Please forgive me guys if this has been asked before ..........I've searched the forum without success......but my problem is with this
;
Universal_GB_ROOT_v9.zip mediafire.com/?a99wthh9p98bm0y
I followed the advised procedure but when I get to the choices screen and select install from SD Card, I am then shown this list of options:
../
.android_secure/
Android/
DCIM/
LOST.DIR/
META-INF /
system/
Where do I start, I have tried going through in sequence with no success/response, I have then tried just selecting META-INF / & system / in sequence, again no joy....... could someone give this inquisitive old duffer a walk through, or show me what I'm doing wrong, PLEASE:fingers-crossed:
You are not supposed to extract the zip. Just select install zip from sd card, then select the root zip. Don't extract it and you will be fine.
Vedarshi said:
You are not supposed to extract the zip. Just select install zip from sd card, then select the root zip. Don't extract it and you will be fine.
Click to expand...
Click to collapse
Thanks for the quick reply......I have not extracted anything, I just downloaded the zip file went nowhere near extraction and the file in my SD card says META INF & system, no where is it named as zip.
Would you by any chance have a good link for the zip file instead.....be grateful.
You're using apply update from SD card in CWM right?
Well location of your zip file should be..
/sdcard/*here*
If you are using atock recovery then the zip file should be on top of the list.. It SHOULD be a .zip file
if you are using clockworkmod recovery then the .zip file will be at the end of the list.. Good luck
Press thanks if i helped you
Khizar Amin said:
Well location of your zip file should be..
/sdcard/*here*
If you are using atock recovery then the zip file should be on top of the list.. It SHOULD be a .zip file
if you are using clockworkmod recovery then the .zip file will be at the end of the list.. Good luck
Press thanks if i helped you
Click to expand...
Click to collapse
Thanks to everyone for patience and assistance.........sorted now:victory:
ZIP Signer for Windows.
Requirment :
JDK or JRE must be installed in your system.
Steps to use :
- Download and Extract Zip_Signer
- Place zip file you want to sign in the Zip_Signer folder.
- Run Zip_Signer.exe
- Enter the name of zip file without extension like (.zip) and hit enter.
- wait for moment and done.
- check signed folder to get your signed zip..
If you like this please hit thanks button and I appreciate.
sorry for noob-questions:
what is the sense of the signer?
moonryder said:
sorry for noob-questions:
what is the sense of the signer?
Click to expand...
Click to collapse
some recovery does not accept unsigned zip like rom or other flashable zip. If you get "Signature Verification fail" error during flashing you need to sign the zip.
You can give as information works and what this file installation method.
Help other community members. @bhavik9243
bhavik9243 said:
ZIP Signer for Windows.
Requirment :
JDK or JRE must be installed in your system.
Steps to use :
- Download and Extract Zip_Signer
- Place zip file you want to sign in the Zip_Signer folder.
- Run Zip_Signer.exe
- Enter the name of zip file without extension like (.zip) and hit enter.
- wait for moment and done.
- check signed folder to get your signed zip..
If you like this please hit thanks button and I appreciate.
Click to expand...
Click to collapse
I checked this with I337 AT&T NC1 kernel ZIP. I signed it as mentioned in read me.txt and tried to flash a cellphone. The messages were "Failed to verify whole file signature" and "Signature verification failed". As I suppose testkey.pk8 and testkey.x509.pem are not good to sign this ZIP.
Any suggestions please?
Hi bro! Help me with these questions, please!
This program in the APK version, is now in v3.4, in my case when I use it or when I sign a file, the output folder creates an equal file with a name changed to name-SIGNED.xxx but for the size that It has not seem to be the same signed file, the original weighs, for example 16MB. And the signed copy weighs 1.63 KB. Something is wrong?
1. Zip Signed for Windows has any final version superior to yours posted here?
2. Is the Android APK version of ZipSigned legit? Are they created by the same person or are they other creators? Which do you recommend?
3. We have Firmware DUMPs extracted from BLU brand terminals, but some of them ask us that the Scatter files (DUMPs in Scatter format) must be signed and gives us an error in the installation ("Failed verifications Signed"), you can help us and explain to us which files should be signed inside the folder with all the scatter files? Can you tell us if this program can sign files with the extensions .IMG or .BIN for example?
Capture: https://prntscr.com/qost19
we are planning to make our first custom rom. i need someone that can convert a tar file to zip. so i can edit the sytem file.
i need it for SM-G935F
Winzip can extract the tar after which you can create a zip of the extracted files
I recently downloaded nvram.img of my lenovo k4 note.
Sp flashtool only flashing .bin files.
But i don't know how to flash img file.
Please someone help me...
the same question! please?
got original rom, and other bin files corresponding to a7010a48 phone.
i enabled "nvram" on my scatter file, then, on the sp flash tool, always the 6045 error popups.
panchowatkins said:
the same question! please?
got original rom, and other bin files corresponding to a7010a48 phone.
i enabled "nvram" on my scatter file, then, on the sp flash tool, always the 6045 error popups.
Click to expand...
Click to collapse
Yeah, if anyone knows how to flash it...
Please write down the way...
Thanks a lot...
rakitha ranathunga said:
I recently downloaded nvram.img of my lenovo k4 note.
Sp flashtool only flashing .bin files.
But i don't know how to flash img file.
Please someone help me...
Click to expand...
Click to collapse
1. Open SP Flash tool. Press ctrl+alt+v
2. Under menu item either window or options there will be new menuitem "write memory". Click it, a new tab will appear.
3. Click the tab, select your nvram.bin file. In the start address field, enter the start address of the nvram partition (get the start address from scatter file)
4. Click start and wait for the process to finish. If all goes well you should see an "OK dialog"
5. Disconnect the phone and reboot.
PS: Make sure scatter file is loaded before proceeding with above steps and at least "preloaded" checkbox is selected
Thanks
Sent from my Lenovo Vibe K4 Note using XDA Labs
But i don't have .bin file..
I only have .img file..
rakitha ranathunga said:
But i don't have .bin file..
I only have .img file..
Click to expand...
Click to collapse
Doesn't matter it is one and the same thing, it' only an extension. What you have got is actually a RAW dump of the nvram partition. You can either name the raw dump file as .bin or .img or anything else. The extension naming is only for satisfying some tools as they either look for .bin file or .img file. So just go ahead and follow the procedure.
Thanks
Thanks man....
Really really thanks....
I will try this procedure as soon as pollible...
I does this procedure, but nothing happened...
My SN are not resetted, everything is just like nothing happened,
What should i do??
Please tell me...
panchowatkins said:
the same question! please?
got original rom, and other bin files corresponding to a7010a48 phone.
i enabled "nvram" on my scatter file, then, on the sp flash tool, always the 6045 error popups.
Click to expand...
Click to collapse
Edit by help of notepad++,Go to scatter file n edit by finding nvram data,change is_download to true n change the file and bin name as same as nvram data which u have,I hope it helps
Did it work ?
Hey bro , problem solved?
You can use the TWRP to flash the nvram.img. Go to the folder where the file is saved, there you can see an option in the bottom right corner "image file" select it and flash the image as nvram partition
panchowatkins said:
the same question! please?
got original rom, and other bin files corresponding to a7010a48 phone.
i enabled "nvram" on my scatter file, then, on the sp flash tool, always the 6045 error popups.
Click to expand...
Click to collapse
SPFlash tool can't Flash partitions other than the default listed ones directly. In the scatter file you can enble other partitions but it will not work. It will always give error 6045. Two flash other partitions using SPFlash tool, you will need to enter Advanced write mode. Here is how you can do it. But first revert to original scatter file.
Steps:-
1. Press CTRL + ALT + V to enable advanced write mode.
2. Open the advanced write mode (there will be an extra menu item under either option or main window menu.
Once you click that item, an extra tab will be added (write memory)
3. Go to newly added tab, select the partition you want to flash. Enter the starting address of the partition (get it from scatter file) you want to flash. Press start button. If you have correct drivers, the procedure should start within 10-15 seconds. Wait for the process to finish (you should see an ok dialog)
4. Disconnect and restart the phone. The first start may take slightly longer.
If the partition flashing file itself is corrupt, your phone may enter boot loop or stuck at the screen, so do backup your stuff
Hope it works for you
Thanks.
from where did u download?
rakitha ranathunga said:
I recently downloaded nvram.img of my lenovo k4 note.
Sp flashtool only flashing .bin files.
But i don't know how to flash img file.
Please someone help me...
Click to expand...
Click to collapse
from where did u download?
Need that nvrm .IMG filec
Could you send me to that file
Plz sir, i hv lost my phone imei n none of the methds are working plz help .. tge only option left is using nvram.img file and flashing via twrp.plz share it!
I downloaded this ROM in this link , but when I try to install with TWRP (my version is 3.2.1-1) show this fail message "Invalid zip file format".
What I supposed to do?
Rubtec said:
I downloaded this ROM in this link , but when I try to install with TWRP (my version is 3.2.1-1) show this fail message "Invalid zip file format".
What I supposed to do?
Click to expand...
Click to collapse
invalided zip can mean all sorts of things
The zip is corrupted - download the zip file again
The zip is not meant for your phone
You have incorrectly edited the zip
The updater script is incorrect
The update binary is not for your phone
The zip is not a flashable zip - look inside and make sure there is a META-INF folder - if not its definitely not a flashable zip