Database Users

can you please help me with this problem

i have LG G2 rooted with TWRP recovery
everything was good, till my device automatically downloaded official update from LG 13MB
i pressed installed by mistake then the device rebooted in TWRP and stuck there
i tried everything possible
i restarted the device but it still rebooting in TWRP only
i formatted devlic .. cash .. everything
i tried to download rooted room but the storage is not mounting
the device is not accessible anymore.. whatever i did return me in TWRP only
can you please help me with that ?

You haw in this section i think OP nickname vas tebuche haw tread for you problem
Sent from my LG-P700 using xda premium
---------- Post added at 12:24 AM ---------- Previous post was at 12:22 AM ----------
Howdy all!
Did you install TWRP and then take the OTA, now you can't get your phone to boot normally, but you do see TWRP?
Here's the easy fix:
If you have ADB access, plug in your phone and run this:
Then you should be able to successfully reboot your phone via the TWRP menu option, or via a simple reboot command in adb.
If you DONT have ADB access (because of an early build of TWRP), you can simply use TWRP's awesome "terminal command" option to run the following:
You'll have to type that whole thing out, and be VERY careful with spaces and punctuation. One wrong letter and you could nuke your phone.
After that finishes, you can reboot and continue on your happy way!
Let me know if this helps anyone!
As usual, I'm on #lg-g2 in Freenode as IOMonster, if I'm around I'll be happy to help wherever I can.
Sent from my LG-P700 using xda premium

thanks
but i didn't get it
what should i type in the terminal ?
-----
thanks i just google that and i found the web page
http://forum.xda-developers.com/showthread.php?t=2451696
i tried that via terminal
i did a reboot after that and it didn't take me to TWRP again but
still on LG logo for five mins till now

kainmat1 said:
thanks
but i didn't get it
what should i type in the terminal ?
Click to expand...
Click to collapse
try holding the power buttons for ten seconds or more if it boots into twrp and then just reflash your rom?

As usual, I'm on #lg-g2 in Freenode as IOMonster, if I'm around I'll be happy to help wherever I can.
Sent from my LG-P700 using xda premium[/QUOTE]
This guy helped me out from a total loss, he went wayyy out of his way to help me. He knows his stuff!
Sent from my VS980 4G using Xparent SkyBlue Tapatalk 2

i am on stock rom
i rooted it and install TWRP so i don't have any room in my sd card to install
after i used the method with terminal now its not taking me to TWRP again but stuck in LG logo
i tried to force to reboot holding the power and vol down .. but its not taking me to TWRP this time
now stuck in LG logo only.

Easy fix
kainmat1 said:
i am on stock rom
i rooted it and install TWRP so i don't have any room in my sd card to install
after i used the method with terminal now its not taking me to TWRP again but stuck in LG logo
i tried to force to reboot holding the power and vol down .. but its not taking me to TWRP this time
now stuck in LG logo only.
Click to expand...
Click to collapse
I screwed my phone too the day after I got lol but no worries its easy to fix. You just need to download a stock ROM and flash it, you don't even lose any data.
Just follow this simple guide.
http://forum.xda-developers.com/showthread.php?t=2432476

Your problem is you cannot read.

StarFighter said:
Your problem is you cannot read.
Click to expand...
Click to collapse
Amen to that.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

StarFighter said:
Your problem is you cannot read.
Click to expand...
Click to collapse
no dude ,, i tried to flash the stock Rom by following the steps but when extracting reached like 4% the process failed
i tried to flash A,B,C stock roms and still the same
anyway i got it solved and i'll post it in case anyone else need it
from the LG utility go to Options - Update my recovery - it will ask for the IMEI then it will start downloading a full room 1.9gb
after that i got it successfully flashed finally
thank you very much guys

kainmat1 said:
no dude ,, i tried to flash the stock Rom by following the steps but when extracting reached like 4% the process failed
i tried to flash A,B,C stock roms and still the same
anyway i got it solved and i'll post it in case anyone else need it
from the LG utility go to Options - Update my recovery - it will ask for the IMEI then it will start downloading a full room 1.9gb
after that i got it successfully flashed finally
thank you very much guys
Click to expand...
Click to collapse
Nice
Sent from my LG-P700 using xda premium

Can't SBF back to stock with RSD v6.1.5

I am trying to get back to stock with the VRZ_XT907_9.8.1Q-94-1_CFC.xml and keep getting failure, even after deleting the "getvar" lines, any help would be appreciated. Any ideas? I was on the latest firmware.

VannMann said:
I am trying to get back to stock with the VRZ_XT907_9.8.1Q-94-1_CFC.xml and keep getting failure, even after deleting the "getvar" lines, any help would be appreciated. Any ideas? I was on the latest firmware.
Click to expand...
Click to collapse
SS or errors & etc?
Did you do md5 ck?

If I try to boot normally, i go straight to the "Rage M" Screen and sit there. Checking MD5 now.
MD5 checks out OK

VannMann said:
If I try to boot normally, i go straight to the "Rage M" Screen and sit there. Checking MD5 now.
Click to expand...
Click to collapse
You are locked, did you go stk recovery & wipe data?

aviwdoowks said:
You are locked, did you go stk recovery & wipe data?
Click to expand...
Click to collapse
Can't get into it. Goes straight to the "Rage M" logo, and then to the triangle screen

VannMann said:
Can't get into it. Goes straight to the "Rage M" logo, and then to the triangle screen
Click to expand...
Click to collapse
Damn moto engineers!
@ the dead robot press both vol keys for 2-3 sec!
The secret code of motoyoyo!

aviwdoowks said:
Damn moto engineers!
@ the dead robot press both vol keys for 2-3 sec!
The secret code of motoyoyo!
Click to expand...
Click to collapse
I can get out of triangle, no problem. I did just get into stock recovery. Anything i can do from there? Already wiped data and cache.

VannMann said:
I can get out of triangle, no problem. I did just get into stock recovery. Anything i can do from there? Already wiped data and cache.
Click to expand...
Click to collapse
No I ... nvm. IDNK
A ss & the text of the whole error

This is the error I get. And if i remove the getvar line, it just goes down to the next one and fails, and so on. I was using the safestrap 3.12
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

VannMann said:
This is the error I get. And if i remove the getvar line, it just goes down to the next one and fails, and so on. I was using the safestrap 3.12View attachment 2514515
Click to expand...
Click to collapse
Why is there: filename.xml\filename.xml\filename.xml
In the rsd file window?

aviwdoowks said:
Why is there: filename.xml\filename.xml\filename.xml
In the rsd file window?
Click to expand...
Click to collapse
I have ran it from zip and unzip format. Still fail.

VannMann said:
I have ran it from zip and unzip format. Still fail.
Click to expand...
Click to collapse
I think you must do it from a "free" folder!!!!
The xml & all files must be in a "extracted" folder
---------- Post added at 08:47 PM ---------- Previous post was at 08:37 PM ----------
VannMann said:
I have ran it from zip and unzip format. Still fail.
Click to expand...
Click to collapse
You can run a windows .exe from with in a zip but not the target of rsd.
---------- Post added at 08:59 PM ---------- Previous post was at 08:47 PM ----------
VannMann said:
I have ran it from zip and unzip format. Still fail.
Click to expand...
Click to collapse
Both of you have the same root problem it seems.
http://forum.xda-developers.com/showthread.php?t=2606422
---------- Post added at 09:18 PM ---------- Previous post was at 08:59 PM ----------
VannMann said:
I have ran it from zip and unzip format. Still fail.
Click to expand...
Click to collapse
This may help.
http://forum.xda-developers.com/showpost.php?p=40929335&postcount=1

http://forum.xda-developers.com/showthread.php?t=2176753

Problem solved! Found a different cable and all is well now! Thanks for your help, aviwdoowks!

What a Drama!!

aviwdoowks said:
What a Drama!!
Click to expand...
Click to collapse
Wahahahahahahaha, lol. Thanks again for all the help! :highfive:

I'm having trouble with rsd also. When I choose my file I get a dm error. I'm try to go back to stock from stock. Never rooted or anything like that. Just trying to unlock for att and going back to stock and trying again is my only option

Last hope to rescue Nexus 6p stuck in Bootloop of death(BLOD)

As you know lots of devices are facing this issue where the device is in bootloop and the bootloader is locked.
I have last hope that if anyone can help me with any one of the solution, I can rescue my nexus 6p.
Device info:
Rom: Android 7.1.1 stock rom
Bootloader: Locked (OEM unlocking not enabled in developer options)
Warranty: Ended on 14th feb 2017
Huawei said motherboard will cost Rs.28000 i.e $400 approx.
I can boot into bootloader menu and recovery as well.
I tried sideloading the OTA zips from google, it flashes successfully but still bootloops.
Note: My device didn't reboot after 90 seconds when it was in bootloader menu also I as I can sideload OTAs successfully, I don't really think that its an hardware issue.
I have 2 options as my last resort.
1. I've read that if you unenroll from Android BETA program, you get an OTA update which wipes your entire device.
BUT for this I must be able to boot which I cannot.
HELP: Can anyone provide me the BETA unenrolled OTA link so that I can try sideloading it?
2. I've also read that we can flash all partitions of nexus 6p in EDL mode refer:https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
Files included in zip are attached below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HELP: As per thread only way to boot into EDL mode is by ADB which I can't access as my phone doesn't boot up.
Can anyone help me with booting my device into EDL mode so that I can try flashing this file.
* I CAN'T AFFORD NEW MOTHERBOARD, I'm just a student.

aakash dabrase said:
I have 2 options as my last resort..
Click to expand...
Click to collapse
Sorry, but your only option is a new phone.

v12xke said:
Sorry, but your only option is a new phone.
Click to expand...
Click to collapse
me i have the same prob but my phone unloked and i can enter in fastboot mode i have chance to rescue my phone

leroilion02 said:
me i have the same prob but my phone unloked and i can enter in fastboot mode i have chance to rescue my phone
Click to expand...
Click to collapse
You are hijacking another thread. Back in the first thread you started on this same topic: https://forum.xda-developers.com/member.php?u=5737579 Enter those commands in fastboot and capture the resulting text. Please post the results in your original post. Not here.

v12xke said:
You are hijacking another thread. Back in the first thread you started on this same topic: https://forum.xda-developers.com/member.php?u=5737579 Enter those commands in fastboot and capture the resulting text. Please post the results in your original post. Not here.
Click to expand...
Click to collapse
please bro can you tell me what i can do step by step

Have you tried to wipe data and cache I recovery?

leroilion02 said:
please bro can you tell me what i can do step by step
Click to expand...
Click to collapse
I already did 3 days ago in the first thread you started on this:
https://forum.xda-developers.com/showpost.php?p=71699404&postcount=15

I have the same problem with my Nexus 6p. I have switched to an iphone 7.
Is Google a serious organization to let so many users suffer because of their problems? I mean this really HAS to be seriously unethical company to do this. As for Huawei, well- we should have known and expected such behavior. At the end of the day it is a Chinese brand... so it needs to maintain its low levels of reputation to be worthy of its fine name.

Bricked phone. Being a massive dumbass

Hey. I've bricked my Huawei P10 lite, literally just for the sole reason alone that I'm an idiot. I was in the process of relocking/unrooting when I did a massive choke - I've relocked the bootloader and IMMEDIATELY closed the goddamn tab. I haven't written the code down anywhere. When I've rebooted my phone, I discovered I have exactly 0 ways of doing a wipe, since the TWRP was obviously gone.
Hitools returns that the phone cannot be recovered due to not being supported.
Recovery? There isn't one. eRecovery always returns "failed to get.." yatta yatta yatta, It's not working.
The only thing currently reacting to my commands is fastboot. And, being the mr. obvious, I cannot push files onto the phone through fastboot to restore it by the full package, which was pretty much my only option at this point.
There aren't any replacement motherboards available for the P10 lite on eBay or pretty much anywhere else I could think of.
If there exists any good soul that can tell me if this is in any imaginable way reversible without getting a cracked screen phone and swapping the motherboards, PLEASE, PLEASE, do tell me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you.

INB4 anyone asks - No, I don't have the numbers to generate the code again either. At least not the serial id, i think.

EvESpirit said:
INB4 anyone asks - No, I don't have the numbers to generate the code again either. At least not the serial id, i think.
Click to expand...
Click to collapse
Did u tryed to flash original firmware by the dload method?
You don need unlocked boatloader for that. I already save my p10 few times.

hdemary said:
Did u tryed to flash original firmware by the dload method?
You don need unlocked boatloader for that. I already save my p10 few times.
Click to expand...
Click to collapse
How can I flash the original firmware? I can't even flash a recovery. The bootloader is l o c k e d, and the only thing I can access is fastboot. How am I supposed to push the files into the phones in fastboot???

EvESpirit said:
How can I flash the original firmware? I can't even flash a recovery. The bootloader is l o c k e d, and the only thing I can access is fastboot. How am I supposed to push the files into the phones in fastboot???
Click to expand...
Click to collapse
Man if you can't even google dload method to find out how to return to stock you r screwed.
But anyways i will help you with that: http://lmgtfy.com/?q=huawei+p10+lite+dload+method

I DO NO HAVE A WAY TO PUSH THE REQUIRED FILES INTO THE DEVICE FOR THE REASONS OF LOCKED BOOTLOADER, NO RECOVERY AND NO WAY TO BOOT INTO THE SYSTEM. If you would kindly tell me how tf would it work from an OTG flash device, go ahead. Spoiler alert: It won't
MOD EDIT: Mind your language

EvESpirit said:
I DO NO HAVE A WAY TO PUSH THE REQUIRED FILES INTO THE DEVICE FOR THE REASONS OF LOCKED BOOTLOADER, NO RECOVERY AND NO WAY TO BOOT INTO THE SYSTEM. If you would kindly tell me how tf would it work from an OTG flash device, go ahead. Spoiler alert: It won't
Click to expand...
Click to collapse
Man as your post title says, you really are a massive dumbass, if you at least try to help your self with the link i send you u will see that dload method dont need to boot into system, no need for recovery and no need for unlocked boatloader, only an sd card with a folder that have original firmware for your variant.
But as you rude keep your phone as a brick.
Regards!

EvESpirit said:
I DO NO HAVE A WAY TO PUSH THE REQUIRED FILES INTO THE DEVICE FOR THE REASONS OF LOCKED BOOTLOADER, NO RECOVERY AND NO WAY TO BOOT INTO THE SYSTEM. If you would kindly tell me how tf would it work from an OTG flash device, go ahead. Spoiler alert: It won't
MOD EDIT: Mind your language
Click to expand...
Click to collapse
Mind your language my friend.
This is an official caution for you.
If you have any doubts, check the FORUM rules

EvESpirit said:
>mfw mods ignore somebody attacking someone first and call me out for using bad language+edit the comment, yet still leave the actual swear happen without deleting
OMEGALUL so relevant
@hdemary If you would kindly learn to read. For the third time I'm telling you that ThErE Is No Way For Me to PUSH the FILES to the PHONE. I do not have an unlocked bootloader nor a functioning recovery AND NO DEVICE to put them on. Also nice OP dodge, but I guess that's just them being unbiasedly biased.
Click to expand...
Click to collapse
My last post in this thread.
Why u ask for help in the first place if you won´t accept?
Have fun with your bricked device!
Best of the best Regards! :angel:

Well, seems this thread has run its course
Thread closed

Help please maybe my phone bricked or dead

Help please i just brick my phone after try to flash twrp .
i had a global rom miui 11. now the phone is empty no rom or system at all ):
i can get to fastboot mode. or twrp. i try to use mi flash ro mi flash pro to flash firmware back, but its failed.
have No OS at all all deleted ///
when i turn on the phone i can see the MI logo and after that it jump to fastboot .
i hopeless .... ):
thank for help !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

So what's your Problem? You got twrp working? Just flash any (custom) Rom from there

I second what he said format your data, and internal storage so it's clean. Than download latest stable MIUI from here. https://xiaomi.eu/community/threads/miui-11-0-stable-release.52628/
After that click install wait and it should be all fine. Luckily you didn't get a fastboot loop that was an annoying one to figure out first time. Good luck

xytkhi said:
Help please i just brick my phone after try to flash twrp .
i had a global rom miui 11. now the phone is empty no rom or system at all ):
i can get to fastboot mode. or twrp. i try to use mi flash ro mi flash pro to flash firmware back, but its failed.
have No OS at all all deleted ///
when i turn on the phone i can see the MI logo and after that it jump to fastboot .
i hopeless .... ):
thank for help !
Click to expand...
Click to collapse
Hello bro, don't Panic if your boot loader is unlockled, and you can see fastboot and enter recovery mode you can save your phone, yesterday I was like this, I live in mexico and my light went off while i was flashing my 9T.
I followed this guide.
https://forum.xda-developers.com/k20-pro/how-to/xiaomi-mi9t-k20-hard-brick-recover-t4037591/page3
I didnt have to go to EDL mode, I just skipped that part and flashed my regular global room. instead the chinese one and my phone came back from graveyard. good luck.

Kireyev said:
I second what he said format your data, and internal storage so it's clean. Than download latest stable MIUI from here. https://xiaomi.eu/community/threads/miui-11-0-stable-release.52628/
After that click install wait and it should be all fine. Luckily you didn't get a fastboot loop that was an annoying one to figure out first time. Good luck
Click to expand...
Click to collapse
hey sir I must say that I did it yesterday and it was great. what do say here, I did it end it's save my phone! thank you very much sir. :good:

xytkhi said:
hey sir I must say that I did it yesterday and it was great. what do say here, I did it end it's save my phone! thank you very much sir. :good:
Click to expand...
Click to collapse
glad it worked out