i am using a S160 android v.4.4.4 and installed " Here wego " maps app
i found 2 problems :-
1- when i enter the settings tab i see a blank page without any choices...
2- the part of downloading maps doesn't appeare
anyone has the same problem??
is there a solution for these problems ?
thanks...
You could try changing dpi to 160.
Same thing here...I installed it on my phone, downloaded the maps I wanted, and copied them over to my HU. They're in a hidden directory, I forget the name ATM.
The settings were blank too but you can get to them by tapping the bottom of the screen in navigation mode I think.
Not ideal, but it works...
sinnedone said:
You could try changing dpi to 160.
Click to expand...
Click to collapse
How can i do that??
Andromeda_Station said:
Same thing here...I installed it on my phone, downloaded the maps I wanted, and copied them over to my HU. They're in a hidden directory, I forget the name ATM.
The settings were blank too but you can get to them by tapping the bottom of the screen in navigation mode I think.
Not ideal, but it works...
Click to expand...
Click to collapse
Thank you
I will try that way and if i found any problem i will tell you
i think the settings thing is a common issue on these android head units. I know i didn't see it on my Joying. I was able to download maps though.
as a slight workaround, when you are in the map, driving somewhere, you can access settings there
mmdbdw said:
How can i do that??
Click to expand...
Click to collapse
You need to be rooted. Then install any of the dpi changing apps on the play store. You can also install "xposed" and use "app settings" module.
sinnedone said:
You need to be rooted. Then install any of the dpi changing apps on the play store. You can also install "xposed" and use "app settings" module.
Click to expand...
Click to collapse
Will xposed app change the app dpi??
I checked where the maps are stored, if changing the DPI doesn't work for you and you need to copy them over from another device.
They are in 'sdcard/Android/data/com.here.app.maps/files/.here-maps/diskcache-v4'
...I just copied the whole directory over. After moving one map you should be able to see the 'download' button on the head unit.
As mentioned, the settings can be accessed by tapping the bottom of the screen in 'drive' or 'navigation' mode.
Andromeda_Station said:
I checked where the maps are stored, if changing the DPI doesn't work for you and you need to copy them over from another device.
They are in 'sdcard/Android/data/com.here.app.maps/files/.here-maps/diskcache-v4'
...I just copied the whole directory over. After moving one map you should be able to see the 'download' button on the head unit.
As mentioned, the settings can be accessed by tapping the bottom of the screen in 'drive' or 'navigation' mode.
Click to expand...
Click to collapse
Thanks
I will check it out
sinnedone said:
You need to be rooted. Then install any of the dpi changing apps on the play store. You can also install "xposed" and use "app settings" module.
Click to expand...
Click to collapse
I used app setting module and tried to change dpi but nothing happened
Andromeda_Station said:
I checked where the maps are stored, if changing the DPI doesn't work for you and you need to copy them over from another device.
They are in 'sdcard/Android/data/com.here.app.maps/files/.here-maps/diskcache-v4'
...I just copied the whole directory over. After moving one map you should be able to see the 'download' button on the head unit.
As mentioned, the settings can be accessed by tapping the bottom of the screen in 'drive' or 'navigation' mode.
Click to expand...
Click to collapse
I logged into that path and found it empty
mmdbdw said:
I used app setting module and tried to change dpi but nothing happened
Click to expand...
Click to collapse
Just to double check, xposed installer is installed and functioning?
App settings is ticked on in xposed settings?
After finding your app in app settings, dpi is set to 160 then you hit save at the top of app?
If you did all that correctly you should see a difference in window/text size on the application you are trying to display correctly. Try different dpi settings between 160-240.
sinnedone said:
Just to double check, xposed installer is installed and functioning?
App settings is ticked on in xposed settings?
After finding your app in app settings, dpi is set to 160 then you hit save at the top of app?
If you did all that correctly you should see a difference in window/text size on the application you are trying to display correctly. Try different dpi settings between 160-240.
Click to expand...
Click to collapse
my device S160 must be rooted first before using app setting to change the dpi??
mmdbdw said:
I logged into that path and found it empty
Click to expand...
Click to collapse
On your head unit, right?
If you install Here on your phone and download maps they should be there and then you can copy them from your phone to your head unit with a USB stick or SD card or whatever.
mmdbdw said:
my device S160 must be rooted first before using app setting to change the dpi??
Click to expand...
Click to collapse
Yes your device must be rooted.
sinnedone said:
Yes your device must be rooted.
Click to expand...
Click to collapse
Would you mind if you tell me how to root my HU?
I also tried to activate the settings of "Here WeGo", without success.
The autoradio is rooted, flashed: Malaysk Custom ROM PX3 2GB for MTCD v1.0
Here are some pictures:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can someone help me?
Can nobody really help me?
Related
hi guyz
After rooting using CWM Based Recovery now having trouble with google play. After rooting google play was working fine. Suddenly now my google play shows No Connection error message. I'm using 4G also tried wifi. I dont use any firewall apps.
So far tried -
Rebooting
Uninstalling Updates
Clear Cache / Clear Data. Still its not loading
Anyone?
Thanks
sam20e said:
hi guyz
After rooting using CWM Based Recovery now having trouble with google play. After rooting google play was working fine. Suddenly now my google play shows No Connection error message. I'm using 4G also tried wifi. I dont use any firewall apps. I even uninstalled the google play update. Still no luck
Anyone?
Thanks
Click to expand...
Click to collapse
Screenshot attached
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm not getting that issue, I'm also rooted and using the cwm recovery. Try removing your Google account restart your phone, then re-add it, see if it works
Sent from my SM-N900T using xda app-developers app
Is your device time set correctly? Mine does this whenever I fiddle with the clock and the time ends up not matching that of the Gplay server...
ShadowLea said:
Is your device time set correctly? Mine does this whenever I fiddle with the clock and the time ends up not matching that of the Gplay server...
Click to expand...
Click to collapse
Good call, I totally forgot about the time problem..... Looking at the screen cap time and the posting time.... Looks like his AM and PM is mixed up... Or he's 24 hours off.
Sent from my SM-N900T using xda app-developers app
Thanks guys for the reply but I resolved this issue by tampering the hosts file.
OP and credit goes to : http://forum.xda-developers.com/showthread.php?t=2273994
1. Download Total Commander from Play Store.
2. Install it in your Device.
3. Open Total Commander and goto Root of System. (/ )
4. Open the etc folder.
5. Find the file named "hosts", and hold it for 3 seconds. Choose edit file, and choose Total Commander Text Editor if prompted.
6. Delete everything and paste this at the first line: " 127.0.0.1 localhost". Copy it exactly, dont modify anything.
7. Save the file and overwrite if needed.
lennie said:
Good call, I totally forgot about the time problem..... Looking at the screen cap time and the posting time.... Looks like his AM and PM is mixed up... Or he's 24 hours off.
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
No, he's in GMT+8, that much is correct. (The forum displays your own timezone as the posting time.) But it does appear to be off by about 10 minutes.
sam20e said:
Thanks guys for the reply but I resolved this issue by tampering the hosts file.
OP and credit goes to : http://forum.xda-developers.com/showthread.php?t=2273994
1. Download Total Commander from Play Store.
2. Install it in your Device.
3. Open Total Commander and goto Root of System. (/ )
4. Open the etc folder.
5. Find the file named "hosts", and hold it for 3 seconds. Choose edit file, and choose Total Commander Text Editor if prompted.
6. Delete everything and paste this at the first line: " 127.0.0.1 localhost". Copy it exactly, dont modify anything.
7. Save the file and overwrite if needed.
Click to expand...
Click to collapse
Eh... Why would blocking your own local device help fix Google Play? Last time I set that on my laptop, my entire internet rolled over and died...
ShadowLea said:
No, he's in GMT+8, that much is correct. (The forum displays your own timezone as the posting time.) But it does appear to be off by about 10 minutes.
Click to expand...
Click to collapse
Ah silly me. I guess I haven't fully awaken yet , it's earlier morning here. Smh.
Sent from my SM-N900T using xda app-developers app
Eh... Why would blocking your own local device help fix Google Play? Last time I set that on my laptop, my entire internet rolled over and died...
Click to expand...
Click to collapse
I never block, there was an entry added there automatically. No idea. So I removed and left only localhost then relaunched google play and everything worked smoothly
sam20e said:
I never block, there was an entry added there automatically. No idea. So I removed and left only localhost then relaunched google play and everything worked smoothly
Click to expand...
Click to collapse
Yeah, that's what your host file should have in it. Not sure why there was something else there. My only guess is that you installed a none Google play app that messed with it (I would say don't use that app, it's up to no good).
Sent from my SM-N900T using xda app-developers app
I am sure this is answered somewhere but it's hard to find. Apologies.
I am on JSS15Q, rooted, TWRP installed with no issues. I would like to permanently get rid of the upgrade nag message (I can temp get rid of it by accepting the upgrade and letting it fail).
I don't see any value in installing the upgrade.
Can you help ?
Thanks.
Get AutoRun Manager from the PlayStore.
Autorun manager - advanced mode, then in settings check 'show system entries' and then find Google services framework, and disable the one with 'system update receiver' in the name.
danvee said:
Get AutoRun Manager from the PlayStore.
Autorun manager - advanced mode, then in settings check 'show system entries' and then find Google services framework, and disable the one with 'system update receiver' in the name.
Click to expand...
Click to collapse
Thanks, installed, settings changed etc. but not understanding/seeing "the one with 'system update receiver' in the name"
Why don't you want to install the update?
homemadehitshow said:
Thanks, installed, settings changed etc. but not understanding/seeing "the one with 'system update receiver' in the name"
Click to expand...
Click to collapse
Do you have 'show system entries' enabled in settings?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
detonation said:
Why don't you want to install the update?
Click to expand...
Click to collapse
(a) It will not install because I am rooted and have TWRP (b) too many stories of people with no problems getting them after the update.
For a more major update I would do it but if it aint broke I aint fixing it.
danvee said:
Do you have 'show system entries' enabled in settings?
Click to expand...
Click to collapse
Yes, just didn't know which one to go after.
homemadehitshow said:
Yes, just didn't know which one to go after.
Click to expand...
Click to collapse
As show in the image. At the bottom- "system update service receiver".
Go to settings then apps then swipe left to all and click on Google services framework and untick show notifications
>^.^< Sent From Meow HTC One
DowntownJeffBrown said:
Go to settings then apps then swipe left to all and click on Google services framework and untick show notifications
Click to expand...
Click to collapse
Will that work on a stock N7, too? Or only rooted?
Looks like it to me... Running locked, unrooted Stock.
Vmurph said:
Will that work on a stock N7, too? Or only rooted?
Click to expand...
Click to collapse
It should work on stock I don't see why it wouldn't. But I root everything so I'm not sure lol
>^.^< Sent From Meow HTC One
Awesome, thanks! What other notifications is the 'Google Services Framework' responsible for? In other words, if I turn off its notifications, will I miss any other important notifications, besides the firmware update nag??
More easy way.
Long click on the notification - select information and then stop.
Sent from my Nexus 7 using Tapatalk
danvee said:
Get AutoRun Manager from the PlayStore.
Autorun manager - advanced mode, then in settings check 'show system entries' and then find Google services framework, and disable the one with 'system update receiver' in the name.
Click to expand...
Click to collapse
Cool, and thanks. Gonna give it a shot. I see two apps called "AutoRun Manager" though. This one and this one. Does it matter which one? Would either work?
EDIT TO ADD: I just tried the first one (as it matched your screenshot.) I went to Settings and enabled "Show system entries" as well as "Enable System app disable." Then when I went to the Google Services Framework and expanded it, I see that "com.google.android.gsf.update.SystemUpdateService&Receiver" was already disabled. I have never done this before and I'm on stock Android, KitKat 4.4.4, rooted via towelroot. So now I am wondering, does towelroot disable this by default, by any chance? Just wondering if I need to do anything further, and why this would be disabled for me already. Does it get enabled by some other mechanism, when an update is actually out?
Vmurph said:
DowntownJeffBrown said:
Go to settings then apps then swipe left to all and click on Google services framework and untick show notifications
Click to expand...
Click to collapse
Awesome, thanks! What other notifications is the 'Google Services Framework' responsible for? In other words, if I turn off its notifications, will I miss any other important notifications, besides the firmware update nag??
Click to expand...
Click to collapse
Good question, I am wondering about that too.
Sensamic said:
More easy way.
Long click on the notification - select information and then stop.
Click to expand...
Click to collapse
Seems to me that would just prevent the notification, but the update would still be downloaded and waiting to install. Am I wrong about that? I want to block any system update entirely (until I am good and ready for it, until Lollipop is properly rooted, etc.) I don't want it to download, I don't want to be nagged about it, I don't want my Nexus 7 to know about it at all. I'm thinking danvee's solution is more in line with that than simply "blocking the notification."
Rooted my S7E, and just noticed that the common Samsung dialer codes (as *#0*# or even *#06#) do no longer work!
When I enter them into the dialer nothing happens! I used them successfully before!
Only change is that I installed TWRP, root and Viper!
Do dialer codes work on your phone after root?
Sent from my SM-G935F using XDA-Developers mobile app
Yes, it works for me.
That's very strange. Root shouldn't affect those codes as they are generic for all devices.
TML1504 said:
Rooted my S7E, and just noticed that the common Samsung dialer codes (as *#0*# or even *#06#) do no longer work!
When I enter them into the dialer nothing happens! I used them successfully before!
Only change is that I installed TWRP, root and Viper!
Do dialer codes work on your phone after root?
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Depends on the rom I find. Echoerom working good for me.
Sent from my Pebble Time
Thx for the replies!
For me this is also strange, I can't remember that this was the case anytime before I rooted an android device!
Anyone else with this problem?
Sent from my SM-G935F using XDA-Developers mobile app
Did you perhaps install the Google Phone application? I installed it and can't use dialer codes with it. If I switch back to the stock Samsung Phone application it works again.
mcfly76 said:
Did you perhaps install the Google Phone application? I installed it and can't use dialer codes with it. If I switch back to the stock Samsung Phone application it works again.
Click to expand...
Click to collapse
phone is pure stock, only thing I did was rooting with TWRP and CF-root, and installing viper4android
0verdaflow said:
try another version and see if that fixes it
Click to expand...
Click to collapse
another version of what?
another rom? i think this would fix it, but it would be interessting for me WHAT caused this behaviour !
I had this problem once. Factory reset did the trick for me
Solution to failed dialler codes
Boot into recovery using vol up+home button + power button.Then wipe cache in the recovery and reboot.I hope that solves it.
S7 Edge G935V
Yes My husband replaced the stock Rom on my rooted S7 G935v and the codes didn't work afterwards
maybe the feature was turned off during the root process. use a file browser with root permissions and navigate to the lowest level and go to-- /efs/carrier --then long press hidden menu and open it with a text editor. Using capital letters just change the OFF to ON then save it, reboot and try your codes again. :highfive:
kanesglove said:
maybe the feature was turned off during the root process. use a file browser with root permissions and navigate to the lowest level and go to-- /efs/carrier --then long press hidden menu and open it with a text editor. Using capital letters just change the OFF to ON then save it, reboot and try your codes again. :highfive:
Click to expand...
Click to collapse
I can't find the folder /carrier
Same thing here
try using the search feature in file browser. make sure it has root access with permissions granted.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
kanesglove said:
View attachment 5396149
Click to expand...
Click to collapse
Check this no folder named carrier at all
Umar Sabo said:
Check this no folder named carrier at all
Click to expand...
Click to collapse
I see that. Do you use the stock rom? See if you have the actual apk file in your system apps
if you don't have the apk file I think I can send mine. I'm pretty sure if you manually inset the apk in the system folder and change the permissions to match what the other apps in the folder have it should work. I mean you may have to create a couple other files though like the carrier folder and the document in it.
Hello,
Is there a way to enable, Software navigation buttons on Mi A1.
As the hardware capacitive keys, are positioned in chinese format, "back key" is on right, where as it should be on left.
Add this line to build.prop and reboot:
qemu.hw.mainkeys=0
Could it be possible in future to swap back and multitasking buttons and turn off the button light?
Aman301582 said:
Could it be possible in future to swap back and multitasking buttons and turn off the button light?
Click to expand...
Click to collapse
back there when I use Oneplus you have to edit Generic.kl file located at system/usr/keylayout
since Oneplus have stock AOSP based ROM just like Mi A1, it should be the same, or similar.
ñ
anyone knows how to turn off the light on the a1?
cano1098 said:
anyone knows how to turn off the light on the a1?
Click to expand...
Click to collapse
uses this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Mi A1 using Tapatalk
ghpranav said:
Add this line to build.prop and reboot:
qemu.hw.mainkeys=0
Click to expand...
Click to collapse
Does this also disable hardware buttons?
MrPhilo said:
Does this also disable hardware buttons?
Click to expand...
Click to collapse
No. It just enables soft keys. To disable hw keys
Using root explorer Go to system/usr/keylayout
edit the ft5435_ts.kl and add # before menu home and back..save and reboot..both light and hw keys will be disabled..
Found an app on play store to swap back and recent key. Upgrade to pro is needed. I tried the app and it works great but ram consumed is above 200mb. Button mapper.
hw key disabled but light still on.
rexisrex said:
No. It just enables soft keys. To disable hw keys
Using root explorer Go to system/usr/keylayout
edit the ft5435_ts.kl and add # before menu home and back..save and reboot..both light and hw keys will be disabled..
Click to expand...
Click to collapse
hw key disabled but light still on.
how to turn them off?
Rbell said:
hw key disabled but light still on.
how to turn them off?
Click to expand...
Click to collapse
Replace services.jar file attached to system/framework. Backup old file. Replace the new file and set permission to 644.
Delete services.odex file from system/framework/oat/arm64
Restart. Done.
This can be achieved from GravityBox( xposed module ) under 'Navigation bar Tweaks' enable master switch and tick 'Enable navigation bar' check box and restart your device.
Rbell said:
hw key disabled but light still on.
how to turn them off?
Click to expand...
Click to collapse
You can't.
Rbell said:
hw key disabled but light still on.
how to turn them off?
Click to expand...
Click to collapse
Me too encountered the same problem. I've tried lot of methods but anything doesn't worked for me.
After lot of trials, I found disable backlight option in gravity box after installing xposed.
Hit thanks if it worked for you.
---------- Post added at 07:32 PM ---------- Previous post was at 07:27 PM ----------
rexisrex said:
Replace services.jar file attached to system/framework. Backup old file. Replace the new file and set permission to 644.
Delete services.odex file from system/framework/oat/arm64
Restart. Done.
Click to expand...
Click to collapse
My mobile struck on boot after doing this.
I installed the whole system again.
Does this method works for you?
If yes tell me which firmware you are on? October or September
Vasu Netha said:
Me too encountered the same problem. I've tried lot of methods but anything doesn't worked for me.
After lot of trials, I found disable backlight option in gravity box after installing xposed.
Hit thanks if it worked for you.
Click to expand...
Click to collapse
I finally got it to work with the app "Keyboard backlight controller"
osrox said:
...As the hardware capacitive keys, are positioned in chinese format, "back key" is on right, where as it should be on left.
Click to expand...
Click to collapse
Hi, you can try it with this app(I used it and it worked but with another manufacturer, not xiaomi):
Buttons remapper
To Disable the capacitive button lights download 'Keyboard Backlight Controller' or just edit 'brightness' in /sys/class/leds/button-backlight folder. Change to 0 and reboot
MrPhilo said:
To Disable the capacitive button lights download 'Keyboard Backlight Controller' or just edit 'brightness' in /sys/class/leds/button-backlight folder. Change to 0 and reboot
Click to expand...
Click to collapse
Can you please upload screen shot?
I can't find where to change to 0.
I'm using 'keyboard Backlight Controller' but some times I need to change it again.
editing build.prop
I've flashed stick rom.
After rooting i have problem editing build.prop.
what can i do?
Damn!!! so easy for do that bro...
using this app "Device Control [root] " on google play store
try and see bro...
*btw your devices must root
OK, I just received this device:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
which is sold under various names from vendors @AliExpress.
I'm trying to match this unit with one of the threads here and it seems like no one is dealing with it, but I may have missed some relevant posts, can you please help me with that? Or maybe you know about other forums where they discuss the unit...
The device has several issues (bottom line: do not buy it, the hardware is okish but the software is horrible) and I'd really like to explore ways to customize it but I'm not even able to connect to it via adb, let alone become root or install a custom firmware...
Seem like no one heard of it. Bad luck.
I'm trying to gain root access and fix some of the bull***, but I'm running short of options.
What I know so far:
Invoking "su" from the command line (or via adb) returns a "not allowed" message;
I have no firmware to patch with magisk;
the amazing temp root does not work, the device is patched.
What else could I try?
I may try the MTK Droid Tools, but I think they use the same exploit used by the amazing temp root so I guess this is not a solution. Moreover they need Windows and I can't connect to the unit with adb in windows, only with Linux (heavens know why, the Universal ADB Drivers says it's all "ok" but adb does not see the device).
Did you get anywhere with it? I just got 825x_pro for my R56 Mini.
Nowhere. There seem to be some info in the 4pda.ru forum (in russian) but I did not dig deep into into.
What's your factory setting password? 1812 takes me to factory settings and 8877 takes me to another menu which I can use to go to engineer mode
How and where to use these codes
Fake device tester says that it is android 9 instead of 10
amit1976 said:
Fake device tester says that it is android 9 instead of 10
Click to expand...
Click to collapse
What tester? Have you got a link so I could check mine please?
Have you found where to put these codes?
brodzik said:
What tester? Have you got a link so I could check mine please?
Have you found where to put these codes?
Click to expand...
Click to collapse
There are many apps on playstore , i used fake device test by appsolutely unique
amit1976 said:
There are many apps on playstore , i used fake device test by appsolutely unique
Click to expand...
Click to collapse
I just installed it and the app doesn't open, I mean the screen blinks like it's just about to start and then it goes back to home screen, any ideas?
Does anyone happen to know if there is custom rom that will work on this device please?
brodzik said:
What's your factory setting password? 1812 takes me to factory settings and 8877 takes me to another menu which I can use to go to engineer mode
Click to expand...
Click to collapse
Where to use the codes?
I got alps 825x_PRO. 10.1" It can't remember settings, video out is not working, lights are not working. Need reload firmware. So far I got 8888, 8877, 8878, for settings. But it won't remember. If anyone can help me where to get firmware. Seller Ossuret Factory Store is bad. Sending videos of different models and useless solutions. Refused to give me the firmware.
tefracky said:
Where to use the codes?
Click to expand...
Click to collapse
Hi,
You have to go to:
- The settings
- "Car infotaiment" and click in the high right corner on the "cogwheel" and you get a little window where you have to type the numbers (example: 5678; 8888, ....etc ) And you get the hidden menu !
brodzik said:
I just installed it and the app doesn't open, I mean the screen blinks like it's just about to start and then it goes back to home screen, any ideas?
Click to expand...
Click to collapse
Yup this was my experience of "Fake Device Software" Could it mean it is fake? I downloaded another and found the device advertising it's self as Android 10 but with an API level of 28 which relates to Android 9 or wear devices so ???