboot I only get the message like "could not boot normal" odin active
is there a dummy solution how to prepeare and check my note 3 so I can flash custom firmwares
Did you flash a kernel after rom flashing?
Note 3x
no
I didnt find any link where to download that DL Kernel 2.0
ah I understand for GPL reasons here is no kernel included so better searth for the rom on other site whrere its "complete "
Search for Darklord or Lss kernel in our thread. Install rom and don't reboot. Flash kernel immidietly then you can boot.
Good luck!
Phronesis team member
I found the Darklord rom with included Kernel which worked out of the box with a single flash
i tried to flash twrp 3.0 on my smn9005 HLTE but when i try to boot recovery it says
Booting Recovery
Bit Set Warratnyy: Recovery
then black screen apeears mobile vibrate 2 time and then retart as normal my phone is not bricked then i tried twrp 2.8.7.0 it worked fine but i am not able to install any cutom rom it gives error 3004, this rom is for HLTE, HLTEXX etc, what should i do my phone is currently running on stock LP 5.0 and i am 100% sure my phone is HLTE, HLTEXX but new twrp wont work and on older i cannot install any rom even after advance wipe
<i tried twrp 2.8.7.0 it worked fine but i am not able to install any cutom rom
ANY really or just one or two ??
2.8.70 works fine on roms but not for later ports .( see multiple posts)
If you need a later twrp .
Flash 2.8.7.0 then through TWRP flash later TWRP zip.
JJEgan said:
<i tried twrp 2.8.7.0 it worked fine but i am not able to install any cutom rom
ANY really or just one or two ??
2.8.70 works fine on roms but not for later ports .( see multiple posts)
If you need a later twrp .
Flash 2.8.7.0 then through TWRP flash later TWRP zip.
Click to expand...
Click to collapse
thank you for reply, i tried to flash twrp 3.0.zip with twrp 2.8.7.0 but i came up with same issue untill now i have tried
Potato chips(pie), AOSP 9.0 extended all failed to flash in twrp 2.8.7.0 , i cant understand why it is happening now i am flashing repair firmware then i will try it back if it fails then i will downgrade to stock 4.4 again try, i also tried Linegae 14.1 it flashed succesfully but caused bootlops now i am again back to stock
i think i cannot upgrade more from 6.0 now i am downloading TouchWiz MM :crying: :crying:
lastwarning91 said:
thank you for reply, i tried to flash twrp 3.0.zip with twrp 2.8.7.0 but i came up with same issue untill now i have tried
Potato chips(pie), AOSP 9.0 extended all failed to flash in twrp 2.8.7.0 , i cant understand why it is happening now i am flashing repair firmware then i will try it back if it fails then i will downgrade to stock 4.4 again try, i also tried Linegae 14.1 it flashed succesfully but caused bootlops now i am again back to stock
Click to expand...
Click to collapse
When u flash new TWRP first time ,backup your efs (imei,modem).
Second with TWRP 2.8.7.0 u can only flash stock Samsung rom that have aroma support.
Only TWRP 3.2.3.0, this is the latest can flash Oreo ,pie ,nougat roms without issue. But remember u can't flash Samsung roms with this and u have to go back to twrp 2.8.7. Then go back to 3.2 if u wanna flash pie ect roms
Hi all
I can successfully flash twrp-2.8.7.0-hlte-4.4.img.tar and boot into recovery.
But later TWRP,s dont boot.
JJEgan says to flash 2.8.70 and if you need a later twrp flash 2.8.7.0 then through TWRP flash later TWRP.zip.
Question is where can i get a zip of the latest TWRP. The official releases are either img or tar
Thanks
grwalker said:
Hi all
I can successfully flash twrp-2.8.7.0-hlte-4.4.img.tar and boot into recovery.
But later TWRP,s dont boot.
JJEgan says to flash 2.8.70 and if you need a later twrp flash 2.8.7.0 then through TWRP flash later TWRP.zip.
Question is where can i get a zip of the latest TWRP. The official releases are either img or tar
Thanks
Click to expand...
Click to collapse
The Twrp are always .img.tar or .img or even apk from play store https://play.google.com/store/apps/details?id=me.twrp.twrpapp. Anyway, i flashed twrp 3.2.3.0 from 2.8.7.0 ( the same one you had ) using Odin 3.11.1 without a single problem! Mybe the problem is just the Odin's version you used, have a look here too to better understand https://www.theandroidsoul.com/how-to-install-twrp-recovery-using-odin/. I hope you can solve it, good luck.
Thanks
When using 2.8.7.0 to flash latest TWRP.img, did you flash to boot or recovery? I get those choices after i select the file to flash. I assume recovery, right?
************ - -UPDATE - -*****************
Flashed img to recovery. All good, said flashing successful . . .but
Tried to reboot to new recovery but got the same boot loop.
Flashed 2.8.7.0 again using ODIN and 2.8.7.0. booted up just fine.
Re flashed 3.2.3.0 from 2.8.7.0. Again the same boot loop
Went back to 2.8.7.0 using ODIN. Booted up.
no idea what to do next
Thanks
I have same issues towards my hlte, twrp ver release later than what you indicated causes recovery boot loops, only 2.8 works. I cant even install custom rom due to unupdated twrp support.
echo-26 said:
I have same issues towards my hlte, twrp ver release later than what you indicated causes recovery boot loops, only 2.8 works. I cant even install custom rom due to unupdated twrp support.
Click to expand...
Click to collapse
You need to read first.
TWRP cannot flash Aroma based roms after 2.8 as per multiple posts .
Later android based roms use later TWRP 3 versions all posted .