[Q] Custom Binaries - T-Mobile Samsung Galaxy S7 Edge Questions & Answer

I just rooted my s7 edge W/ this download https://www.youtube.com/watch?v=KawiIZ4bAV8 & my phone is broken @ the moment I need UR help please & thanx (the only screens I see R the samsung, t- mobile bootups & the redownload screens), so I went on 2 xda developers & youtube last nite & I think discovered their called custom binaries, but that's as far as I can get on my own, I need UR help 2 get the rest of the way & use my device 2 its full potential!!! So thanx & talk 2 some1 soon........ PS I'm on a different pc, so do I have 2 download the same software as be4??

Have you tried booting into recovery? If not, you'll need to do that and wipe cache then wipe data. That should get your phone booting up normally.

Related

Galaxy S4 problem

Dear all,
After using the S4 (Unlocked 9500) for 6 months, suddenly the phone suffered from the following:
- Network loss, not even emergency calls nor other network related matters are accessible, the phone shows the circle with the crossing line whether it has a sim card or not, I tried every single setting and none work. Also removed the micro sd.
- Flight mode can be enabled but can only be disabled from the settings and not from the startup menu
- Bluetooth cannot be disabled/enabled
- Phone not recognized by PC/ODIN even in download mode on several pcs
- Weird behavior where phone acts by itself
- Keyboard problem, you press a letter it presses the next letter and doesn't stop pressing.
- Reset phone from recovery works but clearing cache gives and error and restarts
Most probably the phone has a corrupted rom (radio/modem is lost along with several other problems) and I cannot root it and install a new rom since no access to the phone via PC/Odin and Mobile Odin needs root and root not available without PC.
Any advice?
first try a different rom, fresh install. if that doesnt work. return it and get another one.
U r using I9500 for 6 months ??? How is this possible ?
Sent from my GT-I9500 using XDA Premium 4 mobile app
Moisture exposure. Also, Kof200440 makes a valid point.
fadishehadeh said:
Dear all,
After using the S4 (Unlocked 9500) for 6 months, suddenly the phone suffered from the following:
- Network loss, not even emergency calls nor other network related matters are accessible, the phone shows the circle with the crossing line whether it has a sim card or not, I tried every single setting and none work. Also removed the micro sd.
- Flight mode can be enabled but can only be disabled from the settings and not from the startup menu
- Bluetooth cannot be disabled/enabled
- Phone not recognized by PC/ODIN even in download mode on several pcs
- Weird behavior where phone acts by itself
- Keyboard problem, you press a letter it presses the next letter and doesn't stop pressing.
- Reset phone from recovery works but clearing cache gives and error and restarts
Most probably the phone has a corrupted rom (radio/modem is lost along with several other problems) and I cannot root it and install a new rom since no access to the phone via PC/Odin and Mobile Odin needs root and root not available without PC.
Any advice?
Click to expand...
Click to collapse
it's easy..
almost same with me & others user around the globe. Just flash stock rom, make it official.
Just send to Samsung service Centre. Normally they will do some recovery on ur device, like mine last week. Then, S4 will back to normal.
kof200440 said:
U r using I9500 for 6 months ??? How is this possible ?
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Since released.
zaki aziz said:
it's easy..
almost same with me & others user around the globe. Just flash stock rom, make it official.
Just send to Samsung service Centre. Normally they will do some recovery on ur device, like mine last week. Then, S4 will back to normal.
Click to expand...
Click to collapse
I cant access the phone since it is not recognized by the pc whether in download or normal mode even Odin cannot recognize it. Anyway to install rom directly from phone without root? or even root the phone directly from the phone without pc? If I can root from phone i might be able to install mobile odin and flash a rom.
Also phone never rooted and has stock rom.
Same happened to me, i had backups with efs-pro (all partitions ticked) and nandroid backup. But i wasn't able to recover my imei & baseband. Brought it to samsung service center. they blamed me for rooting, but they had no proof because everthing was back to normal and no cutstom counters. they told me, no problem, we wil flashed it to orginal with emei. but after 3 hours, sorry it won't work. we have to sent it to samsung and replace motherboard.
Now my biggest concern, a lot of people complaning about there lost of emei and baseband. so what's happening ?
Cybertom said:
Same happened to me, i had backups with efs-pro (all partitions ticked) and nandroid backup. But i wasn't able to recover my imei & baseband. Brought it to samsung service center. they blamed me for rooting, but they had no proof because everthing was back to normal and no cutstom counters. they told me, no problem, we wil flashed it to orginal with emei. but after 3 hours, sorry it won't work. we have to sent it to samsung and replace motherboard.
Now my biggest concern, a lot of people complaning about there lost of emei and baseband. so what's happening ?
Click to expand...
Click to collapse
yupp..
when i sent to samsung service centre they do imei recovery.everything back to normal.i no idea why few digit of imei missing or hidden.
---------- Post added at 08:19 PM ---------- Previous post was at 08:15 PM ----------
fadishehadeh said:
I cant access the phone since it is not recognized by the pc whether in download or normal mode even Odin cannot recognize it. Anyway to install rom directly from phone without root? or even root the phone directly from the phone without pc? If I can root from phone i might be able to install mobile odin and flash a rom.
Also phone never rooted and has stock rom.
Click to expand...
Click to collapse
so..ur S4 still official status.
don't let ur head get sick better send it to samsung.
Currently I cant reach samsung, I need to solve it myself.
Can I install a stock rom from stock recovery? Where to get a signed stock rom?
Can I install cwm without rooting and from cwm flash a rom?
Can I root without a pc using an apk?
Any help is appreciated.
Thx
Sent from my GT-I9300 using Tapatalk 4

[Q] G900S outside Korea

Hi,
i bought an unlocked galaxy S5 SM-G900S (SK telecom), 32 Gb..
It's a wonderful phone but it seems that it is half locked:
cannot update OTA if no korean sim card is in the phone.
my phone always thinks that it's roaming.. i always have 2 clocks (home and local).
in the call settings, there is no call forward or divert.
no way to make a 3 way call (conference call) as the "merge" button isn't there. I can only swap calls.
i can live with everything mentioned above except the conference call lacking; it is very very important to my work.
i tried to flash the international firmware G900F but it kept failing; when i flashed the G900S firmware it went very smoothly.
my question:
anyone else with this problem? any developer has any idea about what should be done.
what bothers me i may need to sell the only 32gb version available (as far as i know) just for one setting.
Appreciate any reply or help;
Regards,
Ditto
I don't have a solution. I share the same concern as mentioned by you. Wondering if you found a solution!!?
Firmware Upgrade Available
Same error - but now there is a firmware upgrade. Lets see what happens.
Still not working
BuntyRulz said:
Same error - but now there is a firmware upgrade. Lets see what happens.
Click to expand...
Click to collapse
Just checked it out with the new firmware... appreciable performance improvement, however no conference ability as of yet. I tried to flash some custom roms, however the recovery image is just not getting uploaded.
So still stuck with everything as it was before..
Obtained Clockwork Mod - Merge obtained
BuntyRulz said:
Just checked it out with the new firmware... appreciable performance improvement, however no conference ability as of yet. I tried to flash some custom roms, however the recovery image is just not getting uploaded.
So still stuck with everything as it was before..
Click to expand...
Click to collapse
Update - Just got the clockwork update for this model :
Download from here, choose the right blue button to download.
http://pan.baidu.com/wap/album/file?uk=704970239&album_id=6031394112765541086&fsid=1098522244643130
After you download the clockwork mod - do the following :
(1) Download the XtreStoLite v.1.1.3 ROM
- http://forum.xda-developers.com/showthread.php?t=2732110
(2) Ensure that you have the ROM on an external sd card and that you have put that inside your device
(3) Install the clockwork recovery via Odin 3.7 version
(4) Power down after above step
(5) Press the Volume UP + HOME + Power button to start in the recovery mode
(6) Wipe the data clean
(7) Install the ROM from the SD card - this will be interactive and self explanatory ( choose the 900L model )
(8) Restart and everything will be in the format you want... AND OF COURSE MERGE IS BACK
Thanks & Regards,
BuntyRulz
(Would have posted this in the developers page, but not enough points :crying: )
BuntyRulz said:
Update - Just got the clockwork update for this model :
Download from here, choose the right blue button to download.
http://pan.baidu.com/wap/album/file?uk=704970239&album_id=6031394112765541086&fsid=1098522244643130
After you download the clockwork mod - do the following :
(1) Download the XtreStoLite v.1.1.3 ROM
- http://forum.xda-developers.com/showthread.php?t=2732110
(2) Ensure that you have the ROM on an external sd card and that you have put that inside your device
(3) Install the clockwork recovery via Odin 3.7 version
(4) Power down after above step
(5) Press the Volume UP + HOME + Power button to start in the recovery mode
(6) Wipe the data clean
(7) Install the ROM from the SD card - this will be interactive and self explanatory ( choose the 900L model )
(8) Restart and everything will be in the format you want... AND OF COURSE MERGE IS BACK
Thanks & Regards,
BuntyRulz
(Would have posted this in the developers page, but not enough points :crying: )
Click to expand...
Click to collapse
I plan to buy this in India. Would the phone still show in roaming? After flashing the custom firmware ?
Yes...
hellboy13 said:
I plan to buy this in India. Would the phone still show in roaming? After flashing the custom firmware ?
Click to expand...
Click to collapse
After flashing the ROM everything comes back to normal. I had a Vodafone connection(this is showing up and not the HTMPL or some weird connection) and everything is working fine including the 3G and Roaming. The roaming problem was occurring only with the Korean firmware. After applying the ROM, your model will show as 900L and not 900S. The L model basically works like any normal phone in India.
Faced only two problems so far :
(1) Kies does not sync. So ensure that you have an application like Superbackup for your contacts and what-not.
(2) The OK-google now talk functionality on the home screen goes away. You can get this back by installing the google launcher, but I like the touchwiz UI a bit better, so decided to do away with it.
Rest everything is good and the speed has also increased.
PS - Considering you are getting a 30 % discount on the korean phone based on the indian price(I took it a month back at 22 % Dis.), its totally worth it. You might spend a day cracking the phone, but then 30% savings is more than enough to make up for it.
Hai Bunty, Just one question.
After installing L rom, have you tried installing any other L roms or KLTE roms like Slim Rom or AOKP or Carbon rom
I'm getting my S model phone next week and never wanted to end up having only few roms.
Sorry one more,
Has the conference and call forward or divert issue sorted after installing custom rom
BuntyRulz said:
After flashing the ROM everything comes back to normal. I had a Vodafone connection(this is showing up and not the HTMPL or some weird connection) and everything is working fine including the 3G and Roaming. The roaming problem was occurring only with the Korean firmware. After applying the ROM, your model will show as 900L and not 900S. The L model basically works like any normal phone in India.
Faced only two problems so far :
(1) Kies does not sync. So ensure that you have an application like Superbackup for your contacts and what-not.
(2) The OK-google now talk functionality on the home screen goes away. You can get this back by installing the google launcher, but I like the touchwiz UI a bit better, so decided to do away with it.
Rest everything is good and the speed has also increased.
PS - Considering you are getting a 30 % discount on the korean phone based on the indian price(I took it a month back at 22 % Dis.), its totally worth it. You might spend a day cracking the phone, but then 30% savings is more than enough to make up for it.
Click to expand...
Click to collapse
Well thanks for the info. Get it for 37k. Now am sure to get this.
BuntyRulz said:
After flashing the ROM everything comes back to normal. I had a Vodafone connection(this is showing up and not the HTMPL or some weird connection) and everything is working fine including the 3G and Roaming. The roaming problem was occurring only with the Korean firmware. After applying the ROM, your model will show as 900L and not 900S. The L model basically works like any normal phone in India.
Faced only two problems so far :
(1) Kies does not sync. So ensure that you have an application like Superbackup for your contacts and what-not.
(2) The OK-google now talk functionality on the home screen goes away. You can get this back by installing the google launcher, but I like the touchwiz UI a bit better, so decided to do away with it.
Rest everything is good and the speed has also increased.
PS - Considering you are getting a 30 % discount on the korean phone based on the indian price(I took it a month back at 22 % Dis.), its totally worth it. You might spend a day cracking the phone, but then 30% savings is more than enough to make up for it.
Click to expand...
Click to collapse
check pm
I have the same phone , and I ask this because I don't know so much about this **** : If I change the ROM , i can reach the download mode and service mode in english ? because right now is in koreean , and btw i can go in download mode . If you have time, aamir2day , please send me a PM with the step that I must do to resolve this problem . Thank you in advance !
Hi,
You should be able to access everything even before changing the ROM. I only changed the ROM as I wanted the conference call facility. If you are fine without that I would suggest to just change the language in the first screen of the boot up and then use the standard ROM that Samsung provides. You will be getting kies updates everytime samsung makes the new ROM available.
marianbot said:
I have the same phone , and I ask this because I don't know so much about this **** : If I change the ROM , i can reach the download mode and service mode in english ? because right now is in koreean , and btw i can go in download mode . If you have time, aamir2day , please send me a PM with the step that I must do to resolve this problem . Thank you in advance !
Click to expand...
Click to collapse
do you know how i change the language ? because when i push the power+vol down+ home i can go in the download mode , i have some koreean think , and I don't know how to change . Thank you for the help .
Cant get to download mode it goes in some mode and all options are in korean its not recovery mode either

[Q] HELP!!!! note 3 bootloop

Hello everyone,
i am fairly new to the world of rooting and recently encountered a problem while flashing a rom
i have the at&t samsung galaxy note 3 N-900A running 4.3 jellybean (2 year contract expired and i got and used the unlock code)
i rooted the phone using the kingo root app, because i could not update the phone (I recently moved out of the USA so i cant connect to an at&t server to update)
i installed safestrap recovery 3.71 and it was running fine
i found a tutorial from galaxy note 3 root for the knoxraid ro
(put youtube. c o m here) /watch?v=8HDHt4xSnQY
according to the tutorial i had to install the rom over the stock rom file
so i copied the stock rom to rom slot 1
this is where i messed up, i installed the knoxraid rom over the stock rom without wiping/data factory reset first. But it gets worse, i realized i forgot to wipe the data from safestrap so before the install was even halfway completed, i pulled the battery out.
now whenever i turn it on it will go straight to recovery mode
it wont even turn off. i have to pull the battery out.
i can get to download mode and recovery mode but thats it.
im not sure about the build number because it wont boot up
all i can tell you is it is a at&t note 3 running 4.3 jellybean
please help if you can
btw: my computer wont recognize the phone because it says the PHONE does not have the correct drivers installed
however odin still recognizes it with the blue box with 0:[COM6] if that helps
so yeah please help me the phone is fairly new and i dont want to waste $600
infinitephase said:
Hello everyone,
i am fairly new to the world of rooting and recently encountered a problem while flashing a rom
i have the at&t samsung galaxy note 3 N-900A running 4.3 jellybean (2 year contract expired and i got and used the unlock code)
i rooted the phone using the kingo root app, because i could not update the phone (I recently moved out of the USA so i cant connect to an at&t server to update)
i installed safestrap recovery 3.71 and it was running fine
i found a tutorial from galaxy note 3 root for the knoxraid ro
(put youtube. c o m here) /watch?v=8HDHt4xSnQY
according to the tutorial i had to install the rom over the stock rom file
so i copied the stock rom to rom slot 1
this is where i messed up, i installed the knoxraid rom over the stock rom without wiping/data factory reset first. But it gets worse, i realized i forgot to wipe the data from safestrap so before the install was even halfway completed, i pulled the battery out.
now whenever i turn it on it will go straight to recovery mode
it wont even turn off. i have to pull the battery out.
i can get to download mode and recovery mode but thats it.
im not sure about the build number because it wont boot up
all i can tell you is it is a at&t note 3 running 4.3 jellybean
please help if you can
btw: my computer wont recognize the phone because it says the PHONE does not have the correct drivers installed
however odin still recognizes it with the blue box with 0:[COM6] if that helps
so yeah please help me the phone is fairly new and i dont want to waste $600
Click to expand...
Click to collapse
Well, this is the wrong forum to begin with.
However, head over here, http://forum.xda-developers.com/showthread.php?t=2703006 , and read very, very carefully.
sirobelec said:
Well, this is the wrong forum to begin with.
However, head over here, http://forum.xda-developers.com/showthread.php?t=2703006 , and read very, very carefully.
Click to expand...
Click to collapse
sorry, next time ill post in the right forum
thanks for the link, however this appears to be for the N900AUCUCNC2 variant, which i believe is KitKat (sry if im wrong) i need files for 4.3 jellybean firmware. (i never updated)
thanks in advance

Tutorial: How to get data working on sprint g900p S5 GSM

WARNING: DO THIS AT YOUR OWN RISK , I AM NOT RESPONSIBLE FOR BRICKED DEVICES OR LOOPING DEVICES , IF YOU ARE GOING TO TRY THIS BE SURE TO KNOW WHAT YOU'RE DOING BEFORE ATTEMPTING
First of all this is my very first post on the community, i dont usually post here but since i have been on here since the times of the motorola droid 2 i might as well post this thing that i did to help me sort the problem with the data on the galaxy s5
Things that i used:
TWRP Recovery installed via TWRP Manager from playstore
Galaxy s5 4.4.2 already rooted via kingoroot ( You can use any other method that you prefer)
Shohat ROM V5 http://forum.xda-developers.com/showthread.php?t=2719386 (All credits go directly to Shohat for this amazing rom)
Build prop editor (You can get it from playstore)
cm-11-20140919-UNOFFICIAL-klte (This is available for download at androidhost here http://d-h.st/niU , all credits go to Albinoman887 for uploading that file and to cyanogen for making that build)
SSU.APK http://forum.xda-developers.com/spr...print-samsung-unlocker-unlock-sprint-t2928250 (All credits go to aalyatim for making this wonderful app)
Patience
Lets begin
First off all you got to root the phone , i used kingoroot as its one of the fastest and easiest method to root your device , it even gives you on screen steps for doing the rooting process
Next once the device has been successfully rooted we are going to go on ahead and download TWRP Manager from playstore, install it and install the recovery on your phone ( If you already have it or if you have a diferent method to install it theres not a problem)
Next once the recovery has been installed we are going to unlock the phone by using SSU.apk and just installing the app and running it (If you have already unlocked the phone there is no need to install the unlock again)
Next once the phone has been successfully unlocked we are going to be doing the next step, download build prop editor from playstore , give root priviliges to it , go to the edit option ( Small pencil located at the bottom right of the screen ) and scroll down all the way to the bottom, once here type in the following:
ril.sales_code=LOL
ro.csc.sales_code=LOL
Once you have that in , we are going to save it by going to the top right and clicking the floppy disk and waiting for it to save build prop
Next step will be turning off device and entering recovery mode ( You can google how to access recovery mode ) , once inside recovery we are going to be doing the following , since im using TWRP i went to WIPE, then FACTORY RESET , after that i went to ADVANCED WIPE , and checked dalvik cache , system, data, cache i got an error on trying to write something but thats normal
Next step was installing the cm-11-20140919-UNOFFICIAL-klte that you previously downloaded on the steps below , install gapps if you want but it wont be necessary , once thats install and the phone boots you will be able to see the H+, 3g or the connection that you have on your area based on your gsm provider
Now in case you want to stop here and stay with cyanogen you can do it , but if you want to have the stock fresh look of S5 TouchWiz then we are going to do next steps
Once thats done we are going to be accessing recovery once more , once inside we are going to be doing the exact same process that we did before i went to WIPE, then FACTORY RESET , after that i went to ADVANCED WIPE , and checked dalvik cache , system, data, cache i got an error on trying to write something but thats normal
Next we will be installing the rom Shohat ROM V5 once it begins, it takes a while for it to finish , do not restart your device until its done even if it appears its not doing anything , once install reboot the device , you will wait a moment for it to load, once loaded you will be getting the samsung galaxy welcome screen , complete all of the steps to finish the setup and youre done , if you dont see the H+ sign or the signal , just check that your apn are there and were done
I Have tried with AT&T and with a foreign carrier in mexico and it worked great
I have attached pictures with proof , i took it with my camera so it doesn look edited or anything , i hope this helps you out as it helped me
work for s5 sprint g900p??
This may enable the sprint samsung galaxy s5 version G900P get signal H +????
lololo619 said:
I Have tried with AT&T and with a foreign carrier in mexico and it worked great
Click to expand...
Click to collapse
Are you saying the phone picked up signal with an AT&T SIM here in the US...?
As far as I know, this doesn't work on the G900P for domestic use. It probably worked for the OP because he's in Mexico (or I've just molested my G900P so much it's not picking up any GSM networks).
ecs87 said:
As far as I know, this doesn't work on the G900P for domestic use. It probably worked for the OP because he's in Mexico (or I've just molested my G900P so much it's not picking up any GSM networks).
Click to expand...
Click to collapse
Bahaha - better get on that
I figured it was a super long shot, just asking him to clarify. I'm subscribed to every thread on Sprint Samsung unlocking, and from your posts (and others'), it's clearly deeper than ROM level. A guy can dream though ^__^
Doesn't work for t-mobile
DimVim said:
Doesn't work for t-mobile
Click to expand...
Click to collapse
Duh
@lololo619 might wanna put a disclaimer about US GSM use in the OP
I hope the OP sees this.
Did you have problems with the "Unable to establish a wireless data connection LTE: ESM-29 EMM-X" with correct APN before and this fixed it? Thanks for posting
Your Solution Worked!!!
Thank you so much.
I can confirm that this WORKS!!!
I was heart broken after I unlocked the phone and could not get data on Digicel Dominica (in the Caribbean) even with the correct APN settings. I googled for some time until I found your post. After reading the comments on this post, I did not have much hope but as they say "nothing beats a try" and so I followed your instructions and VOILA...
Thanks again Bro...:good:
iBowToAndroid said:
Bahaha - better get on that
I figured it was a super long shot, just asking him to clarify. I'm subscribed to every thread on Sprint Samsung unlocking, and from your posts (and others'), it's clearly deeper than ROM level. A guy can dream though ^__^
Click to expand...
Click to collapse
I got on it. Restored the efs data partitions And performed the note 3 domestic unlock steps and dest's (sorry buddy, I only remember your original username!) international unlock app. I then modified the build.prop as much as I could to the Verizon build (G900V). I can see T Mobile and AT&T networks when searching with a valid T Mobile SIM in, but cant connect obviously. The invalid SIM notification would have to be legitimately removed before one could even consider registering onto the network. I...just want to take a peek at nv item 10124
Sent from my LGLS990 using XDA Free mobile app
ecs87 said:
I got on it. Restored the efs data partitions And performed the note 3 domestic unlock steps and dest's (sorry buddy, I only remember your original username!) international unlock app. I then modified the build.prop as much as I could to the Verizon build (G900V). I can see T Mobile and AT&T networks when searching with a valid T Mobile SIM in, but cant connect obviously. The invalid SIM notification would have to be legitimately removed before one could even consider registering onto the network. I...just want to take a peek at nv item 10124
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah I remember seeing 10124 mentioned. It'll be interesting to see what form DSU takes. It's obviously still an OTA process instead of a code but I'm curious as to how different it is from the current international method
iBowToAndroid said:
Yeah I remember seeing 10124 mentioned. It'll be interesting to see what form DSU takes. It's obviously still an OTA process instead of a code but I'm curious as to how different it is from the current international method
Click to expand...
Click to collapse
Its just another IPC command called over RIL I bet. If you followed the ORIGINAL author of the international unlock's post he drops the hint on what IPC command was called. I was able to decompile his app, change the IPC command and relock the phone, confirming that the phone is indeed locked using this method instead of directly accessing the nv items over the QC diag port. We are able to log the international unlock process if you know how to set the debugging levels high enough. With a domestic unlock on the horizon via OTA, it shouldn't be long before the domestic unlock back is public.
Sent from my LGLS990 using XDA Free mobile app
Hi, hope you're doing fine.
lololo619 said:
WARNING: DO THIS AT YOUR OWN RISK , I AM NOT RESPONSIBLE FOR BRICKED DEVICES OR LOOPING DEVICES , IF YOU ARE GOING TO TRY THIS BE SURE TO KNOW WHAT YOU'RE DOING BEFORE ATTEMPTING
First of all this is my very first post on the community, i dont usually post here but since i have been on here since the times of the motorola droid 2 i might as well post this thing that i did to help me sort the problem with the data on the galaxy s5
Things that i used:
TWRP Recovery installed via TWRP Manager from playstore
Galaxy s5 4.4.2 already rooted via kingoroot ( You can use any other method that you prefer)
Shohat ROM V5 http://forum.xda-developers.com/showthread.php?t=2719386 (All credits go directly to Shohat for this amazing rom)
Build prop editor (You can get it from playstore)
cm-11-20140919-UNOFFICIAL-klte (This is available for download at androidhost here http://d-h.st/niU , all credits go to Albinoman887 for uploading that file and to cyanogen for making that build)
SSU.APK http://forum.xda-developers.com/spr...print-samsung-unlocker-unlock-sprint-t2928250 (All credits go to aalyatim for making this wonderful app)
Patience
Lets begin
First off all you got to root the phone , i used kingoroot as its one of the fastest and easiest method to root your device , it even gives you on screen steps for doing the rooting process
Next once the device has been successfully rooted we are going to go on ahead and download TWRP Manager from playstore, install it and install the recovery on your phone ( If you already have it or if you have a diferent method to install it theres not a problem)
Next once the recovery has been installed we are going to unlock the phone by using SSU.apk and just installing the app and running it (If you have already unlocked the phone there is no need to install the unlock again)
Next once the phone has been successfully unlocked we are going to be doing the next step, download build prop editor from playstore , give root priviliges to it , go to the edit option ( Small pencil located at the bottom right of the screen ) and scroll down all the way to the bottom, once here type in the following:
ril.sales_code=LOL
ro.csc.sales_code=LOL
Once you have that in , we are going to save it by going to the top right and clicking the floppy disk and waiting for it to save build prop
Next step will be turning off device and entering recovery mode ( You can google how to access recovery mode ) , once inside recovery we are going to be doing the following , since im using TWRP i went to WIPE, then FACTORY RESET , after that i went to ADVANCED WIPE , and checked dalvik cache , system, data, cache i got an error on trying to write something but thats normal
Next step was installing the cm-11-20140919-UNOFFICIAL-klte that you previously downloaded on the steps below , install gapps if you want but it wont be necessary , once thats install and the phone boots you will be able to see the H+, 3g or the connection that you have on your area based on your gsm provider
Now in case you want to stop here and stay with cyanogen you can do it , but if you want to have the stock fresh look of S5 TouchWiz then we are going to do next steps
Once thats done we are going to be accessing recovery once more , once inside we are going to be doing the exact same process that we did before i went to WIPE, then FACTORY RESET , after that i went to ADVANCED WIPE , and checked dalvik cache , system, data, cache i got an error on trying to write something but thats normal
Next we will be installing the rom Shohat ROM V5 once it begins, it takes a while for it to finish , do not restart your device until its done even if it appears its not doing anything , once install reboot the device , you will wait a moment for it to load, once loaded you will be getting the samsung galaxy welcome screen , complete all of the steps to finish the setup and youre done , if you dont see the H+ sign or the signal , just check that your apn are there and were done
I Have tried with AT&T and with a foreign carrier in mexico and it worked great
I have attached pictures with proof , i took it with my camera so it doesn look edited or anything , i hope this helps you out as it helped me
Click to expand...
Click to collapse
Is there a way I can go back to a Stock Rom and keep my data working?
Btw, thanks for this excellent post. Works very finee!!!:good::good::good:
cm-11-20140919-UNOFFICIAL-klte.zip (226.23 MB) link not working .. another link please
---------- Post added at 08:35 PM ---------- Previous post was at 08:28 PM ----------
Download now button not working
Download button downloads a virus
Data working now on CM11
ShohatRom_S5_G900F_V5 not working on NK4 bootloader ( 4.4.4 ) .. what touchwiz ROM should i use ?
aamszia said:
Data working now on CM11
ShohatRom_S5_G900F_V5 not working on NK4 bootloader ( 4.4.4 ) .. what touchwiz ROM should i use ?
Click to expand...
Click to collapse
I dropped to NE (4.4.2) to get it to work. It has everything I want expect wifi calling. I have the same question if there a 4.4.4 touchwiz rom (or 4.4.2 with wifi calling) that works with this.
Thanks OP!
is fingerprint working in shohat rom? mine is not working, NFC either...
Thanks!
shohat rom working on 4.4.4 ( NK4 ) ? i only got black screen ...
I can confirm that this really works.
Thanks bro for this wonderful job.
Sent from my SM-G900F using XDA Free mobile app
This really works, thanks. I can confirm that the method work in 4.4.4 using cm11 but shohatrom don't work so if you want touchwiz you should use xtrestolite rom (that one works)

[rom] [android 5.1] [lollipop] [cm12.1 unofficial] galaxy s3 alpha sc-03e ntt docomo

DISCLAIMER: YOU WILL BE FLASHING YOUR PHONE AT YOUR OWN RISK. YOU ARE SOLELY RESPONSIBLE FOR ANYTHING YOU DO TO YOUR PHONE, SO MAKE SURE YOU ARE WELL INFORMED AND WELL PREPARED BEFORE DECIDING TO FLASH OR INSTALL ANYTHING ON YOUR DEVICE.
I created this thread with the sole aim of helping the owners of the Japanese SAMSUNG GALAXY ALPHA SC-03E NTT DOCOMO to install the latest version of Android (LOLLIPOP) on their devices without much hassle. All updates will be provided in the future.
REQUIREMENTS
1. A properly functioning SAMSUNG GALAXY ALPHA SC-03E NTT DOCOMO. We don’t want to receive any feedback from users with faulty phones.
2. FULLY CHARGED BATTERY. This is to prevent the phone from going off in the flashing process
3. A CUSTOM RECOVERY installed.
If you don’t have one download Sc03e-KK-KBC-CWM-v6.0.5.1_r2-recovery and install with Odin with same
a. Hold the Power Button + Volume Down + Home at the same time. Your phone will enter Download Mode.
b. Now connect your phone to the PC via USB cable whiles Odin is opened.
c. Now in Odin click the PDA button and open the Rom that you downloaded earlier.
d. Make sure F.Reset time and Auto reboot are all ticked
e. Now click Start button and wait for it to display PASS at the top left corner. Your Phone might restart a few times.
f. If you have an NK2 rom go check this thread on how to root it.
NOTE: If you have an older CWM installed, update to this one.
THINGS TO DOWNLOAD
1. ANDROID LOLLIPOP ROM 5.1 http://site.kbc-brick.org/samsung/sc03e/sc03e_rom_cm12-1]CM12.1 UNOFFICIAL[/URL]
2. GOOGLE APP ...
INSTALLING THE LOLLIPOP ROM
1. Copy the downloaded files and place them in the phone memory or SD card(recommended)
2. BACKUP your current OS in the recovery menu so that you can restore it if you encounter any problems in the flashing process.
3. To Enter the recovery menu, turn off your phone completely. PRESS and HOLD the POWER button + Volume UP + HOME button at the same time . When DOCOMO is displayed leave the power button and still keep holding the other buttons.
4. In recovery, use volume buttons to navigate and Power to select. Now go to wipe data/factory reset and wipe data, then wipe cache partition , then go to advanced and wipe Dalvic cache.
5. When all is done go to install zip and install the cm-12.1-2015xxxx-UNOFFICIAL-sc03e.zip first.
6. When done install the GAPPS package.
NOTE: IF YOU HAVE CWM 6.0.4.7 THE GAPPS PACKAGE WONT INSTALL.
7. Now go back and wipe data , cache partition and Dalvic cache again then reboot. Upon exiting CWM you will be asked to fix your root binaries... say yes!
8. Your phone will boot into Android L with a Cyanogen boot animation.
9. Set up you phone and make sure to update all your Google apps and viola! :good:
NOTE: You will have to enable root in developer options.. enable it by tapping build number several times
future
- wifi
- sound / vibration
- Bluetooth
- base-band
- sensors
- GPS
- Felica (Osaifu-kaitai)
Source
kernel: https://github.com/kbc-developers/kernel_samsung_exynos4412
device : https://github.com/kbc-developers/android_device_samsung_sc03e
reserved
Changelog:
20150422 : Android 5.1.1
20150418 : memorial of cm team stating cm-12.1 nightly ( not for this device )
20150415 : change rom name to AOJP
20150408 : Fix FelicaLock crash
20150406: Support Felica (Osaifu-kaitai)
20150404: First
reserved2
reserved
HELLLLPPP PLEASE, USSD IS IN CHINESE AND SHOWS THE ROAMING SIGN "R" PERMANENTLY.. EVEN WHEN DATA IS ON IT DOESN'T SHE WHETHER EDGE OR 3G OR H ALWAYS R..
PLEEASE HELP MOST IMPORTANT IS USSD
Sent from my SC-03E using XDA Free mobile app
What is the USSD?
I don't know it.
I'm using Docomo SIM.
It seems no problem.
ma34S said:
What is the USSD?
I don't know it.
I'm using Docomo SIM.
It seems no problem.
Click to expand...
Click to collapse
thanks for MA34S's great work
whats new about 5.1? can i flash the cm12.1 over 12.0?
bug report:
The folder displays nothing.
I put 2 icons on the screen together to create a folder. When I open the folder, There's nothing.
When I move the folder to another place. The icons in ther folder are visible once. When I opened twice, the icons are still invisible.
Thanks for your great job! That's really unbelievable that I can use the newest lollipop on my old sc03e. Everything seems to work perfectly except the sound when make a call. I know my listening is not good enough, but the effect of call is not as good as the original system. Could you please make some more efforts to improve this?
Many thanks!
My device will lost the data access of mobile network(GSM edge), especially after the device sleep for a time.
The apn is set and the switch is on, but it's disconnected.
It occurs since cm-12-20150328-UNOFFICIAL-sc03e.zip, cm-12-20150320-UNOFFICIAL-sc03e.zip is ok.
Is there anyone has the same problem.
20150415 is great,thanks for your great job!
Everything seems to work perfectly except the BT, the BT can link to a iphone but sent picture failed
Please keep work for 5.1
USSD code chines
hallo i am from indonesia , please help after flashing this rom all is ok but USSD code change to china or i don;t no. this importan for me.
thx imam:good::good::good:
libinneed said:
bug report:
The folder displays nothing.
I put 2 icons on the screen together to create a folder. When I open the folder, There's nothing.
When I move the folder to another place. The icons in ther folder are visible once. When I opened twice, the icons are still invisible.
Click to expand...
Click to collapse
my device is not shown it....
try again with recent version please.
imamsyafiino01 said:
hallo i am from indonesia , please help after flashing this rom all is ok but USSD code change to china or i don;t no. this importan for me.
thx imam:good::good::good:
Click to expand...
Click to collapse
Sorry I don't know what it is.
cm-12.1-20150422-AOJP-NIGHTLY-sc03e released
you can download my site via OP.
imamsyafiino01 said:
hallo i am from indonesia , please help after flashing this rom all is ok but USSD code change to china or i don;t no. this importan for me.
thx imam:good::good::good:
Click to expand...
Click to collapse
this happened when the developer changed the rom into kitkat RIL.. help us cos ussd code is very important to us like we use it to check our prepaid balance..
hi! am new in xda. where can we download this? Thanks!
ma34S said:
you can download my site via OP.
Click to expand...
Click to collapse
hi! am new in xda. where can we download this? Thanks!
@ma34S could you build a sc03e 4.4.4 kernel for sc03e to use 4.4.4 i9305 touchwiz based rom?
Sometimes, camera is not working..
Camera is not available or not working at some time, is it a bug? in order for camera to work again i need to restart my phone.. can you fix it plz..
anyway, it's a good custom ROM for SC-03E..
great job! but i think that team ub's 5.1.1 rom is the best

Categories

Resources